1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: "http://devicetree.org/schemas/spi/qcom,spi-qcom-qspi.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Qualcomm Quad Serial Peripheral Interface (QSPI)
maintainers:
- Bjorn Andersson <bjorn.andersson@linaro.org>
description: The QSPI controller allows SPI protocol communication in single,
dual, or quad wire transmission modes for read/write access to slaves such
as NOR flash.
allOf:
- $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
items:
- enum:
- qcom,sc7180-qspi
- qcom,sc7280-qspi
- qcom,sdm845-qspi
- const: qcom,qspi-v1
reg:
maxItems: 1
interrupts:
maxItems: 1
clock-names:
items:
- const: iface
- const: core
clocks:
items:
- description: AHB clock
- description: QSPI core clock
interconnects:
minItems: 1
maxItems: 2
interconnect-names:
minItems: 1
items:
- const: qspi-config
- const: qspi-memory
required:
- compatible
- reg
- interrupts
- clock-names
- clocks
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
soc: soc {
#address-cells = <2>;
#size-cells = <2>;
qspi: spi@88df000 {
compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
reg = <0 0x88df000 0 0x600>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "iface", "core";
clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
<&gcc GCC_QSPI_CORE_CLK>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
};
};
};
...
|
