1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
|
# SPDX-License-Identifier: GPL-2.0
# Copyright (C) 2021 Sebastian Reichel
%YAML 1.2
---
$id: "http://devicetree.org/schemas/power/supply/bq2415x.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: Binding for TI bq2415x Li-Ion Charger
maintainers:
- Sebastian Reichel <sre@kernel.org>
allOf:
- $ref: power-supply.yaml#
properties:
compatible:
enum:
- ti,bq24150
- ti,bq24150
- ti,bq24150a
- ti,bq24151
- ti,bq24151a
- ti,bq24152
- ti,bq24153
- ti,bq24153a
- ti,bq24155
- ti,bq24156
- ti,bq24156a
- ti,bq24158
reg:
maxItems: 1
ti,current-limit:
$ref: /schemas/types.yaml#/definitions/uint32
description: initial maximum current charger can pull from power supply in mA.
ti,weak-battery-voltage:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
weak battery voltage threshold in mV.
The chip will use slow precharge if battery voltage is below this value.
ti,battery-regulation-voltage:
$ref: /schemas/types.yaml#/definitions/uint32
description: maximum charging voltage in mV.
ti,charge-current:
$ref: /schemas/types.yaml#/definitions/uint32
description: maximum charging current in mA.
ti,termination-current:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
charge will be terminated when current in constant-voltage phase drops
below this value (in mA).
ti,resistor-sense:
$ref: /schemas/types.yaml#/definitions/uint32
description: value of sensing resistor in milliohm.
ti,usb-charger-detection:
$ref: /schemas/types.yaml#/definitions/phandle
description: phandle to usb charger detection device (required for auto mode)
required:
- compatible
- reg
- ti,current-limit
- ti,weak-battery-voltage
- ti,battery-regulation-voltage
- ti,charge-current
- ti,termination-current
- ti,resistor-sense
additionalProperties: false
examples:
- |
i2c0 {
#address-cells = <1>;
#size-cells = <0>;
charger@6b {
compatible = "ti,bq24150a";
reg = <0x6b>;
ti,current-limit = <100>;
ti,weak-battery-voltage = <3400>;
ti,battery-regulation-voltage = <4200>;
ti,charge-current = <650>;
ti,termination-current = <100>;
ti,resistor-sense = <68>;
ti,usb-charger-detection = <&isp1704>;
};
};
|
