blob: 7c7e972aaa423e18b828cb7baef14ab0462621d9 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
|
Freescale i.MX General Power Controller v2
==========================================
The i.MX7S/D General Power Control (GPC) block contains Power Gating
Control (PGC) for various power domains.
Required properties:
- compatible: Should be one of:
- "fsl,imx7d-gpc"
- "fsl,imx8mq-gpc"
- reg: should be register base and length as documented in the
datasheet
- interrupts: Should contain GPC interrupt request 1
Power domains contained within GPC node are generic power domain
providers, documented in
Documentation/devicetree/bindings/power/power_domain.txt, which are
described as subnodes of the power gating controller 'pgc' node,
which, in turn, is expected to contain the following:
Required properties:
- reg: Power domain index. Valid values are defined in
include/dt-bindings/power/imx7-power.h for fsl,imx7d-gpc and
include/dt-bindings/power/imx8m-power.h for fsl,imx8mq-gpc
- #power-domain-cells: Should be 0
Optional properties:
- power-supply: Power supply used to power the domain
- clocks: a number of phandles to clocks that need to be enabled during
domain power-up sequencing to ensure reset propagation into devices
located inside this power domain
Example:
gpc: gpc@303a0000 {
compatible = "fsl,imx7d-gpc";
reg = <0x303a0000 0x1000>;
interrupt-controller;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <3>;
interrupt-parent = <&intc>;
pgc {
#address-cells = <1>;
#size-cells = <0>;
pgc_pcie_phy: power-domain@1 {
#power-domain-cells = <0>;
reg = <1>;
power-supply = <®_1p0d>;
};
};
};
Specifying power domain for IP modules
======================================
IP cores belonging to a power domain should contain a 'power-domains'
property that is a phandle for PGC node representing the domain.
Example of a device that is part of the PCIE_PHY power domain:
pcie: pcie@33800000 {
reg = <0x33800000 0x4000>,
<0x4ff00000 0x80000>;
/* ... */
power-domains = <&pgc_pcie_phy>;
/* ... */
};
|
