1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7986-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek MT7986 Pin Controller
maintainers:
- Sean Wang <sean.wang@kernel.org>
description: |+
The MediaTek's MT7986 Pin controller is used to control SoC pins.
properties:
compatible:
enum:
- mediatek,mt7986a-pinctrl
- mediatek,mt7986b-pinctrl
reg:
minItems: 8
maxItems: 8
reg-names:
items:
- const: gpio
- const: iocfg_rt
- const: iocfg_rb
- const: iocfg_lt
- const: iocfg_lb
- const: iocfg_tr
- const: iocfg_tl
- const: eint
gpio-controller: true
"#gpio-cells":
const: 2
description: |
Number of cells in GPIO specifier. Since the generic GPIO
binding is used, the amount of cells must be specified as 2. See the below
mentioned gpio binding representation for description of particular cells.
gpio-ranges:
minItems: 1
maxItems: 5
description: |
GPIO valid number range.
interrupt-controller: true
interrupts:
maxItems: 1
"#interrupt-cells":
const: 2
allOf:
- $ref: "pinctrl.yaml#"
required:
- compatible
- reg
- reg-names
- gpio-controller
- "#gpio-cells"
patternProperties:
'-pins$':
type: object
additionalProperties: false
patternProperties:
'.*mux.*':
type: object
additionalProperties: false
description: |
pinmux configuration nodes.
The following table shows the effective values of "group", "function"
properties and chip pinout pins
groups function pins (in pin#)
---------------------------------------------------------------------
"watchdog" "watchdog" 0
"wifi_led" "led" 1, 2
"i2c" "i2c" 3, 4
"uart1_0" "uart" 7, 8, 9, 10
"pcie_clk" "pcie" 9
"pcie_wake" "pcie" 10
"spi1_0" "spi" 11, 12, 13, 14
"pwm1_1" "pwm" 20,
"pwm0" "pwm" 21,
"pwm1_0" "pwm" 22,
"snfi" "flash" 23, 24, 25, 26, 27, 28
"spi1_2" "spi" 29, 30, 31, 32
"emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30,
31, 32
"spi1_1" "spi" 23, 24, 25, 26
"uart1_2" "uart" 29, 30, 31, 32
"uart1_1" "uart" 23, 24, 25, 26
"uart2_0" "uart" 29, 30, 31, 32
"spi0" "spi" 33, 34, 35, 36
"spi0_wp_hold" "spi" 37, 38
"uart1_3_rx_tx" "uart" 35, 36
"uart1_3_cts_rts" "uart" 37, 38
"uart2_1" "uart" 33, 34, 35, 36
"spi1_3" "spi" 33, 34, 35, 36
"uart0" "uart" 39, 40
"pcie_pereset" "pcie" 41
"uart1" "uart" 42, 43, 44, 45
"uart2" "uart" 46, 47, 48, 49
"emmc_51" "emmc" 50, 51, 52, 53, 54, 55, 56, 57, 57,
59, 60, 61
"pcm" "audio" 62, 63, 64, 65
"i2s" "audio" 62, 63, 64, 65
"switch_int" "eth" 66
"mdc_mdio" "eth" 67
"wf_2g" "wifi" 74, 75, 76, 77, 78, 79, 80, 81, 82, 83
"wf_5g" "wifi" 91, 92, 93, 94, 95, 96, 97, 98, 99, 100
"wf_dbdc" "wifi" 74, 75, 76, 77, 78, 79, 80, 81, 82, 83,
84, 85
$ref: "/schemas/pinctrl/pinmux-node.yaml"
properties:
function:
description: |
A string containing the name of the function to mux to the group.
There is no "audio", "pcie" functions on mt7986b, you can only use
those functions on mt7986a.
enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart,
watchdog, wifi]
groups:
description: |
An array of strings. Each string contains the name of a group.
There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm",
and "i2s" groups on mt7986b, you can only use those groups on
mt7986a.
required:
- function
- groups
allOf:
- if:
properties:
function:
const: audio
then:
properties:
groups:
enum: [pcm, i2s]
- if:
properties:
function:
const: emmc
then:
properties:
groups:
enum: [emmc, emmc_rst]
- if:
properties:
function:
const: eth
then:
properties:
groups:
enum: [switch_int, mdc_mdio]
- if:
properties:
function:
const: i2c
then:
properties:
groups:
enum: [i2c]
- if:
properties:
function:
const: led
then:
properties:
groups:
enum: [wifi_led]
- if:
properties:
function:
const: flash
then:
properties:
groups:
enum: [snfi]
- if:
properties:
function:
const: pcie
then:
properties:
groups:
enum: [pcie_clk, pcie_wake, pcie_pereset]
- if:
properties:
function:
const: pwm
then:
properties:
groups:
enum: [pwm0, pwm1_0, pwm1_1]
- if:
properties:
function:
const: spi
then:
properties:
groups:
enum: [spi0, spi0_wp_hold, spi1_0, spi1_1, spi1_2, spi1_3]
- if:
properties:
function:
const: uart
then:
properties:
groups:
enum: [uart1_0, uart1_1, uart1_2, uart1_3_rx_tx,
uart1_3_cts_rts, uart2_0, uart2_1, uart0, uart1, uart2]
- if:
properties:
function:
const: watchdog
then:
properties:
groups:
enum: [watchdog]
- if:
properties:
function:
const: wifi
then:
properties:
groups:
items:
enum: [wf_2g, wf_5g, wf_dbdc]
maxItems: 3
'.*conf.*':
type: object
additionalProperties: false
description: |
pinconf configuration nodes.
$ref: "/schemas/pinctrl/pincfg-node.yaml"
properties:
pins:
description: |
An array of strings. Each string contains the name of a pin.
There is no PIN 41 to PIN 65 above on mt7686b, you can only use
those pins on mt7986a.
items:
enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
WF1_HB8]
maxItems: 101
bias-disable: true
bias-pull-up: true
bias-pull-down: true
input-enable: true
input-disable: true
output-enable: true
output-low: true
output-high: true
input-schmitt-enable: true
input-schmitt-disable: true
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
mediatek,pull-up-adv:
description: |
Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
Pull up setings for 2 pull resistors, R0 and R1. Valid arguments
are described as below:
0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
mediatek,pull-down-adv:
description: |
Valid arguments for 'mediatek,pull-up-adv' are '0', '1', '2', '3'
Pull down setings for 2 pull resistors, R0 and R1. Valid arguments
are described as below:
0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
required:
- pins
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
pio: pinctrl@1001f000 {
compatible = "mediatek,mt7986a-pinctrl";
reg = <0 0x1001f000 0 0x1000>,
<0 0x11c30000 0 0x1000>,
<0 0x11c40000 0 0x1000>,
<0 0x11e20000 0 0x1000>,
<0 0x11e30000 0 0x1000>,
<0 0x11f00000 0 0x1000>,
<0 0x11f10000 0 0x1000>,
<0 0x1000b000 0 0x1000>;
reg-names = "gpio", "iocfg_rt", "iocfg_rb", "iocfg_lt",
"iocfg_lb", "iocfg_tr", "iocfg_tl", "eint";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pio 0 0 100>;
interrupt-controller;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
#interrupt-cells = <2>;
uart1_pins: uart1-pins {
mux {
function = "uart";
groups = "uart1";
};
};
uart2_pins: uart2-pins {
mux {
function = "uart";
groups = "uart2";
};
};
};
};
|
