1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/socionext,uniphier-usb3hs-phy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Socionext UniPhier USB3 High-Speed (HS) PHY
description: |
This describes the devicetree bindings for PHY interfaces built into
USB3 controller implemented on Socionext UniPhier SoCs.
Although the controller includes High-Speed PHY and Super-Speed PHY,
this describes about High-Speed PHY.
maintainers:
- Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
properties:
compatible:
enum:
- socionext,uniphier-pro5-usb3-hsphy
- socionext,uniphier-pxs2-usb3-hsphy
- socionext,uniphier-ld20-usb3-hsphy
- socionext,uniphier-pxs3-usb3-hsphy
- socionext,uniphier-nx1-usb3-hsphy
reg:
maxItems: 1
"#phy-cells":
const: 0
clocks:
minItems: 2
maxItems: 3
clock-names: true
resets:
maxItems: 2
reset-names: true
vbus-supply:
description: A phandle to the regulator for USB VBUS
nvmem-cells:
maxItems: 3
description:
Phandles to nvmem cell that contains the trimming data.
Available only for HS-PHY implemented on LD20 and PXs3, and
if unspecified, default value is used.
nvmem-cell-names:
items:
- const: rterm
- const: sel_t
- const: hs_i
description:
Should be the following names, which correspond to each nvmem-cells.
All of the 3 parameters associated with the above names are
required for each port, if any one is omitted, the trimming data
of the port will not be set at all.
allOf:
- if:
properties:
compatible:
contains:
const: socionext,uniphier-pro5-usb3-hsphy
then:
properties:
clocks:
minItems: 2
maxItems: 2
clock-names:
items:
- const: gio
- const: link
resets:
minItems: 2
maxItems: 2
reset-names:
items:
- const: gio
- const: link
- if:
properties:
compatible:
contains:
enum:
- socionext,uniphier-pxs2-usb3-hsphy
- socionext,uniphier-ld20-usb3-hsphy
then:
properties:
clocks:
minItems: 2
maxItems: 2
clock-names:
items:
- const: link
- const: phy
resets:
minItems: 2
maxItems: 2
reset-names:
items:
- const: link
- const: phy
- if:
properties:
compatible:
contains:
enum:
- socionext,uniphier-pxs3-usb3-hsphy
- socionext,uniphier-nx1-usb3-hsphy
then:
properties:
clocks:
minItems: 2
maxItems: 3
clock-names:
minItems: 2
items:
- const: link
- const: phy
- const: phy-ext
resets:
minItems: 2
maxItems: 2
reset-names:
items:
- const: link
- const: phy
required:
- compatible
- reg
- "#phy-cells"
- clocks
- clock-names
- resets
- reset-names
additionalProperties: false
examples:
- |
usb_hsphy0: phy@200 {
compatible = "socionext,uniphier-ld20-usb3-hsphy";
reg = <0x200 0x10>;
#phy-cells = <0>;
clock-names = "link", "phy";
clocks = <&sys_clk 14>, <&sys_clk 16>;
reset-names = "link", "phy";
resets = <&sys_rst 14>, <&sys_rst 16>;
vbus-supply = <&usb_vbus0>;
nvmem-cell-names = "rterm", "sel_t", "hs_i";
nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>;
};
|
