1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
# Copyright (c) 2020 MediaTek
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/mediatek,tphy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek T-PHY Controller Device Tree Bindings
maintainers:
- Chunfeng Yun <chunfeng.yun@mediatek.com>
description: |
The T-PHY controller supports physical layer functionality for a number of
controllers on MediaTek SoCs, includes USB2.0, USB3.0, PCIe and SATA.
Layout differences of banks between T-PHY V1 (mt8173/mt2701) and
T-PHY V2 (mt2712) when works on USB mode:
-----------------------------------
Version 1:
port offset bank
shared 0x0000 SPLLC
0x0100 FMREG
u2 port0 0x0800 U2PHY_COM
u3 port0 0x0900 U3PHYD
0x0a00 U3PHYD_BANK2
0x0b00 U3PHYA
0x0c00 U3PHYA_DA
u2 port1 0x1000 U2PHY_COM
u3 port1 0x1100 U3PHYD
0x1200 U3PHYD_BANK2
0x1300 U3PHYA
0x1400 U3PHYA_DA
u2 port2 0x1800 U2PHY_COM
...
Version 2:
port offset bank
u2 port0 0x0000 MISC
0x0100 FMREG
0x0300 U2PHY_COM
u3 port0 0x0700 SPLLC
0x0800 CHIP
0x0900 U3PHYD
0x0a00 U3PHYD_BANK2
0x0b00 U3PHYA
0x0c00 U3PHYA_DA
u2 port1 0x1000 MISC
0x1100 FMREG
0x1300 U2PHY_COM
u3 port1 0x1700 SPLLC
0x1800 CHIP
0x1900 U3PHYD
0x1a00 U3PHYD_BANK2
0x1b00 U3PHYA
0x1c00 U3PHYA_DA
u2 port2 0x2000 MISC
...
SPLLC shared by u3 ports and FMREG shared by u2 ports on V1 are put back
into each port; a new bank MISC for u2 ports and CHIP for u3 ports are
added on V2.
properties:
$nodename:
pattern: "^t-phy@[0-9a-f]+$"
compatible:
oneOf:
- items:
- enum:
- mediatek,mt2701-tphy
- mediatek,mt7623-tphy
- mediatek,mt7622-tphy
- mediatek,mt8516-tphy
- const: mediatek,generic-tphy-v1
- items:
- enum:
- mediatek,mt2712-tphy
- mediatek,mt7629-tphy
- mediatek,mt8183-tphy
- const: mediatek,generic-tphy-v2
- const: mediatek,mt2701-u3phy
deprecated: true
- const: mediatek,mt2712-u3phy
deprecated: true
- const: mediatek,mt8173-u3phy
reg:
description:
Register shared by multiple ports, exclude port's private register.
It is needed for T-PHY V1, such as mt2701 and mt8173, but not for
T-PHY V2, such as mt2712.
maxItems: 1
"#address-cells":
enum: [1, 2]
"#size-cells":
enum: [1, 2]
# Used with non-empty value if optional 'reg' is not provided.
# The format of the value is an arbitrary number of triplets of
# (child-bus-address, parent-bus-address, length).
ranges: true
mediatek,src-ref-clk-mhz:
description:
Frequency of reference clock for slew rate calibrate
default: 26
mediatek,src-coef:
description:
Coefficient for slew rate calibrate, depends on SoC process
$ref: /schemas/types.yaml#/definitions/uint32
default: 28
# Required child node:
patternProperties:
"^usb-phy@[0-9a-f]+$":
type: object
description:
A sub-node is required for each port the controller provides.
Address range information including the usual 'reg' property
is used inside these nodes to describe the controller's topology.
properties:
reg:
maxItems: 1
clocks:
minItems: 1
maxItems: 2
items:
- description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz)
- description: Reference clock of analog phy
description:
Uses both clocks if the clock of analog and digital phys are
separated, otherwise uses "ref" clock only if needed.
clock-names:
minItems: 1
maxItems: 2
items:
- const: ref
- const: da_ref
"#phy-cells":
const: 1
description: |
The cells contain the following arguments.
- description: The PHY type
enum:
- PHY_TYPE_USB2
- PHY_TYPE_USB3
- PHY_TYPE_PCIE
- PHY_TYPE_SATA
# The following optional vendor properties are only for debug or HQA test
mediatek,eye-src:
description:
The value of slew rate calibrate (U2 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 7
mediatek,eye-vrt:
description:
The selection of VRT reference voltage (U2 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 7
mediatek,eye-term:
description:
The selection of HS_TX TERM reference voltage (U2 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 7
mediatek,intr:
description:
The selection of internal resistor (U2 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 31
mediatek,discth:
description:
The selection of disconnect threshold (U2 phy)
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 15
mediatek,bc12:
description:
Specify the flag to enable BC1.2 if support it
type: boolean
required:
- reg
- "#phy-cells"
additionalProperties: false
required:
- compatible
- "#address-cells"
- "#size-cells"
- ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/mt8173-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/phy/phy.h>
usb@11271000 {
compatible = "mediatek,mt8173-mtu3", "mediatek,mtu3";
reg = <0x11271000 0x3000>, <0x11280700 0x0100>;
reg-names = "mac", "ippc";
phys = <&u2port0 PHY_TYPE_USB2>,
<&u3port0 PHY_TYPE_USB3>,
<&u2port1 PHY_TYPE_USB2>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
clocks = <&topckgen CLK_TOP_USB30_SEL>;
clock-names = "sys_ck";
};
t-phy@11290000 {
compatible = "mediatek,mt8173-u3phy";
reg = <0x11290000 0x800>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
u2port0: usb-phy@11290800 {
reg = <0x11290800 0x100>;
clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk48m>;
clock-names = "ref", "da_ref";
#phy-cells = <1>;
};
u3port0: usb-phy@11290900 {
reg = <0x11290900 0x700>;
clocks = <&clk26m>;
clock-names = "ref";
#phy-cells = <1>;
};
u2port1: usb-phy@11291000 {
reg = <0x11291000 0x100>;
#phy-cells = <1>;
};
};
...
|
