1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
|
Broadcom STB USB PHY
Required properties:
- compatible: should be one of
"brcm,brcmstb-usb-phy"
"brcm,bcm7216-usb-phy"
"brcm,bcm7211-usb-phy"
- reg and reg-names properties requirements are specific to the
compatible string.
"brcm,brcmstb-usb-phy":
- reg: 1 or 2 offset and length pairs. One for the base CTRL registers
and an optional pair for systems with USB 3.x support
- reg-names: not specified
"brcm,bcm7216-usb-phy":
- reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL
registers
- reg-names: "ctrl", "xhci_ec", "xhci_gbl"
"brcm,bcm7211-usb-phy":
- reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL,
USB_PHY and USB_MDIO registers and an optional pair
for the BDC registers
- reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
- #phy-cells: Shall be 1 as it expects one argument for setting
the type of the PHY. Possible values are:
- PHY_TYPE_USB2 for USB1.1/2.0 PHY
- PHY_TYPE_USB3 for USB3.x PHY
Optional Properties:
- clocks : clock phandles.
- clock-names: String, clock name.
- interrupts: wakeup interrupt
- interrupt-names: "wakeup"
- brcm,ipp: Boolean, Invert Port Power.
Possible values are: 0 (Don't invert), 1 (Invert)
- brcm,ioc: Boolean, Invert Over Current detection.
Possible values are: 0 (Don't invert), 1 (Invert)
- dr_mode: String, PHY Device mode.
Possible values are: "host", "peripheral ", "drd" or "typec-pd"
If this property is not defined, the phy will default to "host" mode.
- brcm,syscon-piarbctl: phandle to syscon for handling config registers
NOTE: one or both of the following two properties must be set
- brcm,has-xhci: Boolean indicating the phy has an XHCI phy.
- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy.
Example:
usbphy_0: usb-phy@f0470200 {
reg = <0xf0470200 0xb8>,
<0xf0471940 0x6c0>;
compatible = "brcm,brcmstb-usb-phy";
#phy-cells = <1>;
dr_mode = "host"
brcm,ioc = <1>;
brcm,ipp = <1>;
brcm,has-xhci;
brcm,has-eohci;
clocks = <&usb20>, <&usb30>;
clock-names = "sw_usb", "sw_usb3";
};
usb-phy@29f0200 {
reg = <0x29f0200 0x200>,
<0x29c0880 0x30>,
<0x29cc100 0x534>,
<0x2808000 0x24>,
<0x2980080 0x8>;
reg-names = "ctrl",
"xhci_ec",
"xhci_gbl",
"usb_phy",
"usb_mdio";
brcm,ioc = <0x0>;
brcm,ipp = <0x0>;
compatible = "brcm,bcm7211-usb-phy";
interrupts = <0x30>;
interrupt-parent = <&vpu_intr1_nosec_intc>;
interrupt-names = "wake";
#phy-cells = <0x1>;
brcm,has-xhci;
syscon-piarbctl = <&syscon_piarbctl>;
clocks = <&scmi_clk 256>;
clock-names = "sw_usb";
};
|
