1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2019 BayLibre, SAS
%YAML 1.2
---
$id: "http://devicetree.org/schemas/net/stm32-dwmac.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: STMicroelectronics STM32 / MCU DWMAC glue layer controller
maintainers:
- Alexandre Torgue <alexandre.torgue@st.com>
- Christophe Roullier <christophe.roullier@st.com>
description:
This file documents platform glue layer for stmmac.
# We need a select here so we don't match all nodes with 'snps,dwmac'
select:
properties:
compatible:
contains:
enum:
- st,stm32-dwmac
- st,stm32mp1-dwmac
required:
- compatible
allOf:
- $ref: "snps,dwmac.yaml#"
properties:
compatible:
oneOf:
- items:
- enum:
- st,stm32mp1-dwmac
- const: snps,dwmac-4.20a
- items:
- enum:
- st,stm32-dwmac
- const: snps,dwmac-4.10a
- items:
- enum:
- st,stm32-dwmac
- const: snps,dwmac-3.50a
clocks:
minItems: 3
items:
- description: GMAC main clock
- description: MAC TX clock
- description: MAC RX clock
- description: For MPU family, used for power mode
- description: For MPU family, used for PHY without quartz
- description: PTP clock
clock-names:
minItems: 3
maxItems: 6
contains:
enum:
- stmmaceth
- mac-clk-tx
- mac-clk-rx
- ethstp
- eth-ck
- ptp_ref
st,syscon:
$ref: "/schemas/types.yaml#/definitions/phandle-array"
description:
Should be phandle/offset pair. The phandle to the syscon node which
encompases the glue register, and the offset of the control register
st,eth-clk-sel:
description:
set this property in RGMII PHY when you want to select RCC clock instead of ETH_CLK125.
type: boolean
st,eth-ref-clk-sel:
description:
set this property in RMII mode when you have PHY without crystal 50MHz and want to
select RCC clock instead of ETH_REF_CLK.
type: boolean
required:
- compatible
- clocks
- clock-names
- st,syscon
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/reset/stm32mp1-resets.h>
#include <dt-bindings/mfd/stm32h7-rcc.h>
//Example 1
ethernet0: ethernet@5800a000 {
compatible = "st,stm32mp1-dwmac", "snps,dwmac-4.20a";
reg = <0x5800a000 0x2000>;
reg-names = "stmmaceth";
interrupts = <&intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clock-names = "stmmaceth",
"mac-clk-tx",
"mac-clk-rx",
"ethstp",
"eth-ck";
clocks = <&rcc ETHMAC>,
<&rcc ETHTX>,
<&rcc ETHRX>,
<&rcc ETHSTP>,
<&rcc ETHCK_K>;
st,syscon = <&syscfg 0x4>;
snps,pbl = <2>;
snps,axi-config = <&stmmac_axi_config_0>;
snps,tso;
phy-mode = "rgmii";
};
//Example 2 (MCU example)
ethernet1: ethernet@40028000 {
compatible = "st,stm32-dwmac", "snps,dwmac-3.50a";
reg = <0x40028000 0x8000>;
reg-names = "stmmaceth";
interrupts = <0 61 0>, <0 62 0>;
interrupt-names = "macirq", "eth_wake_irq";
clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>;
st,syscon = <&syscfg 0x4>;
snps,pbl = <8>;
snps,mixed-burst;
phy-mode = "mii";
};
//Example 3
ethernet2: ethernet@40027000 {
compatible = "st,stm32-dwmac", "snps,dwmac-4.10a";
reg = <0x40028000 0x8000>;
reg-names = "stmmaceth";
interrupts = <61>;
interrupt-names = "macirq";
clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx";
clocks = <&rcc 62>, <&rcc 61>, <&rcc 60>;
st,syscon = <&syscfg 0x4>;
snps,pbl = <8>;
phy-mode = "mii";
};
|
