1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
|
Broadcom BCM53xx Ethernet switches
==================================
Required properties:
- compatible: For external switch chips, compatible string must be exactly one
of: "brcm,bcm5325"
"brcm,bcm53115"
"brcm,bcm53125"
"brcm,bcm53128"
"brcm,bcm5365"
"brcm,bcm5395"
"brcm,bcm5389"
"brcm,bcm5397"
"brcm,bcm5398"
For the BCM11360 SoC, must be:
"brcm,bcm11360-srab" and the mandatory "brcm,cygnus-srab" string
For the BCM5310x SoCs with an integrated switch, must be one of:
"brcm,bcm53010-srab"
"brcm,bcm53011-srab"
"brcm,bcm53012-srab"
"brcm,bcm53018-srab"
"brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string
For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of:
"brcm,bcm11404-srab"
"brcm,bcm11407-srab"
"brcm,bcm11409-srab"
"brcm,bcm58310-srab"
"brcm,bcm58311-srab"
"brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string
For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of:
"brcm,bcm58522-srab"
"brcm,bcm58523-srab"
"brcm,bcm58525-srab"
"brcm,bcm58622-srab"
"brcm,bcm58623-srab"
"brcm,bcm58625-srab"
"brcm,bcm88312-srab" and the mandatory "brcm,nsp-srab string
For the BCM63xx/33xx SoCs with an integrated switch, must be one of:
"brcm,bcm3384-switch"
"brcm,bcm6328-switch"
"brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
Required properties for BCM585xx/586xx/88312 SoCs:
- reg: a total of 3 register base addresses, the first one must be the
Switch Register Access block base, the second is the port 5/4 mux
configuration register and the third one is the SGMII configuration
and status register base address.
- interrupts: a total of 13 interrupts must be specified, in the following
order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
then the timestamping interrupt and the sleep timer interrupts for ports
5,7,8.
Optional properties for BCM585xx/586xx/88312 SoCs:
- reg-names: a total of 3 names matching the 3 base register address, must
be in the following order:
"srab"
"mux_config"
"sgmii_config"
- interrupt-names: a total of 13 names matching the 13 interrupts specified
must be in the following order:
"link_state_p0"
"link_state_p1"
"link_state_p2"
"link_state_p3"
"link_state_p4"
"link_state_p5"
"link_state_p7"
"link_state_p8"
"phy"
"ts"
"imp_sleep_timer_p5"
"imp_sleep_timer_p7"
"imp_sleep_timer_p8"
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required and optional properties.
Examples:
Ethernet switch connected via MDIO to the host, CPU port wired to eth0:
eth0: ethernet@10001000 {
compatible = "brcm,unimac";
reg = <0x10001000 0x1000>;
fixed-link {
speed = <1000>;
duplex-full;
};
};
mdio0: mdio@10000000 {
compatible = "brcm,unimac-mdio";
#address-cells = <1>;
#size-cells = <0>;
switch0: ethernet-switch@30 {
compatible = "brcm,bcm53125";
#address-cells = <1>;
#size-cells = <0>;
ports {
port0@0 {
reg = <0>;
label = "lan1";
};
port1@1 {
reg = <1>;
label = "lan2";
};
port5@5 {
reg = <5>;
label = "cable-modem";
fixed-link {
speed = <1000>;
duplex-full;
};
phy-mode = "rgmii-txid";
};
port8@8 {
reg = <8>;
label = "cpu";
fixed-link {
speed = <1000>;
duplex-full;
};
phy-mode = "rgmii-txid";
ethernet = <ð0>;
};
};
};
};
|
