1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
|
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/mmc/mtk-sd.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MTK MSDC Storage Host Controller Binding
maintainers:
- Chaotian Jing <chaotian.jing@mediatek.com>
- Wenbin Mei <wenbin.mei@mediatek.com>
allOf:
- $ref: mmc-controller.yaml#
properties:
compatible:
oneOf:
- enum:
- mediatek,mt2701-mmc
- mediatek,mt2712-mmc
- mediatek,mt6779-mmc
- mediatek,mt7620-mmc
- mediatek,mt7622-mmc
- mediatek,mt8135-mmc
- mediatek,mt8173-mmc
- mediatek,mt8183-mmc
- mediatek,mt8516-mmc
- items:
- const: mediatek,mt7623-mmc
- const: mediatek,mt2701-mmc
- items:
- const: mediatek,mt8186-mmc
- const: mediatek,mt8183-mmc
- items:
- const: mediatek,mt8192-mmc
- const: mediatek,mt8183-mmc
- items:
- const: mediatek,mt8195-mmc
- const: mediatek,mt8183-mmc
reg:
maxItems: 1
clocks:
description:
Should contain phandle for the clock feeding the MMC controller.
minItems: 2
items:
- description: source clock (required).
- description: HCLK which used for host (required).
- description: independent source clock gate (required for MT2712).
- description: bus clock used for internal register access (required for MT2712 MSDC0/3).
- description: msdc subsys clock gate (required for MT8192).
- description: peripheral bus clock gate (required for MT8192).
- description: AXI bus clock gate (required for MT8192).
- description: AHB bus clock gate (required for MT8192).
clock-names:
minItems: 2
items:
- const: source
- const: hclk
- const: source_cg
- const: bus_clk
- const: sys_cg
- const: pclk_cg
- const: axi_cg
- const: ahb_cg
interrupts:
maxItems: 1
pinctrl-names:
items:
- const: default
- const: state_uhs
pinctrl-0:
description:
should contain default/high speed pin ctrl.
maxItems: 1
pinctrl-1:
description:
should contain uhs mode pin ctrl.
maxItems: 1
assigned-clocks:
description:
PLL of the source clock.
maxItems: 1
assigned-clock-parents:
description:
parent of source clock, used for HS400 mode to get 400Mhz source clock.
maxItems: 1
hs400-ds-delay:
$ref: /schemas/types.yaml#/definitions/uint32
description:
HS400 DS delay setting.
minimum: 0
maximum: 0xffffffff
mediatek,hs200-cmd-int-delay:
$ref: /schemas/types.yaml#/definitions/uint32
description:
HS200 command internal delay setting.
This field has total 32 stages.
The value is an integer from 0 to 31.
minimum: 0
maximum: 31
mediatek,hs400-cmd-int-delay:
$ref: /schemas/types.yaml#/definitions/uint32
description:
HS400 command internal delay setting.
This field has total 32 stages.
The value is an integer from 0 to 31.
minimum: 0
maximum: 31
mediatek,hs400-cmd-resp-sel-rising:
$ref: /schemas/types.yaml#/definitions/flag
description:
HS400 command response sample selection.
If present, HS400 command responses are sampled on rising edges.
If not present, HS400 command responses are sampled on falling edges.
mediatek,hs400-ds-dly3:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Gear of the third delay line for DS for input data latch in data
pad macro, there are 32 stages from 0 to 31.
For different corner IC, the time is different about one step, it is
about 100ps.
The value is confirmed by doing scan and calibration to find a best
value with corner IC and it is valid only for HS400 mode.
minimum: 0
maximum: 31
mediatek,latch-ck:
$ref: /schemas/types.yaml#/definitions/uint32
description:
Some SoCs do not support enhance_rx, need set correct latch-ck to avoid
data crc error caused by stop clock(fifo full) Valid range = [0:0x7].
if not present, default value is 0.
applied to compatible "mediatek,mt2701-mmc".
minimum: 0
maximum: 7
resets:
maxItems: 1
reset-names:
const: hrst
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- pinctrl-names
- pinctrl-0
- pinctrl-1
- vmmc-supply
- vqmmc-supply
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt8173-clk.h>
mmc0: mmc@11230000 {
compatible = "mediatek,mt8173-mmc";
reg = <0x11230000 0x1000>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
vmmc-supply = <&mt6397_vemc_3v3_reg>;
vqmmc-supply = <&mt6397_vio18_reg>;
clocks = <&pericfg CLK_PERI_MSDC30_0>,
<&topckgen CLK_TOP_MSDC50_0_H_SEL>;
clock-names = "source", "hclk";
pinctrl-names = "default", "state_uhs";
pinctrl-0 = <&mmc0_pins_default>;
pinctrl-1 = <&mmc0_pins_uhs>;
assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
hs400-ds-delay = <0x14015>;
mediatek,hs200-cmd-int-delay = <26>;
mediatek,hs400-cmd-int-delay = <14>;
mediatek,hs400-cmd-resp-sel-rising;
};
...
|
