blob: 26238446f2bdfe1ce251686b80705d051019d826 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/leds/leds-aw2013.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: AWINIC AW2013 3-channel LED Driver
maintainers:
- Nikita Travkin <nikitos.tr@gmail.com>
description: |
The AW2013 is a 3-channel LED driver with I2C interface. It can control
LED brightness with PWM output.
properties:
compatible:
const: awinic,aw2013
reg:
maxItems: 1
interrupts:
maxItems: 1
description: Open-drain, low active interrupt pin "INTN".
Used to report completion of operations (power up, LED breath effects).
vcc-supply:
description: Regulator providing power to the "VCC" pin.
vio-supply:
description: Regulator providing power for pull-up of the I/O lines.
"VIO1" in the typical application circuit example of the datasheet.
Note that this regulator does not directly connect to AW2013, but is
needed for the correct operation of the interrupt and I2C lines.
"#address-cells":
const: 1
"#size-cells":
const: 0
patternProperties:
"^led@[0-2]$":
type: object
$ref: common.yaml#
unevaluatedProperties: false
properties:
reg:
description: Index of the LED.
minimum: 0
maximum: 2
required:
- compatible
- reg
- "#address-cells"
- "#size-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
led-controller@45 {
compatible = "awinic,aw2013";
reg = <0x45>;
interrupts = <42 IRQ_TYPE_LEVEL_LOW>;
#address-cells = <1>;
#size-cells = <0>;
vcc-supply = <&pm8916_l17>;
led@0 {
reg = <0>;
led-max-microamp = <5000>;
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_RED>;
};
led@1 {
reg = <1>;
led-max-microamp = <5000>;
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
};
led@2 {
reg = <2>;
led-max-microamp = <5000>;
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_BLUE>;
};
};
};
...
|
