1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iommu/mediatek,iommu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek IOMMU Architecture Implementation
maintainers:
- Yong Wu <yong.wu@mediatek.com>
description: |+
Some MediaTek SOCs contain a Multimedia Memory Management Unit (M4U), and
this M4U have two generations of HW architecture. Generation one uses flat
pagetable, and only supports 4K size page mapping. Generation two uses the
ARM Short-Descriptor translation table format for address translation.
About the M4U Hardware Block Diagram, please check below:
EMI (External Memory Interface)
|
m4u (Multimedia Memory Management Unit)
|
+--------+
| |
gals0-rx gals1-rx (Global Async Local Sync rx)
| |
| |
gals0-tx gals1-tx (Global Async Local Sync tx)
| | Some SoCs may have GALS.
+--------+
|
SMI Common(Smart Multimedia Interface Common)
|
+----------------+-------
| |
| gals-rx There may be GALS in some larbs.
| |
| |
| gals-tx
| |
SMI larb0 SMI larb1 ... SoCs have several SMI local arbiter(larb).
(display) (vdec)
| |
| |
+-----+-----+ +----+----+
| | | | | |
| | |... | | | ... There are different ports in each larb.
| | | | | |
OVL0 RDMA0 WDMA0 MC PP VLD
As above, The Multimedia HW will go through SMI and M4U while it
access EMI. SMI is a bridge between m4u and the Multimedia HW. It contain
smi local arbiter and smi common. It will control whether the Multimedia
HW should go though the m4u for translation or bypass it and talk
directly with EMI. And also SMI help control the power domain and clocks for
each local arbiter.
Normally we specify a local arbiter(larb) for each multimedia HW
like display, video decode, and camera. And there are different ports
in each larb. Take a example, There are many ports like MC, PP, VLD in the
video decode local arbiter, all these ports are according to the video HW.
In some SoCs, there may be a GALS(Global Async Local Sync) module between
smi-common and m4u, and additional GALS module between smi-larb and
smi-common. GALS can been seen as a "asynchronous fifo" which could help
synchronize for the modules in different clock frequency.
properties:
compatible:
oneOf:
- enum:
- mediatek,mt2701-m4u # generation one
- mediatek,mt2712-m4u # generation two
- mediatek,mt6779-m4u # generation two
- mediatek,mt8167-m4u # generation two
- mediatek,mt8173-m4u # generation two
- mediatek,mt8183-m4u # generation two
- description: mt7623 generation one
items:
- const: mediatek,mt7623-m4u
- const: mediatek,mt2701-m4u
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
items:
- description: bclk is the block clock.
clock-names:
items:
- const: bclk
mediatek,larbs:
$ref: /schemas/types.yaml#/definitions/phandle-array
minItems: 1
maxItems: 16
description: |
List of phandle to the local arbiters in the current Socs.
Refer to bindings/memory-controllers/mediatek,smi-larb.yaml. It must sort
according to the local arbiter index, like larb0, larb1, larb2...
'#iommu-cells':
const: 1
description: |
This is the mtk_m4u_id according to the HW. Specifies the mtk_m4u_id as
defined in
dt-binding/memory/mt2701-larb-port.h for mt2701 and mt7623,
dt-binding/memory/mt2712-larb-port.h for mt2712,
dt-binding/memory/mt6779-larb-port.h for mt6779,
dt-binding/memory/mt8167-larb-port.h for mt8167,
dt-binding/memory/mt8173-larb-port.h for mt8173,
dt-binding/memory/mt8183-larb-port.h for mt8183.
required:
- compatible
- reg
- interrupts
- mediatek,larbs
- '#iommu-cells'
allOf:
- if:
properties:
compatible:
contains:
enum:
- mediatek,mt2701-m4u
- mediatek,mt2712-m4u
- mediatek,mt8173-m4u
then:
required:
- clocks
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/mt8173-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
iommu: iommu@10205000 {
compatible = "mediatek,mt8173-m4u";
reg = <0x10205000 0x1000>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_LOW>;
clocks = <&infracfg CLK_INFRA_M4U>;
clock-names = "bclk";
mediatek,larbs = <&larb0 &larb1 &larb2
&larb3 &larb4 &larb5>;
#iommu-cells = <1>;
};
- |
#include <dt-bindings/memory/mt8173-larb-port.h>
/* Example for a client device */
display {
compatible = "mediatek,mt8173-disp";
iommus = <&iommu M4U_PORT_DISP_OVL0>,
<&iommu M4U_PORT_DISP_RDMA0>;
};
|
