1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
|
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ARM Generic Interrupt Controller, version 3
maintainers:
- Marc Zyngier <marc.zyngier@arm.com>
description: |
AArch64 SMP cores are often associated with a GICv3, providing Private
Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
Software Generated Interrupts (SGI), and Locality-specific Peripheral
Interrupts (LPI).
allOf:
- $ref: /schemas/interrupt-controller.yaml#
properties:
compatible:
oneOf:
- items:
- enum:
- qcom,msm8996-gic-v3
- const: arm,gic-v3
- const: arm,gic-v3
interrupt-controller: true
"#address-cells":
enum: [ 0, 1, 2 ]
"#size-cells":
enum: [ 1, 2 ]
ranges: true
"#interrupt-cells":
description: |
Specifies the number of cells needed to encode an interrupt source.
Must be a single cell with a value of at least 3.
If the system requires describing PPI affinity, then the value must
be at least 4.
The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
interrupts, 2 for interrupts in the Extended SPI range, 3 for the
Extended PPI range. Other values are reserved for future use.
The 2nd cell contains the interrupt number for the interrupt type.
SPI interrupts are in the range [0-987]. PPI interrupts are in the
range [0-15]. Extented SPI interrupts are in the range [0-1023].
Extended PPI interrupts are in the range [0-127].
The 3rd cell is the flags, encoded as follows:
bits[3:0] trigger type and level flags.
1 = edge triggered
4 = level triggered
The 4th cell is a phandle to a node describing a set of CPUs this
interrupt is affine to. The interrupt must be a PPI, and the node
pointed must be a subnode of the "ppi-partitions" subnode. For
interrupt types other than PPI or PPIs that are not partitionned,
this cell must be zero. See the "ppi-partitions" node description
below.
Cells 5 and beyond are reserved for future use and must have a value
of 0 if present.
enum: [ 3, 4 ]
reg:
description: |
Specifies base physical address(s) and size of the GIC
registers, in the following order:
- GIC Distributor interface (GICD)
- GIC Redistributors (GICR), one range per redistributor region
- GIC CPU interface (GICC)
- GIC Hypervisor interface (GICH)
- GIC Virtual CPU interface (GICV)
GICC, GICH and GICV are optional.
minItems: 2
maxItems: 4096 # Should be enough?
interrupts:
description:
Interrupt source of the VGIC maintenance interrupt.
maxItems: 1
redistributor-stride:
description:
If using padding pages, specifies the stride of consecutive
redistributors. Must be a multiple of 64kB.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint64
- multipleOf: 0x10000
exclusiveMinimum: 0
"#redistributor-regions":
description:
The number of independent contiguous regions occupied by the
redistributors. Required if more than one such region is present.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32
- maximum: 4096 # Should be enough?
msi-controller:
description:
Only present if the Message Based Interrupt functionnality is
being exposed by the HW, and the mbi-ranges property present.
mbi-ranges:
description:
A list of pairs <intid span>, where "intid" is the first SPI of a range
that can be used an MBI, and "span" the size of that range. Multiple
ranges can be provided.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-matrix
- items:
minItems: 2
maxItems: 2
mbi-alias:
description:
Address property. Base address of an alias of the GICD region containing
only the {SET,CLR}SPI registers to be used if isolation is required,
and if supported by the HW.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- items:
minItems: 1
maxItems: 2
ppi-partitions:
type: object
description:
PPI affinity can be expressed as a single "ppi-partitions" node,
containing a set of sub-nodes.
patternProperties:
"^interrupt-partition-[0-9]+$":
type: object
properties:
affinity:
$ref: /schemas/types.yaml#/definitions/phandle-array
description:
Should be a list of phandles to CPU nodes (as described in
Documentation/devicetree/bindings/arm/cpus.yaml).
required:
- affinity
dependencies:
mbi-ranges: [ msi-controller ]
msi-controller: [ mbi-ranges ]
required:
- compatible
- interrupts
- reg
patternProperties:
"^gic-its@": false
"^interrupt-controller@[0-9a-f]+$": false
# msi-controller is preferred, but allow other names
"^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$":
type: object
description:
GICv3 has one or more Interrupt Translation Services (ITS) that are
used to route Message Signalled Interrupts (MSI) to the CPUs.
properties:
compatible:
const: arm,gic-v3-its
msi-controller: true
"#msi-cells":
description:
The single msi-cell is the DeviceID of the device which will generate
the MSI.
const: 1
reg:
description:
Specifies the base physical address and size of the ITS registers.
maxItems: 1
socionext,synquacer-pre-its:
description:
(u32, u32) tuple describing the untranslated
address and size of the pre-ITS window.
allOf:
- $ref: /schemas/types.yaml#/definitions/uint32-array
- items:
minItems: 2
maxItems: 2
required:
- compatible
- msi-controller
- "#msi-cells"
- reg
additionalProperties: false
additionalProperties: false
examples:
- |
gic: interrupt-controller@2cf00000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-controller;
reg = <0x2f000000 0x10000>, // GICD
<0x2f100000 0x200000>, // GICR
<0x2c000000 0x2000>, // GICC
<0x2c010000 0x2000>, // GICH
<0x2c020000 0x2000>; // GICV
interrupts = <1 9 4>;
msi-controller;
mbi-ranges = <256 128>;
msi-controller@2c200000 {
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
reg = <0x2c200000 0x20000>;
};
};
interrupt-controller@2c010000 {
compatible = "arm,gic-v3";
#interrupt-cells = <4>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-controller;
redistributor-stride = <0x0 0x40000>; // 256kB stride
#redistributor-regions = <2>;
reg = <0x2c010000 0x10000>, // GICD
<0x2d000000 0x800000>, // GICR 1: CPUs 0-31
<0x2e000000 0x800000>, // GICR 2: CPUs 32-63
<0x2c040000 0x2000>, // GICC
<0x2c060000 0x2000>, // GICH
<0x2c080000 0x2000>; // GICV
interrupts = <1 9 4>;
msi-controller@2c200000 {
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
reg = <0x2c200000 0x20000>;
};
msi-controller@2c400000 {
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
reg = <0x2c400000 0x20000>;
};
ppi-partitions {
part0: interrupt-partition-0 {
affinity = <&cpu0 &cpu2>;
};
part1: interrupt-partition-1 {
affinity = <&cpu1 &cpu3>;
};
};
};
device@0 {
reg = <0 4>;
interrupts = <1 1 4 &part0>;
};
...
|
