1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/ti,ads131e08.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs
maintainers:
- Tomislav Denis <tomislav.denis@avl.com>
description: |
The ADS131E0x are a family of multichannel, simultaneous sampling,
24-bit, delta-sigma, analog-to-digital converters (ADCs) with a
built-in programmable gain amplifier (PGA), internal reference
and an onboard oscillator.
The communication with ADC chip is via the SPI bus (mode 1).
https://www.ti.com/lit/ds/symlink/ads131e08.pdf
properties:
compatible:
enum:
- ti,ads131e04
- ti,ads131e06
- ti,ads131e08
reg:
maxItems: 1
spi-max-frequency: true
spi-cpha: true
clocks:
description: |
Device tree identifier to the clock source (2.048 MHz).
Note: clock source is selected using CLKSEL pin.
maxItems: 1
clock-names:
items:
- const: adc-clk
interrupts:
description: |
IRQ line for the ADC data ready.
maxItems: 1
vref-supply:
description: |
Optional external voltage reference. If not supplied, internal voltage
reference is used.
ti,vref-internal:
description: |
Select the internal voltage reference value.
0: 2.4V
1: 4.0V
If this field is left empty, 2.4V is selected.
Note: internal voltage reference is used only if vref-supply is not supplied.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
default: 0
'#address-cells':
const: 1
'#size-cells':
const: 0
required:
- compatible
- reg
- spi-cpha
- clocks
- clock-names
- interrupts
patternProperties:
"^channel@([0-7])$":
$ref: "adc.yaml"
type: object
description: |
Represents the external channels which are connected to the ADC.
properties:
reg:
description: |
The channel number.
Up to 4 channels, numbered from 0 to 3 for ti,ads131e04.
Up to 6 channels, numbered from 0 to 5 for ti,ads131e06.
Up to 8 channels, numbered from 0 to 7 for ti,ads131e08.
items:
minimum: 0
maximum: 7
ti,gain:
description: |
The PGA gain value for the channel.
If this field is left empty, PGA gain 1 is used.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [1, 2, 4, 8, 12]
default: 1
ti,mux:
description: |
Channel input selection(muliplexer).
0: Normal input.
1: Input shorted to (VREFP + VREFN) / 2 (for offset or noise measurements).
3: MVDD (for supply measurement)
4: Temperature sensor
If this field is left empty, normal input is selected.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 3, 4]
default: 0
required:
- reg
additionalProperties: false
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "ti,ads131e08";
reg = <0>;
spi-max-frequency = <1000000>;
spi-cpha;
clocks = <&clk2048k>;
clock-names = "adc-clk";
interrupt-parent = <&gpio5>;
interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
vref-supply = <&adc_vref>;
#address-cells = <1>;
#size-cells = <0>;
channel@0 {
reg = <0>;
};
channel@1 {
reg = <1>;
};
channel@2 {
reg = <2>;
ti,gain = <2>;
};
channel@3 {
reg = <3>;
};
channel@4 {
reg = <4>;
};
channel@5 {
reg = <5>;
};
channel@6 {
reg = <6>;
};
channel@7 {
reg = <7>;
ti,mux = <4>;
};
};
};
|
