1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
|
device-tree bindings for rockchip soc display controller (vop)
VOP (Visual Output Processor) is the Display Controller for the Rockchip
series of SoCs which transfers the image data from a video memory
buffer to an external LCD interface.
Required properties:
- compatible: value should be one of the following
"rockchip,rk3036-vop";
"rockchip,rk3126-vop";
"rockchip,px30-vop-lit";
"rockchip,px30-vop-big";
"rockchip,rk3066-vop";
"rockchip,rk3188-vop";
"rockchip,rk3288-vop";
"rockchip,rk3368-vop";
"rockchip,rk3366-vop";
"rockchip,rk3399-vop-big";
"rockchip,rk3399-vop-lit";
"rockchip,rk3228-vop";
"rockchip,rk3328-vop";
- reg: Must contain one entry corresponding to the base address and length
of the register space. Can optionally contain a second entry
corresponding to the CRTC gamma LUT address.
- interrupts: should contain a list of all VOP IP block interrupts in the
order: VSYNC, LCD_SYSTEM. The interrupt specifier
format depends on the interrupt controller used.
- clocks: must include clock specifiers corresponding to entries in the
clock-names property.
- clock-names: Must contain
aclk_vop: for ddr buffer transfer.
hclk_vop: for ahb bus to R/W the phy regs.
dclk_vop: pixel clock.
- resets: Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- axi
- ahb
- dclk
- iommus: required a iommu node
- port: A port node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
Example:
SoC specific DT entry:
vopb: vopb@ff930000 {
compatible = "rockchip,rk3288-vop";
reg = <0x0 0xff930000 0x0 0x19c>, <0x0 0xff931000 0x0 0x1000>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
reset-names = "axi", "ahb", "dclk";
iommus = <&vopb_mmu>;
vopb_out: port {
#address-cells = <1>;
#size-cells = <0>;
vopb_out_edp: endpoint@0 {
reg = <0>;
remote-endpoint=<&edp_in_vopb>;
};
vopb_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint=<&hdmi_in_vopb>;
};
};
};
|
