1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
|
Rockchip RK3288 LVDS interface
================================
Required properties:
- compatible: matching the soc type, one of
- "rockchip,rk3288-lvds";
- reg: physical base address of the controller and length
of memory mapped region.
- clocks: must include clock specifiers corresponding to entries in the
clock-names property.
- clock-names: must contain "pclk_lvds"
- avdd1v0-supply: regulator phandle for 1.0V analog power
- avdd1v8-supply: regulator phandle for 1.8V analog power
- avdd3v3-supply: regulator phandle for 3.3V analog power
- rockchip,grf: phandle to the general register files syscon
- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface
Optional properties:
- pinctrl-names: must contain a "lcdc" entry.
- pinctrl-0: pin control group to be used for this controller.
Required nodes:
The lvds has two video ports as described by
Documentation/devicetree/bindings/media/video-interfaces.txt
Their connections are modeled using the OF graph bindings specified in
Documentation/devicetree/bindings/graph.txt.
- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
- video port 1 for either a panel or subsequent encoder
the lvds panel described by
Documentation/devicetree/bindings/display/panel/simple-panel.txt
Panel required properties:
- ports for remote LVDS output
Panel optional properties:
- data-mapping: should be "vesa-24","jeida-24" or "jeida-18".
This describes decribed by:
Documentation/devicetree/bindings/display/panel/panel-lvds.txt
Example:
lvds_panel: lvds-panel {
compatible = "auo,b101ean01";
enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
data-mapping = "jeida-24";
ports {
panel_in_lvds: endpoint {
remote-endpoint = <&lvds_out_panel>;
};
};
};
For Rockchip RK3288:
lvds: lvds@ff96c000 {
compatible = "rockchip,rk3288-lvds";
rockchip,grf = <&grf>;
reg = <0xff96c000 0x4000>;
clocks = <&cru PCLK_LVDS_PHY>;
clock-names = "pclk_lvds";
pinctrl-names = "lcdc";
pinctrl-0 = <&lcdc_ctl>;
avdd1v0-supply = <&vdd10_lcd>;
avdd1v8-supply = <&vcc18_lcd>;
avdd3v3-supply = <&vcca_33>;
rockchip,output = "rgb";
ports {
#address-cells = <1>;
#size-cells = <0>;
lvds_in: port@0 {
reg = <0>;
lvds_in_vopb: endpoint@0 {
reg = <0>;
remote-endpoint = <&vopb_out_lvds>;
};
lvds_in_vopl: endpoint@1 {
reg = <1>;
remote-endpoint = <&vopl_out_lvds>;
};
};
lvds_out: port@1 {
reg = <1>;
lvds_out_panel: endpoint {
remote-endpoint = <&panel_in_lvds>;
};
};
};
};
|
