1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
|
LVDS Display Panel
==================
LVDS is a physical layer specification defined in ANSI/TIA/EIA-644-A. Multiple
incompatible data link layers have been used over time to transmit image data
to LVDS panels. This bindings supports display panels compatible with the
following specifications.
[JEIDA] "Digital Interface Standards for Monitor", JEIDA-59-1999, February
1999 (Version 1.0), Japan Electronic Industry Development Association (JEIDA)
[LDI] "Open LVDS Display Interface", May 1999 (Version 0.95), National
Semiconductor
[VESA] "VESA Notebook Panel Standard", October 2007 (Version 1.0), Video
Electronics Standards Association (VESA)
Device compatible with those specifications have been marketed under the
FPD-Link and FlatLink brands.
Required properties:
- compatible: Shall contain "panel-lvds" in addition to a mandatory
panel-specific compatible string defined in individual panel bindings. The
"panel-lvds" value shall never be used on its own.
- width-mm: See panel-common.txt.
- height-mm: See panel-common.txt.
- data-mapping: The color signals mapping order, "jeida-18", "jeida-24"
or "vesa-24".
Optional properties:
- label: See panel-common.txt.
- gpios: See panel-common.txt.
- backlight: See panel-common.txt.
- power-supply: See panel-common.txt.
- data-mirror: If set, reverse the bit order described in the data mappings
below on all data lanes, transmitting bits for slots 6 to 0 instead of
0 to 6.
Required nodes:
- panel-timing: See panel-common.txt.
- ports: See panel-common.txt. These bindings require a single port subnode
corresponding to the panel LVDS input.
LVDS data mappings are defined as follows.
- "jeida-18" - 18-bit data mapping compatible with the [JEIDA], [LDI] and
[VESA] specifications. Data are transferred as follows on 3 LVDS lanes.
Slot 0 1 2 3 4 5 6
________________ _________________
Clock \_______________________/
______ ______ ______ ______ ______ ______ ______
DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
- "jeida-24" - 24-bit data mapping compatible with the [DSIM] and [LDI]
specifications. Data are transferred as follows on 4 LVDS lanes.
Slot 0 1 2 3 4 5 6
________________ _________________
Clock \_______________________/
______ ______ ______ ______ ______ ______ ______
DATA0 ><__G2__><__R7__><__R6__><__R5__><__R4__><__R3__><__R2__><
DATA1 ><__B3__><__B2__><__G7__><__G6__><__G5__><__G4__><__G3__><
DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B7__><__B6__><__B5__><__B4__><
DATA3 ><_CTL3_><__B1__><__B0__><__G1__><__G0__><__R1__><__R0__><
- "vesa-24" - 24-bit data mapping compatible with the [VESA] specification.
Data are transferred as follows on 4 LVDS lanes.
Slot 0 1 2 3 4 5 6
________________ _________________
Clock \_______________________/
______ ______ ______ ______ ______ ______ ______
DATA0 ><__G0__><__R5__><__R4__><__R3__><__R2__><__R1__><__R0__><
DATA1 ><__B1__><__B0__><__G5__><__G4__><__G3__><__G2__><__G1__><
DATA2 ><_CTL2_><_CTL1_><_CTL0_><__B5__><__B4__><__B3__><__B2__><
DATA3 ><_CTL3_><__B7__><__B6__><__G7__><__G6__><__R7__><__R6__><
Control signals are mapped as follows.
CTL0: HSync
CTL1: VSync
CTL2: Data Enable
CTL3: 0
Example
-------
panel {
compatible = "mitsubishi,aa121td01", "panel-lvds";
width-mm = <261>;
height-mm = <163>;
data-mapping = "jeida-24";
panel-timing {
/* 1280x800 @60Hz */
clock-frequency = <71000000>;
hactive = <1280>;
vactive = <800>;
hsync-len = <70>;
hfront-porch = <20>;
hback-porch = <70>;
vsync-len = <5>;
vfront-porch = <3>;
vback-porch = <15>;
};
port {
panel_in: endpoint {
remote-endpoint = <&lvds_encoder>;
};
};
};
|
