1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/clock/idt,versaclock5.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Binding for IDT VersaClock 5 and 6 programmable I2C clock generators
description: |
The IDT VersaClock 5 and VersaClock 6 are programmable I2C
clock generators providing from 3 to 12 output clocks.
When referencing the provided clock in the DT using phandle and clock
specifier, the following mapping applies:
- 5P49V5923:
0 -- OUT0_SEL_I2CB
1 -- OUT1
2 -- OUT2
- 5P49V5933:
0 -- OUT0_SEL_I2CB
1 -- OUT1
2 -- OUT4
- other parts:
0 -- OUT0_SEL_I2CB
1 -- OUT1
2 -- OUT2
3 -- OUT3
4 -- OUT4
maintainers:
- Luca Ceresoli <luca@lucaceresoli.net>
properties:
compatible:
enum:
- idt,5p49v5923
- idt,5p49v5925
- idt,5p49v5933
- idt,5p49v5935
- idt,5p49v6901
- idt,5p49v6965
reg:
description: I2C device address
enum: [ 0x68, 0x6a ]
'#clock-cells':
const: 1
patternProperties:
"^OUT[1-4]$":
type: object
description:
Description of one of the outputs (OUT1..OUT4). See "Clock1 Output
Configuration" in the Versaclock 5/6/6E Family Register Description
and Programming Guide.
properties:
idt,mode:
description:
The output drive mode. Values defined in dt-bindings/clk/versaclock.h
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 6
idt,voltage-microvolt:
description: The output drive voltage.
enum: [ 1800000, 2500000, 3300000 ]
idt,slew-percent:
description: The Slew rate control for CMOS single-ended.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [ 80, 85, 90, 100 ]
required:
- compatible
- reg
- '#clock-cells'
allOf:
- if:
properties:
compatible:
enum:
- idt,5p49v5933
- idt,5p49v5935
then:
# Devices with builtin crystal + optional external input
properties:
clock-names:
const: clkin
clocks:
maxItems: 1
else:
# Devices without builtin crystal
properties:
clock-names:
minItems: 1
maxItems: 2
items:
enum: [ xin, clkin ]
clocks:
minItems: 1
maxItems: 2
required:
- clock-names
- clocks
examples:
- |
#include <dt-bindings/clk/versaclock.h>
/* 25MHz reference crystal */
ref25: ref25m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
i2c@0 {
reg = <0x0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
/* IDT 5P49V5923 I2C clock generator */
vc5: clock-generator@6a {
compatible = "idt,5p49v5923";
reg = <0x6a>;
#clock-cells = <1>;
/* Connect XIN input to 25MHz reference */
clocks = <&ref25m>;
clock-names = "xin";
OUT1 {
idt,drive-mode = <VC5_CMOSD>;
idt,voltage-microvolts = <1800000>;
idt,slew-percent = <80>;
};
OUT4 {
idt,drive-mode = <VC5_LVDS>;
};
};
};
/* Consumer referencing the 5P49V5923 pin OUT1 */
consumer {
/* ... */
clocks = <&vc5 1>;
/* ... */
};
...
|
