#!/bin/bash
# SPDX-License-Identifier: GPL-2.0

ALL_TESTS="
	same_speeds_autoneg_off
	different_speeds_autoneg_off
	combination_of_neg_on_and_off
	advertise_subset_of_speeds
	check_highest_speed_is_chosen
	different_speeds_autoneg_on
"
NUM_NETIFS=2
source lib.sh
source ethtool_lib.sh

h1_create()
{
	simple_if_init $h1 192.0.2.1/24
}

h1_destroy()
{
	simple_if_fini $h1 192.0.2.1/24
}

h2_create()
{
	simple_if_init $h2 192.0.2.2/24
}

h2_destroy()
{
	simple_if_fini $h2 192.0.2.2/24
}

setup_prepare()
{
	h1=${NETIFS[p1]}
	h2=${NETIFS[p2]}

	h1_create
	h2_create
}

cleanup()
{
	pre_cleanup

	h2_destroy
	h1_destroy
}

same_speeds_autoneg_off()
{
	# Check that when each of the reported speeds is forced, the links come
	# up and are operational.
	local -a speeds_arr=($(common_speeds_get $h1 $h2 0 0))

	for speed in "${speeds_arr[@]}"; do
		RET=0
		ethtool_set $h1 speed $speed autoneg off
		ethtool_set $h2 speed $speed autoneg off

		setup_wait_dev_with_timeout $h1
		setup_wait_dev_with_timeout $h2
		ping_do $h1 192.0.2.2
		check_err $? "speed $speed autoneg off"
		log_test "force of same speed autoneg off"
		log_info "speed = $speed"
	done

	ethtool -s $h2 autoneg on
	ethtool -s $h1 autoneg on
}

different_speeds_autoneg_off()
{
	# Test that when we force different speeds, links are not up and ping
	# fails.
	RET=0

	local -a speeds_arr=($(different_speeds_get $h1 $h2 0 0))
	local speed1=${speeds_arr[0]}
	local speed2=${speeds_arr[1]}

	ethtool_set $h1 speed $speed1 autoneg off
	ethtool_set $h2 speed $speed2 autoneg off

	setup_wait_dev_with_timeout $h1
	setup_wait_dev_with_timeout $h2
	ping_do $h1 192.0.2.2
	check_fail $? "ping with different speeds"

	log_test "force of different speeds autoneg off"

	ethtool -s $h2 autoneg on
	ethtool -s $h1 autoneg on
}

combination_of_neg_on_and_off()
{
	# Test that when one device is forced to a speed supported by both
	# endpoints and the other device is configured to autoneg on, the links
	# are up and ping passes.
	local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1))

	for speed in "${speeds_arr[@]}"; do
		RET=0
		ethtool_set $h1 speed $speed autoneg off

		setup_wait_dev_with_timeout $h1
		setup_wait_dev_with_timeout $h2
		ping_do $h1 192.0.2.2
		check_err $? "h1-speed=$speed autoneg off, h2 autoneg on"
		log_test "one side with autoneg off and another with autoneg on"
		log_info "force speed = $speed"
	done

	ethtool -s $h1 autoneg on
}

hex_speed_value_get()
{
	local speed=$1; shift

	local shift_size=${speed_values[$speed]}
	speed=$((0x1 << $"shift_size"))
	printf "%#x" "$speed"
}

subset_of_common_speeds_get()
{
	local dev1=$1; shift
	local dev2=$1; shift
	local adver=$1; shift

	local -a speeds_arr=($(common_speeds_get $dev1 $dev2 0 $adver))
	local speed_to_advertise=0
	local speed_to_remove=${speeds_arr[0]}
	speed_to_remove+='base'

	local -a speeds_mode_arr=($(common_speeds_get $dev1 $dev2 1 $adver))

	for speed in ${speeds_mode_arr[@]}; do
		if [[ $speed != $speed_to_remove* ]]; then
			speed=$(hex_speed_value_get $speed)
			speed_to_advertise=$(($speed_to_advertise | \
						$speed))
		fi

	done

	# Convert to hex.
	printf "%#x" "$speed_to_advertise"
}

speed_to_advertise_get()
{
	# The function returns the hex number that is composed by OR-ing all
	# the modes corresponding to the provided speed.
	local speed_without_mode=$1; shift
	local supported_speeds=("$@"); shift
	local speed_to_advertise=0

	speed_without_mode+='base'

	for speed in ${supported_speeds[@]}; do
		if [[ $speed == $speed_without_mode* ]]; then
			speed=$(hex_speed_value_get $speed)
			speed_to_advertise=$(($speed_to_advertise | \
						$speed))
		fi

	done

	# Convert to hex.
	printf "%#x" "$speed_to_advertise"
}

advertise_subset_of_speeds()
{
	# Test that when one device advertises a subset of speeds and another
	# advertises a specific speed (but all modes of this speed), the links
	# are up and ping passes.
	RET=0

	local speed_1_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1)
	ethtool_set $h1 advertise $speed_1_to_advertise

	if [ $RET != 0 ]; then
		log_test "advertise subset of speeds"
		return
	fi

	local -a speeds_arr_without_mode=($(common_speeds_get $h1 $h2 0 1))
	# Check only speeds that h1 advertised. Remove the first speed.
	unset speeds_arr_without_mode[0]
	local -a speeds_arr_with_mode=($(common_speeds_get $h1 $h2 1 1))

	for speed_value in ${speeds_arr_without_mode[@]}; do
		RET=0
		local speed_2_to_advertise=$(speed_to_advertise_get $speed_value \
			"${speeds_arr_with_mode[@]}")
		ethtool_set $h2 advertise $speed_2_to_advertise

		setup_wait_dev_with_timeout $h1
		setup_wait_dev_with_timeout $h2
		ping_do $h1 192.0.2.2
		check_err $? "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise ($speed_value)"

		log_test "advertise subset of speeds"
		log_info "h1=$speed_1_to_advertise, h2=$speed_2_to_advertise"
	done

	ethtool -s $h2 autoneg on
	ethtool -s $h1 autoneg on
}

check_highest_speed_is_chosen()
{
	# Test that when one device advertises a subset of speeds, the other
	# chooses the highest speed. This test checks configuration without
	# traffic.
	RET=0

	local max_speed
	local chosen_speed
	local speed_to_advertise=$(subset_of_common_speeds_get $h1 $h2 1)

	ethtool_set $h1 advertise $speed_to_advertise

	if [ $RET != 0 ]; then
		log_test "check highest speed"
		return
	fi

	local -a speeds_arr=($(common_speeds_get $h1 $h2 0 1))

	max_speed=${speeds_arr[0]}
	for current in ${speeds_arr[@]}; do
		if [[ $current -gt $max_speed ]]; then
			max_speed=$current
		fi
	done

	setup_wait_dev_with_timeout $h1
	setup_wait_dev_with_timeout $h2
	chosen_speed=$(ethtool $h1 | grep 'Speed:')
	chosen_speed=${chosen_speed%"Mb/s"*}
	chosen_speed=${chosen_speed#*"Speed: "}
	((chosen_speed == max_speed))
	check_err $? "h1 advertise $speed_to_advertise, h2 sync to speed $chosen_speed"

	log_test "check highest speed"

	ethtool -s $h2 autoneg on
	ethtool -s $h1 autoneg on
}

different_speeds_autoneg_on()
{
	# Test that when we configure links to advertise different speeds,
	# links are not up and ping fails.
	RET=0

	local -a speeds=($(different_speeds_get $h1 $h2 1 1))
	local speed1=${speeds[0]}
	local speed2=${speeds[1]}

	speed1=$(hex_speed_value_get $speed1)
	speed2=$(hex_speed_value_get $speed2)

	ethtool_set $h1 advertise $speed1
	ethtool_set $h2 advertise $speed2

	if (($RET)); then
		setup_wait_dev_with_timeout $h1
		setup_wait_dev_with_timeout $h2
		ping_do $h1 192.0.2.2
		check_fail $? "ping with different speeds autoneg on"
	fi

	log_test "advertise different speeds autoneg on"

	ethtool -s $h2 autoneg on
	ethtool -s $h1 autoneg on
}

trap cleanup EXIT

setup_prepare
setup_wait

declare -gA speed_values
eval "speed_values=($(speeds_arr_get))"

tests_run

exit $EXIT_STATUS