/* * net/tipc/socket.c: TIPC socket API * * Copyright (c) 2001-2007, 2012 Ericsson AB * Copyright (c) 2004-2008, 2010-2013, Wind River Systems * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the names of the copyright holders nor the names of its * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include "core.h" #include "port.h" #include #include #define SS_LISTENING -1 /* socket is listening */ #define SS_READY -2 /* socket is connectionless */ #define CONN_TIMEOUT_DEFAULT 8000 /* default connect timeout = 8s */ struct tipc_sock { struct sock sk; struct tipc_port *p; struct tipc_portid peer_name; unsigned int conn_timeout; }; #define tipc_sk(sk) ((struct tipc_sock *)(sk)) #define tipc_sk_port(sk) (tipc_sk(sk)->p) #define tipc_rx_ready(sock) (!skb_queue_empty(&sock->sk->sk_receive_queue) || \ (sock->state == SS_DISCONNECTING)) static int backlog_rcv(struct sock *sk, struct sk_buff *skb); static u32 dispatch(struct tipc_port *tport, struct sk_buff *buf); static void wakeupdispatch(struct tipc_port *tport); static void tipc_data_ready(struct sock *sk, int len); static void tipc_write_space(struct sock *sk); static int release(struct socket *sock); static int accept(struct socket *sock, struct socket *new_sock, int flags); static const struct proto_ops packet_ops; static const struct proto_ops stream_ops; static const struct proto_ops msg_ops; static struct proto tipc_proto; static struct proto tipc_proto_kern; static int sockets_enabled; /* * Revised TIPC socket locking policy: * * Most socket operations take the standard socket lock when they start * and hold it until they finish (or until they need to sleep). Acquiring * this lock grants the owner exclusive access to the fields of the socket * data structures, with the exception of the backlog queue. A few socket * operations can be done without taking the socket lock because they only * read socket information that never changes during the life of the socket. * * Socket operations may acquire the lock for the associated TIPC port if they * need to perform an operation on the port. If any routine needs to acquire * both the socket lock and the port lock it must take the socket lock first * to avoid the risk of deadlock. * * The dispatcher handling incoming messages cannot grab the socket lock in * the standard fashion, since invoked it runs at the BH level and cannot block. * Instead, it checks to see if the socket lock is currently owned by someone, * and either handles the message itself or adds it to the socket's backlog * queue; in the latter case the queued message is processed once the process * owning the socket lock releases it. * * NOTE: Releasing the socket lock while an operation is sleeping overcomes * the problem of a blocked socket operation preventing any other operations * from occurring. However, applications must be careful if they have * multiple threads trying to send (or receive) on the same socket, as these * operations might interfere with each other. For example, doing a connect * and a receive at the same time might allow the receive to consume the * ACK message meant for the connect. While additional work could be done * to try and overcome this, it doesn't seem to be worthwhile at the present. * * NOTE: Releasing the socket lock while an operation is sleeping also ensures * that another operation that must be performed in a non-blocking manner is * not delayed for very long because the lock has already been taken. * * NOTE: This code assumes that certain fields of a port/socket pair are * constant over its lifetime; such fields can be examined without taking * the socket lock and/or port lock, and do not need to be re-read even * after resuming processing after waiting. These fields include: * - socket type * - pointer to socket sk structure (aka tipc_sock structure) * - pointer to port structure * - port reference */ /** * advance_rx_queue - discard first buffer in socket receive queue * * Caller must hold socket lock */ static void advance_rx_queue(struct sock *sk) { kfree_skb(__skb_dequeue(&sk->sk_receive_queue)); } /** * reject_rx_queue - reject all buffers in socket receive queue * * Caller must hold socket lock */ static void reject_rx_queue(struct sock *sk) { struct sk_buff *buf; while ((buf = __skb_dequeue(&sk->sk_receive_queue))) tipc_reject_msg(buf, TIPC_ERR_NO_PORT); } /** * tipc_sk_create - create a TIPC socket * @net: network namespace (must be default network) * @sock: pre-allocated socket structure * @protocol: protocol indicator (must be 0) * @kern: caused by kernel or by userspace? * * This routine creates additional data structures used by the TIPC socket, * initializes them, and links them together. * * Returns 0 on success, errno otherwise */ static int tipc_sk_create(struct net *net, struct socket *sock, int protocol, int kern) { const struct proto_ops *ops; socket_state state; struct sock *sk; struct tipc_port *tp_ptr; /* Validate arguments */ if (unlikely(protocol != 0)) return -EPROTONOSUPPORT; switch (sock->type) { case SOCK_STREAM: ops = &stream_ops; state = SS_UNCONNECTED; break; case SOCK_SEQPACKET: ops = &packet_ops; state = SS_UNCONNECTED; break; case SOCK_DGRAM: case SOCK_RDM: ops = &msg_ops; state = SS_READY; break; default: return -EPROTOTYPE; } /* Allocate socket's protocol area */ if (!kern) sk = sk_alloc(net, AF_TIPC, GFP_KERNEL, &tipc_proto); else sk = sk_alloc(net, AF_TIPC, GFP_KERNEL, &tipc_proto_kern); if (sk == NULL) return -ENOMEM; /* Allocate TIPC port for socket to use */ tp_ptr = tipc_createport(sk, &dispatch, &wakeupdispatch, TIPC_LOW_IMPORTANCE); if (unlikely(!tp_ptr)) { sk_free(sk); return -ENOMEM; } /* Finish initializing socket data structures */ sock->ops = ops; sock->state = state; sock_init_data(sock, sk); sk->sk_backlog_rcv = backlog_rcv; sk->sk_rcvbuf = sysctl_tipc_rmem[1]; sk->sk_data_ready = tipc_data_ready; sk->sk_write_space = tipc_write_space; tipc_sk(sk)->p = tp_ptr; tipc_sk(sk)->conn_timeout = CONN_TIMEOUT_DEFAULT; spin_unlock_bh(tp_ptr->lock); if (sock->state == SS_READY) { tipc_set_portunreturnable(tp_ptr->ref, 1); if (sock->type == SOCK_DGRAM) tipc_set_portunreliable(tp_ptr->ref, 1); } return 0; } /** * tipc_sock_create_local - create TIPC socket from inside TIPC module * @type: socket type - SOCK_RDM or SOCK_SEQPACKET * * We cannot use sock_creat_kern here because it bumps module user count. * Since socket owner and creator is the same module we must make sure * that module count remains zero for module local sockets, otherwise * we cannot do rmmod. * * Returns 0 on success, errno otherwise */ int tipc_sock_create_local(int type, struct socket **res) { int rc; struct sock *sk; rc = sock_create_lite(AF_TIPC, type, 0, res); if (rc < 0) { pr_err("Failed to create kernel socket\n"); return rc; } tipc_sk_create(&init_net, *res, 0, 1); sk = (*res)->sk; return 0; } /** * tipc_sock_release_local - release socket created by tipc_sock_create_local * @sock: the socket to be released. * * Module reference count is not incremented when such sockets are created, * so we must keep it from being decremented when they are released. */ void tipc_sock_release_local(struct socket *sock) { release(sock); sock->ops = NULL; sock_release(sock); } /** * tipc_sock_accept_local - accept a connection on a socket created * with tipc_sock_create_local. Use this function to avoid that * module reference count is inadvertently incremented. * * @sock: the accepting socket * @newsock: reference to the new socket to be created * @flags: socket flags */ int tipc_sock_accept_local(struct socket *sock, struct socket **newsock, int flags) { struct sock *sk = sock->sk; int ret; ret = sock_create_lite(sk->sk_family, sk->sk_type, sk->sk_protocol, newsock); if (ret < 0) return ret; ret = accept(sock, *newsock, flags); if (ret < 0) { sock_release(*newsock); return ret; } (*newsock)->ops = sock->ops; return ret; } /** * release - destroy a TIPC socket * @sock: socket to destroy * * This routine cleans up any messages that are still queued on the socket. * For DGRAM and RDM socket types, all queued messages are rejected. * For SEQPACKET and STREAM socket types, the first message is rejected * and any others are discarded. (If the first message on a STREAM socket * is partially-read, it is discarded and the next one is rejected instead.) * * NOTE: Rejected messages are not necessarily returned to the sender! They * are returned or discarded according to the "destination droppable" setting * specified for the message by the sender. * * Returns 0 on success, errno otherwise */ static int release(struct socket *sock) { struct sock *sk = sock->sk; struct tipc_port *tport; struct sk_buff *buf; int res; /* * Exit if socket isn't fully initialized (occurs when a failed accept() * releases a pre-allocated child socket that was never used) */ if (sk == NULL) return 0; tport = tipc_sk_port(sk); lock_sock(sk); /* * Reject all unreceived messages, except on an active connection * (which disconnects locally & sends a 'FIN+' to peer) */ while (sock->state != SS_DISCONNECTING) { buf = __skb_dequeue(&sk->sk_receive_queue); if (buf == NULL) break; if (TIPC_SKB_CB(buf)->handle != 0) kfree_skb(buf); else { if ((sock->state == SS_CONNECTING) || (sock->state == SS_CONNECTED)) { sock->state = SS_DISCONNECTING; tipc_disconnect(tport->ref); } tipc_reject_msg(buf, TIPC_ERR_NO_PORT); } } /* * Delete TIPC port; this ensures no more messages are queued * (also disconnects an active connection & sends a 'FIN-' to peer) */ res = tipc_deleteport(tport->ref); /* Discard any remaining (connection-based) messages in receive queue */ __skb_queue_purge(&sk->sk_receive_queue); /* Reject any messages that accumulated in backlog queue */ sock->state = SS_DISCONNECTING; release_sock(sk); sock_put(sk); sock->sk = NULL; return res; } /** * bind - associate or disassocate TIPC name(s) with a socket * @sock: socket structure * @uaddr: socket address describing name(s) and desired operation * @uaddr_len: size of socket address data structure * * Name and name sequence binding is indicated using a positive scope value; * a negative scope value unbinds the specified name. Specifying no name * (i.e. a socket address length of 0) unbinds all names from the socket. * * Returns 0 on success, errno otherwise * * NOTE: This routine doesn't need to take the socket lock since it doesn't * access any non-constant socket information. */ static int bind(struct socket *sock, struct sockaddr *uaddr, int uaddr_len) { struct sockaddr_tipc *addr = (struct sockaddr_tipc *)uaddr; u32 portref = tipc_sk_port(sock->sk)->ref; if (unlikely(!uaddr_len)) return tipc_withdraw(portref, 0, NULL); if (uaddr_len < sizeof(struct sockaddr_tipc)) return -EINVAL; if (addr->family != AF_TIPC) return -EAFNOSUPPORT; if (addr->addrtype == TIPC_ADDR_NAME) addr->addr.nameseq.upper = addr->addr.nameseq.lower; else if (addr->addrtype != TIPC_ADDR_NAMESEQ) return -EAFNOSUPPORT; if ((addr->addr.nameseq.type < TIPC_RESERVED_TYPES) && (addr->addr.nameseq.type != TIPC_TOP_SRV) && (addr->addr.nameseq.type != TIPC_CFG_SRV)) return -EACCES; return (addr->scope > 0) ? tipc_publish(portref, addr->scope, &addr->addr.nameseq) : tipc_withdraw(portref, -addr->scope, &addr->addr.nameseq); } /** * get_name - get port ID of socket or peer socket * @sock: socket structure * @uaddr: area for returned socket address * @uaddr_len: area for returned length of socket address * @peer: 0 = own ID, 1 = current peer ID, 2 = current/former peer ID * * Returns 0 on success, errno otherwise * * NOTE: This routine doesn't need to take the socket lock since it only * accesses socket information that is unchanging (or which changes in * a completely predictable manner). */ static int get_name(struct socket *sock, struct sockaddr *uaddr, int *uaddr_len, int peer) { struct sockaddr_tipc *addr = (struct sockaddr_tipc *)uaddr; struct tipc_sock *tsock = tipc_sk(sock->sk); memset(addr, 0, sizeof(*addr)); if (peer) { if ((sock->state != SS_CONNECTED) && ((peer != 2) || (sock->state != SS_DISCONNECTING))) return -ENOTCONN; addr->addr.id.ref = tsock->peer_name.ref; addr->addr.id.node = tsock->peer_name.node; } else { addr->addr.id.ref = tsock->p->ref; addr->addr.id.node = tipc_own_addr; } *uaddr_len = sizeof(*addr); addr->addrtype = TIPC_ADDR_ID; addr->family = AF_TIPC; addr->scope = 0; addr->addr.name.domain = 0; return 0; } /** * poll - read and possibly block on pollmask * @file: file structure associated with the socket * @sock: socket for which to calculate the poll bits * @wait: ??? * * Returns pollmask value * * COMMENTARY: * It appears that the usual socket locking mechanisms are not useful here * since the pollmask info is potentially out-of-date the moment this routine * exits. TCP and other protocols seem to rely on higher level poll routines * to handle any preventable race conditions, so TIPC will do the same ... * * TIPC sets the returned events as follows: * * socket state flags set * ------------ --------- * unconnected no read flags * POLLOUT if port is not congested * * connecting POLLIN/POLLRDNORM if ACK/NACK in rx queue * no write flags * * connected POLLIN/POLLRDNORM if data in rx queue * POLLOUT if port is not congested * * disconnecting POLLIN/POLLRDNORM/POLLHUP * no write flags * * listening POLLIN if SYN in rx queue * no write flags * * ready POLLIN/POLLRDNORM if data in rx queue * [connectionless] POLLOUT (since port cannot be congested) * * IMPORTANT: The fact that a read or write operation is indicated does NOT * imply that the operation will succeed, merely that it should be performed * and will not block. */ static unsigned int poll(struct file *file, struct socket *sock, poll_table *wait) { struct sock *sk = sock->sk; u32 mask = 0; sock_poll_wait(file, sk_sleep(sk), wait); switch ((int)sock->state) { case SS_UNCONNECTED: if (!tipc_sk_port(sk)->congested) mask |= POLLOUT; break; case SS_READY: case SS_CONNECTED: if (!tipc_sk_port(sk)->congested) mask |= POLLOUT; /* fall thru' */ case SS_CONNECTING: case SS_LISTENING: if (!skb_queue_empty(&sk->sk_receive_queue)) mask |= (POLLIN | POLLRDNORM); break; case SS_DISCONNECTING: mask = (POLLIN | POLLRDNORM | POLLHUP); break; } return mask; } /** * dest_name_check - verify user is permitted to send to specified port name * @dest: destination address * @m: descriptor for message to be sent * * Prevents restricted configuration commands from being issued by * unauthorized users. * * Returns 0 if permission is granted, otherwise errno */ static int dest_name_check(struct sockaddr_tipc *dest, struct msghdr *m) { struct tipc_cfg_msg_hdr hdr; if (likely(dest->addr.name.name.type >= TIPC_RESERVED_TYPES)) return 0; if (likely(dest->addr.name.name.type == TIPC_TOP_SRV)) return 0; if (likely(dest->addr.name.name.type != TIPC_CFG_SRV)) return -EACCES; if (!m->msg_iovlen || (m->msg_iov[0].iov_len < sizeof(hdr))) return -EMSGSIZE; if (copy_from_user(&hdr, m->msg_iov[0].iov_base, sizeof(hdr))) return -EFAULT; if ((ntohs(hdr.tcm_type) & 0xC000) && (!capable(CAP_NET_ADMIN))) return -EACCES; return 0; } /** * send_msg - send message in connectionless manner * @iocb: if NULL, indicates that socket lock is already held * @sock: socket structure * @m: message to send * @total_len: length of message * * Message must have an destination specified explicitly. * Used for SOCK_RDM and SOCK_DGRAM messages, * and for 'SYN' messages on SOCK_SEQPACKET and SOCK_STREAM connections. * (Note: 'SYN+' is prohibited on SOCK_STREAM.) * * Returns the number of bytes sent on success, or errno otherwise */ static int send_msg(struct kiocb *iocb, struct socket *sock, struct msghdr *m, size_t total_len) { struct sock *sk = sock->sk; struct tipc_port *tport = tipc_sk_port(sk); struct sockaddr_tipc *dest = (struct sockaddr_tipc *)m->msg_name; int needs_conn; long timeout_val; int res = -EINVAL; if (unlikely(!dest)) return -EDESTADDRREQ; if (unlikely((m->msg_namelen < sizeof(*dest)) || (dest->family != AF_TIPC))) return -EINVAL; if (total_len > TIPC_MAX_USER_MSG_SIZE) return -EMSGSIZE; if (iocb) lock_sock(sk); needs_conn = (sock->state != SS_READY); if (unlikely(needs_conn)) { if (sock->state == SS_LISTENING) { res = -EPIPE; goto exit; } if (sock->state != SS_UNCONNECTED) { res = -EISCONN; goto exit; } if (tport->published) { res = -EOPNOTSUPP; goto exit; } if (dest->addrtype == TIPC_ADDR_NAME) { tport->conn_type = dest->addr.name.name.type; tport->conn_instance = dest->addr.name.name.instance; } /* Abort any pending connection attempts (very unlikely) */ reject_rx_queue(sk); } timeout_val = sock_sndtimeo(sk, m->msg_flags & MSG_DONTWAIT); do { if (dest->addrtype == TIPC_ADDR_NAME) { res = dest_name_check(dest, m); if (res) break; res = tipc_send2name(tport->ref, &dest->addr.name.name, dest->addr.name.domain, m->msg_iovlen, m->msg_iov, total_len); } else if (dest->addrtype == TIPC_ADDR_ID) { res = tipc_send2port(tport->ref, &dest->addr.id, m->msg_iovlen, m->msg_iov, total_len); } else if (dest->addrtype == TIPC_ADDR_MCAST) { if (needs_conn) { res = -EOPNOTSUPP; break; } res = dest_name_check(dest, m); if (res) break; res = tipc_multicast(tport->ref, &dest->addr.nameseq, m->msg_iovlen, m->msg_iov, total_len); } if (likely(res != -ELINKCONG)) { if (needs_conn && (res >= 0)) sock->state = SS_CONNECTING; break; } if (timeout_val <= 0L) { res = timeout_val ? timeout_val : -EWOULDBLOCK; break; } release_sock(sk); timeout_val = wait_event_interruptible_timeout(*sk_sleep(sk), !tport->congested, timeout_val); lock_sock(sk); } while (1); exit: if (iocb) release_sock(sk); return res; } /** * send_packet - send a connection-oriented message * @iocb: if NULL, indicates that socket lock is already held * @sock: socket structure * @m: message to send * @total_len: length of message * * Used for SOCK_SEQPACKET messages and SOCK_STREAM data. * * Returns the number of bytes sent on success, or errno otherwise */ static int send_packet(struct kiocb *iocb, struct socket *sock, struct msghdr *m, size_t total_len) { struct sock *sk = sock->sk; struct tipc_port *tport = tipc_sk_port(sk); struct sockaddr_tipc *dest = (struct sockaddr_tipc *)m->msg_name; long timeout_val; int res; /* Handle implied connection establishment */ if (unlikely(dest)) return send_msg(iocb, sock, m, total_len); if (total_len > TIPC_MAX_USER_MSG_SIZE) return -EMSGSIZE; if (iocb) lock_sock(sk); timeout_val = sock_sndtimeo(sk, m->msg_flags & MSG_DONTWAIT); do { if (unlikely(sock->state != SS_CONNECTED)) { if (sock->state == SS_DISCONNECTING) res = -EPIPE; else res = -ENOTCONN; break; } res = tipc_send(tport->ref, m->msg_iovlen, m->msg_iov, total_len); if (likely(res != -ELINKCONG)) break; if (timeout_val <= 0L) { res = timeout_val ? timeout_val : -EWOULDBLOCK; break; } release_sock(sk); timeout_val = wait_event_interruptible_timeout(*sk_sleep(sk), (!tport->congested || !tport->connected), timeout_val); lock_sock(sk); } while (1); if (iocb) release_sock(sk); return res; } /** * send_stream - send stream-oriented data * @iocb: (unused) * @sock: socket structure * @m: data to send * @total_len: total length of data to be sent * * Used for SOCK_STREAM data. * * Returns the number of bytes sent on success (or partial success), * or errno if no data sent */ static int send_stream(struct kiocb *iocb, struct socket *sock, struct msghdr *m, size_t total_len) { struct sock *sk = sock->sk; struct tipc_port *tport = tipc_sk_port(sk); struct msghdr my_msg; struct iovec my_iov; struct iovec *curr_iov; int curr_iovlen; char __user *curr_start; u32 hdr_size; int curr_left; int bytes_to_send; int bytes_sent; int res; lock_sock(sk); /* Handle special cases where there is no connection */ if (unlikely(sock->state != SS_CONNECTED)) { if (sock->state == SS_UNCONNECTED) { res = send_packet(NULL, sock, m, total_len); goto exit; } else if (sock->state == SS_DISCONNECTING) { res = -EPIPE; goto exit; } else { res = -ENOTCONN; goto exit; } } if (unlikely(m->msg_name)) { res = -EISCONN; goto exit; } if (total_len > (unsigned int)INT_MAX) { res = -EMSGSIZE; goto exit; } /* * Send each iovec entry using one or more messages * * Note: This algorithm is good for the most likely case * (i.e. one large iovec entry), but could be improved to pass sets * of small iovec entries into send_packet(). */ curr_iov = m->msg_iov; curr_iovlen = m->msg_iovlen; my_msg.msg_iov = &my_iov; my_msg.msg_iovlen = 1; my_msg.msg_flags = m->msg_flags; my_msg.msg_name = NULL; bytes_sent = 0; hdr_size = msg_hdr_sz(&tport->phdr); while (curr_iovlen--) { curr_start = curr_iov->iov_base; curr_left = curr_iov->iov_len; while (curr_left) { bytes_to_send = tport->max_pkt - hdr_size; if (bytes_to_send > TIPC_MAX_USER_MSG_SIZE) bytes_to_send = TIPC_MAX_USER_MSG_SIZE; if (curr_left < bytes_to_send) bytes_to_send = curr_left; my_iov.iov_base = curr_start; my_iov.iov_len = bytes_to_send; res = send_packet(NULL, sock, &my_msg, bytes_to_send); if (res < 0) { if (bytes_sent) res = bytes_sent; goto exit; } curr_left -= bytes_to_send; curr_start += bytes_to_send; bytes_sent += bytes_to_send; } curr_iov++; } res = bytes_sent; exit: release_sock(sk); return res; } /** * auto_connect - complete connection setup to a remote port * @sock: socket structure * @msg: peer's response message * * Returns 0 on success, errno otherwise */ static int auto_connect(struct socket *sock, struct tipc_msg *msg) { struct tipc_sock *tsock = tipc_sk(sock->sk); struct tipc_port *p_ptr; tsock->peer_name.ref = msg_origport(msg); tsock->peer_name.node = msg_orignode(msg); p_ptr = tipc_port_deref(tsock->p->ref); if (!p_ptr) return -EINVAL; __tipc_connect(tsock->p->ref, p_ptr, &tsock->peer_name); if (msg_importance(msg) > TIPC_CRITICAL_IMPORTANCE) return -EINVAL; msg_set_importance(&p_ptr->phdr, (u32)msg_importance(msg)); sock->state = SS_CONNECTED; return 0; } /** * set_orig_addr - capture sender's address for received message * @m: descriptor for message info * @msg: received message header * * Note: Address is not captured if not requested by receiver. */ static void set_orig_addr(struct msghdr *m, struct tipc_msg *msg) { struct sockaddr_tipc *addr = (struct sockaddr_tipc *)m->msg_name; if (addr) { addr->family = AF_TIPC; addr->addrtype = TIPC_ADDR_ID; memset(&addr->addr, 0, sizeof(addr->addr)); addr->addr.id.ref = msg_origport(msg); addr->addr.id.node = msg_orignode(msg); addr->addr.name.domain = 0; /* could leave uninitialized */ addr->scope = 0; /* could leave uninitialized */ m->msg_namelen = sizeof(struct sockaddr_tipc); } } /** * anc_data_recv - optionally capture ancillary data for received message * @m: descriptor for message info * @msg: received message header * @tport: TIPC port associated with message * * Note: Ancillary data is not captured if not requested by receiver. * * Returns 0 if successful, otherwise errno */ static int anc_data_recv(struct msghdr *m, struct tipc_msg *msg, struct tipc_port *tport) { u32 anc_data[3]; u32 err; u32 dest_type; int has_name; int res; if (likely(m->msg_controllen == 0)) return 0; /* Optionally capture errored message object(s) */ err = msg ? msg_errcode(msg) : 0; if (unlikely(err)) { anc_data[0] = err; anc_data[1] = msg_data_sz(msg); res = put_cmsg(m, SOL_TIPC, TIPC_ERRINFO, 8, anc_data); if (res) return res; if (anc_data[1]) { res = put_cmsg(m, SOL_TIPC, TIPC_RETDATA, anc_data[1], msg_data(msg)); if (res) return res; } } /* Optionally capture message destination object */ dest_type = msg ? msg_type(msg) : TIPC_DIRECT_MSG; switch (dest_type) { case TIPC_NAMED_MSG: has_name = 1; anc_data[0] = msg_nametype(msg); anc_data[1] = msg_namelower(msg); anc_data[2] = msg_namelower(msg); break; case TIPC_MCAST_MSG: has_name = 1; anc_data[0] = msg_nametype(msg); anc_data[1] = msg_namelower(msg); anc_data[2] = msg_nameupper(msg); break; case TIPC_CONN_MSG: has_name = (tport->conn_type != 0); anc_data[0] = tport->conn_type; anc_data[1] = tport->conn_instance; anc_data[2] = tport->conn_instance; break; default: has_name = 0; } if (has_name) { res = put_cmsg(m, SOL_TIPC, TIPC_DESTNAME, 12, anc_data); if (res) return res; } return 0; } /** * recv_msg - receive packet-oriented message * @iocb: (unused) * @m: descriptor for message info * @buf_len: total size of user buffer area * @flags: receive flags * * Used for SOCK_DGRAM, SOCK_RDM, and SOCK_SEQPACKET messages. * If the complete message doesn't fit in user area, truncate it. * * Returns size of returned message data, errno otherwise */ static int recv_msg(struct kiocb *iocb, struct socket *sock, struct msghdr *m, size_t buf_len, int flags) { struct sock *sk = sock->sk; struct tipc_port *tport = tipc_sk_port(sk); struct sk_buff *buf; struct tipc_msg *msg; long timeout; unsigned int sz; u32 err; int res; /* Catch invalid receive requests */ if (unlikely(!buf_len)) return -EINVAL; lock_sock(sk); if (unlikely(sock->state == SS_UNCONNECTED)) { res = -ENOTCONN; goto exit; } /* will be updated in set_orig_addr() if needed */ m->msg_namelen = 0; timeout = sock_rcvtimeo(sk, flags & MSG_DONTWAIT); restart: /* Look for a message in receive queue; wait if necessary */ while (skb_queue_empty(&sk->sk_receive_queue)) { if (sock->state == SS_DISCONNECTING) { res = -ENOTCONN; goto exit; } if (timeout <= 0L) { res = timeout ? timeout : -EWOULDBLOCK; goto exit; } release_sock(sk); timeout = wait_event_interruptible_timeout(*sk_sleep(sk), tipc_rx_ready(sock), timeout); lock_sock(sk); } /* Look at first message in receive queue */ buf = skb_peek(&sk->sk_receive_queue); msg = buf_msg(buf); sz = msg_data_sz(msg); err = msg_errcode(msg); /* Discard an empty non-errored message & try again */ if ((!sz) && (!err)) { advance_rx_queue(sk); goto restart; } /* Capture sender's address (optional) */ set_orig_addr(m, msg); /* Capture ancillary data (optional) */ res = anc_data_recv(m, msg, tport); if (res) goto exit; /* Capture message data (if valid) & compute return value (always) */ if (!err) { if (unlikely(buf_len < sz)) { sz = buf_len; m->msg_flags |= MSG_TRUNC; } res = skb_copy_datagram_iovec(buf, msg_hdr_sz(msg), m->msg_iov, sz); if (res) goto exit; res = sz; } else { if ((sock->state == SS_READY) || ((err == TIPC_CONN_SHUTDOWN) || m->msg_control)) res = 0; else res = -ECONNRESET; } /* Consume received message (optional) */ if (likely(!(flags & MSG_PEEK))) { if ((sock->state != SS_READY) && (++tport->conn_unacked >= TIPC_FLOW_CONTROL_WIN)) tipc_acknowledge(tport->ref, tport->conn_unacked); advance_rx_queue(sk); } exit: release_sock(sk); return res; } /** * recv_stream - receive stream-oriented data * @iocb: (unused) * @m: descriptor for message info * @buf_len: total size of user buffer area * @flags: receive flags * * Used for SOCK_STREAM messages only. If not enough data is available * will optionally wait for more; never truncates data. * * Returns size of returned message data, errno otherwise */ static int recv_stream(struct kiocb *iocb, struct socket *sock, struct msghdr *m, size_t buf_len, int flags) { struct sock *sk = sock->sk; struct tipc_port *tport = tipc_sk_port(sk); struct sk_buff *buf; struct tipc_msg *msg; long timeout; unsigned int sz; int sz_to_copy, target, needed; int sz_copied = 0; u32 err; int res = 0; /* Catch invalid receive attempts */ if (unlikely(!buf_len)) return -EINVAL; lock_sock(sk); if (unlikely((sock->state == SS_UNCONNECTED))) { res = -ENOTCONN; goto exit; } /* will be updated in set_orig_addr() if needed */ m->msg_namelen = 0; target = sock_rcvlowat(sk, flags & MSG_WAITALL, buf_len); timeout = sock_rcvtimeo(sk, flags & MSG_DONTWAIT); restart: /* Look for a message in receive queue; wait if necessary */ while (skb_queue_empty(&sk->sk_receive_queue)) { if (sock->state == SS_DISCONNECTING) { res = -ENOTCONN; goto exit; } if (timeout <= 0L) { res = timeout ? timeout : -EWOULDBLOCK; goto exit; } release_sock(sk); timeout = wait_event_interruptible_timeout(*sk_sleep(sk), tipc_rx_ready(sock), timeout); lock_sock(sk); } /* Look at first message in receive queue */ buf = skb_peek(&sk->sk_receive_queue); msg = buf_msg(buf); sz = msg_data_sz(msg); err = msg_errcode(msg); /* Discard an empty non-errored message & try again */ if ((!sz) && (!err)) { advance_rx_queue(sk); goto restart; } /* Optionally capture sender's address & ancillary data of first msg */ if (sz_copied == 0) { set_orig_addr(m, msg); res = anc_data_recv(m, msg, tport); if (res) goto exit; } /* Capture message data (if valid) & compute return value (always) */ if (!err) { u32 offset = (u32)(unsigned long)(TIPC_SKB_CB(buf)->handle); sz -= offset; needed = (buf_len - sz_copied); sz_to_copy = (sz <= needed) ? sz : needed; res = skb_copy_datagram_iovec(buf, msg_hdr_sz(msg) + offset, m->msg_iov, sz_to_copy); if (res) goto exit; sz_copied += sz_to_copy; if (sz_to_copy < sz) { if (!(flags & MSG_PEEK)) TIPC_SKB_CB(buf)->handle = (void *)(unsigned long)(offset + sz_to_copy); goto exit; } } else { if (sz_copied != 0) goto exit; /* can't add error msg to valid data */ if ((err == TIPC_CONN_SHUTDOWN) || m->msg_control) res = 0; else res = -ECONNRESET; } /* Consume received message (optional) */ if (likely(!(flags & MSG_PEEK))) { if (unlikely(++tport->conn_unacked >= TIPC_FLOW_CONTROL_WIN)) tipc_acknowledge(tport->ref, tport->conn_unacked); advance_rx_queue(sk); } /* Loop around if more data is required */ if ((sz_copied < buf_len) && /* didn't get all requested data */ (!skb_queue_empty(&sk->sk_receive_queue) || (sz_copied < target)) && /* and more is ready or required */ (!(flags & MSG_PEEK)) && /* and aren't just peeking at data */ (!err)) /* and haven't reached a FIN */ goto restart; exit: release_sock(sk); return sz_copied ? sz_copied : res; } /** * tipc_write_space - wake up thread if port congestion is released * @sk: socket */ static void tipc_write_space(struct sock *sk) { struct socket_wq *wq; rcu_read_lock(); wq = rcu_dereference(sk->sk_wq); if (wq_has_sleeper(wq)) wake_up_interruptible_sync_poll(&wq->wait, POLLOUT | POLLWRNORM | POLLWRBAND); rcu_read_unlock(); } /** * tipc_data_ready - wake up threads to indicate messages have been received * @sk: socket * @len: the length of messages */ static void tipc_data_ready(struct sock *sk, int len) { struct socket_wq *wq; rcu_read_lock(); wq = rcu_dereference(sk->sk_wq); if (wq_has_sleeper(wq)) wake_up_interruptible_sync_poll(&wq->wait, POLLIN | POLLRDNORM | POLLRDBAND); rcu_read_unlock(); } /** * filter_connect - Handle all incoming messages for a connection-based socket * @tsock: TIPC socket * @msg: message * * Returns TIPC error status code and socket error status code * once it encounters some errors */ static u32 filter_connect(struct tipc_sock *tsock, struct sk_buff **buf) { struct socket *sock = tsock->sk.sk_socket; struct tipc_msg *msg = buf_msg(*buf); struct sock *sk = &tsock->sk; u32 retval = TIPC_ERR_NO_PORT; int res; if (msg_mcast(msg)) return retval; switch ((int)sock->state) { case SS_CONNECTED: /* Accept only connection-based messages sent by peer */ if (msg_connected(msg) && tipc_port_peer_msg(tsock->p, msg)) { if (unlikely(msg_errcode(msg))) { sock->state = SS_DISCONNECTING; __tipc_disconnect(tsock->p); } retval = TIPC_OK; } break; case SS_CONNECTING: /* Accept only ACK or NACK message */ if (unlikely(msg_errcode(msg))) { sock->state = SS_DISCONNECTING; sk->sk_err = -ECONNREFUSED; retval = TIPC_OK; break; } if (unlikely(!msg_connected(msg))) break; res = auto_connect(sock, msg); if (res) { sock->state = SS_DISCONNECTING; sk->sk_err = res; retval = TIPC_OK; break; } /* If an incoming message is an 'ACK-', it should be * discarded here because it doesn't contain useful * data. In addition, we should try to wake up * connect() routine if sleeping. */ if (msg_data_sz(msg) == 0) { kfree_skb(*buf); *buf = NULL; if (waitqueue_active(sk_sleep(sk))) wake_up_interruptible(sk_sleep(sk)); } retval = TIPC_OK; break; case SS_LISTENING: case SS_UNCONNECTED: /* Accept only SYN message */ if (!msg_connected(msg) && !(msg_errcode(msg))) retval = TIPC_OK; break; case SS_DISCONNECTING: break; default: pr_err("Unknown socket state %u\n", sock->state); } return retval; } /** * rcvbuf_limit - get proper overload limit of socket receive queue * @sk: socket * @buf: message * * For all connection oriented messages, irrespective of importance, * the default overload value (i.e. 67MB) is set as limit. * * For all connectionless messages, by default new queue limits are * as belows: * * TIPC_LOW_IMPORTANCE (4 MB) * TIPC_MEDIUM_IMPORTANCE (8 MB) * TIPC_HIGH_IMPORTANCE (16 MB) * TIPC_CRITICAL_IMPORTANCE (32 MB) * * Returns overload limit according to corresponding message importance */ static unsigned int rcvbuf_limit(struct sock *sk, struct sk_buff *buf) { struct tipc_msg *msg = buf_msg(buf); unsigned int limit; if (msg_connected(msg)) limit = sysctl_tipc_rmem[2]; else limit = sk->sk_rcvbuf >> TIPC_CRITICAL_IMPORTANCE << msg_importance(msg); return limit; } /** * filter_rcv - validate incoming message * @sk: socket * @buf: message * * Enqueues message on receive queue if acceptable; optionally handles * disconnect indication for a connected socket. * * Called with socket lock already taken; port lock may also be taken. * * Returns TIPC error status code (TIPC_OK if message is not to be rejected) */ static u32 filter_rcv(struct sock *sk, struct sk_buff *buf) { struct socket *sock = sk->sk_socket; struct tipc_msg *msg = buf_msg(buf); unsigned int limit = rcvbuf_limit(sk, buf); u32 res = TIPC_OK; /* Reject message if it is wrong sort of message for socket */ if (msg_type(msg) > TIPC_DIRECT_MSG) return TIPC_ERR_NO_PORT; if (sock->state == SS_READY) { if (msg_connected(msg)) return TIPC_ERR_NO_PORT; } else { res = filter_connect(tipc_sk(sk), &buf); if (res != TIPC_OK || buf == NULL) return res; } /* Reject message if there isn't room to queue it */ if (sk_rmem_alloc_get(sk) + buf->truesize >= limit) return TIPC_ERR_OVERLOAD; /* Enqueue message */ TIPC_SKB_CB(buf)->handle = 0; __skb_queue_tail(&sk->sk_receive_queue, buf); skb_set_owner_r(buf, sk); sk->sk_data_ready(sk, 0); return TIPC_OK; } /** * backlog_rcv - handle incoming message from backlog queue * @sk: socket * @buf: message * * Caller must hold socket lock, but not port lock. * * Returns 0 */ static int backlog_rcv(struct sock *sk, struct sk_buff *buf) { u32 res; res = filter_rcv(sk, buf); if (res) tipc_reject_msg(buf, res); return 0; } /** * dispatch - handle incoming message * @tport: TIPC port that received message * @buf: message * * Called with port lock already taken. * * Returns TIPC error status code (TIPC_OK if message is not to be rejected) */ static u32 dispatch(struct tipc_port *tport, struct sk_buff *buf) { struct sock *sk = (struct sock *)tport->usr_handle; u32 res; /* * Process message if socket is unlocked; otherwise add to backlog queue * * This code is based on sk_receive_skb(), but must be distinct from it * since a TIPC-specific filter/reject mechanism is utilized */ bh_lock_sock(sk); if (!sock_owned_by_user(sk)) { res = filter_rcv(sk, buf); } else { if (sk_add_backlog(sk, buf, rcvbuf_limit(sk, buf))) res = TIPC_ERR_OVERLOAD; else res = TIPC_OK; } bh_unlock_sock(sk); return res; } /** * wakeupdispatch - wake up port after congestion * @tport: port to wakeup * * Called with port lock already taken. */ static void wakeupdispatch(struct tipc_port *tport) { struct sock *sk = (struct sock *)tport->usr_handle; sk->sk_write_space(sk); } /** * connect - establish a connection to another TIPC port * @sock: socket structure * @dest: socket address for destination port * @destlen: size of socket address data structure * @flags: file-related flags associated with socket * * Returns 0 on success, errno otherwise */ static int connect(struct socket *sock, struct sockaddr *dest, int destlen, int flags) { struct sock *sk = sock->sk; struct sockaddr_tipc *dst = (struct sockaddr_tipc *)dest; struct msghdr m = {NULL,}; unsigned int timeout; int res; lock_sock(sk); /* For now, TIPC does not allow use of connect() with DGRAM/RDM types */ if (sock->state == SS_READY) { res = -EOPNOTSUPP; goto exit; } /* * Reject connection attempt using multicast address * * Note: send_msg() validates the rest of the address fields, * so there's no need to do it here */ if (dst->addrtype == TIPC_ADDR_MCAST) { res = -EINVAL; goto exit; } timeout = (flags & O_NONBLOCK) ? 0 : tipc_sk(sk)->conn_timeout; switch (sock->state) { case SS_UNCONNECTED: /* Send a 'SYN-' to destination */ m.msg_name = dest; m.msg_namelen = destlen; /* If connect is in non-blocking case, set MSG_DONTWAIT to * indicate send_msg() is never blocked. */ if (!timeout) m.msg_flags = MSG_DONTWAIT; res = send_msg(NULL, sock, &m, 0); if ((res < 0) && (res != -EWOULDBLOCK)) goto exit; /* Just entered SS_CONNECTING state; the only * difference is that return value in non-blocking * case is EINPROGRESS, rather than EALREADY. */ res = -EINPROGRESS; break; case SS_CONNECTING: res = -EALREADY; break; case SS_CONNECTED: res = -EISCONN; break; default: res = -EINVAL; goto exit; } if (sock->state == SS_CONNECTING) { if (!timeout) goto exit; /* Wait until an 'ACK' or 'RST' arrives, or a timeout occurs */ release_sock(sk); res = wait_event_interruptible_timeout(*sk_sleep(sk), sock->state != SS_CONNECTING, timeout ? (long)msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT); lock_sock(sk); if (res <= 0) { if (res == 0) res = -ETIMEDOUT; else ; /* leave "res" unchanged */ goto exit; } } if (unlikely(sock->state == SS_DISCONNECTING)) res = sock_error(sk); else res = 0; exit: release_sock(sk); return res; } /** * listen - allow socket to listen for incoming connections * @sock: socket structure * @len: (unused) * * Returns 0 on success, errno otherwise */ static int listen(struct socket *sock, int len) { struct sock *sk = sock->sk; int res; lock_sock(sk); if (sock->state != SS_UNCONNECTED) res = -EINVAL; else { sock->state = SS_LISTENING; res = 0; } release_sock(sk); return res; } /** * accept - wait for connection request * @sock: listening socket * @newsock: new socket that is to be connected * @flags: file-related flags associated with socket * * Returns 0 on success, errno otherwise */ static int accept(struct socket *sock, struct socket *new_sock, int flags) { struct sock *new_sk, *sk = sock->sk; struct sk_buff *buf; struct tipc_sock *new_tsock; struct tipc_port *new_tport; struct tipc_msg *msg; u32 new_ref; int res; lock_sock(sk); if (sock->state != SS_LISTENING) { res = -EINVAL; goto exit; } while (skb_queue_empty(&sk->sk_receive_queue)) { if (flags & O_NONBLOCK) { res = -EWOULDBLOCK; goto exit; } release_sock(sk); res = wait_event_interruptible(*sk_sleep(sk), (!skb_queue_empty(&sk->sk_receive_queue))); lock_sock(sk); if (res) goto exit; } buf = skb_peek(&sk->sk_receive_queue); res = tipc_sk_create(sock_net(sock->sk), new_sock, 0, 1); if (res) goto exit; new_sk = new_sock->sk; new_tsock = tipc_sk(new_sk); new_tport = new_tsock->p; new_ref = new_tport->ref; msg = buf_msg(buf); /* we lock on new_sk; but lockdep sees the lock on sk */ lock_sock_nested(new_sk, SINGLE_DEPTH_NESTING); /* * Reject any stray messages received by new socket * before the socket lock was taken (very, very unlikely) */ reject_rx_queue(new_sk); /* Connect new socket to it's peer */ new_tsock->peer_name.ref = msg_origport(msg); new_tsock->peer_name.node = msg_orignode(msg); tipc_connect(new_ref, &new_tsock->peer_name); new_sock->state = SS_CONNECTED; tipc_set_portimportance(new_ref, msg_importance(msg)); if (msg_named(msg)) { new_tport->conn_type = msg_nametype(msg); new_tport->conn_instance = msg_nameinst(msg); } /* * Respond to 'SYN-' by discarding it & returning 'ACK'-. * Respond to 'SYN+' by queuing it on new socket. */ if (!msg_data_sz(msg)) { struct msghdr m = {NULL,}; advance_rx_queue(sk); send_packet(NULL, new_sock, &m, 0); } else { __skb_dequeue(&sk->sk_receive_queue); __skb_queue_head(&new_sk->sk_receive_queue, buf); skb_set_owner_r(buf, new_sk); } release_sock(new_sk); exit: release_sock(sk); return res; } /** * shutdown - shutdown socket connection * @sock: socket structure * @how: direction to close (must be SHUT_RDWR) * * Terminates connection (if necessary), then purges socket's receive queue. * * Returns 0 on success, errno otherwise */ static int shutdown(struct socket *sock, int how) { struct sock *sk = sock->sk; struct tipc_port *tport = tipc_sk_port(sk); struct sk_buff *buf; int res; if (how != SHUT_RDWR) return -EINVAL; lock_sock(sk); switch (sock->state) { case SS_CONNECTING: case SS_CONNECTED: restart: /* Disconnect and send a 'FIN+' or 'FIN-' message to peer */ buf = __skb_dequeue(&sk->sk_receive_queue); if (buf) { if (TIPC_SKB_CB(buf)->handle != 0) { kfree_skb(buf); goto restart; } tipc_disconnect(tport->ref); tipc_reject_msg(buf, TIPC_CONN_SHUTDOWN); } else { tipc_shutdown(tport->ref); } sock->state = SS_DISCONNECTING; /* fall through */ case SS_DISCONNECTING: /* Discard any unreceived messages */ __skb_queue_purge(&sk->sk_receive_queue); /* Wake up anyone sleeping in poll */ sk->sk_state_change(sk); res = 0; break; default: res = -ENOTCONN; } release_sock(sk); return res; } /** * setsockopt - set socket option * @sock: socket structure * @lvl: option level * @opt: option identifier * @ov: pointer to new option value * @ol: length of option value * * For stream sockets only, accepts and ignores all IPPROTO_TCP options * (to ease compatibility). * * Returns 0 on success, errno otherwise */ static int setsockopt(struct socket *sock, int lvl, int opt, char __user *ov, unsigned int ol) { struct sock *sk = sock->sk; struct tipc_port *tport = tipc_sk_port(sk); u32 value; int res; if ((lvl == IPPROTO_TCP) && (sock->type == SOCK_STREAM)) return 0; if (lvl != SOL_TIPC) return -ENOPROTOOPT; if (ol < sizeof(value)) return -EINVAL; res = get_user(value, (u32 __user *)ov); if (res) return res; lock_sock(sk); switch (opt) { case TIPC_IMPORTANCE: res = tipc_set_portimportance(tport->ref, value); break; case TIPC_SRC_DROPPABLE: if (sock->type != SOCK_STREAM) res = tipc_set_portunreliable(tport->ref, value); else res = -ENOPROTOOPT; break; case TIPC_DEST_DROPPABLE: res = tipc_set_portunreturnable(tport->ref, value); break; case TIPC_CONN_TIMEOUT: tipc_sk(sk)->conn_timeout = value; /* no need to set "res", since already 0 at this point */ break; default: res = -EINVAL; } release_sock(sk); return res; } /** * getsockopt - get socket option * @sock: socket structure * @lvl: option level * @opt: option identifier * @ov: receptacle for option value * @ol: receptacle for length of option value * * For stream sockets only, returns 0 length result for all IPPROTO_TCP options * (to ease compatibility). * * Returns 0 on success, errno otherwise */ static int getsockopt(struct socket *sock, int lvl, int opt, char __user *ov, int __user *ol) { struct sock *sk = sock->sk; struct tipc_port *tport = tipc_sk_port(sk); int len; u32 value; int res; if ((lvl == IPPROTO_TCP) && (sock->type == SOCK_STREAM)) return put_user(0, ol); if (lvl != SOL_TIPC) return -ENOPROTOOPT; res = get_user(len, ol); if (res) return res; lock_sock(sk); switch (opt) { case TIPC_IMPORTANCE: res = tipc_portimportance(tport->ref, &value); break; case TIPC_SRC_DROPPABLE: res = tipc_portunreliable(tport->ref, &value); break; case TIPC_DEST_DROPPABLE: res = tipc_portunreturnable(tport->ref, &value); break; case TIPC_CONN_TIMEOUT: value = tipc_sk(sk)->conn_timeout; /* no need to set "res", since already 0 at this point */ break; case TIPC_NODE_RECVQ_DEPTH: value = 0; /* was tipc_queue_size, now obsolete */ break; case TIPC_SOCK_RECVQ_DEPTH: value = skb_queue_len(&sk->sk_receive_queue); break; default: res = -EINVAL; } release_sock(sk); if (res) return res; /* "get" failed */ if (len < sizeof(value)) return -EINVAL; if (copy_to_user(ov, &value, sizeof(value))) return -EFAULT; return put_user(sizeof(value), ol); } /* Protocol switches for the various types of TIPC sockets */ static const struct proto_ops msg_ops = { .owner = THIS_MODULE, .family = AF_TIPC, .release = release, .bind = bind, .connect = connect, .socketpair = sock_no_socketpair, .accept = sock_no_accept, .getname = get_name, .poll = poll, .ioctl = sock_no_ioctl, .listen = sock_no_listen, .shutdown = shutdown, .setsockopt = setsockopt, .getsockopt = getsockopt, .sendmsg = send_msg, .recvmsg = recv_msg, .mmap = sock_no_mmap, .sendpage = sock_no_sendpage }; static const struct proto_ops packet_ops = { .owner = THIS_MODULE, .family = AF_TIPC, .release = release, .bind = bind, .connect = connect, .socketpair = sock_no_socketpair, .accept = accept, .getname = get_name, .poll = poll, .ioctl = sock_no_ioctl, .listen = listen, .shutdown = shutdown, .setsockopt = setsockopt, .getsockopt = getsockopt, .sendmsg = send_packet, .recvmsg = recv_msg, .mmap = sock_no_mmap, .sendpage = sock_no_sendpage }; static const struct proto_ops stream_ops = { .owner = THIS_MODULE, .family = AF_TIPC, .release = release, .bind = bind, .connect = connect, .socketpair = sock_no_socketpair, .accept = accept, .getname = get_name, .poll = poll, .ioctl = sock_no_ioctl, .listen = listen, .shutdown = shutdown, .setsockopt = setsockopt, .getsockopt = getsockopt, .sendmsg = send_stream, .recvmsg = recv_stream, .mmap = sock_no_mmap, .sendpage = sock_no_sendpage }; static const struct net_proto_family tipc_family_ops = { .owner = THIS_MODULE, .family = AF_TIPC, .create = tipc_sk_create }; static struct proto tipc_proto = { .name = "TIPC", .owner = THIS_MODULE, .obj_size = sizeof(struct tipc_sock), .sysctl_rmem = sysctl_tipc_rmem }; static struct proto tipc_proto_kern = { .name = "TIPC", .obj_size = sizeof(struct tipc_sock), .sysctl_rmem = sysctl_tipc_rmem }; /** * tipc_socket_init - initialize TIPC socket interface * * Returns 0 on success, errno otherwise */ int tipc_socket_init(void) { int res; res = proto_register(&tipc_proto, 1); if (res) { pr_err("Failed to register TIPC protocol type\n"); goto out; } res = sock_register(&tipc_family_ops); if (res) { pr_err("Failed to register TIPC socket type\n"); proto_unregister(&tipc_proto); goto out; } sockets_enabled = 1; out: return res; } /** * tipc_socket_stop - stop TIPC socket interface */ void tipc_socket_stop(void) { if (!sockets_enabled) return; sockets_enabled = 0; sock_unregister(tipc_family_ops.family); proto_unregister(&tipc_proto); }