// SPDX-License-Identifier: GPL-2.0-only /* * BSS client mode implementation * Copyright 2003-2008, Jouni Malinen * Copyright 2004, Instant802 Networks, Inc. * Copyright 2005, Devicescape Software, Inc. * Copyright 2006-2007 Jiri Benc * Copyright 2007, Michael Wu * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015 - 2017 Intel Deutschland GmbH * Copyright (C) 2018 - 2020 Intel Corporation */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ieee80211_i.h" #include "driver-ops.h" #include "rate.h" #include "led.h" #include "fils_aead.h" #define IEEE80211_AUTH_TIMEOUT (HZ / 5) #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2) #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10) #define IEEE80211_AUTH_TIMEOUT_SAE (HZ * 2) #define IEEE80211_AUTH_MAX_TRIES 3 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5) #define IEEE80211_ASSOC_TIMEOUT (HZ / 5) #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2) #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10) #define IEEE80211_ASSOC_MAX_TRIES 3 static int max_nullfunc_tries = 2; module_param(max_nullfunc_tries, int, 0644); MODULE_PARM_DESC(max_nullfunc_tries, "Maximum nullfunc tx tries before disconnecting (reason 4)."); static int max_probe_tries = 5; module_param(max_probe_tries, int, 0644); MODULE_PARM_DESC(max_probe_tries, "Maximum probe tries before disconnecting (reason 4)."); /* * Beacon loss timeout is calculated as N frames times the * advertised beacon interval. This may need to be somewhat * higher than what hardware might detect to account for * delays in the host processing frames. But since we also * probe on beacon miss before declaring the connection lost * default to what we want. */ static int beacon_loss_count = 7; module_param(beacon_loss_count, int, 0644); MODULE_PARM_DESC(beacon_loss_count, "Number of beacon intervals before we decide beacon was lost."); /* * Time the connection can be idle before we probe * it to see if we can still talk to the AP. */ #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ) /* * Time we wait for a probe response after sending * a probe request because of beacon loss or for * checking the connection still works. */ static int probe_wait_ms = 500; module_param(probe_wait_ms, int, 0644); MODULE_PARM_DESC(probe_wait_ms, "Maximum time(ms) to wait for probe response" " before disconnecting (reason 4)."); /* * How many Beacon frames need to have been used in average signal strength * before starting to indicate signal change events. */ #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4 /* * We can have multiple work items (and connection probing) * scheduling this timer, but we need to take care to only * reschedule it when it should fire _earlier_ than it was * asked for before, or if it's not pending right now. This * function ensures that. Note that it then is required to * run this function for all timeouts after the first one * has happened -- the work that runs from this timer will * do that. */ static void run_again(struct ieee80211_sub_if_data *sdata, unsigned long timeout) { sdata_assert_lock(sdata); if (!timer_pending(&sdata->u.mgd.timer) || time_before(timeout, sdata->u.mgd.timer.expires)) mod_timer(&sdata->u.mgd.timer, timeout); } void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata) { if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER) return; if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) return; mod_timer(&sdata->u.mgd.bcn_mon_timer, round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout)); } void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; if (unlikely(!ifmgd->associated)) return; if (ifmgd->probe_send_count) ifmgd->probe_send_count = 0; if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) return; mod_timer(&ifmgd->conn_mon_timer, round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME)); } static int ecw2cw(int ecw) { return (1 << ecw) - 1; } static u32 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_channel *channel, u32 vht_cap_info, const struct ieee80211_ht_operation *ht_oper, const struct ieee80211_vht_operation *vht_oper, const struct ieee80211_he_operation *he_oper, struct cfg80211_chan_def *chandef, bool tracking) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct cfg80211_chan_def vht_chandef; struct ieee80211_sta_ht_cap sta_ht_cap; u32 ht_cfreq, ret; memset(chandef, 0, sizeof(struct cfg80211_chan_def)); chandef->chan = channel; chandef->width = NL80211_CHAN_WIDTH_20_NOHT; chandef->center_freq1 = channel->center_freq; chandef->freq1_offset = channel->freq_offset; if (channel->band == NL80211_BAND_6GHZ) { if (!ieee80211_chandef_he_6ghz_oper(sdata, he_oper, chandef)) ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT | IEEE80211_STA_DISABLE_HE; else ret = 0; vht_chandef = *chandef; goto out; } memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap)); ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); if (!ht_oper || !sta_ht_cap.ht_supported) { ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT | IEEE80211_STA_DISABLE_HE; goto out; } chandef->width = NL80211_CHAN_WIDTH_20; ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, channel->band); /* check that channel matches the right operating channel */ if (!tracking && channel->center_freq != ht_cfreq) { /* * It's possible that some APs are confused here; * Netgear WNDR3700 sometimes reports 4 higher than * the actual channel in association responses, but * since we look at probe response/beacon data here * it should be OK. */ sdata_info(sdata, "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", channel->center_freq, ht_cfreq, ht_oper->primary_chan, channel->band); ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT | IEEE80211_STA_DISABLE_HE; goto out; } /* check 40 MHz support, if we have it */ if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { ieee80211_chandef_ht_oper(ht_oper, chandef); } else { /* 40 MHz (and 80 MHz) must be supported for VHT */ ret = IEEE80211_STA_DISABLE_VHT; /* also mark 40 MHz disabled */ ret |= IEEE80211_STA_DISABLE_40MHZ; goto out; } if (!vht_oper || !sband->vht_cap.vht_supported) { ret = IEEE80211_STA_DISABLE_VHT; goto out; } vht_chandef = *chandef; if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && he_oper && (le32_to_cpu(he_oper->he_oper_params) & IEEE80211_HE_OPERATION_VHT_OPER_INFO)) { struct ieee80211_vht_operation he_oper_vht_cap; /* * Set only first 3 bytes (other 2 aren't used in * ieee80211_chandef_vht_oper() anyway) */ memcpy(&he_oper_vht_cap, he_oper->optional, 3); he_oper_vht_cap.basic_mcs_set = cpu_to_le16(0); if (!ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info, &he_oper_vht_cap, ht_oper, &vht_chandef)) { if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) sdata_info(sdata, "HE AP VHT information is invalid, disable HE\n"); ret = IEEE80211_STA_DISABLE_HE; goto out; } } else if (!ieee80211_chandef_vht_oper(&sdata->local->hw, vht_cap_info, vht_oper, ht_oper, &vht_chandef)) { if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) sdata_info(sdata, "AP VHT information is invalid, disable VHT\n"); ret = IEEE80211_STA_DISABLE_VHT; goto out; } if (!cfg80211_chandef_valid(&vht_chandef)) { if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) sdata_info(sdata, "AP VHT information is invalid, disable VHT\n"); ret = IEEE80211_STA_DISABLE_VHT; goto out; } if (cfg80211_chandef_identical(chandef, &vht_chandef)) { ret = 0; goto out; } if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) sdata_info(sdata, "AP VHT information doesn't match HT, disable VHT\n"); ret = IEEE80211_STA_DISABLE_VHT; goto out; } *chandef = vht_chandef; ret = 0; out: /* * When tracking the current AP, don't do any further checks if the * new chandef is identical to the one we're currently using for the * connection. This keeps us from playing ping-pong with regulatory, * without it the following can happen (for example): * - connect to an AP with 80 MHz, world regdom allows 80 MHz * - AP advertises regdom US * - CRDA loads regdom US with 80 MHz prohibited (old database) * - the code below detects an unsupported channel, downgrades, and * we disconnect from the AP in the caller * - disconnect causes CRDA to reload world regdomain and the game * starts anew. * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881) * * It seems possible that there are still scenarios with CSA or real * bandwidth changes where a this could happen, but those cases are * less common and wouldn't completely prevent using the AP. */ if (tracking && cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef)) return ret; /* don't print the message below for VHT mismatch if VHT is disabled */ if (ret & IEEE80211_STA_DISABLE_VHT) vht_chandef = *chandef; /* * Ignore the DISABLED flag when we're already connected and only * tracking the APs beacon for bandwidth changes - otherwise we * might get disconnected here if we connect to an AP, update our * regulatory information based on the AP's country IE and the * information we have is wrong/outdated and disables the channel * that we're actually using for the connection to the AP. */ while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, tracking ? 0 : IEEE80211_CHAN_DISABLED)) { if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT | IEEE80211_STA_DISABLE_HE; break; } ret |= ieee80211_chandef_downgrade(chandef); } if (!he_oper || !cfg80211_chandef_usable(sdata->wdev.wiphy, chandef, IEEE80211_CHAN_NO_HE)) ret |= IEEE80211_STA_DISABLE_HE; if (chandef->width != vht_chandef.width && !tracking) sdata_info(sdata, "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); return ret; } static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, const struct ieee80211_ht_cap *ht_cap, const struct ieee80211_vht_cap *vht_cap, const struct ieee80211_ht_operation *ht_oper, const struct ieee80211_vht_operation *vht_oper, const struct ieee80211_he_operation *he_oper, const u8 *bssid, u32 *changed) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_channel *chan = sdata->vif.bss_conf.chandef.chan; struct ieee80211_supported_band *sband = local->hw.wiphy->bands[chan->band]; struct cfg80211_chan_def chandef; u16 ht_opmode; u32 flags; enum ieee80211_sta_rx_bandwidth new_sta_bw; u32 vht_cap_info = 0; int ret; /* if HT was/is disabled, don't track any bandwidth changes */ if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper) return 0; /* don't check VHT if we associated as non-VHT station */ if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) vht_oper = NULL; /* don't check HE if we associated as non-HE station */ if (ifmgd->flags & IEEE80211_STA_DISABLE_HE || !ieee80211_get_he_sta_cap(sband)) he_oper = NULL; if (WARN_ON_ONCE(!sta)) return -EINVAL; /* * if bss configuration changed store the new one - * this may be applicable even if channel is identical */ ht_opmode = le16_to_cpu(ht_oper->operation_mode); if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) { *changed |= BSS_CHANGED_HT; sdata->vif.bss_conf.ht_operation_mode = ht_opmode; } if (vht_cap) vht_cap_info = le32_to_cpu(vht_cap->vht_cap_info); /* calculate new channel (type) based on HT/VHT/HE operation IEs */ flags = ieee80211_determine_chantype(sdata, sband, chan, vht_cap_info, ht_oper, vht_oper, he_oper, &chandef, true); /* * Downgrade the new channel if we associated with restricted * capabilities. For example, if we associated as a 20 MHz STA * to a 40 MHz AP (due to regulatory, capabilities or config * reasons) then switching to a 40 MHz channel now won't do us * any good -- we couldn't use it with the AP. */ if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ && chandef.width == NL80211_CHAN_WIDTH_80P80) flags |= ieee80211_chandef_downgrade(&chandef); if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ && chandef.width == NL80211_CHAN_WIDTH_160) flags |= ieee80211_chandef_downgrade(&chandef); if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ && chandef.width > NL80211_CHAN_WIDTH_20) flags |= ieee80211_chandef_downgrade(&chandef); if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef)) return 0; sdata_info(sdata, "AP %pM changed bandwidth, new config is %d.%03d MHz, " "width %d (%d.%03d/%d MHz)\n", ifmgd->bssid, chandef.chan->center_freq, chandef.chan->freq_offset, chandef.width, chandef.center_freq1, chandef.freq1_offset, chandef.center_freq2); if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT | IEEE80211_STA_DISABLE_HE | IEEE80211_STA_DISABLE_40MHZ | IEEE80211_STA_DISABLE_80P80MHZ | IEEE80211_STA_DISABLE_160MHZ)) || !cfg80211_chandef_valid(&chandef)) { sdata_info(sdata, "AP %pM changed bandwidth in a way we can't support - disconnect\n", ifmgd->bssid); return -EINVAL; } switch (chandef.width) { case NL80211_CHAN_WIDTH_20_NOHT: case NL80211_CHAN_WIDTH_20: new_sta_bw = IEEE80211_STA_RX_BW_20; break; case NL80211_CHAN_WIDTH_40: new_sta_bw = IEEE80211_STA_RX_BW_40; break; case NL80211_CHAN_WIDTH_80: new_sta_bw = IEEE80211_STA_RX_BW_80; break; case NL80211_CHAN_WIDTH_80P80: case NL80211_CHAN_WIDTH_160: new_sta_bw = IEEE80211_STA_RX_BW_160; break; default: return -EINVAL; } if (new_sta_bw > sta->cur_max_bandwidth) new_sta_bw = sta->cur_max_bandwidth; if (new_sta_bw < sta->sta.bandwidth) { sta->sta.bandwidth = new_sta_bw; rate_control_rate_update(local, sband, sta, IEEE80211_RC_BW_CHANGED); } ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed); if (ret) { sdata_info(sdata, "AP %pM changed bandwidth to incompatible one - disconnect\n", ifmgd->bssid); return ret; } if (new_sta_bw > sta->sta.bandwidth) { sta->sta.bandwidth = new_sta_bw; rate_control_rate_update(local, sband, sta, IEEE80211_RC_BW_CHANGED); } return 0; } /* frame sending functions */ static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, u8 ap_ht_param, struct ieee80211_supported_band *sband, struct ieee80211_channel *channel, enum ieee80211_smps_mode smps) { u8 *pos; u32 flags = channel->flags; u16 cap; struct ieee80211_sta_ht_cap ht_cap; BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap)); memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap)); ieee80211_apply_htcap_overrides(sdata, &ht_cap); /* determine capability flags */ cap = ht_cap.cap; switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: if (flags & IEEE80211_CHAN_NO_HT40PLUS) { cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; cap &= ~IEEE80211_HT_CAP_SGI_40; } break; case IEEE80211_HT_PARAM_CHA_SEC_BELOW: if (flags & IEEE80211_CHAN_NO_HT40MINUS) { cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; cap &= ~IEEE80211_HT_CAP_SGI_40; } break; } /* * If 40 MHz was disabled associate as though we weren't * capable of 40 MHz -- some broken APs will never fall * back to trying to transmit in 20 MHz. */ if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) { cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; cap &= ~IEEE80211_HT_CAP_SGI_40; } /* set SM PS mode properly */ cap &= ~IEEE80211_HT_CAP_SM_PS; switch (smps) { case IEEE80211_SMPS_AUTOMATIC: case IEEE80211_SMPS_NUM_MODES: WARN_ON(1); fallthrough; case IEEE80211_SMPS_OFF: cap |= WLAN_HT_CAP_SM_PS_DISABLED << IEEE80211_HT_CAP_SM_PS_SHIFT; break; case IEEE80211_SMPS_STATIC: cap |= WLAN_HT_CAP_SM_PS_STATIC << IEEE80211_HT_CAP_SM_PS_SHIFT; break; case IEEE80211_SMPS_DYNAMIC: cap |= WLAN_HT_CAP_SM_PS_DYNAMIC << IEEE80211_HT_CAP_SM_PS_SHIFT; break; } /* reserve and fill IE */ pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2); ieee80211_ie_build_ht_cap(pos, &ht_cap, cap); } /* This function determines vht capability flags for the association * and builds the IE. * Note - the function may set the owner of the MU-MIMO capability */ static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, struct ieee80211_supported_band *sband, struct ieee80211_vht_cap *ap_vht_cap) { struct ieee80211_local *local = sdata->local; u8 *pos; u32 cap; struct ieee80211_sta_vht_cap vht_cap; u32 mask, ap_bf_sts, our_bf_sts; BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap)); memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap)); ieee80211_apply_vhtcap_overrides(sdata, &vht_cap); /* determine capability flags */ cap = vht_cap.cap; if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) { u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ || bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; } if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) { cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160; cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK; } /* * Some APs apparently get confused if our capabilities are better * than theirs, so restrict what we advertise in the assoc request. */ if (!(ap_vht_cap->vht_cap_info & cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE))) cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE); else if (!(ap_vht_cap->vht_cap_info & cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE))) cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; /* * If some other vif is using the MU-MIMO capablity we cannot associate * using MU-MIMO - this will lead to contradictions in the group-id * mechanism. * Ownership is defined since association request, in order to avoid * simultaneous associations with MU-MIMO. */ if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) { bool disable_mu_mimo = false; struct ieee80211_sub_if_data *other; list_for_each_entry_rcu(other, &local->interfaces, list) { if (other->vif.mu_mimo_owner) { disable_mu_mimo = true; break; } } if (disable_mu_mimo) cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE; else sdata->vif.mu_mimo_owner = true; } mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask; our_bf_sts = cap & mask; if (ap_bf_sts < our_bf_sts) { cap &= ~mask; cap |= ap_bf_sts; } /* reserve and fill IE */ pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2); ieee80211_ie_build_vht_cap(pos, &vht_cap, cap); } /* This function determines HE capability flags for the association * and builds the IE. */ static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, struct ieee80211_supported_band *sband) { u8 *pos; const struct ieee80211_sta_he_cap *he_cap = NULL; struct ieee80211_chanctx_conf *chanctx_conf; u8 he_cap_size; bool reg_cap = false; rcu_read_lock(); chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (!WARN_ON_ONCE(!chanctx_conf)) reg_cap = cfg80211_chandef_usable(sdata->wdev.wiphy, &chanctx_conf->def, IEEE80211_CHAN_NO_HE); rcu_read_unlock(); he_cap = ieee80211_get_he_sta_cap(sband); if (!he_cap || !reg_cap) return; /* * TODO: the 1 added is because this temporarily is under the EXTENSION * IE. Get rid of it when it moves. */ he_cap_size = 2 + 1 + sizeof(he_cap->he_cap_elem) + ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem) + ieee80211_he_ppe_size(he_cap->ppe_thres[0], he_cap->he_cap_elem.phy_cap_info); pos = skb_put(skb, he_cap_size); ieee80211_ie_build_he_cap(pos, he_cap, pos + he_cap_size); ieee80211_ie_build_he_6ghz_cap(sdata, skb); } static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; struct sk_buff *skb; struct ieee80211_mgmt *mgmt; u8 *pos, qos_info, *ie_start; size_t offset = 0, noffset; int i, count, rates_len, supp_rates_len, shift; u16 capab; struct ieee80211_supported_band *sband; struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; u32 rates = 0; struct element *ext_capa = NULL; /* we know it's writable, cast away the const */ if (assoc_data->ie_len) ext_capa = (void *)cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY, assoc_data->ie, assoc_data->ie_len); sdata_assert_lock(sdata); rcu_read_lock(); chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (WARN_ON(!chanctx_conf)) { rcu_read_unlock(); return; } chan = chanctx_conf->def.chan; rcu_read_unlock(); sband = local->hw.wiphy->bands[chan->band]; shift = ieee80211_vif_get_shift(&sdata->vif); if (assoc_data->supp_rates_len) { /* * Get all rates supported by the device and the AP as * some APs don't like getting a superset of their rates * in the association request (e.g. D-Link DAP 1353 in * b-only mode)... */ rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband, assoc_data->supp_rates, assoc_data->supp_rates_len, &rates); } else { /* * In case AP not provide any supported rates information * before association, we send information element(s) with * all rates that we support. */ rates_len = 0; for (i = 0; i < sband->n_bitrates; i++) { rates |= BIT(i); rates_len++; } } skb = alloc_skb(local->hw.extra_tx_headroom + sizeof(*mgmt) + /* bit too much but doesn't matter */ 2 + assoc_data->ssid_len + /* SSID */ 4 + rates_len + /* (extended) rates */ 4 + /* power capability */ 2 + 2 * sband->n_channels + /* supported channels */ 2 + sizeof(struct ieee80211_ht_cap) + /* HT */ 2 + sizeof(struct ieee80211_vht_cap) + /* VHT */ 2 + 1 + sizeof(struct ieee80211_he_cap_elem) + /* HE */ sizeof(struct ieee80211_he_mcs_nss_supp) + IEEE80211_HE_PPE_THRES_MAX_LEN + 2 + 1 + sizeof(struct ieee80211_he_6ghz_capa) + assoc_data->ie_len + /* extra IEs */ (assoc_data->fils_kek_len ? 16 /* AES-SIV */ : 0) + 9, /* WMM */ GFP_KERNEL); if (!skb) return; skb_reserve(skb, local->hw.extra_tx_headroom); capab = WLAN_CAPABILITY_ESS; if (sband->band == NL80211_BAND_2GHZ) { capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME; capab |= WLAN_CAPABILITY_SHORT_PREAMBLE; } if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY) capab |= WLAN_CAPABILITY_PRIVACY; if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) && ieee80211_hw_check(&local->hw, SPECTRUM_MGMT)) capab |= WLAN_CAPABILITY_SPECTRUM_MGMT; if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM) capab |= WLAN_CAPABILITY_RADIO_MEASURE; mgmt = skb_put_zero(skb, 24); memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN); memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN); if (!is_zero_ether_addr(assoc_data->prev_bssid)) { skb_put(skb, 10); mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_REASSOC_REQ); mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab); mgmt->u.reassoc_req.listen_interval = cpu_to_le16(local->hw.conf.listen_interval); memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid, ETH_ALEN); } else { skb_put(skb, 4); mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_ASSOC_REQ); mgmt->u.assoc_req.capab_info = cpu_to_le16(capab); mgmt->u.assoc_req.listen_interval = cpu_to_le16(local->hw.conf.listen_interval); } /* SSID */ pos = skb_put(skb, 2 + assoc_data->ssid_len); ie_start = pos; *pos++ = WLAN_EID_SSID; *pos++ = assoc_data->ssid_len; memcpy(pos, assoc_data->ssid, assoc_data->ssid_len); /* add all rates which were marked to be used above */ supp_rates_len = rates_len; if (supp_rates_len > 8) supp_rates_len = 8; pos = skb_put(skb, supp_rates_len + 2); *pos++ = WLAN_EID_SUPP_RATES; *pos++ = supp_rates_len; count = 0; for (i = 0; i < sband->n_bitrates; i++) { if (BIT(i) & rates) { int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate, 5 * (1 << shift)); *pos++ = (u8) rate; if (++count == 8) break; } } if (rates_len > count) { pos = skb_put(skb, rates_len - count + 2); *pos++ = WLAN_EID_EXT_SUPP_RATES; *pos++ = rates_len - count; for (i++; i < sband->n_bitrates; i++) { if (BIT(i) & rates) { int rate; rate = DIV_ROUND_UP(sband->bitrates[i].bitrate, 5 * (1 << shift)); *pos++ = (u8) rate; } } } if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT || capab & WLAN_CAPABILITY_RADIO_MEASURE) { pos = skb_put(skb, 4); *pos++ = WLAN_EID_PWR_CAPABILITY; *pos++ = 2; *pos++ = 0; /* min tx power */ /* max tx power */ *pos++ = ieee80211_chandef_max_power(&chanctx_conf->def); } /* * Per spec, we shouldn't include the list of channels if we advertise * support for extended channel switching, but we've always done that; * (for now?) apply this restriction only on the (new) 6 GHz band. */ if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT && (sband->band != NL80211_BAND_6GHZ || !ext_capa || ext_capa->datalen < 1 || !(ext_capa->data[0] & WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING))) { /* TODO: get this in reg domain format */ pos = skb_put(skb, 2 * sband->n_channels + 2); *pos++ = WLAN_EID_SUPPORTED_CHANNELS; *pos++ = 2 * sband->n_channels; for (i = 0; i < sband->n_channels; i++) { *pos++ = ieee80211_frequency_to_channel( sband->channels[i].center_freq); *pos++ = 1; /* one channel in the subband*/ } } /* Set MBSSID support for HE AP if needed */ if (ieee80211_hw_check(&local->hw, SUPPORTS_ONLY_HE_MULTI_BSSID) && !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && assoc_data->ie_len && ext_capa && ext_capa->datalen >= 3) ext_capa->data[2] |= WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT; /* if present, add any custom IEs that go before HT */ if (assoc_data->ie_len) { static const u8 before_ht[] = { WLAN_EID_SSID, WLAN_EID_SUPP_RATES, WLAN_EID_EXT_SUPP_RATES, WLAN_EID_PWR_CAPABILITY, WLAN_EID_SUPPORTED_CHANNELS, WLAN_EID_RSN, WLAN_EID_QOS_CAPA, WLAN_EID_RRM_ENABLED_CAPABILITIES, WLAN_EID_MOBILITY_DOMAIN, WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */ WLAN_EID_RIC_DATA, /* reassoc only */ WLAN_EID_SUPPORTED_REGULATORY_CLASSES, }; static const u8 after_ric[] = { WLAN_EID_SUPPORTED_REGULATORY_CLASSES, WLAN_EID_HT_CAPABILITY, WLAN_EID_BSS_COEX_2040, /* luckily this is almost always there */ WLAN_EID_EXT_CAPABILITY, WLAN_EID_QOS_TRAFFIC_CAPA, WLAN_EID_TIM_BCAST_REQ, WLAN_EID_INTERWORKING, /* 60 GHz (Multi-band, DMG, MMS) can't happen */ WLAN_EID_VHT_CAPABILITY, WLAN_EID_OPMODE_NOTIF, }; noffset = ieee80211_ie_split_ric(assoc_data->ie, assoc_data->ie_len, before_ht, ARRAY_SIZE(before_ht), after_ric, ARRAY_SIZE(after_ric), offset); skb_put_data(skb, assoc_data->ie + offset, noffset - offset); offset = noffset; } if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))) ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; if (sband->band != NL80211_BAND_6GHZ && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param, sband, chan, sdata->smps_mode); /* if present, add any custom IEs that go before VHT */ if (assoc_data->ie_len) { static const u8 before_vht[] = { /* * no need to list the ones split off before HT * or generated here */ WLAN_EID_BSS_COEX_2040, WLAN_EID_EXT_CAPABILITY, WLAN_EID_QOS_TRAFFIC_CAPA, WLAN_EID_TIM_BCAST_REQ, WLAN_EID_INTERWORKING, /* 60 GHz (Multi-band, DMG, MMS) can't happen */ }; /* RIC already taken above, so no need to handle here anymore */ noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len, before_vht, ARRAY_SIZE(before_vht), offset); skb_put_data(skb, assoc_data->ie + offset, noffset - offset); offset = noffset; } /* if present, add any custom IEs that go before HE */ if (assoc_data->ie_len) { static const u8 before_he[] = { /* * no need to list the ones split off before VHT * or generated here */ WLAN_EID_OPMODE_NOTIF, WLAN_EID_EXTENSION, WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE, /* 11ai elements */ WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_SESSION, WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_PUBLIC_KEY, WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_KEY_CONFIRM, WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_HLP_CONTAINER, WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN, /* TODO: add 11ah/11aj/11ak elements */ }; /* RIC already taken above, so no need to handle here anymore */ noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len, before_he, ARRAY_SIZE(before_he), offset); pos = skb_put(skb, noffset - offset); memcpy(pos, assoc_data->ie + offset, noffset - offset); offset = noffset; } if (sband->band != NL80211_BAND_6GHZ && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) ieee80211_add_vht_ie(sdata, skb, sband, &assoc_data->ap_vht_cap); /* * If AP doesn't support HT, mark HE as disabled. * If on the 5GHz band, make sure it supports VHT. */ if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || (sband->band == NL80211_BAND_5GHZ && ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) ifmgd->flags |= IEEE80211_STA_DISABLE_HE; if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) ieee80211_add_he_ie(sdata, skb, sband); /* if present, add any custom non-vendor IEs that go after HE */ if (assoc_data->ie_len) { noffset = ieee80211_ie_split_vendor(assoc_data->ie, assoc_data->ie_len, offset); skb_put_data(skb, assoc_data->ie + offset, noffset - offset); offset = noffset; } if (assoc_data->wmm) { if (assoc_data->uapsd) { qos_info = ifmgd->uapsd_queues; qos_info |= (ifmgd->uapsd_max_sp_len << IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT); } else { qos_info = 0; } pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info); } /* add any remaining custom (i.e. vendor specific here) IEs */ if (assoc_data->ie_len) { noffset = assoc_data->ie_len; skb_put_data(skb, assoc_data->ie + offset, noffset - offset); } if (assoc_data->fils_kek_len && fils_encrypt_assoc_req(skb, assoc_data) < 0) { dev_kfree_skb(skb); return; } pos = skb_tail_pointer(skb); kfree(ifmgd->assoc_req_ies); ifmgd->assoc_req_ies = kmemdup(ie_start, pos - ie_start, GFP_ATOMIC); ifmgd->assoc_req_ies_len = pos - ie_start; drv_mgd_prepare_tx(local, sdata, 0); IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS | IEEE80211_TX_INTFL_MLME_CONN_TX; ieee80211_tx_skb(sdata, skb); } void ieee80211_send_pspoll(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata) { struct ieee80211_pspoll *pspoll; struct sk_buff *skb; skb = ieee80211_pspoll_get(&local->hw, &sdata->vif); if (!skb) return; pspoll = (struct ieee80211_pspoll *) skb->data; pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; ieee80211_tx_skb(sdata, skb); } void ieee80211_send_nullfunc(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata, bool powersave) { struct sk_buff *skb; struct ieee80211_hdr_3addr *nullfunc; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; /* Don't send NDPs when STA is connected HE */ if (sdata->vif.type == NL80211_IFTYPE_STATION && !(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) return; skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif, !ieee80211_hw_check(&local->hw, DOESNT_SUPPORT_QOS_NDP)); if (!skb) return; nullfunc = (struct ieee80211_hdr_3addr *) skb->data; if (powersave) nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | IEEE80211_TX_INTFL_OFFCHAN_TX_OK; if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE; ieee80211_tx_skb(sdata, skb); } static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata) { struct sk_buff *skb; struct ieee80211_hdr *nullfunc; __le16 fc; if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) return; /* Don't send NDPs when connected HE */ if (!(sdata->u.mgd.flags & IEEE80211_STA_DISABLE_HE)) return; skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30); if (!skb) return; skb_reserve(skb, local->hw.extra_tx_headroom); nullfunc = skb_put_zero(skb, 30); fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC | IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); nullfunc->frame_control = fc; memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN); memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN); memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN); memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN); IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; ieee80211_tx_skb(sdata, skb); } /* spectrum management related things */ static void ieee80211_chswitch_work(struct work_struct *work) { struct ieee80211_sub_if_data *sdata = container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work); struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; int ret; if (!ieee80211_sdata_running(sdata)) return; sdata_lock(sdata); mutex_lock(&local->mtx); mutex_lock(&local->chanctx_mtx); if (!ifmgd->associated) goto out; if (!sdata->vif.csa_active) goto out; /* * using reservation isn't immediate as it may be deferred until later * with multi-vif. once reservation is complete it will re-schedule the * work with no reserved_chanctx so verify chandef to check if it * completed successfully */ if (sdata->reserved_chanctx) { struct ieee80211_supported_band *sband = NULL; struct sta_info *mgd_sta = NULL; enum ieee80211_sta_rx_bandwidth bw = IEEE80211_STA_RX_BW_20; /* * with multi-vif csa driver may call ieee80211_csa_finish() * many times while waiting for other interfaces to use their * reservations */ if (sdata->reserved_ready) goto out; if (sdata->vif.bss_conf.chandef.width != sdata->csa_chandef.width) { /* * For managed interface, we need to also update the AP * station bandwidth and align the rate scale algorithm * on the bandwidth change. Here we only consider the * bandwidth of the new channel definition (as channel * switch flow does not have the full HT/VHT/HE * information), assuming that if additional changes are * required they would be done as part of the processing * of the next beacon from the AP. */ switch (sdata->csa_chandef.width) { case NL80211_CHAN_WIDTH_20_NOHT: case NL80211_CHAN_WIDTH_20: default: bw = IEEE80211_STA_RX_BW_20; break; case NL80211_CHAN_WIDTH_40: bw = IEEE80211_STA_RX_BW_40; break; case NL80211_CHAN_WIDTH_80: bw = IEEE80211_STA_RX_BW_80; break; case NL80211_CHAN_WIDTH_80P80: case NL80211_CHAN_WIDTH_160: bw = IEEE80211_STA_RX_BW_160; break; } mgd_sta = sta_info_get(sdata, ifmgd->bssid); sband = local->hw.wiphy->bands[sdata->csa_chandef.chan->band]; } if (sdata->vif.bss_conf.chandef.width > sdata->csa_chandef.width) { mgd_sta->sta.bandwidth = bw; rate_control_rate_update(local, sband, mgd_sta, IEEE80211_RC_BW_CHANGED); } ret = ieee80211_vif_use_reserved_context(sdata); if (ret) { sdata_info(sdata, "failed to use reserved channel context, disconnecting (err=%d)\n", ret); ieee80211_queue_work(&sdata->local->hw, &ifmgd->csa_connection_drop_work); goto out; } if (sdata->vif.bss_conf.chandef.width < sdata->csa_chandef.width) { mgd_sta->sta.bandwidth = bw; rate_control_rate_update(local, sband, mgd_sta, IEEE80211_RC_BW_CHANGED); } goto out; } if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef, &sdata->csa_chandef)) { sdata_info(sdata, "failed to finalize channel switch, disconnecting\n"); ieee80211_queue_work(&sdata->local->hw, &ifmgd->csa_connection_drop_work); goto out; } ifmgd->csa_waiting_bcn = true; ieee80211_sta_reset_beacon_monitor(sdata); ieee80211_sta_reset_conn_monitor(sdata); out: mutex_unlock(&local->chanctx_mtx); mutex_unlock(&local->mtx); sdata_unlock(sdata); } static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; int ret; sdata_assert_lock(sdata); WARN_ON(!sdata->vif.csa_active); if (sdata->csa_block_tx) { ieee80211_wake_vif_queues(local, sdata, IEEE80211_QUEUE_STOP_REASON_CSA); sdata->csa_block_tx = false; } sdata->vif.csa_active = false; ifmgd->csa_waiting_bcn = false; ret = drv_post_channel_switch(sdata); if (ret) { sdata_info(sdata, "driver post channel switch failed, disconnecting\n"); ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work); return; } cfg80211_ch_switch_notify(sdata->dev, &sdata->reserved_chandef); } void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success) { struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; trace_api_chswitch_done(sdata, success); if (!success) { sdata_info(sdata, "driver channel switch failed, disconnecting\n"); ieee80211_queue_work(&sdata->local->hw, &ifmgd->csa_connection_drop_work); } else { ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work); } } EXPORT_SYMBOL(ieee80211_chswitch_done); static void ieee80211_chswitch_timer(struct timer_list *t) { struct ieee80211_sub_if_data *sdata = from_timer(sdata, t, u.mgd.chswitch_timer); ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work); } static void ieee80211_sta_abort_chanswitch(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; if (!local->ops->abort_channel_switch) return; mutex_lock(&local->mtx); mutex_lock(&local->chanctx_mtx); ieee80211_vif_unreserve_chanctx(sdata); mutex_unlock(&local->chanctx_mtx); if (sdata->csa_block_tx) ieee80211_wake_vif_queues(local, sdata, IEEE80211_QUEUE_STOP_REASON_CSA); sdata->csa_block_tx = false; sdata->vif.csa_active = false; mutex_unlock(&local->mtx); drv_abort_channel_switch(sdata); } static void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, u64 timestamp, u32 device_timestamp, struct ieee802_11_elems *elems, bool beacon) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct cfg80211_bss *cbss = ifmgd->associated; struct ieee80211_chanctx_conf *conf; struct ieee80211_chanctx *chanctx; enum nl80211_band current_band; struct ieee80211_csa_ie csa_ie; struct ieee80211_channel_switch ch_switch; struct ieee80211_bss *bss; int res; sdata_assert_lock(sdata); if (!cbss) return; if (local->scanning) return; current_band = cbss->channel->band; bss = (void *)cbss->priv; res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band, bss->vht_cap_info, ifmgd->flags, ifmgd->associated->bssid, &csa_ie); if (!res) { ch_switch.timestamp = timestamp; ch_switch.device_timestamp = device_timestamp; ch_switch.block_tx = csa_ie.mode; ch_switch.chandef = csa_ie.chandef; ch_switch.count = csa_ie.count; ch_switch.delay = csa_ie.max_switch_time; } if (res < 0) { ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work); return; } if (beacon && sdata->vif.csa_active && !ifmgd->csa_waiting_bcn) { if (res) ieee80211_sta_abort_chanswitch(sdata); else drv_channel_switch_rx_beacon(sdata, &ch_switch); return; } else if (sdata->vif.csa_active || res) { /* disregard subsequent announcements if already processing */ return; } if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef, IEEE80211_CHAN_DISABLED)) { sdata_info(sdata, "AP %pM switches to unsupported channel " "(%d.%03d MHz, width:%d, CF1/2: %d.%03d/%d MHz), " "disconnecting\n", ifmgd->associated->bssid, csa_ie.chandef.chan->center_freq, csa_ie.chandef.chan->freq_offset, csa_ie.chandef.width, csa_ie.chandef.center_freq1, csa_ie.chandef.freq1_offset, csa_ie.chandef.center_freq2); ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work); return; } if (cfg80211_chandef_identical(&csa_ie.chandef, &sdata->vif.bss_conf.chandef) && (!csa_ie.mode || !beacon)) { if (ifmgd->csa_ignored_same_chan) return; sdata_info(sdata, "AP %pM tries to chanswitch to same channel, ignore\n", ifmgd->associated->bssid); ifmgd->csa_ignored_same_chan = true; return; } /* * Drop all TDLS peers - either we disconnect or move to a different * channel from this point on. There's no telling what our peer will do. * The TDLS WIDER_BW scenario is also problematic, as peers might now * have an incompatible wider chandef. */ ieee80211_teardown_tdls_peers(sdata); mutex_lock(&local->mtx); mutex_lock(&local->chanctx_mtx); conf = rcu_dereference_protected(sdata->vif.chanctx_conf, lockdep_is_held(&local->chanctx_mtx)); if (!conf) { sdata_info(sdata, "no channel context assigned to vif?, disconnecting\n"); goto drop_connection; } chanctx = container_of(conf, struct ieee80211_chanctx, conf); if (local->use_chanctx && !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) { sdata_info(sdata, "driver doesn't support chan-switch with channel contexts\n"); goto drop_connection; } if (drv_pre_channel_switch(sdata, &ch_switch)) { sdata_info(sdata, "preparing for channel switch failed, disconnecting\n"); goto drop_connection; } res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef, chanctx->mode, false); if (res) { sdata_info(sdata, "failed to reserve channel context for channel switch, disconnecting (err=%d)\n", res); goto drop_connection; } mutex_unlock(&local->chanctx_mtx); sdata->vif.csa_active = true; sdata->csa_chandef = csa_ie.chandef; sdata->csa_block_tx = csa_ie.mode; ifmgd->csa_ignored_same_chan = false; if (sdata->csa_block_tx) ieee80211_stop_vif_queues(local, sdata, IEEE80211_QUEUE_STOP_REASON_CSA); mutex_unlock(&local->mtx); cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef, csa_ie.count); if (local->ops->channel_switch) { /* use driver's channel switch callback */ drv_channel_switch(local, sdata, &ch_switch); return; } /* channel switch handled in software */ if (csa_ie.count <= 1) ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work); else mod_timer(&ifmgd->chswitch_timer, TU_TO_EXP_TIME((csa_ie.count - 1) * cbss->beacon_interval)); return; drop_connection: /* * This is just so that the disconnect flow will know that * we were trying to switch channel and failed. In case the * mode is 1 (we are not allowed to Tx), we will know not to * send a deauthentication frame. Those two fields will be * reset when the disconnection worker runs. */ sdata->vif.csa_active = true; sdata->csa_block_tx = csa_ie.mode; ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work); mutex_unlock(&local->chanctx_mtx); mutex_unlock(&local->mtx); } static bool ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata, struct ieee80211_channel *channel, const u8 *country_ie, u8 country_ie_len, const u8 *pwr_constr_elem, int *chan_pwr, int *pwr_reduction) { struct ieee80211_country_ie_triplet *triplet; int chan = ieee80211_frequency_to_channel(channel->center_freq); int i, chan_increment; bool have_chan_pwr = false; /* Invalid IE */ if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN) return false; triplet = (void *)(country_ie + 3); country_ie_len -= 3; switch (channel->band) { default: WARN_ON_ONCE(1); fallthrough; case NL80211_BAND_2GHZ: case NL80211_BAND_60GHZ: chan_increment = 1; break; case NL80211_BAND_5GHZ: case NL80211_BAND_6GHZ: chan_increment = 4; break; } /* find channel */ while (country_ie_len >= 3) { u8 first_channel = triplet->chans.first_channel; if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID) goto next; for (i = 0; i < triplet->chans.num_channels; i++) { if (first_channel + i * chan_increment == chan) { have_chan_pwr = true; *chan_pwr = triplet->chans.max_power; break; } } if (have_chan_pwr) break; next: triplet++; country_ie_len -= 3; } if (have_chan_pwr && pwr_constr_elem) *pwr_reduction = *pwr_constr_elem; else *pwr_reduction = 0; return have_chan_pwr; } static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata, struct ieee80211_channel *channel, const u8 *cisco_dtpc_ie, int *pwr_level) { /* From practical testing, the first data byte of the DTPC element * seems to contain the requested dBm level, and the CLI on Cisco * APs clearly state the range is -127 to 127 dBm, which indicates * a signed byte, although it seemingly never actually goes negative. * The other byte seems to always be zero. */ *pwr_level = (__s8)cisco_dtpc_ie[4]; } static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, struct ieee80211_channel *channel, struct ieee80211_mgmt *mgmt, const u8 *country_ie, u8 country_ie_len, const u8 *pwr_constr_ie, const u8 *cisco_dtpc_ie) { bool has_80211h_pwr = false, has_cisco_pwr = false; int chan_pwr = 0, pwr_reduction_80211h = 0; int pwr_level_cisco, pwr_level_80211h; int new_ap_level; __le16 capab = mgmt->u.probe_resp.capab_info; if (country_ie && (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) || capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) { has_80211h_pwr = ieee80211_find_80211h_pwr_constr( sdata, channel, country_ie, country_ie_len, pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h); pwr_level_80211h = max_t(int, 0, chan_pwr - pwr_reduction_80211h); } if (cisco_dtpc_ie) { ieee80211_find_cisco_dtpc( sdata, channel, cisco_dtpc_ie, &pwr_level_cisco); has_cisco_pwr = true; } if (!has_80211h_pwr && !has_cisco_pwr) return 0; /* If we have both 802.11h and Cisco DTPC, apply both limits * by picking the smallest of the two power levels advertised. */ if (has_80211h_pwr && (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) { new_ap_level = pwr_level_80211h; if (sdata->ap_power_level == new_ap_level) return 0; sdata_dbg(sdata, "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n", pwr_level_80211h, chan_pwr, pwr_reduction_80211h, sdata->u.mgd.bssid); } else { /* has_cisco_pwr is always true here. */ new_ap_level = pwr_level_cisco; if (sdata->ap_power_level == new_ap_level) return 0; sdata_dbg(sdata, "Limiting TX power to %d dBm as advertised by %pM\n", pwr_level_cisco, sdata->u.mgd.bssid); } sdata->ap_power_level = new_ap_level; if (__ieee80211_recalc_txpower(sdata)) return BSS_CHANGED_TXPOWER; return 0; } /* powersave */ static void ieee80211_enable_ps(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata) { struct ieee80211_conf *conf = &local->hw.conf; /* * If we are scanning right now then the parameters will * take effect when scan finishes. */ if (local->scanning) return; if (conf->dynamic_ps_timeout > 0 && !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) { mod_timer(&local->dynamic_ps_timer, jiffies + msecs_to_jiffies(conf->dynamic_ps_timeout)); } else { if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) ieee80211_send_nullfunc(local, sdata, true); if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) return; conf->flags |= IEEE80211_CONF_PS; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); } } static void ieee80211_change_ps(struct ieee80211_local *local) { struct ieee80211_conf *conf = &local->hw.conf; if (local->ps_sdata) { ieee80211_enable_ps(local, local->ps_sdata); } else if (conf->flags & IEEE80211_CONF_PS) { conf->flags &= ~IEEE80211_CONF_PS; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); del_timer_sync(&local->dynamic_ps_timer); cancel_work_sync(&local->dynamic_ps_enable_work); } } static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *mgd = &sdata->u.mgd; struct sta_info *sta = NULL; bool authorized = false; if (!mgd->powersave) return false; if (mgd->broken_ap) return false; if (!mgd->associated) return false; if (mgd->flags & IEEE80211_STA_CONNECTION_POLL) return false; if (!mgd->have_beacon) return false; rcu_read_lock(); sta = sta_info_get(sdata, mgd->bssid); if (sta) authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); rcu_read_unlock(); return authorized; } /* need to hold RTNL or interface lock */ void ieee80211_recalc_ps(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata, *found = NULL; int count = 0; int timeout; if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) { local->ps_sdata = NULL; return; } list_for_each_entry(sdata, &local->interfaces, list) { if (!ieee80211_sdata_running(sdata)) continue; if (sdata->vif.type == NL80211_IFTYPE_AP) { /* If an AP vif is found, then disable PS * by setting the count to zero thereby setting * ps_sdata to NULL. */ count = 0; break; } if (sdata->vif.type != NL80211_IFTYPE_STATION) continue; found = sdata; count++; } if (count == 1 && ieee80211_powersave_allowed(found)) { u8 dtimper = found->u.mgd.dtim_period; timeout = local->dynamic_ps_forced_timeout; if (timeout < 0) timeout = 100; local->hw.conf.dynamic_ps_timeout = timeout; /* If the TIM IE is invalid, pretend the value is 1 */ if (!dtimper) dtimper = 1; local->hw.conf.ps_dtim_period = dtimper; local->ps_sdata = found; } else { local->ps_sdata = NULL; } ieee80211_change_ps(local); } void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata) { bool ps_allowed = ieee80211_powersave_allowed(sdata); if (sdata->vif.bss_conf.ps != ps_allowed) { sdata->vif.bss_conf.ps = ps_allowed; ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS); } } void ieee80211_dynamic_ps_disable_work(struct work_struct *work) { struct ieee80211_local *local = container_of(work, struct ieee80211_local, dynamic_ps_disable_work); if (local->hw.conf.flags & IEEE80211_CONF_PS) { local->hw.conf.flags &= ~IEEE80211_CONF_PS; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); } ieee80211_wake_queues_by_reason(&local->hw, IEEE80211_MAX_QUEUE_MAP, IEEE80211_QUEUE_STOP_REASON_PS, false); } void ieee80211_dynamic_ps_enable_work(struct work_struct *work) { struct ieee80211_local *local = container_of(work, struct ieee80211_local, dynamic_ps_enable_work); struct ieee80211_sub_if_data *sdata = local->ps_sdata; struct ieee80211_if_managed *ifmgd; unsigned long flags; int q; /* can only happen when PS was just disabled anyway */ if (!sdata) return; ifmgd = &sdata->u.mgd; if (local->hw.conf.flags & IEEE80211_CONF_PS) return; if (local->hw.conf.dynamic_ps_timeout > 0) { /* don't enter PS if TX frames are pending */ if (drv_tx_frames_pending(local)) { mod_timer(&local->dynamic_ps_timer, jiffies + msecs_to_jiffies( local->hw.conf.dynamic_ps_timeout)); return; } /* * transmission can be stopped by others which leads to * dynamic_ps_timer expiry. Postpone the ps timer if it * is not the actual idle state. */ spin_lock_irqsave(&local->queue_stop_reason_lock, flags); for (q = 0; q < local->hw.queues; q++) { if (local->queue_stop_reasons[q]) { spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); mod_timer(&local->dynamic_ps_timer, jiffies + msecs_to_jiffies( local->hw.conf.dynamic_ps_timeout)); return; } } spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); } if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { if (drv_tx_frames_pending(local)) { mod_timer(&local->dynamic_ps_timer, jiffies + msecs_to_jiffies( local->hw.conf.dynamic_ps_timeout)); } else { ieee80211_send_nullfunc(local, sdata, true); /* Flush to get the tx status of nullfunc frame */ ieee80211_flush_queues(local, sdata, false); } } if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) && ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) || (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) { ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; local->hw.conf.flags |= IEEE80211_CONF_PS; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); } } void ieee80211_dynamic_ps_timer(struct timer_list *t) { struct ieee80211_local *local = from_timer(local, t, dynamic_ps_timer); ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work); } void ieee80211_dfs_cac_timer_work(struct work_struct *work) { struct delayed_work *delayed_work = to_delayed_work(work); struct ieee80211_sub_if_data *sdata = container_of(delayed_work, struct ieee80211_sub_if_data, dfs_cac_timer_work); struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef; mutex_lock(&sdata->local->mtx); if (sdata->wdev.cac_started) { ieee80211_vif_release_channel(sdata); cfg80211_cac_event(sdata->dev, &chandef, NL80211_RADAR_CAC_FINISHED, GFP_KERNEL); } mutex_unlock(&sdata->local->mtx); } static bool __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; bool ret = false; int ac; if (local->hw.queues < IEEE80211_NUM_ACS) return false; for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac]; int non_acm_ac; unsigned long now = jiffies; if (tx_tspec->action == TX_TSPEC_ACTION_NONE && tx_tspec->admitted_time && time_after(now, tx_tspec->time_slice_start + HZ)) { tx_tspec->consumed_tx_time = 0; tx_tspec->time_slice_start = now; if (tx_tspec->downgraded) tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE; } switch (tx_tspec->action) { case TX_TSPEC_ACTION_STOP_DOWNGRADE: /* take the original parameters */ if (drv_conf_tx(local, sdata, ac, &sdata->tx_conf[ac])) sdata_err(sdata, "failed to set TX queue parameters for queue %d\n", ac); tx_tspec->action = TX_TSPEC_ACTION_NONE; tx_tspec->downgraded = false; ret = true; break; case TX_TSPEC_ACTION_DOWNGRADE: if (time_after(now, tx_tspec->time_slice_start + HZ)) { tx_tspec->action = TX_TSPEC_ACTION_NONE; ret = true; break; } /* downgrade next lower non-ACM AC */ for (non_acm_ac = ac + 1; non_acm_ac < IEEE80211_NUM_ACS; non_acm_ac++) if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac))) break; /* Usually the loop will result in using BK even if it * requires admission control, but such a configuration * makes no sense and we have to transmit somehow - the * AC selection does the same thing. * If we started out trying to downgrade from BK, then * the extra condition here might be needed. */ if (non_acm_ac >= IEEE80211_NUM_ACS) non_acm_ac = IEEE80211_AC_BK; if (drv_conf_tx(local, sdata, ac, &sdata->tx_conf[non_acm_ac])) sdata_err(sdata, "failed to set TX queue parameters for queue %d\n", ac); tx_tspec->action = TX_TSPEC_ACTION_NONE; ret = true; schedule_delayed_work(&ifmgd->tx_tspec_wk, tx_tspec->time_slice_start + HZ - now + 1); break; case TX_TSPEC_ACTION_NONE: /* nothing now */ break; } } return ret; } void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata) { if (__ieee80211_sta_handle_tspec_ac_params(sdata)) ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS); } static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work) { struct ieee80211_sub_if_data *sdata; sdata = container_of(work, struct ieee80211_sub_if_data, u.mgd.tx_tspec_wk.work); ieee80211_sta_handle_tspec_ac_params(sdata); } /* MLME */ static bool ieee80211_sta_wmm_params(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata, const u8 *wmm_param, size_t wmm_param_len, const struct ieee80211_mu_edca_param_set *mu_edca) { struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS]; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; size_t left; int count, mu_edca_count, ac; const u8 *pos; u8 uapsd_queues = 0; if (!local->ops->conf_tx) return false; if (local->hw.queues < IEEE80211_NUM_ACS) return false; if (!wmm_param) return false; if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1) return false; if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED) uapsd_queues = ifmgd->uapsd_queues; count = wmm_param[6] & 0x0f; /* -1 is the initial value of ifmgd->mu_edca_last_param_set. * if mu_edca was preset before and now it disappeared tell * the driver about it. */ mu_edca_count = mu_edca ? mu_edca->mu_qos_info & 0x0f : -1; if (count == ifmgd->wmm_last_param_set && mu_edca_count == ifmgd->mu_edca_last_param_set) return false; ifmgd->wmm_last_param_set = count; ifmgd->mu_edca_last_param_set = mu_edca_count; pos = wmm_param + 8; left = wmm_param_len - 8; memset(¶ms, 0, sizeof(params)); sdata->wmm_acm = 0; for (; left >= 4; left -= 4, pos += 4) { int aci = (pos[0] >> 5) & 0x03; int acm = (pos[0] >> 4) & 0x01; bool uapsd = false; switch (aci) { case 1: /* AC_BK */ ac = IEEE80211_AC_BK; if (acm) sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */ if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK) uapsd = true; params[ac].mu_edca = !!mu_edca; if (mu_edca) params[ac].mu_edca_param_rec = mu_edca->ac_bk; break; case 2: /* AC_VI */ ac = IEEE80211_AC_VI; if (acm) sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */ if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI) uapsd = true; params[ac].mu_edca = !!mu_edca; if (mu_edca) params[ac].mu_edca_param_rec = mu_edca->ac_vi; break; case 3: /* AC_VO */ ac = IEEE80211_AC_VO; if (acm) sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */ if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) uapsd = true; params[ac].mu_edca = !!mu_edca; if (mu_edca) params[ac].mu_edca_param_rec = mu_edca->ac_vo; break; case 0: /* AC_BE */ default: ac = IEEE80211_AC_BE; if (acm) sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */ if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE) uapsd = true; params[ac].mu_edca = !!mu_edca; if (mu_edca) params[ac].mu_edca_param_rec = mu_edca->ac_be; break; } params[ac].aifs = pos[0] & 0x0f; if (params[ac].aifs < 2) { sdata_info(sdata, "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n", params[ac].aifs, aci); params[ac].aifs = 2; } params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4); params[ac].cw_min = ecw2cw(pos[1] & 0x0f); params[ac].txop = get_unaligned_le16(pos + 2); params[ac].acm = acm; params[ac].uapsd = uapsd; if (params[ac].cw_min == 0 || params[ac].cw_min > params[ac].cw_max) { sdata_info(sdata, "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n", params[ac].cw_min, params[ac].cw_max, aci); return false; } ieee80211_regulatory_limit_wmm_params(sdata, ¶ms[ac], ac); } /* WMM specification requires all 4 ACIs. */ for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { if (params[ac].cw_min == 0) { sdata_info(sdata, "AP has invalid WMM params (missing AC %d), using defaults\n", ac); return false; } } for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { mlme_dbg(sdata, "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n", ac, params[ac].acm, params[ac].aifs, params[ac].cw_min, params[ac].cw_max, params[ac].txop, params[ac].uapsd, ifmgd->tx_tspec[ac].downgraded); sdata->tx_conf[ac] = params[ac]; if (!ifmgd->tx_tspec[ac].downgraded && drv_conf_tx(local, sdata, ac, ¶ms[ac])) sdata_err(sdata, "failed to set TX queue parameters for AC %d\n", ac); } /* enable WMM or activate new settings */ sdata->vif.bss_conf.qos = true; return true; } static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) { lockdep_assert_held(&sdata->local->mtx); sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL; ieee80211_run_deferred_scan(sdata->local); } static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata) { mutex_lock(&sdata->local->mtx); __ieee80211_stop_poll(sdata); mutex_unlock(&sdata->local->mtx); } static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata, u16 capab, bool erp_valid, u8 erp) { struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; struct ieee80211_supported_band *sband; u32 changed = 0; bool use_protection; bool use_short_preamble; bool use_short_slot; sband = ieee80211_get_sband(sdata); if (!sband) return changed; if (erp_valid) { use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0; use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0; } else { use_protection = false; use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE); } use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME); if (sband->band == NL80211_BAND_5GHZ || sband->band == NL80211_BAND_6GHZ) use_short_slot = true; if (use_protection != bss_conf->use_cts_prot) { bss_conf->use_cts_prot = use_protection; changed |= BSS_CHANGED_ERP_CTS_PROT; } if (use_short_preamble != bss_conf->use_short_preamble) { bss_conf->use_short_preamble = use_short_preamble; changed |= BSS_CHANGED_ERP_PREAMBLE; } if (use_short_slot != bss_conf->use_short_slot) { bss_conf->use_short_slot = use_short_slot; changed |= BSS_CHANGED_ERP_SLOT; } return changed; } static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, struct cfg80211_bss *cbss, u32 bss_info_changed) { struct ieee80211_bss *bss = (void *)cbss->priv; struct ieee80211_local *local = sdata->local; struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; bss_info_changed |= BSS_CHANGED_ASSOC; bss_info_changed |= ieee80211_handle_bss_capability(sdata, bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value); sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec( beacon_loss_count * bss_conf->beacon_int)); sdata->u.mgd.associated = cbss; memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN); ieee80211_check_rate_mask(sdata); sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE; if (sdata->vif.p2p || sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) { const struct cfg80211_bss_ies *ies; rcu_read_lock(); ies = rcu_dereference(cbss->ies); if (ies) { int ret; ret = cfg80211_get_p2p_attr( ies->data, ies->len, IEEE80211_P2P_ATTR_ABSENCE_NOTICE, (u8 *) &bss_conf->p2p_noa_attr, sizeof(bss_conf->p2p_noa_attr)); if (ret >= 2) { sdata->u.mgd.p2p_noa_index = bss_conf->p2p_noa_attr.index; bss_info_changed |= BSS_CHANGED_P2P_PS; } } rcu_read_unlock(); } /* just to be sure */ ieee80211_stop_poll(sdata); ieee80211_led_assoc(local, 1); if (sdata->u.mgd.have_beacon) { /* * If the AP is buggy we may get here with no DTIM period * known, so assume it's 1 which is the only safe assumption * in that case, although if the TIM IE is broken powersave * probably just won't work at all. */ bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1; bss_conf->beacon_rate = bss->beacon_rate; bss_info_changed |= BSS_CHANGED_BEACON_INFO; } else { bss_conf->beacon_rate = NULL; bss_conf->dtim_period = 0; } bss_conf->assoc = 1; /* Tell the driver to monitor connection quality (if supported) */ if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI && bss_conf->cqm_rssi_thold) bss_info_changed |= BSS_CHANGED_CQM; /* Enable ARP filtering */ if (bss_conf->arp_addr_cnt) bss_info_changed |= BSS_CHANGED_ARP_FILTER; ieee80211_bss_info_change_notify(sdata, bss_info_changed); mutex_lock(&local->iflist_mtx); ieee80211_recalc_ps(local); mutex_unlock(&local->iflist_mtx); ieee80211_recalc_smps(sdata); ieee80211_recalc_ps_vif(sdata); netif_carrier_on(sdata->dev); } static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, u16 stype, u16 reason, bool tx, u8 *frame_buf) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_local *local = sdata->local; u32 changed = 0; sdata_assert_lock(sdata); if (WARN_ON_ONCE(tx && !frame_buf)) return; if (WARN_ON(!ifmgd->associated)) return; ieee80211_stop_poll(sdata); ifmgd->associated = NULL; netif_carrier_off(sdata->dev); /* * if we want to get out of ps before disassoc (why?) we have * to do it before sending disassoc, as otherwise the null-packet * won't be valid. */ if (local->hw.conf.flags & IEEE80211_CONF_PS) { local->hw.conf.flags &= ~IEEE80211_CONF_PS; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); } local->ps_sdata = NULL; /* disable per-vif ps */ ieee80211_recalc_ps_vif(sdata); /* make sure ongoing transmission finishes */ synchronize_net(); /* * drop any frame before deauth/disassoc, this can be data or * management frame. Since we are disconnecting, we should not * insist sending these frames which can take time and delay * the disconnection and possible the roaming. */ if (tx) ieee80211_flush_queues(local, sdata, true); /* deauthenticate/disassociate now */ if (tx || frame_buf) { /* * In multi channel scenarios guarantee that the virtual * interface is granted immediate airtime to transmit the * deauthentication frame by calling mgd_prepare_tx, if the * driver requested so. */ if (ieee80211_hw_check(&local->hw, DEAUTH_NEED_MGD_TX_PREP) && !ifmgd->have_beacon) drv_mgd_prepare_tx(sdata->local, sdata, 0); ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, ifmgd->bssid, stype, reason, tx, frame_buf); } /* flush out frame - make sure the deauth was actually sent */ if (tx) ieee80211_flush_queues(local, sdata, false); /* clear bssid only after building the needed mgmt frames */ eth_zero_addr(ifmgd->bssid); /* remove AP and TDLS peers */ sta_info_flush(sdata); /* finally reset all BSS / config parameters */ changed |= ieee80211_reset_erp_info(sdata); ieee80211_led_assoc(local, 0); changed |= BSS_CHANGED_ASSOC; sdata->vif.bss_conf.assoc = false; ifmgd->p2p_noa_index = -1; memset(&sdata->vif.bss_conf.p2p_noa_attr, 0, sizeof(sdata->vif.bss_conf.p2p_noa_attr)); /* on the next assoc, re-program HT/VHT parameters */ memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa)); memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask)); memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa)); memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask)); /* reset MU-MIMO ownership and group data */ memset(sdata->vif.bss_conf.mu_group.membership, 0, sizeof(sdata->vif.bss_conf.mu_group.membership)); memset(sdata->vif.bss_conf.mu_group.position, 0, sizeof(sdata->vif.bss_conf.mu_group.position)); changed |= BSS_CHANGED_MU_GROUPS; sdata->vif.mu_mimo_owner = false; sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL; del_timer_sync(&local->dynamic_ps_timer); cancel_work_sync(&local->dynamic_ps_enable_work); /* Disable ARP filtering */ if (sdata->vif.bss_conf.arp_addr_cnt) changed |= BSS_CHANGED_ARP_FILTER; sdata->vif.bss_conf.qos = false; changed |= BSS_CHANGED_QOS; /* The BSSID (not really interesting) and HT changed */ changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT; ieee80211_bss_info_change_notify(sdata, changed); /* disassociated - set to defaults now */ ieee80211_set_wmm_default(sdata, false, false); del_timer_sync(&sdata->u.mgd.conn_mon_timer); del_timer_sync(&sdata->u.mgd.bcn_mon_timer); del_timer_sync(&sdata->u.mgd.timer); del_timer_sync(&sdata->u.mgd.chswitch_timer); sdata->vif.bss_conf.dtim_period = 0; sdata->vif.bss_conf.beacon_rate = NULL; ifmgd->have_beacon = false; ifmgd->flags = 0; mutex_lock(&local->mtx); ieee80211_vif_release_channel(sdata); sdata->vif.csa_active = false; ifmgd->csa_waiting_bcn = false; ifmgd->csa_ignored_same_chan = false; if (sdata->csa_block_tx) { ieee80211_wake_vif_queues(local, sdata, IEEE80211_QUEUE_STOP_REASON_CSA); sdata->csa_block_tx = false; } mutex_unlock(&local->mtx); /* existing TX TSPEC sessions no longer exist */ memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec)); cancel_delayed_work_sync(&ifmgd->tx_tspec_wk); sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM; } void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata, struct ieee80211_hdr *hdr) { /* * We can postpone the mgd.timer whenever receiving unicast frames * from AP because we know that the connection is working both ways * at that time. But multicast frames (and hence also beacons) must * be ignored here, because we need to trigger the timer during * data idle periods for sending the periodic probe request to the * AP we're connected to. */ if (is_multicast_ether_addr(hdr->addr1)) return; ieee80211_sta_reset_conn_monitor(sdata); } static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_local *local = sdata->local; mutex_lock(&local->mtx); if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)) goto out; __ieee80211_stop_poll(sdata); mutex_lock(&local->iflist_mtx); ieee80211_recalc_ps(local); mutex_unlock(&local->iflist_mtx); if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) goto out; /* * We've received a probe response, but are not sure whether * we have or will be receiving any beacons or data, so let's * schedule the timers again, just in case. */ ieee80211_sta_reset_beacon_monitor(sdata); mod_timer(&ifmgd->conn_mon_timer, round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME)); out: mutex_unlock(&local->mtx); } static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata, struct ieee80211_hdr *hdr, u16 tx_time) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u16 tid = ieee80211_get_tid(hdr); int ac = ieee80211_ac_from_tid(tid); struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac]; unsigned long now = jiffies; if (likely(!tx_tspec->admitted_time)) return; if (time_after(now, tx_tspec->time_slice_start + HZ)) { tx_tspec->consumed_tx_time = 0; tx_tspec->time_slice_start = now; if (tx_tspec->downgraded) { tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE; schedule_delayed_work(&ifmgd->tx_tspec_wk, 0); } } if (tx_tspec->downgraded) return; tx_tspec->consumed_tx_time += tx_time; if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) { tx_tspec->downgraded = true; tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE; schedule_delayed_work(&ifmgd->tx_tspec_wk, 0); } } void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata, struct ieee80211_hdr *hdr, bool ack, u16 tx_time) { ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time); if (!ieee80211_is_data(hdr->frame_control)) return; if (ieee80211_is_any_nullfunc(hdr->frame_control) && sdata->u.mgd.probe_send_count > 0) { if (ack) ieee80211_sta_reset_conn_monitor(sdata); else sdata->u.mgd.nullfunc_failed = true; ieee80211_queue_work(&sdata->local->hw, &sdata->work); return; } if (ack) ieee80211_sta_reset_conn_monitor(sdata); } static void ieee80211_mlme_send_probe_req(struct ieee80211_sub_if_data *sdata, const u8 *src, const u8 *dst, const u8 *ssid, size_t ssid_len, struct ieee80211_channel *channel) { struct sk_buff *skb; skb = ieee80211_build_probe_req(sdata, src, dst, (u32)-1, channel, ssid, ssid_len, NULL, 0, IEEE80211_PROBE_FLAG_DIRECTED); if (skb) ieee80211_tx_skb(sdata, skb); } static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; const u8 *ssid; u8 *dst = ifmgd->associated->bssid; u8 unicast_limit = max(1, max_probe_tries - 3); struct sta_info *sta; /* * Try sending broadcast probe requests for the last three * probe requests after the first ones failed since some * buggy APs only support broadcast probe requests. */ if (ifmgd->probe_send_count >= unicast_limit) dst = NULL; /* * When the hardware reports an accurate Tx ACK status, it's * better to send a nullfunc frame instead of a probe request, * as it will kick us off the AP quickly if we aren't associated * anymore. The timeout will be reset if the frame is ACKed by * the AP. */ ifmgd->probe_send_count++; if (dst) { mutex_lock(&sdata->local->sta_mtx); sta = sta_info_get(sdata, dst); if (!WARN_ON(!sta)) ieee80211_check_fast_rx(sta); mutex_unlock(&sdata->local->sta_mtx); } if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) { ifmgd->nullfunc_failed = false; if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) ifmgd->probe_send_count--; else ieee80211_send_nullfunc(sdata->local, sdata, false); } else { int ssid_len; rcu_read_lock(); ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID); if (WARN_ON_ONCE(ssid == NULL)) ssid_len = 0; else ssid_len = ssid[1]; ieee80211_mlme_send_probe_req(sdata, sdata->vif.addr, dst, ssid + 2, ssid_len, ifmgd->associated->channel); rcu_read_unlock(); } ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms); run_again(sdata, ifmgd->probe_timeout); } static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, bool beacon) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; bool already = false; if (!ieee80211_sdata_running(sdata)) return; sdata_lock(sdata); if (!ifmgd->associated) goto out; mutex_lock(&sdata->local->mtx); if (sdata->local->tmp_channel || sdata->local->scanning) { mutex_unlock(&sdata->local->mtx); goto out; } if (beacon) { mlme_dbg_ratelimited(sdata, "detected beacon loss from AP (missed %d beacons) - probing\n", beacon_loss_count); ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL); } /* * The driver/our work has already reported this event or the * connection monitoring has kicked in and we have already sent * a probe request. Or maybe the AP died and the driver keeps * reporting until we disassociate... * * In either case we have to ignore the current call to this * function (except for setting the correct probe reason bit) * because otherwise we would reset the timer every time and * never check whether we received a probe response! */ if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) already = true; ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL; mutex_unlock(&sdata->local->mtx); if (already) goto out; mutex_lock(&sdata->local->iflist_mtx); ieee80211_recalc_ps(sdata->local); mutex_unlock(&sdata->local->iflist_mtx); ifmgd->probe_send_count = 0; ieee80211_mgd_probe_ap_send(sdata); out: sdata_unlock(sdata); } struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct cfg80211_bss *cbss; struct sk_buff *skb; const u8 *ssid; int ssid_len; if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION)) return NULL; sdata_assert_lock(sdata); if (ifmgd->associated) cbss = ifmgd->associated; else if (ifmgd->auth_data) cbss = ifmgd->auth_data->bss; else if (ifmgd->assoc_data) cbss = ifmgd->assoc_data->bss; else return NULL; rcu_read_lock(); ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID); if (WARN_ONCE(!ssid || ssid[1] > IEEE80211_MAX_SSID_LEN, "invalid SSID element (len=%d)", ssid ? ssid[1] : -1)) ssid_len = 0; else ssid_len = ssid[1]; skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid, (u32) -1, cbss->channel, ssid + 2, ssid_len, NULL, 0, IEEE80211_PROBE_FLAG_DIRECTED); rcu_read_unlock(); return skb; } EXPORT_SYMBOL(ieee80211_ap_probereq_get); static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata, const u8 *buf, size_t len, bool tx, u16 reason) { struct ieee80211_event event = { .type = MLME_EVENT, .u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT, .u.mlme.reason = reason, }; if (tx) cfg80211_tx_mlme_mgmt(sdata->dev, buf, len); else cfg80211_rx_mlme_mgmt(sdata->dev, buf, len); drv_event_callback(sdata->local, sdata, &event); } static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; bool tx; sdata_lock(sdata); if (!ifmgd->associated) { sdata_unlock(sdata); return; } tx = !sdata->csa_block_tx; /* AP is probably out of range (or not reachable for another reason) so * remove the bss struct for that AP. */ cfg80211_unlink_bss(local->hw.wiphy, ifmgd->associated); ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, tx, frame_buf); mutex_lock(&local->mtx); sdata->vif.csa_active = false; ifmgd->csa_waiting_bcn = false; if (sdata->csa_block_tx) { ieee80211_wake_vif_queues(local, sdata, IEEE80211_QUEUE_STOP_REASON_CSA); sdata->csa_block_tx = false; } mutex_unlock(&local->mtx); ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY); sdata_unlock(sdata); } static void ieee80211_beacon_connection_loss_work(struct work_struct *work) { struct ieee80211_sub_if_data *sdata = container_of(work, struct ieee80211_sub_if_data, u.mgd.beacon_connection_loss_work); struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; if (ifmgd->associated) ifmgd->beacon_loss_count++; if (ifmgd->connection_loss) { sdata_info(sdata, "Connection to AP %pM lost\n", ifmgd->bssid); __ieee80211_disconnect(sdata); } else { ieee80211_mgd_probe_ap(sdata, true); } } static void ieee80211_csa_connection_drop_work(struct work_struct *work) { struct ieee80211_sub_if_data *sdata = container_of(work, struct ieee80211_sub_if_data, u.mgd.csa_connection_drop_work); __ieee80211_disconnect(sdata); } void ieee80211_beacon_loss(struct ieee80211_vif *vif) { struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); struct ieee80211_hw *hw = &sdata->local->hw; trace_api_beacon_loss(sdata); sdata->u.mgd.connection_loss = false; ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); } EXPORT_SYMBOL(ieee80211_beacon_loss); void ieee80211_connection_loss(struct ieee80211_vif *vif) { struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); struct ieee80211_hw *hw = &sdata->local->hw; trace_api_connection_loss(sdata); sdata->u.mgd.connection_loss = true; ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work); } EXPORT_SYMBOL(ieee80211_connection_loss); static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata, bool assoc) { struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; sdata_assert_lock(sdata); if (!assoc) { /* * we are not authenticated yet, the only timer that could be * running is the timeout for the authentication response which * which is not relevant anymore. */ del_timer_sync(&sdata->u.mgd.timer); sta_info_destroy_addr(sdata, auth_data->bss->bssid); eth_zero_addr(sdata->u.mgd.bssid); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); sdata->u.mgd.flags = 0; mutex_lock(&sdata->local->mtx); ieee80211_vif_release_channel(sdata); mutex_unlock(&sdata->local->mtx); } cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss); kfree(auth_data); sdata->u.mgd.auth_data = NULL; } static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata, bool assoc, bool abandon) { struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; sdata_assert_lock(sdata); if (!assoc) { /* * we are not associated yet, the only timer that could be * running is the timeout for the association response which * which is not relevant anymore. */ del_timer_sync(&sdata->u.mgd.timer); sta_info_destroy_addr(sdata, assoc_data->bss->bssid); eth_zero_addr(sdata->u.mgd.bssid); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); sdata->u.mgd.flags = 0; sdata->vif.mu_mimo_owner = false; mutex_lock(&sdata->local->mtx); ieee80211_vif_release_channel(sdata); mutex_unlock(&sdata->local->mtx); if (abandon) cfg80211_abandon_assoc(sdata->dev, assoc_data->bss); } kfree(assoc_data); sdata->u.mgd.assoc_data = NULL; } static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len) { struct ieee80211_local *local = sdata->local; struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data; u8 *pos; struct ieee802_11_elems elems; u32 tx_flags = 0; pos = mgmt->u.auth.variable; ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems, mgmt->bssid, auth_data->bss->bssid); if (!elems.challenge) return; auth_data->expected_transaction = 4; drv_mgd_prepare_tx(sdata->local, sdata, 0); if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | IEEE80211_TX_INTFL_MLME_CONN_TX; ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0, elems.challenge - 2, elems.challenge_len + 2, auth_data->bss->bssid, auth_data->bss->bssid, auth_data->key, auth_data->key_len, auth_data->key_idx, tx_flags); } static bool ieee80211_mark_sta_auth(struct ieee80211_sub_if_data *sdata, const u8 *bssid) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct sta_info *sta; bool result = true; sdata_info(sdata, "authenticated\n"); ifmgd->auth_data->done = true; ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC; ifmgd->auth_data->timeout_started = true; run_again(sdata, ifmgd->auth_data->timeout); /* move station state to auth */ mutex_lock(&sdata->local->sta_mtx); sta = sta_info_get(sdata, bssid); if (!sta) { WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid); result = false; goto out; } if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) { sdata_info(sdata, "failed moving %pM to auth\n", bssid); result = false; goto out; } out: mutex_unlock(&sdata->local->sta_mtx); return result; } static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 bssid[ETH_ALEN]; u16 auth_alg, auth_transaction, status_code; struct ieee80211_event event = { .type = MLME_EVENT, .u.mlme.data = AUTH_EVENT, }; sdata_assert_lock(sdata); if (len < 24 + 6) return; if (!ifmgd->auth_data || ifmgd->auth_data->done) return; memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN); if (!ether_addr_equal(bssid, mgmt->bssid)) return; auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg); auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction); status_code = le16_to_cpu(mgmt->u.auth.status_code); if (auth_alg != ifmgd->auth_data->algorithm || (auth_alg != WLAN_AUTH_SAE && auth_transaction != ifmgd->auth_data->expected_transaction) || (auth_alg == WLAN_AUTH_SAE && (auth_transaction < ifmgd->auth_data->expected_transaction || auth_transaction > 2))) { sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n", mgmt->sa, auth_alg, ifmgd->auth_data->algorithm, auth_transaction, ifmgd->auth_data->expected_transaction); return; } if (status_code != WLAN_STATUS_SUCCESS) { cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); if (auth_alg == WLAN_AUTH_SAE && status_code == WLAN_STATUS_ANTI_CLOG_REQUIRED) return; sdata_info(sdata, "%pM denied authentication (status %d)\n", mgmt->sa, status_code); ieee80211_destroy_auth_data(sdata, false); event.u.mlme.status = MLME_DENIED; event.u.mlme.reason = status_code; drv_event_callback(sdata->local, sdata, &event); return; } switch (ifmgd->auth_data->algorithm) { case WLAN_AUTH_OPEN: case WLAN_AUTH_LEAP: case WLAN_AUTH_FT: case WLAN_AUTH_SAE: case WLAN_AUTH_FILS_SK: case WLAN_AUTH_FILS_SK_PFS: case WLAN_AUTH_FILS_PK: break; case WLAN_AUTH_SHARED_KEY: if (ifmgd->auth_data->expected_transaction != 4) { ieee80211_auth_challenge(sdata, mgmt, len); /* need another frame */ return; } break; default: WARN_ONCE(1, "invalid auth alg %d", ifmgd->auth_data->algorithm); return; } event.u.mlme.status = MLME_SUCCESS; drv_event_callback(sdata->local, sdata, &event); if (ifmgd->auth_data->algorithm != WLAN_AUTH_SAE || (auth_transaction == 2 && ifmgd->auth_data->expected_transaction == 2)) { if (!ieee80211_mark_sta_auth(sdata, bssid)) return; /* ignore frame -- wait for timeout */ } else if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE && auth_transaction == 2) { sdata_info(sdata, "SAE peer confirmed\n"); ifmgd->auth_data->peer_confirmed = true; } cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); } #define case_WLAN(type) \ case WLAN_REASON_##type: return #type const char *ieee80211_get_reason_code_string(u16 reason_code) { switch (reason_code) { case_WLAN(UNSPECIFIED); case_WLAN(PREV_AUTH_NOT_VALID); case_WLAN(DEAUTH_LEAVING); case_WLAN(DISASSOC_DUE_TO_INACTIVITY); case_WLAN(DISASSOC_AP_BUSY); case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA); case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA); case_WLAN(DISASSOC_STA_HAS_LEFT); case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH); case_WLAN(DISASSOC_BAD_POWER); case_WLAN(DISASSOC_BAD_SUPP_CHAN); case_WLAN(INVALID_IE); case_WLAN(MIC_FAILURE); case_WLAN(4WAY_HANDSHAKE_TIMEOUT); case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT); case_WLAN(IE_DIFFERENT); case_WLAN(INVALID_GROUP_CIPHER); case_WLAN(INVALID_PAIRWISE_CIPHER); case_WLAN(INVALID_AKMP); case_WLAN(UNSUPP_RSN_VERSION); case_WLAN(INVALID_RSN_IE_CAP); case_WLAN(IEEE8021X_FAILED); case_WLAN(CIPHER_SUITE_REJECTED); case_WLAN(DISASSOC_UNSPECIFIED_QOS); case_WLAN(DISASSOC_QAP_NO_BANDWIDTH); case_WLAN(DISASSOC_LOW_ACK); case_WLAN(DISASSOC_QAP_EXCEED_TXOP); case_WLAN(QSTA_LEAVE_QBSS); case_WLAN(QSTA_NOT_USE); case_WLAN(QSTA_REQUIRE_SETUP); case_WLAN(QSTA_TIMEOUT); case_WLAN(QSTA_CIPHER_NOT_SUPP); case_WLAN(MESH_PEER_CANCELED); case_WLAN(MESH_MAX_PEERS); case_WLAN(MESH_CONFIG); case_WLAN(MESH_CLOSE); case_WLAN(MESH_MAX_RETRIES); case_WLAN(MESH_CONFIRM_TIMEOUT); case_WLAN(MESH_INVALID_GTK); case_WLAN(MESH_INCONSISTENT_PARAM); case_WLAN(MESH_INVALID_SECURITY); case_WLAN(MESH_PATH_ERROR); case_WLAN(MESH_PATH_NOFORWARD); case_WLAN(MESH_PATH_DEST_UNREACHABLE); case_WLAN(MAC_EXISTS_IN_MBSS); case_WLAN(MESH_CHAN_REGULATORY); case_WLAN(MESH_CHAN); default: return ""; } } static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code); sdata_assert_lock(sdata); if (len < 24 + 2) return; if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) { ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code); return; } if (ifmgd->associated && ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) { const u8 *bssid = ifmgd->associated->bssid; sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n", bssid, reason_code, ieee80211_get_reason_code_string(reason_code)); ieee80211_set_disassoc(sdata, 0, 0, false, NULL); ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code); return; } if (ifmgd->assoc_data && ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) { const u8 *bssid = ifmgd->assoc_data->bss->bssid; sdata_info(sdata, "deauthenticated from %pM while associating (Reason: %u=%s)\n", bssid, reason_code, ieee80211_get_reason_code_string(reason_code)); ieee80211_destroy_assoc_data(sdata, false, true); cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len); return; } } static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u16 reason_code; sdata_assert_lock(sdata); if (len < 24 + 2) return; if (!ifmgd->associated || !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) return; reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code); if (!ether_addr_equal(mgmt->bssid, mgmt->sa)) { ieee80211_tdls_handle_disconnect(sdata, mgmt->sa, reason_code); return; } sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n", mgmt->sa, reason_code, ieee80211_get_reason_code_string(reason_code)); ieee80211_set_disassoc(sdata, 0, 0, false, NULL); ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code); } static void ieee80211_get_rates(struct ieee80211_supported_band *sband, u8 *supp_rates, unsigned int supp_rates_len, u32 *rates, u32 *basic_rates, bool *have_higher_than_11mbit, int *min_rate, int *min_rate_index, int shift) { int i, j; for (i = 0; i < supp_rates_len; i++) { int rate = supp_rates[i] & 0x7f; bool is_basic = !!(supp_rates[i] & 0x80); if ((rate * 5 * (1 << shift)) > 110) *have_higher_than_11mbit = true; /* * Skip HT, VHT and HE BSS membership selectors since they're * not rates. * * Note: Even though the membership selector and the basic * rate flag share the same bit, they are not exactly * the same. */ if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) || supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY) || supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HE_PHY)) continue; for (j = 0; j < sband->n_bitrates; j++) { struct ieee80211_rate *br; int brate; br = &sband->bitrates[j]; brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5); if (brate == rate) { *rates |= BIT(j); if (is_basic) *basic_rates |= BIT(j); if ((rate * 5) < *min_rate) { *min_rate = rate * 5; *min_rate_index = j; } break; } } } } static bool ieee80211_twt_req_supported(const struct sta_info *sta, const struct ieee802_11_elems *elems) { if (elems->ext_capab_len < 10) return false; if (!(elems->ext_capab[9] & WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT)) return false; return sta->sta.he_cap.he_cap_elem.mac_cap_info[0] & IEEE80211_HE_MAC_CAP0_TWT_RES; } static int ieee80211_recalc_twt_req(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, struct ieee802_11_elems *elems) { bool twt = ieee80211_twt_req_supported(sta, elems); if (sdata->vif.bss_conf.twt_requester != twt) { sdata->vif.bss_conf.twt_requester = twt; return BSS_CHANGED_TWT; } return 0; } static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, struct cfg80211_bss *cbss, struct ieee80211_mgmt *mgmt, size_t len, struct ieee802_11_elems *elems) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; struct sta_info *sta; u16 capab_info, aid; struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; const struct cfg80211_bss_ies *bss_ies = NULL; struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ; u32 changed = 0; int err; bool ret; /* AssocResp and ReassocResp have identical structure */ aid = le16_to_cpu(mgmt->u.assoc_resp.aid); capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); /* * The 5 MSB of the AID field are reserved * (802.11-2016 9.4.1.8 AID field) */ aid &= 0x7ff; ifmgd->broken_ap = false; if (aid == 0 || aid > IEEE80211_MAX_AID) { sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n", aid); aid = 0; ifmgd->broken_ap = true; } if (!elems->supp_rates) { sdata_info(sdata, "no SuppRates element in AssocResp\n"); return false; } sdata->vif.bss_conf.aid = aid; ifmgd->tdls_chan_switch_prohibited = elems->ext_capab && elems->ext_capab_len >= 5 && (elems->ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED); /* * Some APs are erroneously not including some information in their * (re)association response frames. Try to recover by using the data * from the beacon or probe response. This seems to afflict mobile * 2G/3G/4G wifi routers, reported models include the "Onda PN51T", * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device. */ if (!is_6ghz && ((assoc_data->wmm && !elems->wmm_param) || (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && (!elems->ht_cap_elem || !elems->ht_operation)) || (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && (!elems->vht_cap_elem || !elems->vht_operation)))) { const struct cfg80211_bss_ies *ies; struct ieee802_11_elems bss_elems; rcu_read_lock(); ies = rcu_dereference(cbss->ies); if (ies) bss_ies = kmemdup(ies, sizeof(*ies) + ies->len, GFP_ATOMIC); rcu_read_unlock(); if (!bss_ies) return false; ieee802_11_parse_elems(bss_ies->data, bss_ies->len, false, &bss_elems, mgmt->bssid, assoc_data->bss->bssid); if (assoc_data->wmm && !elems->wmm_param && bss_elems.wmm_param) { elems->wmm_param = bss_elems.wmm_param; sdata_info(sdata, "AP bug: WMM param missing from AssocResp\n"); } /* * Also check if we requested HT/VHT, otherwise the AP doesn't * have to include the IEs in the (re)association response. */ if (!elems->ht_cap_elem && bss_elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { elems->ht_cap_elem = bss_elems.ht_cap_elem; sdata_info(sdata, "AP bug: HT capability missing from AssocResp\n"); } if (!elems->ht_operation && bss_elems.ht_operation && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { elems->ht_operation = bss_elems.ht_operation; sdata_info(sdata, "AP bug: HT operation missing from AssocResp\n"); } if (!elems->vht_cap_elem && bss_elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) { elems->vht_cap_elem = bss_elems.vht_cap_elem; sdata_info(sdata, "AP bug: VHT capa missing from AssocResp\n"); } if (!elems->vht_operation && bss_elems.vht_operation && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) { elems->vht_operation = bss_elems.vht_operation; sdata_info(sdata, "AP bug: VHT operation missing from AssocResp\n"); } } /* * We previously checked these in the beacon/probe response, so * they should be present here. This is just a safety net. */ if (!is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && (!elems->wmm_param || !elems->ht_cap_elem || !elems->ht_operation)) { sdata_info(sdata, "HT AP is missing WMM params or HT capability/operation\n"); ret = false; goto out; } if (!is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && (!elems->vht_cap_elem || !elems->vht_operation)) { sdata_info(sdata, "VHT AP is missing VHT capability/operation\n"); ret = false; goto out; } if (is_6ghz && !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && !elems->he_6ghz_capa) { sdata_info(sdata, "HE 6 GHz AP is missing HE 6 GHz band capability\n"); ret = false; goto out; } mutex_lock(&sdata->local->sta_mtx); /* * station info was already allocated and inserted before * the association and should be available to us */ sta = sta_info_get(sdata, cbss->bssid); if (WARN_ON(!sta)) { mutex_unlock(&sdata->local->sta_mtx); ret = false; goto out; } sband = ieee80211_get_sband(sdata); if (!sband) { mutex_unlock(&sdata->local->sta_mtx); ret = false; goto out; } if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && (!elems->he_cap || !elems->he_operation)) { mutex_unlock(&sdata->local->sta_mtx); sdata_info(sdata, "HE AP is missing HE capability/operation\n"); ret = false; goto out; } /* Set up internal HT/VHT capabilities */ if (elems->ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, elems->ht_cap_elem, sta); if (elems->vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, elems->vht_cap_elem, sta); if (elems->he_operation && !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && elems->he_cap) { ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband, elems->he_cap, elems->he_cap_len, elems->he_6ghz_capa, sta); bss_conf->he_support = sta->sta.he_cap.has_he; if (elems->rsnx && elems->rsnx_len && (elems->rsnx[0] & WLAN_RSNX_CAPA_PROTECTED_TWT) && wiphy_ext_feature_isset(local->hw.wiphy, NL80211_EXT_FEATURE_PROTECTED_TWT)) bss_conf->twt_protected = true; else bss_conf->twt_protected = false; changed |= ieee80211_recalc_twt_req(sdata, sta, elems); } else { bss_conf->he_support = false; bss_conf->twt_requester = false; bss_conf->twt_protected = false; } if (bss_conf->he_support) { bss_conf->he_bss_color.color = le32_get_bits(elems->he_operation->he_oper_params, IEEE80211_HE_OPERATION_BSS_COLOR_MASK); bss_conf->he_bss_color.partial = le32_get_bits(elems->he_operation->he_oper_params, IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR); bss_conf->he_bss_color.enabled = !le32_get_bits(elems->he_operation->he_oper_params, IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED); if (bss_conf->he_bss_color.enabled) changed |= BSS_CHANGED_HE_BSS_COLOR; bss_conf->htc_trig_based_pkt_ext = le32_get_bits(elems->he_operation->he_oper_params, IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK); bss_conf->frame_time_rts_th = le32_get_bits(elems->he_operation->he_oper_params, IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK); bss_conf->multi_sta_back_32bit = sta->sta.he_cap.he_cap_elem.mac_cap_info[2] & IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP; bss_conf->ack_enabled = sta->sta.he_cap.he_cap_elem.mac_cap_info[2] & IEEE80211_HE_MAC_CAP2_ACK_EN; bss_conf->uora_exists = !!elems->uora_element; if (elems->uora_element) bss_conf->uora_ocw_range = elems->uora_element[0]; ieee80211_he_op_ie_to_bss_conf(&sdata->vif, elems->he_operation); ieee80211_he_spr_ie_to_bss_conf(&sdata->vif, elems->he_spr); /* TODO: OPEN: what happens if BSS color disable is set? */ } if (cbss->transmitted_bss) { bss_conf->nontransmitted = true; ether_addr_copy(bss_conf->transmitter_bssid, cbss->transmitted_bss->bssid); bss_conf->bssid_indicator = cbss->max_bssid_indicator; bss_conf->bssid_index = cbss->bssid_index; } /* * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data * in their association response, so ignore that data for our own * configuration. If it changed since the last beacon, we'll get the * next beacon and update then. */ /* * If an operating mode notification IE is present, override the * NSS calculation (that would be done in rate_control_rate_init()) * and use the # of streams from that element. */ if (elems->opmode_notif && !(*elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) { u8 nss; nss = *elems->opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; nss += 1; sta->sta.rx_nss = nss; } rate_control_rate_init(sta); if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) { set_sta_flag(sta, WLAN_STA_MFP); sta->sta.mfp = true; } else { sta->sta.mfp = false; } sta->sta.wme = elems->wmm_param && local->hw.queues >= IEEE80211_NUM_ACS; err = sta_info_move_state(sta, IEEE80211_STA_ASSOC); if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT)) err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); if (err) { sdata_info(sdata, "failed to move station %pM to desired state\n", sta->sta.addr); WARN_ON(__sta_info_destroy(sta)); mutex_unlock(&sdata->local->sta_mtx); ret = false; goto out; } mutex_unlock(&sdata->local->sta_mtx); /* * Always handle WMM once after association regardless * of the first value the AP uses. Setting -1 here has * that effect because the AP values is an unsigned * 4-bit value. */ ifmgd->wmm_last_param_set = -1; ifmgd->mu_edca_last_param_set = -1; if (ifmgd->flags & IEEE80211_STA_DISABLE_WMM) { ieee80211_set_wmm_default(sdata, false, false); } else if (!ieee80211_sta_wmm_params(local, sdata, elems->wmm_param, elems->wmm_param_len, elems->mu_edca_param_set)) { /* still enable QoS since we might have HT/VHT */ ieee80211_set_wmm_default(sdata, false, true); /* set the disable-WMM flag in this case to disable * tracking WMM parameter changes in the beacon if * the parameters weren't actually valid. Doing so * avoids changing parameters very strangely when * the AP is going back and forth between valid and * invalid parameters. */ ifmgd->flags |= IEEE80211_STA_DISABLE_WMM; } changed |= BSS_CHANGED_QOS; if (elems->max_idle_period_ie) { bss_conf->max_idle_period = le16_to_cpu(elems->max_idle_period_ie->max_idle_period); bss_conf->protected_keep_alive = !!(elems->max_idle_period_ie->idle_options & WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE); changed |= BSS_CHANGED_KEEP_ALIVE; } else { bss_conf->max_idle_period = 0; bss_conf->protected_keep_alive = false; } /* set assoc capability (AID was already set earlier), * ieee80211_set_associated() will tell the driver */ bss_conf->assoc_capability = capab_info; ieee80211_set_associated(sdata, cbss, changed); /* * If we're using 4-addr mode, let the AP know that we're * doing so, so that it can create the STA VLAN on its side */ if (ifmgd->use_4addr) ieee80211_send_4addr_nullfunc(local, sdata); /* * Start timer to probe the connection to the AP now. * Also start the timer that will detect beacon loss. */ ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt); ieee80211_sta_reset_beacon_monitor(sdata); ret = true; out: kfree(bss_ies); return ret; } static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data; u16 capab_info, status_code, aid; struct ieee802_11_elems elems; int ac, uapsd_queues = -1; u8 *pos; bool reassoc; struct cfg80211_bss *bss; struct ieee80211_event event = { .type = MLME_EVENT, .u.mlme.data = ASSOC_EVENT, }; sdata_assert_lock(sdata); if (!assoc_data) return; if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid)) return; /* * AssocResp and ReassocResp have identical structure, so process both * of them in this function. */ if (len < 24 + 6) return; reassoc = ieee80211_is_reassoc_resp(mgmt->frame_control); capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info); status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code); aid = le16_to_cpu(mgmt->u.assoc_resp.aid); sdata_info(sdata, "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n", reassoc ? "Rea" : "A", mgmt->sa, capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14)))); if (assoc_data->fils_kek_len && fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0) return; pos = mgmt->u.assoc_resp.variable; ieee802_11_parse_elems(pos, len - (pos - (u8 *)mgmt), false, &elems, mgmt->bssid, assoc_data->bss->bssid); if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY && elems.timeout_int && elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) { u32 tu, ms; tu = le32_to_cpu(elems.timeout_int->value); ms = tu * 1024 / 1000; sdata_info(sdata, "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n", mgmt->sa, tu, ms); assoc_data->timeout = jiffies + msecs_to_jiffies(ms); assoc_data->timeout_started = true; if (ms > IEEE80211_ASSOC_TIMEOUT) run_again(sdata, assoc_data->timeout); return; } bss = assoc_data->bss; if (status_code != WLAN_STATUS_SUCCESS) { sdata_info(sdata, "%pM denied association (code=%d)\n", mgmt->sa, status_code); ieee80211_destroy_assoc_data(sdata, false, false); event.u.mlme.status = MLME_DENIED; event.u.mlme.reason = status_code; drv_event_callback(sdata->local, sdata, &event); } else { if (!ieee80211_assoc_success(sdata, bss, mgmt, len, &elems)) { /* oops -- internal error -- send timeout for now */ ieee80211_destroy_assoc_data(sdata, false, false); cfg80211_assoc_timeout(sdata->dev, bss); return; } event.u.mlme.status = MLME_SUCCESS; drv_event_callback(sdata->local, sdata, &event); sdata_info(sdata, "associated\n"); /* * destroy assoc_data afterwards, as otherwise an idle * recalc after assoc_data is NULL but before associated * is set can cause the interface to go idle */ ieee80211_destroy_assoc_data(sdata, true, false); /* get uapsd queues configuration */ uapsd_queues = 0; for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) if (sdata->tx_conf[ac].uapsd) uapsd_queues |= ieee80211_ac_to_qos_mask[ac]; } cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues, ifmgd->assoc_req_ies, ifmgd->assoc_req_ies_len); } static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status) { struct ieee80211_local *local = sdata->local; struct ieee80211_bss *bss; struct ieee80211_channel *channel; sdata_assert_lock(sdata); channel = ieee80211_get_channel_khz(local->hw.wiphy, ieee80211_rx_status_to_khz(rx_status)); if (!channel) return; bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, channel); if (bss) { sdata->vif.bss_conf.beacon_rate = bss->beacon_rate; ieee80211_rx_bss_put(local, bss); } } static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) { struct ieee80211_mgmt *mgmt = (void *)skb->data; struct ieee80211_if_managed *ifmgd; struct ieee80211_rx_status *rx_status = (void *) skb->cb; struct ieee80211_channel *channel; size_t baselen, len = skb->len; ifmgd = &sdata->u.mgd; sdata_assert_lock(sdata); /* * According to Draft P802.11ax D6.0 clause 26.17.2.3.2: * "If a 6 GHz AP receives a Probe Request frame and responds with * a Probe Response frame [..], the Address 1 field of the Probe * Response frame shall be set to the broadcast address [..]" * So, on 6GHz band we should also accept broadcast responses. */ channel = ieee80211_get_channel(sdata->local->hw.wiphy, rx_status->freq); if (!channel) return; if (!ether_addr_equal(mgmt->da, sdata->vif.addr) && (channel->band != NL80211_BAND_6GHZ || !is_broadcast_ether_addr(mgmt->da))) return; /* ignore ProbeResp to foreign address */ baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; if (baselen > len) return; ieee80211_rx_bss_info(sdata, mgmt, len, rx_status); if (ifmgd->associated && ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) ieee80211_reset_ap_probe(sdata); } /* * This is the canonical list of information elements we care about, * the filter code also gives us all changes to the Microsoft OUI * (00:50:F2) vendor IE which is used for WMM which we need to track, * as well as the DTPC IE (part of the Cisco OUI) used for signaling * changes to requested client power. * * We implement beacon filtering in software since that means we can * avoid processing the frame here and in cfg80211, and userspace * will not be able to tell whether the hardware supports it or not. * * XXX: This list needs to be dynamic -- userspace needs to be able to * add items it requires. It also needs to be able to tell us to * look out for other vendor IEs. */ static const u64 care_about_ies = (1ULL << WLAN_EID_COUNTRY) | (1ULL << WLAN_EID_ERP_INFO) | (1ULL << WLAN_EID_CHANNEL_SWITCH) | (1ULL << WLAN_EID_PWR_CONSTRAINT) | (1ULL << WLAN_EID_HT_CAPABILITY) | (1ULL << WLAN_EID_HT_OPERATION) | (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN); static void ieee80211_handle_beacon_sig(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_managed *ifmgd, struct ieee80211_bss_conf *bss_conf, struct ieee80211_local *local, struct ieee80211_rx_status *rx_status) { /* Track average RSSI from the Beacon frames of the current AP */ if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) { ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE; ewma_beacon_signal_init(&ifmgd->ave_beacon_signal); ifmgd->last_cqm_event_signal = 0; ifmgd->count_beacon_signal = 1; ifmgd->last_ave_beacon_signal = 0; } else { ifmgd->count_beacon_signal++; } ewma_beacon_signal_add(&ifmgd->ave_beacon_signal, -rx_status->signal); if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold && ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) { int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal); int last_sig = ifmgd->last_ave_beacon_signal; struct ieee80211_event event = { .type = RSSI_EVENT, }; /* * if signal crosses either of the boundaries, invoke callback * with appropriate parameters */ if (sig > ifmgd->rssi_max_thold && (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) { ifmgd->last_ave_beacon_signal = sig; event.u.rssi.data = RSSI_EVENT_HIGH; drv_event_callback(local, sdata, &event); } else if (sig < ifmgd->rssi_min_thold && (last_sig >= ifmgd->rssi_max_thold || last_sig == 0)) { ifmgd->last_ave_beacon_signal = sig; event.u.rssi.data = RSSI_EVENT_LOW; drv_event_callback(local, sdata, &event); } } if (bss_conf->cqm_rssi_thold && ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT && !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) { int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal); int last_event = ifmgd->last_cqm_event_signal; int thold = bss_conf->cqm_rssi_thold; int hyst = bss_conf->cqm_rssi_hyst; if (sig < thold && (last_event == 0 || sig < last_event - hyst)) { ifmgd->last_cqm_event_signal = sig; ieee80211_cqm_rssi_notify( &sdata->vif, NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, sig, GFP_KERNEL); } else if (sig > thold && (last_event == 0 || sig > last_event + hyst)) { ifmgd->last_cqm_event_signal = sig; ieee80211_cqm_rssi_notify( &sdata->vif, NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, sig, GFP_KERNEL); } } if (bss_conf->cqm_rssi_low && ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) { int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal); int last_event = ifmgd->last_cqm_event_signal; int low = bss_conf->cqm_rssi_low; int high = bss_conf->cqm_rssi_high; if (sig < low && (last_event == 0 || last_event >= low)) { ifmgd->last_cqm_event_signal = sig; ieee80211_cqm_rssi_notify( &sdata->vif, NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, sig, GFP_KERNEL); } else if (sig > high && (last_event == 0 || last_event <= high)) { ifmgd->last_cqm_event_signal = sig; ieee80211_cqm_rssi_notify( &sdata->vif, NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, sig, GFP_KERNEL); } } } static bool ieee80211_rx_our_beacon(const u8 *tx_bssid, struct cfg80211_bss *bss) { if (ether_addr_equal(tx_bssid, bss->bssid)) return true; if (!bss->transmitted_bss) return false; return ether_addr_equal(tx_bssid, bss->transmitted_bss->bssid); } static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; size_t baselen; struct ieee802_11_elems elems; struct ieee80211_local *local = sdata->local; struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; struct sta_info *sta; u32 changed = 0; bool erp_valid; u8 erp_value = 0; u32 ncrc; u8 *bssid; u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN]; sdata_assert_lock(sdata); /* Process beacon from the current BSS */ baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt; if (baselen > len) return; rcu_read_lock(); chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (!chanctx_conf) { rcu_read_unlock(); return; } if (ieee80211_rx_status_to_khz(rx_status) != ieee80211_channel_to_khz(chanctx_conf->def.chan)) { rcu_read_unlock(); return; } chan = chanctx_conf->def.chan; rcu_read_unlock(); if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon && ieee80211_rx_our_beacon(mgmt->bssid, ifmgd->assoc_data->bss)) { ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, false, &elems, mgmt->bssid, ifmgd->assoc_data->bss->bssid); ieee80211_rx_bss_info(sdata, mgmt, len, rx_status); if (elems.dtim_period) ifmgd->dtim_period = elems.dtim_period; ifmgd->have_beacon = true; ifmgd->assoc_data->need_beacon = false; if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { sdata->vif.bss_conf.sync_tsf = le64_to_cpu(mgmt->u.beacon.timestamp); sdata->vif.bss_conf.sync_device_ts = rx_status->device_timestamp; sdata->vif.bss_conf.sync_dtim_count = elems.dtim_count; } if (elems.mbssid_config_ie) bss_conf->profile_periodicity = elems.mbssid_config_ie->profile_periodicity; if (elems.ext_capab_len >= 11 && (elems.ext_capab[10] & WLAN_EXT_CAPA11_EMA_SUPPORT)) bss_conf->ema_ap = true; /* continue assoc process */ ifmgd->assoc_data->timeout = jiffies; ifmgd->assoc_data->timeout_started = true; run_again(sdata, ifmgd->assoc_data->timeout); return; } if (!ifmgd->associated || !ieee80211_rx_our_beacon(mgmt->bssid, ifmgd->associated)) return; bssid = ifmgd->associated->bssid; if (!(rx_status->flag & RX_FLAG_NO_SIGNAL_VAL)) ieee80211_handle_beacon_sig(sdata, ifmgd, bss_conf, local, rx_status); if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) { mlme_dbg_ratelimited(sdata, "cancelling AP probe due to a received beacon\n"); ieee80211_reset_ap_probe(sdata); } /* * Push the beacon loss detection into the future since * we are processing a beacon from the AP just now. */ ieee80211_sta_reset_beacon_monitor(sdata); ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4); ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable, len - baselen, false, &elems, care_about_ies, ncrc, mgmt->bssid, bssid); if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) && ieee80211_check_tim(elems.tim, elems.tim_len, bss_conf->aid)) { if (local->hw.conf.dynamic_ps_timeout > 0) { if (local->hw.conf.flags & IEEE80211_CONF_PS) { local->hw.conf.flags &= ~IEEE80211_CONF_PS; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); } ieee80211_send_nullfunc(local, sdata, false); } else if (!local->pspolling && sdata->u.mgd.powersave) { local->pspolling = true; /* * Here is assumed that the driver will be * able to send ps-poll frame and receive a * response even though power save mode is * enabled, but some drivers might require * to disable power save here. This needs * to be investigated. */ ieee80211_send_pspoll(local, sdata); } } if (sdata->vif.p2p || sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) { struct ieee80211_p2p_noa_attr noa = {}; int ret; ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable, len - baselen, IEEE80211_P2P_ATTR_ABSENCE_NOTICE, (u8 *) &noa, sizeof(noa)); if (ret >= 2) { if (sdata->u.mgd.p2p_noa_index != noa.index) { /* valid noa_attr and index changed */ sdata->u.mgd.p2p_noa_index = noa.index; memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa)); changed |= BSS_CHANGED_P2P_PS; /* * make sure we update all information, the CRC * mechanism doesn't look at P2P attributes. */ ifmgd->beacon_crc_valid = false; } } else if (sdata->u.mgd.p2p_noa_index != -1) { /* noa_attr not found and we had valid noa_attr before */ sdata->u.mgd.p2p_noa_index = -1; memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr)); changed |= BSS_CHANGED_P2P_PS; ifmgd->beacon_crc_valid = false; } } if (ifmgd->csa_waiting_bcn) ieee80211_chswitch_post_beacon(sdata); /* * Update beacon timing and dtim count on every beacon appearance. This * will allow the driver to use the most updated values. Do it before * comparing this one with last received beacon. * IMPORTANT: These parameters would possibly be out of sync by the time * the driver will use them. The synchronized view is currently * guaranteed only in certain callbacks. */ if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { sdata->vif.bss_conf.sync_tsf = le64_to_cpu(mgmt->u.beacon.timestamp); sdata->vif.bss_conf.sync_device_ts = rx_status->device_timestamp; sdata->vif.bss_conf.sync_dtim_count = elems.dtim_count; } if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid) return; ifmgd->beacon_crc = ncrc; ifmgd->beacon_crc_valid = true; ieee80211_rx_bss_info(sdata, mgmt, len, rx_status); ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, rx_status->device_timestamp, &elems, true); if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) && ieee80211_sta_wmm_params(local, sdata, elems.wmm_param, elems.wmm_param_len, elems.mu_edca_param_set)) changed |= BSS_CHANGED_QOS; /* * If we haven't had a beacon before, tell the driver about the * DTIM period (and beacon timing if desired) now. */ if (!ifmgd->have_beacon) { /* a few bogus AP send dtim_period = 0 or no TIM IE */ bss_conf->dtim_period = elems.dtim_period ?: 1; changed |= BSS_CHANGED_BEACON_INFO; ifmgd->have_beacon = true; mutex_lock(&local->iflist_mtx); ieee80211_recalc_ps(local); mutex_unlock(&local->iflist_mtx); ieee80211_recalc_ps_vif(sdata); } if (elems.erp_info) { erp_valid = true; erp_value = elems.erp_info[0]; } else { erp_valid = false; } changed |= ieee80211_handle_bss_capability(sdata, le16_to_cpu(mgmt->u.beacon.capab_info), erp_valid, erp_value); mutex_lock(&local->sta_mtx); sta = sta_info_get(sdata, bssid); changed |= ieee80211_recalc_twt_req(sdata, sta, &elems); if (ieee80211_config_bw(sdata, sta, elems.ht_cap_elem, elems.vht_cap_elem, elems.ht_operation, elems.vht_operation, elems.he_operation, bssid, &changed)) { mutex_unlock(&local->sta_mtx); sdata_info(sdata, "failed to follow AP %pM bandwidth change, disconnect\n", bssid); ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, WLAN_REASON_DEAUTH_LEAVING, true, deauth_buf); ieee80211_report_disconnect(sdata, deauth_buf, sizeof(deauth_buf), true, WLAN_REASON_DEAUTH_LEAVING); return; } if (sta && elems.opmode_notif) ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif, rx_status->band); mutex_unlock(&local->sta_mtx); changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt, elems.country_elem, elems.country_elem_len, elems.pwr_constr_elem, elems.cisco_dtpc_elem); ieee80211_bss_info_change_notify(sdata, changed); } void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb) { struct ieee80211_rx_status *rx_status; struct ieee80211_mgmt *mgmt; u16 fc; struct ieee802_11_elems elems; int ies_len; rx_status = (struct ieee80211_rx_status *) skb->cb; mgmt = (struct ieee80211_mgmt *) skb->data; fc = le16_to_cpu(mgmt->frame_control); sdata_lock(sdata); switch (fc & IEEE80211_FCTL_STYPE) { case IEEE80211_STYPE_BEACON: ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status); break; case IEEE80211_STYPE_PROBE_RESP: ieee80211_rx_mgmt_probe_resp(sdata, skb); break; case IEEE80211_STYPE_AUTH: ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len); break; case IEEE80211_STYPE_DEAUTH: ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len); break; case IEEE80211_STYPE_DISASSOC: ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len); break; case IEEE80211_STYPE_ASSOC_RESP: case IEEE80211_STYPE_REASSOC_RESP: ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len); break; case IEEE80211_STYPE_ACTION: if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) { ies_len = skb->len - offsetof(struct ieee80211_mgmt, u.action.u.chan_switch.variable); if (ies_len < 0) break; /* CSA IE cannot be overridden, no need for BSSID */ ieee802_11_parse_elems( mgmt->u.action.u.chan_switch.variable, ies_len, true, &elems, mgmt->bssid, NULL); if (elems.parse_error) break; ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, rx_status->device_timestamp, &elems, false); } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) { ies_len = skb->len - offsetof(struct ieee80211_mgmt, u.action.u.ext_chan_switch.variable); if (ies_len < 0) break; /* * extended CSA IE can't be overridden, no need for * BSSID */ ieee802_11_parse_elems( mgmt->u.action.u.ext_chan_switch.variable, ies_len, true, &elems, mgmt->bssid, NULL); if (elems.parse_error) break; /* for the handling code pretend this was also an IE */ elems.ext_chansw_ie = &mgmt->u.action.u.ext_chan_switch.data; ieee80211_sta_process_chanswitch(sdata, rx_status->mactime, rx_status->device_timestamp, &elems, false); } break; } sdata_unlock(sdata); } static void ieee80211_sta_timer(struct timer_list *t) { struct ieee80211_sub_if_data *sdata = from_timer(sdata, t, u.mgd.timer); ieee80211_queue_work(&sdata->local->hw, &sdata->work); } static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, u8 *bssid, u8 reason, bool tx) { u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason, tx, frame_buf); ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, reason); } static int ieee80211_auth(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data; u32 tx_flags = 0; u16 trans = 1; u16 status = 0; u16 prepare_tx_duration = 0; sdata_assert_lock(sdata); if (WARN_ON_ONCE(!auth_data)) return -EINVAL; auth_data->tries++; if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) { sdata_info(sdata, "authentication with %pM timed out\n", auth_data->bss->bssid); /* * Most likely AP is not in the range so remove the * bss struct for that AP. */ cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss); return -ETIMEDOUT; } if (auth_data->algorithm == WLAN_AUTH_SAE) prepare_tx_duration = jiffies_to_msecs(IEEE80211_AUTH_TIMEOUT_SAE); drv_mgd_prepare_tx(local, sdata, prepare_tx_duration); sdata_info(sdata, "send auth to %pM (try %d/%d)\n", auth_data->bss->bssid, auth_data->tries, IEEE80211_AUTH_MAX_TRIES); auth_data->expected_transaction = 2; if (auth_data->algorithm == WLAN_AUTH_SAE) { trans = auth_data->sae_trans; status = auth_data->sae_status; auth_data->expected_transaction = trans; } if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS | IEEE80211_TX_INTFL_MLME_CONN_TX; ieee80211_send_auth(sdata, trans, auth_data->algorithm, status, auth_data->data, auth_data->data_len, auth_data->bss->bssid, auth_data->bss->bssid, NULL, 0, 0, tx_flags); if (tx_flags == 0) { if (auth_data->algorithm == WLAN_AUTH_SAE) auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT_SAE; else auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; } else { auth_data->timeout = round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG); } auth_data->timeout_started = true; run_again(sdata, auth_data->timeout); return 0; } static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) { struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data; struct ieee80211_local *local = sdata->local; sdata_assert_lock(sdata); assoc_data->tries++; if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) { sdata_info(sdata, "association with %pM timed out\n", assoc_data->bss->bssid); /* * Most likely AP is not in the range so remove the * bss struct for that AP. */ cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss); return -ETIMEDOUT; } sdata_info(sdata, "associate with %pM (try %d/%d)\n", assoc_data->bss->bssid, assoc_data->tries, IEEE80211_ASSOC_MAX_TRIES); ieee80211_send_assoc(sdata); if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) { assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; assoc_data->timeout_started = true; run_again(sdata, assoc_data->timeout); } else { assoc_data->timeout = round_jiffies_up(jiffies + IEEE80211_ASSOC_TIMEOUT_LONG); assoc_data->timeout_started = true; run_again(sdata, assoc_data->timeout); } return 0; } void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata, __le16 fc, bool acked) { struct ieee80211_local *local = sdata->local; sdata->u.mgd.status_fc = fc; sdata->u.mgd.status_acked = acked; sdata->u.mgd.status_received = true; ieee80211_queue_work(&local->hw, &sdata->work); } void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; sdata_lock(sdata); if (ifmgd->status_received) { __le16 fc = ifmgd->status_fc; bool status_acked = ifmgd->status_acked; ifmgd->status_received = false; if (ifmgd->auth_data && ieee80211_is_auth(fc)) { if (status_acked) { if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE) ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT_SAE; else ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT_SHORT; run_again(sdata, ifmgd->auth_data->timeout); } else { ifmgd->auth_data->timeout = jiffies - 1; } ifmgd->auth_data->timeout_started = true; } else if (ifmgd->assoc_data && (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))) { if (status_acked) { ifmgd->assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT; run_again(sdata, ifmgd->assoc_data->timeout); } else { ifmgd->assoc_data->timeout = jiffies - 1; } ifmgd->assoc_data->timeout_started = true; } } if (ifmgd->auth_data && ifmgd->auth_data->timeout_started && time_after(jiffies, ifmgd->auth_data->timeout)) { if (ifmgd->auth_data->done) { /* * ok ... we waited for assoc but userspace didn't, * so let's just kill the auth data */ ieee80211_destroy_auth_data(sdata, false); } else if (ieee80211_auth(sdata)) { u8 bssid[ETH_ALEN]; struct ieee80211_event event = { .type = MLME_EVENT, .u.mlme.data = AUTH_EVENT, .u.mlme.status = MLME_TIMEOUT, }; memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN); ieee80211_destroy_auth_data(sdata, false); cfg80211_auth_timeout(sdata->dev, bssid); drv_event_callback(sdata->local, sdata, &event); } } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started) run_again(sdata, ifmgd->auth_data->timeout); if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started && time_after(jiffies, ifmgd->assoc_data->timeout)) { if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) || ieee80211_do_assoc(sdata)) { struct cfg80211_bss *bss = ifmgd->assoc_data->bss; struct ieee80211_event event = { .type = MLME_EVENT, .u.mlme.data = ASSOC_EVENT, .u.mlme.status = MLME_TIMEOUT, }; ieee80211_destroy_assoc_data(sdata, false, false); cfg80211_assoc_timeout(sdata->dev, bss); drv_event_callback(sdata->local, sdata, &event); } } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started) run_again(sdata, ifmgd->assoc_data->timeout); if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL && ifmgd->associated) { u8 bssid[ETH_ALEN]; int max_tries; memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) max_tries = max_nullfunc_tries; else max_tries = max_probe_tries; /* ACK received for nullfunc probing frame */ if (!ifmgd->probe_send_count) ieee80211_reset_ap_probe(sdata); else if (ifmgd->nullfunc_failed) { if (ifmgd->probe_send_count < max_tries) { mlme_dbg(sdata, "No ack for nullfunc frame to AP %pM, try %d/%i\n", bssid, ifmgd->probe_send_count, max_tries); ieee80211_mgd_probe_ap_send(sdata); } else { mlme_dbg(sdata, "No ack for nullfunc frame to AP %pM, disconnecting.\n", bssid); ieee80211_sta_connection_lost(sdata, bssid, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); } } else if (time_is_after_jiffies(ifmgd->probe_timeout)) run_again(sdata, ifmgd->probe_timeout); else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) { mlme_dbg(sdata, "Failed to send nullfunc to AP %pM after %dms, disconnecting\n", bssid, probe_wait_ms); ieee80211_sta_connection_lost(sdata, bssid, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); } else if (ifmgd->probe_send_count < max_tries) { mlme_dbg(sdata, "No probe response from AP %pM after %dms, try %d/%i\n", bssid, probe_wait_ms, ifmgd->probe_send_count, max_tries); ieee80211_mgd_probe_ap_send(sdata); } else { /* * We actually lost the connection ... or did we? * Let's make sure! */ mlme_dbg(sdata, "No probe response from AP %pM after %dms, disconnecting.\n", bssid, probe_wait_ms); ieee80211_sta_connection_lost(sdata, bssid, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false); } } sdata_unlock(sdata); } static void ieee80211_sta_bcn_mon_timer(struct timer_list *t) { struct ieee80211_sub_if_data *sdata = from_timer(sdata, t, u.mgd.bcn_mon_timer); struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn) return; sdata->u.mgd.connection_loss = false; ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.beacon_connection_loss_work); } static void ieee80211_sta_conn_mon_timer(struct timer_list *t) { struct ieee80211_sub_if_data *sdata = from_timer(sdata, t, u.mgd.conn_mon_timer); struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_local *local = sdata->local; if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn) return; ieee80211_queue_work(&local->hw, &ifmgd->monitor_work); } static void ieee80211_sta_monitor_work(struct work_struct *work) { struct ieee80211_sub_if_data *sdata = container_of(work, struct ieee80211_sub_if_data, u.mgd.monitor_work); ieee80211_mgd_probe_ap(sdata, false); } static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) { if (sdata->vif.type == NL80211_IFTYPE_STATION) { __ieee80211_stop_poll(sdata); /* let's probe the connection once */ if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR)) ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.monitor_work); } } #ifdef CONFIG_PM void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; sdata_lock(sdata); if (ifmgd->auth_data || ifmgd->assoc_data) { const u8 *bssid = ifmgd->auth_data ? ifmgd->auth_data->bss->bssid : ifmgd->assoc_data->bss->bssid; /* * If we are trying to authenticate / associate while suspending, * cfg80211 won't know and won't actually abort those attempts, * thus we need to do that ourselves. */ ieee80211_send_deauth_disassoc(sdata, bssid, bssid, IEEE80211_STYPE_DEAUTH, WLAN_REASON_DEAUTH_LEAVING, false, frame_buf); if (ifmgd->assoc_data) ieee80211_destroy_assoc_data(sdata, false, true); if (ifmgd->auth_data) ieee80211_destroy_auth_data(sdata, false); cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); } /* This is a bit of a hack - we should find a better and more generic * solution to this. Normally when suspending, cfg80211 will in fact * deauthenticate. However, it doesn't (and cannot) stop an ongoing * auth (not so important) or assoc (this is the problem) process. * * As a consequence, it can happen that we are in the process of both * associating and suspending, and receive an association response * after cfg80211 has checked if it needs to disconnect, but before * we actually set the flag to drop incoming frames. This will then * cause the workqueue flush to process the association response in * the suspend, resulting in a successful association just before it * tries to remove the interface from the driver, which now though * has a channel context assigned ... this results in issues. * * To work around this (for now) simply deauth here again if we're * now connected. */ if (ifmgd->associated && !sdata->local->wowlan) { u8 bssid[ETH_ALEN]; struct cfg80211_deauth_request req = { .reason_code = WLAN_REASON_DEAUTH_LEAVING, .bssid = bssid, }; memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); ieee80211_mgd_deauth(sdata, &req); } sdata_unlock(sdata); } void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; sdata_lock(sdata); if (!ifmgd->associated) { sdata_unlock(sdata); return; } if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) { sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME; mlme_dbg(sdata, "driver requested disconnect after resume\n"); ieee80211_sta_connection_lost(sdata, ifmgd->associated->bssid, WLAN_REASON_UNSPECIFIED, true); sdata_unlock(sdata); return; } sdata_unlock(sdata); } #endif /* interface setup */ void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd; ifmgd = &sdata->u.mgd; INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work); INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work); INIT_WORK(&ifmgd->beacon_connection_loss_work, ieee80211_beacon_connection_loss_work); INIT_WORK(&ifmgd->csa_connection_drop_work, ieee80211_csa_connection_drop_work); INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work); INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work, ieee80211_tdls_peer_del_work); timer_setup(&ifmgd->timer, ieee80211_sta_timer, 0); timer_setup(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, 0); timer_setup(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, 0); timer_setup(&ifmgd->chswitch_timer, ieee80211_chswitch_timer, 0); INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk, ieee80211_sta_handle_tspec_ac_params_wk); ifmgd->flags = 0; ifmgd->powersave = sdata->wdev.ps; ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues; ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len; ifmgd->p2p_noa_index = -1; if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS) ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC; else ifmgd->req_smps = IEEE80211_SMPS_OFF; /* Setup TDLS data */ spin_lock_init(&ifmgd->teardown_lock); ifmgd->teardown_skb = NULL; ifmgd->orig_teardown_skb = NULL; } /* scan finished notification */ void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata; /* Restart STA timers */ rcu_read_lock(); list_for_each_entry_rcu(sdata, &local->interfaces, list) { if (ieee80211_sdata_running(sdata)) ieee80211_restart_sta_timer(sdata); } rcu_read_unlock(); } static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata, struct cfg80211_bss *cbss) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; const u8 *ht_cap_ie, *vht_cap_ie; const struct ieee80211_ht_cap *ht_cap; const struct ieee80211_vht_cap *vht_cap; u8 chains = 1; if (ifmgd->flags & IEEE80211_STA_DISABLE_HT) return chains; ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY); if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) { ht_cap = (void *)(ht_cap_ie + 2); chains = ieee80211_mcs_to_chains(&ht_cap->mcs); /* * TODO: use "Tx Maximum Number Spatial Streams Supported" and * "Tx Unequal Modulation Supported" fields. */ } if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) return chains; vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY); if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) { u8 nss; u16 tx_mcs_map; vht_cap = (void *)(vht_cap_ie + 2); tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map); for (nss = 8; nss > 0; nss--) { if (((tx_mcs_map >> (2 * (nss - 1))) & 3) != IEEE80211_VHT_MCS_NOT_SUPPORTED) break; } /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */ chains = max(chains, nss); } return chains; } static bool ieee80211_verify_sta_he_mcs_support(struct ieee80211_supported_band *sband, const struct ieee80211_he_operation *he_op) { const struct ieee80211_sta_he_cap *sta_he_cap = ieee80211_get_he_sta_cap(sband); u16 ap_min_req_set; int i; if (!sta_he_cap || !he_op) return false; ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set); /* Need to go over for 80MHz, 160MHz and for 80+80 */ for (i = 0; i < 3; i++) { const struct ieee80211_he_mcs_nss_supp *sta_mcs_nss_supp = &sta_he_cap->he_mcs_nss_supp; u16 sta_mcs_map_rx = le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i]); u16 sta_mcs_map_tx = le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i + 1]); u8 nss; bool verified = true; /* * For each band there is a maximum of 8 spatial streams * possible. Each of the sta_mcs_map_* is a 16-bit struct built * of 2 bits per NSS (1-8), with the values defined in enum * ieee80211_he_mcs_support. Need to make sure STA TX and RX * capabilities aren't less than the AP's minimum requirements * for this HE BSS per SS. * It is enough to find one such band that meets the reqs. */ for (nss = 8; nss > 0; nss--) { u8 sta_rx_val = (sta_mcs_map_rx >> (2 * (nss - 1))) & 3; u8 sta_tx_val = (sta_mcs_map_tx >> (2 * (nss - 1))) & 3; u8 ap_val = (ap_min_req_set >> (2 * (nss - 1))) & 3; if (ap_val == IEEE80211_HE_MCS_NOT_SUPPORTED) continue; /* * Make sure the HE AP doesn't require MCSs that aren't * supported by the client */ if (sta_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || sta_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED || (ap_val > sta_rx_val) || (ap_val > sta_tx_val)) { verified = false; break; } } if (verified) return true; } /* If here, STA doesn't meet AP's HE min requirements */ return false; } static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, struct cfg80211_bss *cbss) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; const struct ieee80211_ht_cap *ht_cap = NULL; const struct ieee80211_ht_operation *ht_oper = NULL; const struct ieee80211_vht_operation *vht_oper = NULL; const struct ieee80211_he_operation *he_oper = NULL; struct ieee80211_supported_band *sband; struct cfg80211_chan_def chandef; bool is_6ghz = cbss->channel->band == NL80211_BAND_6GHZ; struct ieee80211_bss *bss = (void *)cbss->priv; int ret; u32 i; bool have_80mhz; sband = local->hw.wiphy->bands[cbss->channel->band]; ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ | IEEE80211_STA_DISABLE_80P80MHZ | IEEE80211_STA_DISABLE_160MHZ); /* disable HT/VHT/HE if we don't support them */ if (!sband->ht_cap.ht_supported && !is_6ghz) { ifmgd->flags |= IEEE80211_STA_DISABLE_HT; ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; ifmgd->flags |= IEEE80211_STA_DISABLE_HE; } if (!sband->vht_cap.vht_supported && !is_6ghz) { ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; ifmgd->flags |= IEEE80211_STA_DISABLE_HE; } if (!ieee80211_get_he_sta_cap(sband)) ifmgd->flags |= IEEE80211_STA_DISABLE_HE; rcu_read_lock(); if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && !is_6ghz) { const u8 *ht_oper_ie, *ht_cap_ie; ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION); if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper)) ht_oper = (void *)(ht_oper_ie + 2); ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY); if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) ht_cap = (void *)(ht_cap_ie + 2); if (!ht_cap) { ifmgd->flags |= IEEE80211_STA_DISABLE_HT; ht_oper = NULL; } } if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && !is_6ghz) { const u8 *vht_oper_ie, *vht_cap; vht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_OPERATION); if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper)) vht_oper = (void *)(vht_oper_ie + 2); if (vht_oper && !ht_oper) { vht_oper = NULL; sdata_info(sdata, "AP advertised VHT without HT, disabling HT/VHT/HE\n"); ifmgd->flags |= IEEE80211_STA_DISABLE_HT; ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; ifmgd->flags |= IEEE80211_STA_DISABLE_HE; } vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY); if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) { ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; vht_oper = NULL; } } if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE)) { const struct cfg80211_bss_ies *ies; const u8 *he_oper_ie; ies = rcu_dereference(cbss->ies); he_oper_ie = cfg80211_find_ext_ie(WLAN_EID_EXT_HE_OPERATION, ies->data, ies->len); if (he_oper_ie && he_oper_ie[1] == ieee80211_he_oper_size(&he_oper_ie[3])) he_oper = (void *)(he_oper_ie + 3); else he_oper = NULL; if (!ieee80211_verify_sta_he_mcs_support(sband, he_oper)) ifmgd->flags |= IEEE80211_STA_DISABLE_HE; } /* Allow VHT if at least one channel on the sband supports 80 MHz */ have_80mhz = false; for (i = 0; i < sband->n_channels; i++) { if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED | IEEE80211_CHAN_NO_80MHZ)) continue; have_80mhz = true; break; } if (!have_80mhz) ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; ifmgd->flags |= ieee80211_determine_chantype(sdata, sband, cbss->channel, bss->vht_cap_info, ht_oper, vht_oper, he_oper, &chandef, false); sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss), local->rx_chains); rcu_read_unlock(); if (ifmgd->flags & IEEE80211_STA_DISABLE_HE && is_6ghz) { sdata_info(sdata, "Rejecting non-HE 6/7 GHz connection"); return -EINVAL; } /* will change later if needed */ sdata->smps_mode = IEEE80211_SMPS_OFF; mutex_lock(&local->mtx); /* * If this fails (possibly due to channel context sharing * on incompatible channels, e.g. 80+80 and 160 sharing the * same control channel) try to use a smaller bandwidth. */ ret = ieee80211_vif_use_channel(sdata, &chandef, IEEE80211_CHANCTX_SHARED); /* don't downgrade for 5 and 10 MHz channels, though. */ if (chandef.width == NL80211_CHAN_WIDTH_5 || chandef.width == NL80211_CHAN_WIDTH_10) goto out; while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) { ifmgd->flags |= ieee80211_chandef_downgrade(&chandef); ret = ieee80211_vif_use_channel(sdata, &chandef, IEEE80211_CHANCTX_SHARED); } out: mutex_unlock(&local->mtx); return ret; } static bool ieee80211_get_dtim(const struct cfg80211_bss_ies *ies, u8 *dtim_count, u8 *dtim_period) { const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, ies->data, ies->len); const u8 *idx_ie = cfg80211_find_ie(WLAN_EID_MULTI_BSSID_IDX, ies->data, ies->len); const struct ieee80211_tim_ie *tim = NULL; const struct ieee80211_bssid_index *idx; bool valid = tim_ie && tim_ie[1] >= 2; if (valid) tim = (void *)(tim_ie + 2); if (dtim_count) *dtim_count = valid ? tim->dtim_count : 0; if (dtim_period) *dtim_period = valid ? tim->dtim_period : 0; /* Check if value is overridden by non-transmitted profile */ if (!idx_ie || idx_ie[1] < 3) return valid; idx = (void *)(idx_ie + 2); if (dtim_count) *dtim_count = idx->dtim_count; if (dtim_period) *dtim_period = idx->dtim_period; return true; } static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, struct cfg80211_bss *cbss, bool assoc, bool override) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_bss *bss = (void *)cbss->priv; struct sta_info *new_sta = NULL; struct ieee80211_supported_band *sband; bool have_sta = false; int err; sband = local->hw.wiphy->bands[cbss->channel->band]; if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data)) return -EINVAL; /* If a reconfig is happening, bail out */ if (local->in_reconfig) return -EBUSY; if (assoc) { rcu_read_lock(); have_sta = sta_info_get(sdata, cbss->bssid); rcu_read_unlock(); } if (!have_sta) { new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL); if (!new_sta) return -ENOMEM; } /* * Set up the information for the new channel before setting the * new channel. We can't - completely race-free - change the basic * rates bitmap and the channel (sband) that it refers to, but if * we set it up before we at least avoid calling into the driver's * bss_info_changed() method with invalid information (since we do * call that from changing the channel - only for IDLE and perhaps * some others, but ...). * * So to avoid that, just set up all the new information before the * channel, but tell the driver to apply it only afterwards, since * it might need the new channel for that. */ if (new_sta) { u32 rates = 0, basic_rates = 0; bool have_higher_than_11mbit; int min_rate = INT_MAX, min_rate_index = -1; const struct cfg80211_bss_ies *ies; int shift = ieee80211_vif_get_shift(&sdata->vif); ieee80211_get_rates(sband, bss->supp_rates, bss->supp_rates_len, &rates, &basic_rates, &have_higher_than_11mbit, &min_rate, &min_rate_index, shift); /* * This used to be a workaround for basic rates missing * in the association response frame. Now that we no * longer use the basic rates from there, it probably * doesn't happen any more, but keep the workaround so * in case some *other* APs are buggy in different ways * we can connect -- with a warning. * Allow this workaround only in case the AP provided at least * one rate. */ if (min_rate_index < 0) { sdata_info(sdata, "No legacy rates in association response\n"); sta_info_free(local, new_sta); return -EINVAL; } else if (!basic_rates) { sdata_info(sdata, "No basic rates, using min rate instead\n"); basic_rates = BIT(min_rate_index); } if (rates) new_sta->sta.supp_rates[cbss->channel->band] = rates; else sdata_info(sdata, "No rates found, keeping mandatory only\n"); sdata->vif.bss_conf.basic_rates = basic_rates; /* cf. IEEE 802.11 9.2.12 */ if (cbss->channel->band == NL80211_BAND_2GHZ && have_higher_than_11mbit) sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE; else sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE; memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN); /* set timing information */ sdata->vif.bss_conf.beacon_int = cbss->beacon_interval; rcu_read_lock(); ies = rcu_dereference(cbss->beacon_ies); if (ies) { sdata->vif.bss_conf.sync_tsf = ies->tsf; sdata->vif.bss_conf.sync_device_ts = bss->device_ts_beacon; ieee80211_get_dtim(ies, &sdata->vif.bss_conf.sync_dtim_count, NULL); } else if (!ieee80211_hw_check(&sdata->local->hw, TIMING_BEACON_ONLY)) { ies = rcu_dereference(cbss->proberesp_ies); /* must be non-NULL since beacon IEs were NULL */ sdata->vif.bss_conf.sync_tsf = ies->tsf; sdata->vif.bss_conf.sync_device_ts = bss->device_ts_presp; sdata->vif.bss_conf.sync_dtim_count = 0; } else { sdata->vif.bss_conf.sync_tsf = 0; sdata->vif.bss_conf.sync_device_ts = 0; sdata->vif.bss_conf.sync_dtim_count = 0; } rcu_read_unlock(); } if (new_sta || override) { err = ieee80211_prep_channel(sdata, cbss); if (err) { if (new_sta) sta_info_free(local, new_sta); return -EINVAL; } } if (new_sta) { /* * tell driver about BSSID, basic rates and timing * this was set up above, before setting the channel */ ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES | BSS_CHANGED_BEACON_INT); if (assoc) sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH); err = sta_info_insert(new_sta); new_sta = NULL; if (err) { sdata_info(sdata, "failed to insert STA entry for the AP (error %d)\n", err); return err; } } else WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid)); /* Cancel scan to ensure that nothing interferes with connection */ if (local->scanning) ieee80211_scan_cancel(local); return 0; } /* config hooks */ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, struct cfg80211_auth_request *req) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_mgd_auth_data *auth_data; u16 auth_alg; int err; bool cont_auth; /* prepare auth data structure */ switch (req->auth_type) { case NL80211_AUTHTYPE_OPEN_SYSTEM: auth_alg = WLAN_AUTH_OPEN; break; case NL80211_AUTHTYPE_SHARED_KEY: if (fips_enabled) return -EOPNOTSUPP; auth_alg = WLAN_AUTH_SHARED_KEY; break; case NL80211_AUTHTYPE_FT: auth_alg = WLAN_AUTH_FT; break; case NL80211_AUTHTYPE_NETWORK_EAP: auth_alg = WLAN_AUTH_LEAP; break; case NL80211_AUTHTYPE_SAE: auth_alg = WLAN_AUTH_SAE; break; case NL80211_AUTHTYPE_FILS_SK: auth_alg = WLAN_AUTH_FILS_SK; break; case NL80211_AUTHTYPE_FILS_SK_PFS: auth_alg = WLAN_AUTH_FILS_SK_PFS; break; case NL80211_AUTHTYPE_FILS_PK: auth_alg = WLAN_AUTH_FILS_PK; break; default: return -EOPNOTSUPP; } if (ifmgd->assoc_data) return -EBUSY; auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len + req->ie_len, GFP_KERNEL); if (!auth_data) return -ENOMEM; auth_data->bss = req->bss; if (req->auth_data_len >= 4) { if (req->auth_type == NL80211_AUTHTYPE_SAE) { __le16 *pos = (__le16 *) req->auth_data; auth_data->sae_trans = le16_to_cpu(pos[0]); auth_data->sae_status = le16_to_cpu(pos[1]); } memcpy(auth_data->data, req->auth_data + 4, req->auth_data_len - 4); auth_data->data_len += req->auth_data_len - 4; } /* Check if continuing authentication or trying to authenticate with the * same BSS that we were in the process of authenticating with and avoid * removal and re-addition of the STA entry in * ieee80211_prep_connection(). */ cont_auth = ifmgd->auth_data && req->bss == ifmgd->auth_data->bss; if (req->ie && req->ie_len) { memcpy(&auth_data->data[auth_data->data_len], req->ie, req->ie_len); auth_data->data_len += req->ie_len; } if (req->key && req->key_len) { auth_data->key_len = req->key_len; auth_data->key_idx = req->key_idx; memcpy(auth_data->key, req->key, req->key_len); } auth_data->algorithm = auth_alg; /* try to authenticate/probe */ if (ifmgd->auth_data) { if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE) { auth_data->peer_confirmed = ifmgd->auth_data->peer_confirmed; } ieee80211_destroy_auth_data(sdata, cont_auth); } /* prep auth_data so we don't go into idle on disassoc */ ifmgd->auth_data = auth_data; /* If this is continuation of an ongoing SAE authentication exchange * (i.e., request to send SAE Confirm) and the peer has already * confirmed, mark authentication completed since we are about to send * out SAE Confirm. */ if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE && auth_data->peer_confirmed && auth_data->sae_trans == 2) ieee80211_mark_sta_auth(sdata, req->bss->bssid); if (ifmgd->associated) { u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; sdata_info(sdata, "disconnect from AP %pM for new auth to %pM\n", ifmgd->associated->bssid, req->bss->bssid); ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, WLAN_REASON_UNSPECIFIED, false, frame_buf); ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, WLAN_REASON_UNSPECIFIED); } sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid); err = ieee80211_prep_connection(sdata, req->bss, cont_auth, false); if (err) goto err_clear; err = ieee80211_auth(sdata); if (err) { sta_info_destroy_addr(sdata, req->bss->bssid); goto err_clear; } /* hold our own reference */ cfg80211_ref_bss(local->hw.wiphy, auth_data->bss); return 0; err_clear: eth_zero_addr(ifmgd->bssid); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); ifmgd->auth_data = NULL; mutex_lock(&sdata->local->mtx); ieee80211_vif_release_channel(sdata); mutex_unlock(&sdata->local->mtx); kfree(auth_data); return err; } int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, struct cfg80211_assoc_request *req) { bool is_6ghz = req->bss->channel->band == NL80211_BAND_6GHZ; struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_bss *bss = (void *)req->bss->priv; struct ieee80211_mgd_assoc_data *assoc_data; const struct cfg80211_bss_ies *beacon_ies; struct ieee80211_supported_band *sband; const u8 *ssidie, *ht_ie, *vht_ie; int i, err; bool override = false; assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL); if (!assoc_data) return -ENOMEM; rcu_read_lock(); ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID); if (!ssidie || ssidie[1] > sizeof(assoc_data->ssid)) { rcu_read_unlock(); kfree(assoc_data); return -EINVAL; } memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]); assoc_data->ssid_len = ssidie[1]; rcu_read_unlock(); if (ifmgd->associated) { u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; sdata_info(sdata, "disconnect from AP %pM for new assoc to %pM\n", ifmgd->associated->bssid, req->bss->bssid); ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, WLAN_REASON_UNSPECIFIED, false, frame_buf); ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, WLAN_REASON_UNSPECIFIED); } if (ifmgd->auth_data && !ifmgd->auth_data->done) { err = -EBUSY; goto err_free; } if (ifmgd->assoc_data) { err = -EBUSY; goto err_free; } if (ifmgd->auth_data) { bool match; /* keep sta info, bssid if matching */ match = ether_addr_equal(ifmgd->bssid, req->bss->bssid); ieee80211_destroy_auth_data(sdata, match); } /* prepare assoc data */ ifmgd->beacon_crc_valid = false; assoc_data->wmm = bss->wmm_used && (local->hw.queues >= IEEE80211_NUM_ACS); /* * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode. * We still associate in non-HT mode (11a/b/g) if any one of these * ciphers is configured as pairwise. * We can set this to true for non-11n hardware, that'll be checked * separately along with the peer capabilities. */ for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) { if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 || req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP || req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) { ifmgd->flags |= IEEE80211_STA_DISABLE_HT; ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; ifmgd->flags |= IEEE80211_STA_DISABLE_HE; netdev_info(sdata->dev, "disabling HT/VHT/HE due to WEP/TKIP use\n"); } } sband = local->hw.wiphy->bands[req->bss->channel->band]; /* also disable HT/VHT/HE if the AP doesn't use WMM */ if (!bss->wmm_used) { ifmgd->flags |= IEEE80211_STA_DISABLE_HT; ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; ifmgd->flags |= IEEE80211_STA_DISABLE_HE; netdev_info(sdata->dev, "disabling HT/VHT/HE as WMM/QoS is not supported by the AP\n"); } memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa)); memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask, sizeof(ifmgd->ht_capa_mask)); memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa)); memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask, sizeof(ifmgd->vht_capa_mask)); if (req->ie && req->ie_len) { memcpy(assoc_data->ie, req->ie, req->ie_len); assoc_data->ie_len = req->ie_len; } if (req->fils_kek) { /* should already be checked in cfg80211 - so warn */ if (WARN_ON(req->fils_kek_len > FILS_MAX_KEK_LEN)) { err = -EINVAL; goto err_free; } memcpy(assoc_data->fils_kek, req->fils_kek, req->fils_kek_len); assoc_data->fils_kek_len = req->fils_kek_len; } if (req->fils_nonces) memcpy(assoc_data->fils_nonces, req->fils_nonces, 2 * FILS_NONCE_LEN); assoc_data->bss = req->bss; if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) { if (ifmgd->powersave) sdata->smps_mode = IEEE80211_SMPS_DYNAMIC; else sdata->smps_mode = IEEE80211_SMPS_OFF; } else sdata->smps_mode = ifmgd->req_smps; assoc_data->capability = req->bss->capability; assoc_data->supp_rates = bss->supp_rates; assoc_data->supp_rates_len = bss->supp_rates_len; rcu_read_lock(); ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION); if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation)) assoc_data->ap_ht_param = ((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param; else if (!is_6ghz) ifmgd->flags |= IEEE80211_STA_DISABLE_HT; vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY); if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap)) memcpy(&assoc_data->ap_vht_cap, vht_ie + 2, sizeof(struct ieee80211_vht_cap)); else if (!is_6ghz) ifmgd->flags |= IEEE80211_STA_DISABLE_VHT | IEEE80211_STA_DISABLE_HE; rcu_read_unlock(); if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) && ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK), "U-APSD not supported with HW_PS_NULLFUNC_STACK\n")) sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD; if (bss->wmm_used && bss->uapsd_supported && (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) { assoc_data->uapsd = true; ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED; } else { assoc_data->uapsd = false; ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED; } if (req->prev_bssid) memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN); if (req->use_mfp) { ifmgd->mfp = IEEE80211_MFP_REQUIRED; ifmgd->flags |= IEEE80211_STA_MFP_ENABLED; } else { ifmgd->mfp = IEEE80211_MFP_DISABLED; ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED; } if (req->flags & ASSOC_REQ_USE_RRM) ifmgd->flags |= IEEE80211_STA_ENABLE_RRM; else ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM; if (req->crypto.control_port) ifmgd->flags |= IEEE80211_STA_CONTROL_PORT; else ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT; sdata->control_port_protocol = req->crypto.control_port_ethertype; sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt; sdata->control_port_over_nl80211 = req->crypto.control_port_over_nl80211; sdata->control_port_no_preauth = req->crypto.control_port_no_preauth; sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto, sdata->vif.type); /* kick off associate process */ ifmgd->assoc_data = assoc_data; ifmgd->dtim_period = 0; ifmgd->have_beacon = false; /* override HT/VHT configuration only if the AP and we support it */ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) { struct ieee80211_sta_ht_cap sta_ht_cap; if (req->flags & ASSOC_REQ_DISABLE_HT) override = true; memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap)); ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap); /* check for 40 MHz disable override */ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ) && sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 && !(sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) override = true; if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && req->flags & ASSOC_REQ_DISABLE_VHT) override = true; } if (req->flags & ASSOC_REQ_DISABLE_HT) { ifmgd->flags |= IEEE80211_STA_DISABLE_HT; ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; ifmgd->flags |= IEEE80211_STA_DISABLE_HE; } if (req->flags & ASSOC_REQ_DISABLE_VHT) ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; err = ieee80211_prep_connection(sdata, req->bss, true, override); if (err) goto err_clear; rcu_read_lock(); beacon_ies = rcu_dereference(req->bss->beacon_ies); if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC) && !beacon_ies) { /* * Wait up to one beacon interval ... * should this be more if we miss one? */ sdata_info(sdata, "waiting for beacon from %pM\n", ifmgd->bssid); assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval); assoc_data->timeout_started = true; assoc_data->need_beacon = true; } else if (beacon_ies) { const struct element *elem; u8 dtim_count = 0; ieee80211_get_dtim(beacon_ies, &dtim_count, &ifmgd->dtim_period); ifmgd->have_beacon = true; assoc_data->timeout = jiffies; assoc_data->timeout_started = true; if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) { sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf; sdata->vif.bss_conf.sync_device_ts = bss->device_ts_beacon; sdata->vif.bss_conf.sync_dtim_count = dtim_count; } elem = cfg80211_find_ext_elem(WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION, beacon_ies->data, beacon_ies->len); if (elem && elem->datalen >= 3) sdata->vif.bss_conf.profile_periodicity = elem->data[2]; elem = cfg80211_find_elem(WLAN_EID_EXT_CAPABILITY, beacon_ies->data, beacon_ies->len); if (elem && elem->datalen >= 11 && (elem->data[10] & WLAN_EXT_CAPA11_EMA_SUPPORT)) sdata->vif.bss_conf.ema_ap = true; } else { assoc_data->timeout = jiffies; assoc_data->timeout_started = true; } rcu_read_unlock(); run_again(sdata, assoc_data->timeout); if (bss->corrupt_data) { char *corrupt_type = "data"; if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) { if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP) corrupt_type = "beacon and probe response"; else corrupt_type = "beacon"; } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP) corrupt_type = "probe response"; sdata_info(sdata, "associating with AP with corrupt %s\n", corrupt_type); } return 0; err_clear: eth_zero_addr(ifmgd->bssid); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); ifmgd->assoc_data = NULL; err_free: kfree(assoc_data); return err; } int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, struct cfg80211_deauth_request *req) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; bool tx = !req->local_state_change; if (ifmgd->auth_data && ether_addr_equal(ifmgd->auth_data->bss->bssid, req->bssid)) { sdata_info(sdata, "aborting authentication with %pM by local choice (Reason: %u=%s)\n", req->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code)); drv_mgd_prepare_tx(sdata->local, sdata, 0); ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid, IEEE80211_STYPE_DEAUTH, req->reason_code, tx, frame_buf); ieee80211_destroy_auth_data(sdata, false); ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, req->reason_code); return 0; } if (ifmgd->assoc_data && ether_addr_equal(ifmgd->assoc_data->bss->bssid, req->bssid)) { sdata_info(sdata, "aborting association with %pM by local choice (Reason: %u=%s)\n", req->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code)); drv_mgd_prepare_tx(sdata->local, sdata, 0); ieee80211_send_deauth_disassoc(sdata, req->bssid, req->bssid, IEEE80211_STYPE_DEAUTH, req->reason_code, tx, frame_buf); ieee80211_destroy_assoc_data(sdata, false, true); ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, req->reason_code); return 0; } if (ifmgd->associated && ether_addr_equal(ifmgd->associated->bssid, req->bssid)) { sdata_info(sdata, "deauthenticating from %pM by local choice (Reason: %u=%s)\n", req->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code)); ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, req->reason_code, tx, frame_buf); ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, req->reason_code); return 0; } return -ENOTCONN; } int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, struct cfg80211_disassoc_request *req) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 bssid[ETH_ALEN]; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; /* * cfg80211 should catch this ... but it's racy since * we can receive a disassoc frame, process it, hand it * to cfg80211 while that's in a locked section already * trying to tell us that the user wants to disconnect. */ if (ifmgd->associated != req->bss) return -ENOLINK; sdata_info(sdata, "disassociating from %pM by local choice (Reason: %u=%s)\n", req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code)); memcpy(bssid, req->bss->bssid, ETH_ALEN); ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC, req->reason_code, !req->local_state_change, frame_buf); ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true, req->reason_code); return 0; } void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; /* * Make sure some work items will not run after this, * they will not do anything but might not have been * cancelled when disconnecting. */ cancel_work_sync(&ifmgd->monitor_work); cancel_work_sync(&ifmgd->beacon_connection_loss_work); cancel_work_sync(&ifmgd->request_smps_work); cancel_work_sync(&ifmgd->csa_connection_drop_work); cancel_work_sync(&ifmgd->chswitch_work); cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work); sdata_lock(sdata); if (ifmgd->assoc_data) { struct cfg80211_bss *bss = ifmgd->assoc_data->bss; ieee80211_destroy_assoc_data(sdata, false, false); cfg80211_assoc_timeout(sdata->dev, bss); } if (ifmgd->auth_data) ieee80211_destroy_auth_data(sdata, false); spin_lock_bh(&ifmgd->teardown_lock); if (ifmgd->teardown_skb) { kfree_skb(ifmgd->teardown_skb); ifmgd->teardown_skb = NULL; ifmgd->orig_teardown_skb = NULL; } kfree(ifmgd->assoc_req_ies); ifmgd->assoc_req_ies = NULL; ifmgd->assoc_req_ies_len = 0; spin_unlock_bh(&ifmgd->teardown_lock); del_timer_sync(&ifmgd->timer); sdata_unlock(sdata); } void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, enum nl80211_cqm_rssi_threshold_event rssi_event, s32 rssi_level, gfp_t gfp) { struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); trace_api_cqm_rssi_notify(sdata, rssi_event, rssi_level); cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, rssi_level, gfp); } EXPORT_SYMBOL(ieee80211_cqm_rssi_notify); void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp) { struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); trace_api_cqm_beacon_loss_notify(sdata->local, sdata); cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp); } EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify);