/* SPDX-License-Identifier: GPL-2.0+ */ /* * ipmi_smi.h * * MontaVista IPMI system management interface * * Author: MontaVista Software, Inc. * Corey Minyard <minyard@mvista.com> * source@mvista.com * * Copyright 2002 MontaVista Software Inc. * */ #ifndef __LINUX_IPMI_SMI_H #define __LINUX_IPMI_SMI_H #include <linux/ipmi_msgdefs.h> #include <linux/proc_fs.h> #include <linux/platform_device.h> #include <linux/ipmi.h> struct device; /* * This files describes the interface for IPMI system management interface * drivers to bind into the IPMI message handler. */ /* Structure for the low-level drivers. */ struct ipmi_smi; /* * Flags for set_check_watch() below. Tells if the SMI should be * waiting for watchdog timeouts, commands and/or messages. */ #define IPMI_WATCH_MASK_CHECK_MESSAGES (1 << 0) #define IPMI_WATCH_MASK_CHECK_WATCHDOG (1 << 1) #define IPMI_WATCH_MASK_CHECK_COMMANDS (1 << 2) /* * Messages to/from the lower layer. The smi interface will take one * of these to send. After the send has occurred and a response has * been received, it will report this same data structure back up to * the upper layer. If an error occurs, it should fill in the * response with an error code in the completion code location. When * asynchronous data is received, one of these is allocated, the * data_size is set to zero and the response holds the data from the * get message or get event command that the interface initiated. * Note that it is the interfaces responsibility to detect * asynchronous data and messages and request them from the * interface. */ struct ipmi_smi_msg { struct list_head link; long msgid; void *user_data; int data_size; unsigned char data[IPMI_MAX_MSG_LENGTH]; int rsp_size; unsigned char rsp[IPMI_MAX_MSG_LENGTH]; /* * Will be called when the system is done with the message * (presumably to free it). */ void (*done)(struct ipmi_smi_msg *msg); }; struct ipmi_smi_handlers { struct module *owner; /* * The low-level interface cannot start sending messages to * the upper layer until this function is called. This may * not be NULL, the lower layer must take the interface from * this call. */ int (*start_processing)(void *send_info, struct ipmi_smi *new_intf); /* * When called, the low-level interface should disable all * processing, it should be complete shut down when it returns. */ void (*shutdown)(void *send_info); /* * Get the detailed private info of the low level interface and store * it into the structure of ipmi_smi_data. For example: the * ACPI device handle will be returned for the pnp_acpi IPMI device. */ int (*get_smi_info)(void *send_info, struct ipmi_smi_info *data); /* * Called to enqueue an SMI message to be sent. This * operation is not allowed to fail. If an error occurs, it * should report back the error in a received message. It may * do this in the current call context, since no write locks * are held when this is run. Message are delivered one at * a time by the message handler, a new message will not be * delivered until the previous message is returned. */ void (*sender)(void *send_info, struct ipmi_smi_msg *msg); /* * Called by the upper layer to request that we try to get * events from the BMC we are attached to. */ void (*request_events)(void *send_info); /* * Called by the upper layer when some user requires that the * interface watch for received messages and watchdog * pretimeouts (basically do a "Get Flags", or not. Used by * the SMI to know if it should watch for these. This may be * NULL if the SMI does not implement it. watch_mask is from * IPMI_WATCH_MASK_xxx above. The interface should run slower * timeouts for just watchdog checking or faster timeouts when * waiting for the message queue. */ void (*set_need_watch)(void *send_info, unsigned int watch_mask); /* * Called when flushing all pending messages. */ void (*flush_messages)(void *send_info); /* * Called when the interface should go into "run to * completion" mode. If this call sets the value to true, the * interface should make sure that all messages are flushed * out and that none are pending, and any new requests are run * to completion immediately. */ void (*set_run_to_completion)(void *send_info, bool run_to_completion); /* * Called to poll for work to do. This is so upper layers can * poll for operations during things like crash dumps. */ void (*poll)(void *send_info); /* * Enable/disable firmware maintenance mode. Note that this * is *not* the modes defined, this is simply an on/off * setting. The message handler does the mode handling. Note * that this is called from interrupt context, so it cannot * block. */ void (*set_maintenance_mode)(void *send_info, bool enable); }; struct ipmi_device_id { unsigned char device_id; unsigned char device_revision; unsigned char firmware_revision_1; unsigned char firmware_revision_2; unsigned char ipmi_version; unsigned char additional_device_support; unsigned int manufacturer_id; unsigned int product_id; unsigned char aux_firmware_revision[4]; unsigned int aux_firmware_revision_set : 1; }; #define ipmi_version_major(v) ((v)->ipmi_version & 0xf) #define ipmi_version_minor(v) ((v)->ipmi_version >> 4) /* * Take a pointer to an IPMI response and extract device id information from * it. @netfn is in the IPMI_NETFN_ format, so may need to be shifted from * a SI response. */ static inline int ipmi_demangle_device_id(uint8_t netfn, uint8_t cmd, const unsigned char *data, unsigned int data_len, struct ipmi_device_id *id) { if (data_len < 7) return -EINVAL; if (netfn != IPMI_NETFN_APP_RESPONSE || cmd != IPMI_GET_DEVICE_ID_CMD) /* Strange, didn't get the response we expected. */ return -EINVAL; if (data[0] != 0) /* That's odd, it shouldn't be able to fail. */ return -EINVAL; data++; data_len--; id->device_id = data[0]; id->device_revision = data[1]; id->firmware_revision_1 = data[2]; id->firmware_revision_2 = data[3]; id->ipmi_version = data[4]; id->additional_device_support = data[5]; if (data_len >= 11) { id->manufacturer_id = (data[6] | (data[7] << 8) | (data[8] << 16)); id->product_id = data[9] | (data[10] << 8); } else { id->manufacturer_id = 0; id->product_id = 0; } if (data_len >= 15) { memcpy(id->aux_firmware_revision, data+11, 4); id->aux_firmware_revision_set = 1; } else id->aux_firmware_revision_set = 0; return 0; } /* * Add a low-level interface to the IPMI driver. Note that if the * interface doesn't know its slave address, it should pass in zero. * The low-level interface should not deliver any messages to the * upper layer until the start_processing() function in the handlers * is called, and the lower layer must get the interface from that * call. */ int ipmi_add_smi(struct module *owner, const struct ipmi_smi_handlers *handlers, void *send_info, struct device *dev, unsigned char slave_addr); #define ipmi_register_smi(handlers, send_info, dev, slave_addr) \ ipmi_add_smi(THIS_MODULE, handlers, send_info, dev, slave_addr) /* * Remove a low-level interface from the IPMI driver. This will * return an error if the interface is still in use by a user. */ void ipmi_unregister_smi(struct ipmi_smi *intf); /* * The lower layer reports received messages through this interface. * The data_size should be zero if this is an asynchronous message. If * the lower layer gets an error sending a message, it should format * an error response in the message response. */ void ipmi_smi_msg_received(struct ipmi_smi *intf, struct ipmi_smi_msg *msg); /* The lower layer received a watchdog pre-timeout on interface. */ void ipmi_smi_watchdog_pretimeout(struct ipmi_smi *intf); struct ipmi_smi_msg *ipmi_alloc_smi_msg(void); static inline void ipmi_free_smi_msg(struct ipmi_smi_msg *msg) { msg->done(msg); } #endif /* __LINUX_IPMI_SMI_H */