/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _LINUX_BRCMPHY_H #define _LINUX_BRCMPHY_H #include /* All Broadcom Ethernet switches have a pseudo-PHY at address 30 which is used * to configure the switch internal registers via MDIO accesses. */ #define BRCM_PSEUDO_PHY_ADDR 30 #define PHY_ID_BCM50610 0x0143bd60 #define PHY_ID_BCM50610M 0x0143bd70 #define PHY_ID_BCM5221 0x004061e0 #define PHY_ID_BCM5241 0x0143bc30 #define PHY_ID_BCMAC131 0x0143bc70 #define PHY_ID_BCM5481 0x0143bca0 #define PHY_ID_BCM5395 0x0143bcf0 #define PHY_ID_BCM53125 0x03625f20 #define PHY_ID_BCM53128 0x03625e10 #define PHY_ID_BCM54810 0x03625d00 #define PHY_ID_BCM54811 0x03625cc0 #define PHY_ID_BCM5482 0x0143bcb0 #define PHY_ID_BCM5411 0x00206070 #define PHY_ID_BCM5421 0x002060e0 #define PHY_ID_BCM54210E 0x600d84a0 #define PHY_ID_BCM5464 0x002060b0 #define PHY_ID_BCM5461 0x002060c0 #define PHY_ID_BCM54612E 0x03625e60 #define PHY_ID_BCM54616S 0x03625d10 #define PHY_ID_BCM54140 0xae025009 #define PHY_ID_BCM57780 0x03625d90 #define PHY_ID_BCM89610 0x03625cd0 #define PHY_ID_BCM72113 0x35905310 #define PHY_ID_BCM72116 0x35905350 #define PHY_ID_BCM72165 0x35905340 #define PHY_ID_BCM7250 0xae025280 #define PHY_ID_BCM7255 0xae025120 #define PHY_ID_BCM7260 0xae025190 #define PHY_ID_BCM7268 0xae025090 #define PHY_ID_BCM7271 0xae0253b0 #define PHY_ID_BCM7278 0xae0251a0 #define PHY_ID_BCM7364 0xae025260 #define PHY_ID_BCM7366 0x600d8490 #define PHY_ID_BCM7346 0x600d8650 #define PHY_ID_BCM7362 0x600d84b0 #define PHY_ID_BCM74165 0x359052c0 #define PHY_ID_BCM7425 0x600d86b0 #define PHY_ID_BCM7429 0x600d8730 #define PHY_ID_BCM7435 0x600d8750 #define PHY_ID_BCM74371 0xae0252e0 #define PHY_ID_BCM7439 0x600d8480 #define PHY_ID_BCM7439_2 0xae025080 #define PHY_ID_BCM7445 0x600d8510 #define PHY_ID_BCM7712 0x35905330 #define PHY_ID_BCM_CYGNUS 0xae025200 #define PHY_ID_BCM_OMEGA 0xae025100 #define PHY_BCM_OUI_MASK 0xfffffc00 #define PHY_BCM_OUI_1 0x00206000 #define PHY_BCM_OUI_2 0x0143bc00 #define PHY_BCM_OUI_3 0x03625c00 #define PHY_BCM_OUI_4 0x600d8400 #define PHY_BCM_OUI_5 0x03625e00 #define PHY_BCM_OUI_6 0xae025000 #define PHY_BRCM_AUTO_PWRDWN_ENABLE 0x00000001 #define PHY_BRCM_RX_REFCLK_UNUSED 0x00000002 #define PHY_BRCM_CLEAR_RGMII_MODE 0x00000004 #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00000008 #define PHY_BRCM_EN_MASTER_MODE 0x00000010 #define PHY_BRCM_IDDQ_SUSPEND 0x00000020 /* Broadcom BCM7xxx specific workarounds */ #define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff) #define PHY_BRCM_7XXX_PATCH(x) ((x) & 0xff) #define PHY_BCM_FLAGS_VALID 0x80000000 /* Broadcom BCM54XX register definitions, common to most Broadcom PHYs */ #define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */ #define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */ #define MII_BCM54XX_ECR_IF 0x0800 /* Interrupt force */ #define MII_BCM54XX_ECR_FIFOE 0x0001 /* FIFO elasticity */ #define MII_BCM54XX_ESR 0x11 /* BCM54xx extended status register */ #define MII_BCM54XX_ESR_IS 0x1000 /* Interrupt status */ #define MII_BCM54XX_EXP_DATA 0x15 /* Expansion register data */ #define MII_BCM54XX_EXP_SEL 0x17 /* Expansion register select */ #define MII_BCM54XX_EXP_SEL_TOP 0x0d00 /* TOP_MISC expansion register select */ #define MII_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */ #define MII_BCM54XX_EXP_SEL_WOL 0x0e00 /* Wake-on-LAN expansion select register */ #define MII_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */ #define MII_BCM54XX_EXP_SEL_ETC 0x0d00 /* Expansion register spare + 2k mem */ #define MII_BCM54XX_AUX_CTL 0x18 /* Auxiliary control register */ #define MII_BCM54XX_ISR 0x1a /* BCM54xx interrupt status register */ #define MII_BCM54XX_IMR 0x1b /* BCM54xx interrupt mask register */ #define MII_BCM54XX_INT_CRCERR 0x0001 /* CRC error */ #define MII_BCM54XX_INT_LINK 0x0002 /* Link status changed */ #define MII_BCM54XX_INT_SPEED 0x0004 /* Link speed change */ #define MII_BCM54XX_INT_DUPLEX 0x0008 /* Duplex mode changed */ #define MII_BCM54XX_INT_LRS 0x0010 /* Local receiver status changed */ #define MII_BCM54XX_INT_RRS 0x0020 /* Remote receiver status changed */ #define MII_BCM54XX_INT_SSERR 0x0040 /* Scrambler synchronization error */ #define MII_BCM54XX_INT_UHCD 0x0080 /* Unsupported HCD negotiated */ #define MII_BCM54XX_INT_NHCD 0x0100 /* No HCD */ #define MII_BCM54XX_INT_NHCDL 0x0200 /* No HCD link */ #define MII_BCM54XX_INT_ANPR 0x0400 /* Auto-negotiation page received */ #define MII_BCM54XX_INT_LC 0x0800 /* All counters below 128 */ #define MII_BCM54XX_INT_HC 0x1000 /* Counter above 32768 */ #define MII_BCM54XX_INT_MDIX 0x2000 /* MDIX status change */ #define MII_BCM54XX_INT_PSERR 0x4000 /* Pair swap error */ #define MII_BCM54XX_SHD 0x1c /* 0x1c shadow registers */ #define MII_BCM54XX_SHD_WRITE 0x8000 #define MII_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10) #define MII_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0) #define MII_BCM54XX_RDB_ADDR 0x1e #define MII_BCM54XX_RDB_DATA 0x1f /* legacy access control via rdb/expansion register */ #define BCM54XX_RDB_REG0087 0x0087 #define BCM54XX_EXP_REG7E (MII_BCM54XX_EXP_SEL_ER + 0x7E) #define BCM54XX_ACCESS_MODE_LEGACY_EN BIT(15) /* * AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18) */ #define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x00 #define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400 #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800 #define MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN 0x4000 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN 0x0080 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN 0x0100 #define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 #define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 #define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12 #define MII_BCM54XX_AUXCTL_SHDWSEL_MASK 0x0007 /* * Broadcom LED source encodings. These are used in BCM5461, BCM5481, * BCM5482, and possibly some others. */ #define BCM_LED_SRC_LINKSPD1 0x0 #define BCM_LED_SRC_LINKSPD2 0x1 #define BCM_LED_SRC_XMITLED 0x2 #define BCM_LED_SRC_ACTIVITYLED 0x3 #define BCM_LED_SRC_FDXLED 0x4 #define BCM_LED_SRC_SLAVE 0x5 #define BCM_LED_SRC_INTR 0x6 #define BCM_LED_SRC_QUALITY 0x7 #define BCM_LED_SRC_RCVLED 0x8 #define BCM_LED_SRC_WIRESPEED 0x9 #define BCM_LED_SRC_MULTICOLOR1 0xa #define BCM_LED_SRC_OPENSHORT 0xb #define BCM_LED_SRC_OFF 0xe /* Tied high */ #define BCM_LED_SRC_ON 0xf /* Tied low */ #define BCM_LED_SRC_MASK GENMASK(3, 0) /* * Broadcom Multicolor LED configurations (expansion register 4) */ #define BCM_EXP_MULTICOLOR (MII_BCM54XX_EXP_SEL_ER + 0x04) #define BCM_LED_MULTICOLOR_IN_PHASE BIT(8) #define BCM_LED_MULTICOLOR_LINK_ACT 0x0 #define BCM_LED_MULTICOLOR_SPEED 0x1 #define BCM_LED_MULTICOLOR_ACT_FLASH 0x2 #define BCM_LED_MULTICOLOR_FDX 0x3 #define BCM_LED_MULTICOLOR_OFF 0x4 #define BCM_LED_MULTICOLOR_ON 0x5 #define BCM_LED_MULTICOLOR_ALT 0x6 #define BCM_LED_MULTICOLOR_FLASH 0x7 #define BCM_LED_MULTICOLOR_LINK 0x8 #define BCM_LED_MULTICOLOR_ACT 0x9 #define BCM_LED_MULTICOLOR_PROGRAM 0xa /* * BCM5482: Shadow registers * Shadow values go into bits [14:10] of register 0x1c to select a shadow * register to access. */ /* 00100: Reserved control register 2 */ #define BCM54XX_SHD_SCR2 0x04 #define BCM54XX_SHD_SCR2_WSPD_RTRY_DIS 0x100 #define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT 2 #define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET 2 #define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK 0x7 /* 00101: Spare Control Register 3 */ #define BCM54XX_SHD_SCR3 0x05 #define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001 #define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002 #define BCM54XX_SHD_SCR3_TRDDAPD 0x0004 #define BCM54XX_SHD_SCR3_RXCTXC_DIS 0x0100 /* 01010: Auto Power-Down */ #define BCM54XX_SHD_APD 0x0a #define BCM_APD_CLR_MASK 0xFE9F /* clear bits 5, 6 & 8 */ #define BCM54XX_SHD_APD_EN 0x0020 #define BCM_NO_ANEG_APD_EN 0x0060 /* bits 5 & 6 */ #define BCM_APD_SINGLELP_EN 0x0100 /* Bit 8 */ #define BCM54XX_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */ /* LED3 / ~LINKSPD[2] selector */ #define BCM54XX_SHD_LEDS_SHIFT(led) (4 * (led)) #define BCM54XX_SHD_LEDS1_LED3(src) ((src & 0xf) << 4) /* LED1 / ~LINKSPD[1] selector */ #define BCM54XX_SHD_LEDS1_LED1(src) ((src & 0xf) << 0) #define BCM54XX_SHD_LEDS2 0x0e /* 01110: LED Selector 2 */ #define BCM54XX_SHD_RGMII_MODE 0x0b /* 01011: RGMII Mode Selector */ #define BCM5482_SHD_SSD 0x14 /* 10100: Secondary SerDes control */ #define BCM5482_SHD_SSD_LEDM 0x0008 /* SSD LED Mode enable */ #define BCM5482_SHD_SSD_EN 0x0001 /* SSD enable */ /* 10011: SerDes 100-FX Control Register */ #define BCM54616S_SHD_100FX_CTRL 0x13 #define BCM54616S_100FX_MODE BIT(0) /* 100-FX SerDes Enable */ /* 11111: Mode Control Register */ #define BCM54XX_SHD_MODE 0x1f #define BCM54XX_SHD_INTF_SEL_MASK GENMASK(2, 1) /* INTERF_SEL[1:0] */ #define BCM54XX_SHD_INTF_SEL_RGMII 0x02 #define BCM54XX_SHD_INTF_SEL_SGMII 0x04 #define BCM54XX_SHD_INTF_SEL_GBIC 0x06 #define BCM54XX_SHD_MODE_1000BX BIT(0) /* Enable 1000-X registers */ /* * EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17) */ #define MII_BCM54XX_EXP_AADJ1CH0 0x001f #define MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN 0x0200 #define MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF 0x0100 #define MII_BCM54XX_EXP_AADJ1CH3 0x601f #define MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ 0x0002 #define MII_BCM54XX_EXP_EXP08 0x0F08 #define MII_BCM54XX_EXP_EXP08_RJCT_2MHZ 0x0001 #define MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE 0x0200 #define MII_BCM54XX_EXP_EXP08_FORCE_DAC_WAKE 0x0100 #define MII_BCM54XX_EXP_EXP75 0x0f75 #define MII_BCM54XX_EXP_EXP75_VDACCTRL 0x003c #define MII_BCM54XX_EXP_EXP75_CM_OSC 0x0001 #define MII_BCM54XX_EXP_EXP96 0x0f96 #define MII_BCM54XX_EXP_EXP96_MYST 0x0010 #define MII_BCM54XX_EXP_EXP97 0x0f97 #define MII_BCM54XX_EXP_EXP97_MYST 0x0c0c /* Top-MISC expansion registers */ #define BCM54XX_TOP_MISC_IDDQ_CTRL (MII_BCM54XX_EXP_SEL_TOP + 0x06) #define BCM54XX_TOP_MISC_IDDQ_LP (1 << 0) #define BCM54XX_TOP_MISC_IDDQ_SD (1 << 2) #define BCM54XX_TOP_MISC_IDDQ_SR (1 << 3) #define BCM54XX_TOP_MISC_LED_CTL (MII_BCM54XX_EXP_SEL_TOP + 0x0C) #define BCM54XX_LED4_SEL_INTR BIT(1) /* * BCM5482: Secondary SerDes registers */ #define BCM5482_SSD_1000BX_CTL 0x00 /* 1000BASE-X Control */ #define BCM5482_SSD_1000BX_CTL_PWRDOWN 0x0800 /* Power-down SSD */ #define BCM5482_SSD_SGMII_SLAVE 0x15 /* SGMII Slave Register */ #define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */ #define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */ /* BroadR-Reach LRE Registers. */ #define MII_BCM54XX_LRECR 0x00 /* LRE Control Register */ #define MII_BCM54XX_LRESR 0x01 /* LRE Status Register */ #define MII_BCM54XX_LREPHYSID1 0x02 /* LRE PHYS ID 1 */ #define MII_BCM54XX_LREPHYSID2 0x03 /* LRE PHYS ID 2 */ #define MII_BCM54XX_LREANAA 0x04 /* LDS Auto-Negotiation Advertised Ability */ #define MII_BCM54XX_LREANAC 0x05 /* LDS Auto-Negotiation Advertised Control */ #define MII_BCM54XX_LREANPT 0x06 /* LDS Ability Next Page Transmit */ #define MII_BCM54XX_LRELPA 0x07 /* LDS Link Partner Ability */ #define MII_BCM54XX_LRELPNPM 0x08 /* LDS Link Partner Next Page Message */ #define MII_BCM54XX_LRELPNPC 0x09 /* LDS Link Partner Next Page Control */ #define MII_BCM54XX_LRELDSE 0x0a /* LDS Expansion Register */ #define MII_BCM54XX_LREES 0x0f /* LRE Extended Status */ /* LRE control register. */ #define LRECR_RESET 0x8000 /* Reset to default state */ #define LRECR_LOOPBACK 0x4000 /* Internal Loopback */ #define LRECR_LDSRES 0x2000 /* Restart LDS Process */ #define LRECR_LDSEN 0x1000 /* LDS Enable */ #define LRECR_PDOWN 0x0800 /* Enable low power state */ #define LRECR_ISOLATE 0x0400 /* Isolate data paths from MII */ #define LRECR_SPEED100 0x0200 /* Select 100 Mbps */ #define LRECR_SPEED10 0x0000 /* Select 10 Mbps */ #define LRECR_4PAIRS 0x0020 /* Select 4 Pairs */ #define LRECR_2PAIRS 0x0010 /* Select 2 Pairs */ #define LRECR_1PAIR 0x0000 /* Select 1 Pair */ #define LRECR_MASTER 0x0008 /* Force Master when LDS disabled */ #define LRECR_SLAVE 0x0000 /* Force Slave when LDS disabled */ /* LRE status register. */ #define LRESR_100_1PAIR 0x2000 /* Can do 100Mbps 1 Pair */ #define LRESR_100_4PAIR 0x1000 /* Can do 100Mbps 4 Pairs */ #define LRESR_100_2PAIR 0x0800 /* Can do 100Mbps 2 Pairs */ #define LRESR_10_2PAIR 0x0400 /* Can do 10Mbps 2 Pairs */ #define LRESR_10_1PAIR 0x0200 /* Can do 10Mbps 1 Pair */ #define LRESR_ESTATEN 0x0100 /* Extended Status in R15 */ #define LRESR_RESV 0x0080 /* Unused... */ #define LRESR_MFPS 0x0040 /* Can suppress Management Frames Preamble */ #define LRESR_LDSCOMPLETE 0x0020 /* LDS Auto-negotiation complete */ #define LRESR_8023 0x0010 /* Has IEEE 802.3 Support */ #define LRESR_LDSABILITY 0x0008 /* LDS auto-negotiation capable */ #define LRESR_LSTATUS 0x0004 /* Link status */ #define LRESR_JCD 0x0002 /* Jabber detected */ #define LRESR_ERCAP 0x0001 /* Ext-reg capability */ /* LDS Auto-Negotiation Advertised Ability. */ #define LREANAA_PAUSE_ASYM 0x8000 /* Can pause asymmetrically */ #define LREANAA_PAUSE 0x4000 /* Can pause */ #define LREANAA_100_1PAIR 0x0020 /* Can do 100Mbps 1 Pair */ #define LREANAA_100_4PAIR 0x0010 /* Can do 100Mbps 4 Pair */ #define LREANAA_100_2PAIR 0x0008 /* Can do 100Mbps 2 Pair */ #define LREANAA_10_2PAIR 0x0004 /* Can do 10Mbps 2 Pair */ #define LREANAA_10_1PAIR 0x0002 /* Can do 10Mbps 1 Pair */ #define LRE_ADVERTISE_FULL (LREANAA_100_1PAIR | LREANAA_100_4PAIR | \ LREANAA_100_2PAIR | LREANAA_10_2PAIR | \ LREANAA_10_1PAIR) #define LRE_ADVERTISE_ALL LRE_ADVERTISE_FULL /* LDS Link Partner Ability. */ #define LRELPA_PAUSE_ASYM 0x8000 /* Supports asymmetric pause */ #define LRELPA_PAUSE 0x4000 /* Supports pause capability */ #define LRELPA_100_1PAIR 0x0020 /* 100Mbps 1 Pair capable */ #define LRELPA_100_4PAIR 0x0010 /* 100Mbps 4 Pair capable */ #define LRELPA_100_2PAIR 0x0008 /* 100Mbps 2 Pair capable */ #define LRELPA_10_2PAIR 0x0004 /* 10Mbps 2 Pair capable */ #define LRELPA_10_1PAIR 0x0002 /* 10Mbps 1 Pair capable */ /* LDS Expansion register. */ #define LDSE_DOWNGRADE 0x8000 /* Can do LDS Speed Downgrade */ #define LDSE_MASTER 0x4000 /* Master / Slave */ #define LDSE_PAIRS_MASK 0x3000 /* Pair Count Mask */ #define LDSE_PAIRS_SHIFT 12 #define LDSE_4PAIRS (2 << LDSE_PAIRS_SHIFT) /* 4 Pairs Connection */ #define LDSE_2PAIRS (1 << LDSE_PAIRS_SHIFT) /* 2 Pairs Connection */ #define LDSE_1PAIR (0 << LDSE_PAIRS_SHIFT) /* 1 Pair Connection */ #define LDSE_CABLEN_MASK 0x0FFF /* Cable Length Mask */ /* BCM54810 Registers */ #define BCM54810_EXP_BROADREACH_LRE_MISC_CTL (MII_BCM54XX_EXP_SEL_ER + 0x90) #define BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN (1 << 0) #define BCM54810_SHD_CLK_CTL 0x3 #define BCM54810_SHD_CLK_CTL_GTXCLK_EN (1 << 9) /* BCM54811 Registers */ #define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL (MII_BCM54XX_EXP_SEL_ER + 0x9A) /* Access Control Override Enable */ #define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL_EN BIT(15) /* Access Control Override Value */ #define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL_OVERRIDE_VAL BIT(14) /* Access Control Value */ #define BCM54811_EXP_BROADREACH_LRE_OVERLAY_CTL_VAL BIT(13) /* BCM54612E Registers */ #define BCM54612E_EXP_SPARE0 (MII_BCM54XX_EXP_SEL_ETC + 0x34) #define BCM54612E_LED4_CLK125OUT_EN (1 << 1) /* Wake-on-LAN registers */ #define BCM54XX_WOL_MAIN_CTL (MII_BCM54XX_EXP_SEL_WOL + 0x80) #define BCM54XX_WOL_EN BIT(0) #define BCM54XX_WOL_MODE_SINGLE_MPD 0 #define BCM54XX_WOL_MODE_SINGLE_MPDSEC 1 #define BCM54XX_WOL_MODE_DUAL 2 #define BCM54XX_WOL_MODE_SHIFT 1 #define BCM54XX_WOL_MODE_MASK 0x3 #define BCM54XX_WOL_MP_MSB_FF_EN BIT(3) #define BCM54XX_WOL_SECKEY_OPT_4B 0 #define BCM54XX_WOL_SECKEY_OPT_6B 1 #define BCM54XX_WOL_SECKEY_OPT_8B 2 #define BCM54XX_WOL_SECKEY_OPT_SHIFT 4 #define BCM54XX_WOL_SECKEY_OPT_MASK 0x3 #define BCM54XX_WOL_L2_TYPE_CHK BIT(6) #define BCM54XX_WOL_L4IPV4UDP_CHK BIT(7) #define BCM54XX_WOL_L4IPV6UDP_CHK BIT(8) #define BCM54XX_WOL_UDPPORT_CHK BIT(9) #define BCM54XX_WOL_CRC_CHK BIT(10) #define BCM54XX_WOL_SECKEY_MODE BIT(11) #define BCM54XX_WOL_RST BIT(12) #define BCM54XX_WOL_DIR_PKT_EN BIT(13) #define BCM54XX_WOL_MASK_MODE_DA_FF 0 #define BCM54XX_WOL_MASK_MODE_DA_MPD 1 #define BCM54XX_WOL_MASK_MODE_DA_ONLY 2 #define BCM54XX_WOL_MASK_MODE_MPD 3 #define BCM54XX_WOL_MASK_MODE_SHIFT 14 #define BCM54XX_WOL_MASK_MODE_MASK 0x3 #define BCM54XX_WOL_INNER_PROTO (MII_BCM54XX_EXP_SEL_WOL + 0x81) #define BCM54XX_WOL_OUTER_PROTO (MII_BCM54XX_EXP_SEL_WOL + 0x82) #define BCM54XX_WOL_OUTER_PROTO2 (MII_BCM54XX_EXP_SEL_WOL + 0x83) #define BCM54XX_WOL_MPD_DATA1(x) (MII_BCM54XX_EXP_SEL_WOL + 0x84 + (x)) #define BCM54XX_WOL_MPD_DATA2(x) (MII_BCM54XX_EXP_SEL_WOL + 0x87 + (x)) #define BCM54XX_WOL_SEC_KEY_8B (MII_BCM54XX_EXP_SEL_WOL + 0x8A) #define BCM54XX_WOL_MASK(x) (MII_BCM54XX_EXP_SEL_WOL + 0x8B + (x)) #define BCM54XX_SEC_KEY_STORE(x) (MII_BCM54XX_EXP_SEL_WOL + 0x8E) #define BCM54XX_WOL_SHARED_CNT (MII_BCM54XX_EXP_SEL_WOL + 0x92) #define BCM54XX_WOL_INT_MASK (MII_BCM54XX_EXP_SEL_WOL + 0x93) #define BCM54XX_WOL_PKT1 BIT(0) #define BCM54XX_WOL_PKT2 BIT(1) #define BCM54XX_WOL_DIR BIT(2) #define BCM54XX_WOL_ALL_INTRS (BCM54XX_WOL_PKT1 | \ BCM54XX_WOL_PKT2 | \ BCM54XX_WOL_DIR) #define BCM54XX_WOL_INT_STATUS (MII_BCM54XX_EXP_SEL_WOL + 0x94) /* BCM5221 Registers */ #define BCM5221_AEGSR 0x1C #define BCM5221_AEGSR_MDIX_STATUS BIT(13) #define BCM5221_AEGSR_MDIX_MAN_SWAP BIT(12) #define BCM5221_AEGSR_MDIX_DIS BIT(11) #define BCM5221_SHDW_AM4_EN_CLK_LPM BIT(2) #define BCM5221_SHDW_AM4_FORCE_LPM BIT(1) /*****************************************************************************/ /* Fast Ethernet Transceiver definitions. */ /*****************************************************************************/ #define MII_BRCM_FET_INTREG 0x1a /* Interrupt register */ #define MII_BRCM_FET_IR_MASK 0x0100 /* Mask all interrupts */ #define MII_BRCM_FET_IR_LINK_EN 0x0200 /* Link status change enable */ #define MII_BRCM_FET_IR_SPEED_EN 0x0400 /* Link speed change enable */ #define MII_BRCM_FET_IR_DUPLEX_EN 0x0800 /* Duplex mode change enable */ #define MII_BRCM_FET_IR_ENABLE 0x4000 /* Interrupt enable */ #define MII_BRCM_FET_BRCMTEST 0x1f /* Brcm test register */ #define MII_BRCM_FET_BT_SRE 0x0080 /* Shadow register enable */ /*** Shadow register definitions ***/ #define MII_BRCM_FET_SHDW_MISCCTRL 0x10 /* Shadow misc ctrl */ #define MII_BRCM_FET_SHDW_MC_FAME 0x4000 /* Force Auto MDIX enable */ #define MII_BRCM_FET_SHDW_AUXMODE4 0x1a /* Auxiliary mode 4 */ #define MII_BRCM_FET_SHDW_AM4_STANDBY 0x0008 /* Standby enable */ #define MII_BRCM_FET_SHDW_AM4_LED_MASK 0x0003 #define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001 #define MII_BRCM_FET_SHDW_AUXSTAT2 0x1b /* Auxiliary status 2 */ #define MII_BRCM_FET_SHDW_AS2_APDE 0x0020 /* Auto power down enable */ #define BRCM_CL45VEN_EEE_CONTROL 0x803d #define LPI_FEATURE_EN 0x8000 #define LPI_FEATURE_EN_DIG1000X 0x4000 #define BRCM_CL45VEN_EEE_LPI_CNT 0x803f /* Core register definitions*/ #define MII_BRCM_CORE_BASE12 0x12 #define MII_BRCM_CORE_BASE13 0x13 #define MII_BRCM_CORE_BASE14 0x14 #define MII_BRCM_CORE_BASE1E 0x1E #define MII_BRCM_CORE_EXPB0 0xB0 #define MII_BRCM_CORE_EXPB1 0xB1 /* Enhanced Cable Diagnostics */ #define BCM54XX_RDB_ECD_CTRL 0x2a0 #define BCM54XX_EXP_ECD_CTRL (MII_BCM54XX_EXP_SEL_ER + 0xc0) #define BCM54XX_ECD_CTRL_CABLE_TYPE_CAT3 1 /* CAT3 or worse */ #define BCM54XX_ECD_CTRL_CABLE_TYPE_CAT5 0 /* CAT5 or better */ #define BCM54XX_ECD_CTRL_CABLE_TYPE_MASK BIT(0) /* cable type */ #define BCM54XX_ECD_CTRL_INVALID BIT(3) /* invalid result */ #define BCM54XX_ECD_CTRL_UNIT_CM 0 /* centimeters */ #define BCM54XX_ECD_CTRL_UNIT_M 1 /* meters */ #define BCM54XX_ECD_CTRL_UNIT_MASK BIT(10) /* cable length unit */ #define BCM54XX_ECD_CTRL_IN_PROGRESS BIT(11) /* test in progress */ #define BCM54XX_ECD_CTRL_BREAK_LINK BIT(12) /* unconnect link * during test */ #define BCM54XX_ECD_CTRL_CROSS_SHORT_DIS BIT(13) /* disable inter-pair * short check */ #define BCM54XX_ECD_CTRL_RUN BIT(15) /* run immediate */ #define BCM54XX_RDB_ECD_FAULT_TYPE 0x2a1 #define BCM54XX_EXP_ECD_FAULT_TYPE (MII_BCM54XX_EXP_SEL_ER + 0xc1) #define BCM54XX_ECD_FAULT_TYPE_INVALID 0x0 #define BCM54XX_ECD_FAULT_TYPE_OK 0x1 #define BCM54XX_ECD_FAULT_TYPE_OPEN 0x2 #define BCM54XX_ECD_FAULT_TYPE_SAME_SHORT 0x3 /* short same pair */ #define BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT 0x4 /* short different pairs */ #define BCM54XX_ECD_FAULT_TYPE_BUSY 0x9 #define BCM54XX_ECD_FAULT_TYPE_PAIR_D_MASK GENMASK(3, 0) #define BCM54XX_ECD_FAULT_TYPE_PAIR_C_MASK GENMASK(7, 4) #define BCM54XX_ECD_FAULT_TYPE_PAIR_B_MASK GENMASK(11, 8) #define BCM54XX_ECD_FAULT_TYPE_PAIR_A_MASK GENMASK(15, 12) #define BCM54XX_ECD_PAIR_A_LENGTH_RESULTS 0x2a2 #define BCM54XX_ECD_PAIR_B_LENGTH_RESULTS 0x2a3 #define BCM54XX_ECD_PAIR_C_LENGTH_RESULTS 0x2a4 #define BCM54XX_ECD_PAIR_D_LENGTH_RESULTS 0x2a5 #define BCM54XX_RDB_ECD_PAIR_A_LENGTH_RESULTS 0x2a2 #define BCM54XX_EXP_ECD_PAIR_A_LENGTH_RESULTS (MII_BCM54XX_EXP_SEL_ER + 0xc2) #define BCM54XX_RDB_ECD_PAIR_B_LENGTH_RESULTS 0x2a3 #define BCM54XX_EXP_ECD_PAIR_B_LENGTH_RESULTS (MII_BCM54XX_EXP_SEL_ER + 0xc3) #define BCM54XX_RDB_ECD_PAIR_C_LENGTH_RESULTS 0x2a4 #define BCM54XX_EXP_ECD_PAIR_C_LENGTH_RESULTS (MII_BCM54XX_EXP_SEL_ER + 0xc4) #define BCM54XX_RDB_ECD_PAIR_D_LENGTH_RESULTS 0x2a5 #define BCM54XX_EXP_ECD_PAIR_D_LENGTH_RESULTS (MII_BCM54XX_EXP_SEL_ER + 0xc5) #define BCM54XX_ECD_LENGTH_RESULTS_INVALID 0xffff #endif /* _LINUX_BRCMPHY_H */