// SPDX-License-Identifier: GPL-2.0 /* * TI Bandgap temperature sensor driver for J72XX SoC Family * * Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/ */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define K3_VTM_DEVINFO_PWR0_OFFSET 0x4 #define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK 0xf0 #define K3_VTM_TMPSENS0_CTRL_OFFSET 0x300 #define K3_VTM_MISC_CTRL_OFFSET 0xc #define K3_VTM_TMPSENS_STAT_OFFSET 0x8 #define K3_VTM_ANYMAXT_OUTRG_ALERT_EN 0x1 #define K3_VTM_MISC_CTRL2_OFFSET 0x10 #define K3_VTM_TS_STAT_DTEMP_MASK 0x3ff #define K3_VTM_MAX_NUM_TS 8 #define K3_VTM_TMPSENS_CTRL_SOC BIT(5) #define K3_VTM_TMPSENS_CTRL_CLRZ BIT(6) #define K3_VTM_TMPSENS_CTRL_CLKON_REQ BIT(7) #define K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN BIT(11) #define K3_VTM_CORRECTION_TEMP_CNT 3 #define MINUS40CREF 5 #define PLUS30CREF 253 #define PLUS125CREF 730 #define PLUS150CREF 940 #define TABLE_SIZE 1024 #define MAX_TEMP 123000 #define COOL_DOWN_TEMP 105000 #define FACTORS_REDUCTION 13 static int *derived_table; static int compute_value(int index, const s64 *factors, int nr_factors, int reduction) { s64 value = 0; int i; for (i = 0; i < nr_factors; i++) value += factors[i] * int_pow(index, i); return (int)div64_s64(value, int_pow(10, reduction)); } static void init_table(int factors_size, int *table, const s64 *factors) { int i; for (i = 0; i < TABLE_SIZE; i++) table[i] = compute_value(i, factors, factors_size, FACTORS_REDUCTION); } /** * struct err_values - structure containing error/reference values * @refs: reference error values for -40C, 30C, 125C & 150C * @errs: Actual error values for -40C, 30C, 125C & 150C read from the efuse */ struct err_values { int refs[4]; int errs[4]; }; static void create_table_segments(struct err_values *err_vals, int seg, int *ref_table) { int m = 0, c, num, den, i, err, idx1, idx2, err1, err2, ref1, ref2; if (seg == 0) idx1 = 0; else idx1 = err_vals->refs[seg]; idx2 = err_vals->refs[seg + 1]; err1 = err_vals->errs[seg]; err2 = err_vals->errs[seg + 1]; ref1 = err_vals->refs[seg]; ref2 = err_vals->refs[seg + 1]; /* * Calculate the slope with adc values read from the register * as the y-axis param and err in adc value as x-axis param */ num = ref2 - ref1; den = err2 - err1; if (den) m = num / den; c = ref2 - m * err2; /* * Take care of divide by zero error if error values are same * Or when the slope is 0 */ if (den != 0 && m != 0) { for (i = idx1; i <= idx2; i++) { err = (i - c) / m; if (((i + err) < 0) || ((i + err) >= TABLE_SIZE)) continue; derived_table[i] = ref_table[i + err]; } } else { /* Constant error take care of divide by zero */ for (i = idx1; i <= idx2; i++) { if (((i + err1) < 0) || ((i + err1) >= TABLE_SIZE)) continue; derived_table[i] = ref_table[i + err1]; } } } static int prep_lookup_table(struct err_values *err_vals, int *ref_table) { int inc, i, seg; /* * Fill up the lookup table under 3 segments * region -40C to +30C * region +30C to +125C * region +125C to +150C */ for (seg = 0; seg < 3; seg++) create_table_segments(err_vals, seg, ref_table); /* Get to the first valid temperature */ i = 0; while (!derived_table[i]) i++; /* * Get to the last zero index and back fill the temperature for * sake of continuity */ if (i) { /* 300 milli celsius steps */ while (i--) derived_table[i] = derived_table[i + 1] - 300; } /* * Fill the last trailing 0s which are unfilled with increments of * 100 milli celsius till 1023 code */ i = TABLE_SIZE - 1; while (!derived_table[i]) i--; i++; inc = 1; while (i < TABLE_SIZE) { derived_table[i] = derived_table[i - 1] + inc * 100; i++; } return 0; } struct k3_thermal_data; struct k3_j72xx_bandgap { struct device *dev; void __iomem *base; void __iomem *cfg2_base; void __iomem *fuse_base; struct k3_thermal_data *ts_data[K3_VTM_MAX_NUM_TS]; }; /* common data structures */ struct k3_thermal_data { struct k3_j72xx_bandgap *bgp; u32 ctrl_offset; u32 stat_offset; }; static int two_cmp(int tmp, int mask) { tmp = ~(tmp); tmp &= mask; tmp += 1; /* Return negative value */ return (0 - tmp); } static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1, unsigned int s2) { int d01 = abs(s0 - s1); int d02 = abs(s0 - s2); int d12 = abs(s1 - s2); if (d01 <= d02 && d01 <= d12) return (s0 + s1) / 2; if (d02 <= d01 && d02 <= d12) return (s0 + s2) / 2; return (s1 + s2) / 2; } static inline int k3_bgp_read_temp(struct k3_thermal_data *devdata, int *temp) { struct k3_j72xx_bandgap *bgp; unsigned int dtemp, s0, s1, s2; bgp = devdata->bgp; /* * Errata is applicable for am654 pg 1.0 silicon/J7ES. There * is a variation of the order for certain degree centigrade on AM654. * Work around that by getting the average of two closest * readings out of three readings everytime we want to * report temperatures. * * Errata workaround. */ s0 = readl(bgp->base + devdata->stat_offset) & K3_VTM_TS_STAT_DTEMP_MASK; s1 = readl(bgp->base + devdata->stat_offset) & K3_VTM_TS_STAT_DTEMP_MASK; s2 = readl(bgp->base + devdata->stat_offset) & K3_VTM_TS_STAT_DTEMP_MASK; dtemp = vtm_get_best_value(s0, s1, s2); if (dtemp < 0 || dtemp >= TABLE_SIZE) return -EINVAL; *temp = derived_table[dtemp]; return 0; } /* Get temperature callback function for thermal zone */ static int k3_thermal_get_temp(struct thermal_zone_device *tz, int *temp) { return k3_bgp_read_temp(tz->devdata, temp); } static const struct thermal_zone_device_ops k3_of_thermal_ops = { .get_temp = k3_thermal_get_temp, }; static int k3_j72xx_bandgap_temp_to_adc_code(int temp) { int low = 0, high = TABLE_SIZE - 1, mid; if (temp > 160000 || temp < -50000) return -EINVAL; /* Binary search to find the adc code */ while (low < (high - 1)) { mid = (low + high) / 2; if (temp <= derived_table[mid]) high = mid; else low = mid; } return mid; } static void get_efuse_values(int id, struct k3_thermal_data *data, int *err, struct k3_j72xx_bandgap *bgp) { int i, tmp, pow; int ct_offsets[5][K3_VTM_CORRECTION_TEMP_CNT] = { { 0x0, 0x8, 0x4 }, { 0x0, 0x8, 0x4 }, { 0x0, -1, 0x4 }, { 0x0, 0xC, -1 }, { 0x0, 0xc, 0x8 } }; int ct_bm[5][K3_VTM_CORRECTION_TEMP_CNT] = { { 0x3f, 0x1fe000, 0x1ff }, { 0xfc0, 0x1fe000, 0x3fe00 }, { 0x3f000, 0x7f800000, 0x7fc0000 }, { 0xfc0000, 0x1fe0, 0x1f800000 }, { 0x3f000000, 0x1fe000, 0x1ff0 } }; for (i = 0; i < 3; i++) { /* Extract the offset value using bit-mask */ if (ct_offsets[id][i] == -1 && i == 1) { /* 25C offset Case of Sensor 2 split between 2 regs */ tmp = (readl(bgp->fuse_base + 0x8) & 0xE0000000) >> (29); tmp |= ((readl(bgp->fuse_base + 0xC) & 0x1F) << 3); pow = tmp & 0x80; } else if (ct_offsets[id][i] == -1 && i == 2) { /* 125C Case of Sensor 3 split between 2 regs */ tmp = (readl(bgp->fuse_base + 0x4) & 0xF8000000) >> (27); tmp |= ((readl(bgp->fuse_base + 0x8) & 0xF) << 5); pow = tmp & 0x100; } else { tmp = readl(bgp->fuse_base + ct_offsets[id][i]); tmp &= ct_bm[id][i]; tmp = tmp >> __ffs(ct_bm[id][i]); /* Obtain the sign bit pow*/ pow = ct_bm[id][i] >> __ffs(ct_bm[id][i]); pow += 1; pow /= 2; } /* Check for negative value */ if (tmp & pow) { /* 2's complement value */ tmp = two_cmp(tmp, ct_bm[id][i] >> __ffs(ct_bm[id][i])); } err[i] = tmp; } /* Err value for 150C is set to 0 */ err[i] = 0; } static void print_look_up_table(struct device *dev, int *ref_table) { int i; dev_dbg(dev, "The contents of derived array\n"); dev_dbg(dev, "Code Temperature\n"); for (i = 0; i < TABLE_SIZE; i++) dev_dbg(dev, "%d %d %d\n", i, derived_table[i], ref_table[i]); } struct k3_j72xx_bandgap_data { const bool has_errata_i2128; }; static int k3_j72xx_bandgap_probe(struct platform_device *pdev) { int ret = 0, cnt, val, id; int high_max, low_temp; struct resource *res; struct device *dev = &pdev->dev; struct k3_j72xx_bandgap *bgp; struct k3_thermal_data *data; bool workaround_needed = false; const struct k3_j72xx_bandgap_data *driver_data; struct thermal_zone_device *ti_thermal; int *ref_table; struct err_values err_vals; const s64 golden_factors[] = { -490019999999999936, 3251200000000000, -1705800000000, 603730000, -92627, }; const s64 pvt_wa_factors[] = { -415230000000000000, 3126600000000000, -1157800000000, }; bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL); if (!bgp) return -ENOMEM; bgp->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); bgp->base = devm_ioremap_resource(dev, res); if (IS_ERR(bgp->base)) return PTR_ERR(bgp->base); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); bgp->cfg2_base = devm_ioremap_resource(dev, res); if (IS_ERR(bgp->cfg2_base)) return PTR_ERR(bgp->cfg2_base); res = platform_get_resource(pdev, IORESOURCE_MEM, 2); bgp->fuse_base = devm_ioremap_resource(dev, res); if (IS_ERR(bgp->fuse_base)) return PTR_ERR(bgp->fuse_base); driver_data = of_device_get_match_data(dev); if (driver_data) workaround_needed = driver_data->has_errata_i2128; pm_runtime_enable(dev); ret = pm_runtime_get_sync(dev); if (ret < 0) { pm_runtime_put_noidle(dev); pm_runtime_disable(dev); return ret; } /* Get the sensor count in the VTM */ val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET); cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK; cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK); data = devm_kcalloc(bgp->dev, cnt, sizeof(*data), GFP_KERNEL); if (!data) { ret = -ENOMEM; goto err_alloc; } ref_table = kzalloc(sizeof(*ref_table) * TABLE_SIZE, GFP_KERNEL); if (!ref_table) { ret = -ENOMEM; goto err_alloc; } derived_table = devm_kzalloc(bgp->dev, sizeof(*derived_table) * TABLE_SIZE, GFP_KERNEL); if (!derived_table) { ret = -ENOMEM; goto err_free_ref_table; } /* Workaround not needed if bit30/bit31 is set even for J721e */ if (workaround_needed && (readl(bgp->fuse_base + 0x0) & 0xc0000000) == 0xc0000000) workaround_needed = false; dev_dbg(bgp->dev, "Work around %sneeded\n", workaround_needed ? "" : "not "); if (!workaround_needed) init_table(5, ref_table, golden_factors); else init_table(3, ref_table, pvt_wa_factors); /* Register the thermal sensors */ for (id = 0; id < cnt; id++) { data[id].bgp = bgp; data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET + id * 0x20; data[id].stat_offset = data[id].ctrl_offset + K3_VTM_TMPSENS_STAT_OFFSET; if (workaround_needed) { /* ref adc values for -40C, 30C & 125C respectively */ err_vals.refs[0] = MINUS40CREF; err_vals.refs[1] = PLUS30CREF; err_vals.refs[2] = PLUS125CREF; err_vals.refs[3] = PLUS150CREF; get_efuse_values(id, &data[id], err_vals.errs, bgp); } if (id == 0 && workaround_needed) prep_lookup_table(&err_vals, ref_table); else if (id == 0 && !workaround_needed) memcpy(derived_table, ref_table, TABLE_SIZE * 4); val = readl(data[id].bgp->cfg2_base + data[id].ctrl_offset); val |= (K3_VTM_TMPSENS_CTRL_MAXT_OUTRG_EN | K3_VTM_TMPSENS_CTRL_SOC | K3_VTM_TMPSENS_CTRL_CLRZ | BIT(4)); writel(val, data[id].bgp->cfg2_base + data[id].ctrl_offset); bgp->ts_data[id] = &data[id]; ti_thermal = devm_thermal_of_zone_register(bgp->dev, id, &data[id], &k3_of_thermal_ops); if (IS_ERR(ti_thermal)) { dev_err(bgp->dev, "thermal zone device is NULL\n"); ret = PTR_ERR(ti_thermal); goto err_free_ref_table; } } /* * Program TSHUT thresholds * Step 1: set the thresholds to ~123C and 105C WKUP_VTM_MISC_CTRL2 * Step 2: WKUP_VTM_TMPSENS_CTRL_j set the MAXT_OUTRG_EN bit * This is already taken care as per of init * Step 3: WKUP_VTM_MISC_CTRL set the ANYMAXT_OUTRG_ALERT_EN bit */ high_max = k3_j72xx_bandgap_temp_to_adc_code(MAX_TEMP); low_temp = k3_j72xx_bandgap_temp_to_adc_code(COOL_DOWN_TEMP); writel((low_temp << 16) | high_max, data[0].bgp->cfg2_base + K3_VTM_MISC_CTRL2_OFFSET); mdelay(100); writel(K3_VTM_ANYMAXT_OUTRG_ALERT_EN, data[0].bgp->cfg2_base + K3_VTM_MISC_CTRL_OFFSET); platform_set_drvdata(pdev, bgp); print_look_up_table(dev, ref_table); /* * Now that the derived_table has the appropriate look up values * Free up the ref_table */ kfree(ref_table); return 0; err_free_ref_table: kfree(ref_table); err_alloc: pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); return ret; } static int k3_j72xx_bandgap_remove(struct platform_device *pdev) { pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); return 0; } static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j721e_data = { .has_errata_i2128 = true, }; static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j7200_data = { .has_errata_i2128 = false, }; static const struct of_device_id of_k3_j72xx_bandgap_match[] = { { .compatible = "ti,j721e-vtm", .data = &k3_j72xx_bandgap_j721e_data, }, { .compatible = "ti,j7200-vtm", .data = &k3_j72xx_bandgap_j7200_data, }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, of_k3_j72xx_bandgap_match); static struct platform_driver k3_j72xx_bandgap_sensor_driver = { .probe = k3_j72xx_bandgap_probe, .remove = k3_j72xx_bandgap_remove, .driver = { .name = "k3-j72xx-soc-thermal", .of_match_table = of_k3_j72xx_bandgap_match, }, }; module_platform_driver(k3_j72xx_bandgap_sensor_driver); MODULE_DESCRIPTION("K3 bandgap temperature sensor driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("J Keerthy ");