/* * An SPI driver for the Philips PCF2123 RTC * Copyright 2009 Cyber Switching, Inc. * * Author: Chris Verges * Maintainers: http://www.cyberswitching.com * * based on the RS5C348 driver in this same directory. * * Thanks to Christian Pellegrin for * the sysfs contributions to this driver. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Please note that the CS is active high, so platform data * should look something like: * * static struct spi_board_info ek_spi_devices[] = { * ... * { * .modalias = "rtc-pcf2123", * .chip_select = 1, * .controller_data = (void *)AT91_PIN_PA10, * .max_speed_hz = 1000 * 1000, * .mode = SPI_CS_HIGH, * .bus_num = 0, * }, * ... *}; * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #define DRV_VERSION "0.6" /* REGISTERS */ #define PCF2123_REG_CTRL1 (0x00) /* Control Register 1 */ #define PCF2123_REG_CTRL2 (0x01) /* Control Register 2 */ #define PCF2123_REG_SC (0x02) /* datetime */ #define PCF2123_REG_MN (0x03) #define PCF2123_REG_HR (0x04) #define PCF2123_REG_DM (0x05) #define PCF2123_REG_DW (0x06) #define PCF2123_REG_MO (0x07) #define PCF2123_REG_YR (0x08) #define PCF2123_REG_ALRM_MN (0x09) /* Alarm Registers */ #define PCF2123_REG_ALRM_HR (0x0a) #define PCF2123_REG_ALRM_DM (0x0b) #define PCF2123_REG_ALRM_DW (0x0c) #define PCF2123_REG_OFFSET (0x0d) /* Clock Rate Offset Register */ #define PCF2123_REG_TMR_CLKOUT (0x0e) /* Timer Registers */ #define PCF2123_REG_CTDWN_TMR (0x0f) /* PCF2123_REG_CTRL1 BITS */ #define CTRL1_CLEAR (0) /* Clear */ #define CTRL1_CORR_INT BIT(1) /* Correction irq enable */ #define CTRL1_12_HOUR BIT(2) /* 12 hour time */ #define CTRL1_SW_RESET (BIT(3) | BIT(4) | BIT(6)) /* Software reset */ #define CTRL1_STOP BIT(5) /* Stop the clock */ #define CTRL1_EXT_TEST BIT(7) /* External clock test mode */ /* PCF2123_REG_CTRL2 BITS */ #define CTRL2_TIE BIT(0) /* Countdown timer irq enable */ #define CTRL2_AIE BIT(1) /* Alarm irq enable */ #define CTRL2_TF BIT(2) /* Countdown timer flag */ #define CTRL2_AF BIT(3) /* Alarm flag */ #define CTRL2_TI_TP BIT(4) /* Irq pin generates pulse */ #define CTRL2_MSF BIT(5) /* Minute or second irq flag */ #define CTRL2_SI BIT(6) /* Second irq enable */ #define CTRL2_MI BIT(7) /* Minute irq enable */ /* PCF2123_REG_SC BITS */ #define OSC_HAS_STOPPED BIT(7) /* Clock has been stopped */ /* PCF2123_REG_ALRM_XX BITS */ #define ALRM_ENABLE BIT(7) /* MN, HR, DM, or DW alarm enable */ /* PCF2123_REG_TMR_CLKOUT BITS */ #define CD_TMR_4096KHZ (0) /* 4096 KHz countdown timer */ #define CD_TMR_64HZ (1) /* 64 Hz countdown timer */ #define CD_TMR_1HZ (2) /* 1 Hz countdown timer */ #define CD_TMR_60th_HZ (3) /* 60th Hz countdown timer */ #define CD_TMR_TE BIT(3) /* Countdown timer enable */ /* PCF2123_REG_OFFSET BITS */ #define OFFSET_SIGN_BIT BIT(6) /* 2's complement sign bit */ #define OFFSET_COARSE BIT(7) /* Coarse mode offset */ /* READ/WRITE ADDRESS BITS */ #define PCF2123_WRITE BIT(4) #define PCF2123_READ (BIT(4) | BIT(7)) static struct spi_driver pcf2123_driver; struct pcf2123_sysfs_reg { struct device_attribute attr; char name[2]; }; struct pcf2123_plat_data { struct rtc_device *rtc; struct pcf2123_sysfs_reg regs[16]; }; /* * Causes a 30 nanosecond delay to ensure that the PCF2123 chip select * is released properly after an SPI write. This function should be * called after EVERY read/write call over SPI. */ static inline void pcf2123_delay_trec(void) { ndelay(30); } static int pcf2123_read(struct device *dev, u8 reg, u8 *rxbuf, size_t size) { struct spi_device *spi = to_spi_device(dev); int ret; reg |= PCF2123_READ; ret = spi_write_then_read(spi, ®, 1, rxbuf, size); pcf2123_delay_trec(); return ret; } static int pcf2123_write(struct device *dev, u8 *txbuf, size_t size) { struct spi_device *spi = to_spi_device(dev); int ret; txbuf[0] |= PCF2123_WRITE; ret = spi_write(spi, txbuf, size); pcf2123_delay_trec(); return ret; } static int pcf2123_write_reg(struct device *dev, u8 reg, u8 val) { u8 txbuf[2]; txbuf[0] = reg; txbuf[1] = val; return pcf2123_write(dev, txbuf, sizeof(txbuf)); } static ssize_t pcf2123_show(struct device *dev, struct device_attribute *attr, char *buffer) { struct pcf2123_sysfs_reg *r; u8 rxbuf[1]; unsigned long reg; int ret; r = container_of(attr, struct pcf2123_sysfs_reg, attr); ret = kstrtoul(r->name, 16, ®); if (ret) return ret; ret = pcf2123_read(dev, reg, rxbuf, 1); if (ret < 0) return -EIO; return sprintf(buffer, "0x%x\n", rxbuf[0]); } static ssize_t pcf2123_store(struct device *dev, struct device_attribute *attr, const char *buffer, size_t count) { struct pcf2123_sysfs_reg *r; unsigned long reg; unsigned long val; int ret; r = container_of(attr, struct pcf2123_sysfs_reg, attr); ret = kstrtoul(r->name, 16, ®); if (ret) return ret; ret = kstrtoul(buffer, 10, &val); if (ret) return ret; pcf2123_write_reg(dev, reg, val); if (ret < 0) return -EIO; return count; } static int pcf2123_rtc_read_time(struct device *dev, struct rtc_time *tm) { u8 rxbuf[7]; int ret; ret = pcf2123_read(dev, PCF2123_REG_SC, rxbuf, sizeof(rxbuf)); if (ret < 0) return ret; if (rxbuf[0] & OSC_HAS_STOPPED) { dev_info(dev, "clock was stopped. Time is not valid\n"); return -EINVAL; } tm->tm_sec = bcd2bin(rxbuf[0] & 0x7F); tm->tm_min = bcd2bin(rxbuf[1] & 0x7F); tm->tm_hour = bcd2bin(rxbuf[2] & 0x3F); /* rtc hr 0-23 */ tm->tm_mday = bcd2bin(rxbuf[3] & 0x3F); tm->tm_wday = rxbuf[4] & 0x07; tm->tm_mon = bcd2bin(rxbuf[5] & 0x1F) - 1; /* rtc mn 1-12 */ tm->tm_year = bcd2bin(rxbuf[6]); if (tm->tm_year < 70) tm->tm_year += 100; /* assume we are in 1970...2069 */ dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, " "mday=%d, mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); return rtc_valid_tm(tm); } static int pcf2123_rtc_set_time(struct device *dev, struct rtc_time *tm) { u8 txbuf[8]; int ret; dev_dbg(dev, "%s: tm is secs=%d, mins=%d, hours=%d, " "mday=%d, mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec, tm->tm_min, tm->tm_hour, tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday); /* Stop the counter first */ ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP); if (ret < 0) return ret; /* Set the new time */ txbuf[0] = PCF2123_REG_SC; txbuf[1] = bin2bcd(tm->tm_sec & 0x7F); txbuf[2] = bin2bcd(tm->tm_min & 0x7F); txbuf[3] = bin2bcd(tm->tm_hour & 0x3F); txbuf[4] = bin2bcd(tm->tm_mday & 0x3F); txbuf[5] = tm->tm_wday & 0x07; txbuf[6] = bin2bcd((tm->tm_mon + 1) & 0x1F); /* rtc mn 1-12 */ txbuf[7] = bin2bcd(tm->tm_year < 100 ? tm->tm_year : tm->tm_year - 100); ret = pcf2123_write(dev, txbuf, sizeof(txbuf)); if (ret < 0) return ret; /* Start the counter */ ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_CLEAR); if (ret < 0) return ret; return 0; } static int pcf2123_reset(struct device *dev) { int ret; u8 rxbuf[2]; ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_SW_RESET); if (ret < 0) return ret; /* Stop the counter */ dev_dbg(dev, "stopping RTC\n"); ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_STOP); if (ret < 0) return ret; /* See if the counter was actually stopped */ dev_dbg(dev, "checking for presence of RTC\n"); ret = pcf2123_read(dev, PCF2123_REG_CTRL1, rxbuf, sizeof(rxbuf)); if (ret < 0) return ret; dev_dbg(dev, "received data from RTC (0x%02X 0x%02X)\n", rxbuf[0], rxbuf[1]); if (!(rxbuf[0] & CTRL1_STOP)) return -ENODEV; /* Start the counter */ ret = pcf2123_write_reg(dev, PCF2123_REG_CTRL1, CTRL1_CLEAR); if (ret < 0) return ret; return 0; } static const struct rtc_class_ops pcf2123_rtc_ops = { .read_time = pcf2123_rtc_read_time, .set_time = pcf2123_rtc_set_time, }; static int pcf2123_probe(struct spi_device *spi) { struct rtc_device *rtc; struct rtc_time tm; struct pcf2123_plat_data *pdata; int ret, i; pdata = devm_kzalloc(&spi->dev, sizeof(struct pcf2123_plat_data), GFP_KERNEL); if (!pdata) return -ENOMEM; spi->dev.platform_data = pdata; ret = pcf2123_rtc_read_time(&spi->dev, &tm); if (ret < 0) { ret = pcf2123_reset(&spi->dev); if (ret < 0) { dev_err(&spi->dev, "chip not found\n"); goto kfree_exit; } } dev_info(&spi->dev, "chip found, driver version " DRV_VERSION "\n"); dev_info(&spi->dev, "spiclk %u KHz.\n", (spi->max_speed_hz + 500) / 1000); /* Finalize the initialization */ rtc = devm_rtc_device_register(&spi->dev, pcf2123_driver.driver.name, &pcf2123_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) { dev_err(&spi->dev, "failed to register.\n"); ret = PTR_ERR(rtc); goto kfree_exit; } pdata->rtc = rtc; for (i = 0; i < 16; i++) { sysfs_attr_init(&pdata->regs[i].attr.attr); sprintf(pdata->regs[i].name, "%1x", i); pdata->regs[i].attr.attr.mode = S_IRUGO | S_IWUSR; pdata->regs[i].attr.attr.name = pdata->regs[i].name; pdata->regs[i].attr.show = pcf2123_show; pdata->regs[i].attr.store = pcf2123_store; ret = device_create_file(&spi->dev, &pdata->regs[i].attr); if (ret) { dev_err(&spi->dev, "Unable to create sysfs %s\n", pdata->regs[i].name); goto sysfs_exit; } } return 0; sysfs_exit: for (i--; i >= 0; i--) device_remove_file(&spi->dev, &pdata->regs[i].attr); kfree_exit: spi->dev.platform_data = NULL; return ret; } static int pcf2123_remove(struct spi_device *spi) { struct pcf2123_plat_data *pdata = dev_get_platdata(&spi->dev); int i; if (pdata) { for (i = 0; i < 16; i++) if (pdata->regs[i].name[0]) device_remove_file(&spi->dev, &pdata->regs[i].attr); } return 0; } #ifdef CONFIG_OF static const struct of_device_id pcf2123_dt_ids[] = { { .compatible = "nxp,rtc-pcf2123", }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, pcf2123_dt_ids); #endif static struct spi_driver pcf2123_driver = { .driver = { .name = "rtc-pcf2123", .of_match_table = of_match_ptr(pcf2123_dt_ids), }, .probe = pcf2123_probe, .remove = pcf2123_remove, }; module_spi_driver(pcf2123_driver); MODULE_AUTHOR("Chris Verges "); MODULE_DESCRIPTION("NXP PCF2123 RTC driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION);