/****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called COPYING. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ #ifndef __fw_api_power_h__ #define __fw_api_power_h__ /* Power Management Commands, Responses, Notifications */ /** * enum iwl_scan_flags - masks for power table command flags * @POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off * receiver and transmitter. '0' - does not allow. * @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management, * '1' Driver enables PM (use rest of parameters) * @POWER_FLAGS_SKIP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM, * '1' PM could sleep over DTIM till listen Interval. * @POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask * @POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable. */ enum iwl_power_flags { POWER_FLAGS_POWER_SAVE_ENA_MSK = BIT(0), POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK = BIT(1), POWER_FLAGS_SKIP_OVER_DTIM_MSK = BIT(2), POWER_FLAGS_ADVANCE_PM_ENA_MSK = BIT(9), POWER_FLAGS_LPRX_ENA_MSK = BIT(11), }; #define IWL_POWER_VEC_SIZE 5 /** * struct iwl_powertable_cmd - Power Table Command * POWER_TABLE_CMD = 0x77 (command, has simple generic response) * * @flags: Power table command flags from POWER_FLAGS_* * @keep_alive_seconds: Keep alive period in seconds. Default - 25 sec. * Minimum allowed:- 3 * DTIM. Keep alive period must be * set regardless of power scheme or current power state. * FW use this value also when PM is disabled. * @rx_data_timeout: Minimum time (usec) from last Rx packet for AM to * PSM transition - legacy PM * @tx_data_timeout: Minimum time (usec) from last Tx packet for AM to * PSM transition - legacy PM * @sleep_interval: not in use * @skip_dtim_periods: Number of DTIM periods to skip if Skip over DTIM flag * is set. For example, if it is required to skip over * one DTIM, this value need to be set to 2 (DTIM periods). * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled. * Default: 80dbm */ struct iwl_powertable_cmd { /* PM_POWER_TABLE_CMD_API_S_VER_6 */ __le16 flags; u8 keep_alive_seconds; u8 debug_flags; __le32 rx_data_timeout; __le32 tx_data_timeout; __le32 sleep_interval[IWL_POWER_VEC_SIZE]; __le32 skip_dtim_periods; __le32 lprx_rssi_threshold; } __packed; /** * struct iwl_beacon_filter_cmd * REPLY_BEACON_FILTERING_CMD = 0xd2 (command) * @id_and_color: MAC contex identifier * @bf_energy_delta: Used for RSSI filtering, if in 'normal' state. Send beacon * to driver if delta in Energy values calculated for this and last * passed beacon is greater than this threshold. Zero value means that * the Energy change is ignored for beacon filtering, and beacon will * not be forced to be sent to driver regardless of this delta. Typical * energy delta 5dB. * @bf_roaming_energy_delta: Used for RSSI filtering, if in 'roaming' state. * Send beacon to driver if delta in Energy values calculated for this * and last passed beacon is greater than this threshold. Zero value * means that the Energy change is ignored for beacon filtering while in * Roaming state, typical energy delta 1dB. * @bf_roaming_state: Used for RSSI filtering. If absolute Energy values * calculated for current beacon is less than the threshold, use * Roaming Energy Delta Threshold, otherwise use normal Energy Delta * Threshold. Typical energy threshold is -72dBm. * @bf_temperature_delta: Send Beacon to driver if delta in temperature values * calculated for this and the last passed beacon is greater than this * threshold. Zero value means that the temperature changeis ignored for * beacon filtering; beacons will not be forced to be sent to driver * regardless of whether its temerature has been changed. * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled. * @bf_filter_escape_timer: Send beacons to to driver if no beacons were passed * for a specific period of time. Units: Beacons. * @ba_escape_timer: Fully receive and parse beacon if no beacons were passed * for a longer period of time then this escape-timeout. Units: Beacons. * @ba_enable_beacon_abort: 1, beacon abort is enabled; 0, disabled. */ struct iwl_beacon_filter_cmd { u8 bf_energy_delta; u8 bf_roaming_energy_delta; u8 bf_roaming_state; u8 bf_temperature_delta; u8 bf_enable_beacon_filter; u8 bf_debug_flag; __le16 reserved1; __le32 bf_escape_timer; __le32 ba_escape_timer; u8 ba_enable_beacon_abort; u8 reserved2[3]; } __packed; /* Beacon filtering and beacon abort */ #define IWL_BF_ENERGY_DELTA_DEFAULT 5 #define IWL_BF_ENERGY_DELTA_MAX 255 #define IWL_BF_ENERGY_DELTA_MIN 0 #define IWL_BF_ROAMING_ENERGY_DELTA_DEFAULT 1 #define IWL_BF_ROAMING_ENERGY_DELTA_MAX 255 #define IWL_BF_ROAMING_ENERGY_DELTA_MIN 0 #define IWL_BF_ROAMING_STATE_DEFAULT 72 #define IWL_BF_ROAMING_STATE_MAX 255 #define IWL_BF_ROAMING_STATE_MIN 0 #define IWL_BF_TEMPERATURE_DELTA_DEFAULT 5 #define IWL_BF_TEMPERATURE_DELTA_MAX 255 #define IWL_BF_TEMPERATURE_DELTA_MIN 0 #define IWL_BF_ENABLE_BEACON_FILTER_DEFAULT 1 #define IWL_BF_DEBUG_FLAG_DEFAULT 0 #define IWL_BF_ESCAPE_TIMER_DEFAULT 50 #define IWL_BF_ESCAPE_TIMER_MAX 1024 #define IWL_BF_ESCAPE_TIMER_MIN 0 #define IWL_BA_ESCAPE_TIMER_DEFAULT 3 #define IWL_BA_ESCAPE_TIMER_MAX 1024 #define IWL_BA_ESCAPE_TIMER_MIN 0 #define IWL_BA_ENABLE_BEACON_ABORT_DEFAULT 1 #define IWL_BF_CMD_CONFIG_DEFAULTS \ .bf_energy_delta = IWL_BF_ENERGY_DELTA_DEFAULT, \ .bf_roaming_energy_delta = IWL_BF_ROAMING_ENERGY_DELTA_DEFAULT, \ .bf_roaming_state = IWL_BF_ROAMING_STATE_DEFAULT, \ .bf_temperature_delta = IWL_BF_TEMPERATURE_DELTA_DEFAULT, \ .bf_debug_flag = IWL_BF_DEBUG_FLAG_DEFAULT, \ .bf_escape_timer = cpu_to_le32(IWL_BF_ESCAPE_TIMER_DEFAULT), \ .ba_escape_timer = cpu_to_le32(IWL_BA_ESCAPE_TIMER_DEFAULT) #endif