/* * Driver for the Conexant CX25821 PCIe bridge * * Copyright (C) 2009 Conexant Systems Inc. * Authors , * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include "cx25821-video.h" #include "cx25821-video-upstream.h" #include #include #include #include #include #include #include #include #include #include MODULE_DESCRIPTION("v4l2 driver module for cx25821 based TV cards"); MODULE_AUTHOR("Hiep Huynh "); MODULE_LICENSE("GPL"); static int _intr_msk = FLD_VID_SRC_RISC1 | FLD_VID_SRC_UF | FLD_VID_SRC_SYNC | FLD_VID_SRC_OPC_ERR; int cx25821_sram_channel_setup_upstream(struct cx25821_dev *dev, const struct sram_channel *ch, unsigned int bpl, u32 risc) { unsigned int i, lines; u32 cdt; if (ch->cmds_start == 0) { cx_write(ch->ptr1_reg, 0); cx_write(ch->ptr2_reg, 0); cx_write(ch->cnt2_reg, 0); cx_write(ch->cnt1_reg, 0); return 0; } bpl = (bpl + 7) & ~7; /* alignment */ cdt = ch->cdt; lines = ch->fifo_size / bpl; if (lines > 4) lines = 4; BUG_ON(lines < 2); /* write CDT */ for (i = 0; i < lines; i++) { cx_write(cdt + 16 * i, ch->fifo_start + bpl * i); cx_write(cdt + 16 * i + 4, 0); cx_write(cdt + 16 * i + 8, 0); cx_write(cdt + 16 * i + 12, 0); } /* write CMDS */ cx_write(ch->cmds_start + 0, risc); cx_write(ch->cmds_start + 4, 0); cx_write(ch->cmds_start + 8, cdt); cx_write(ch->cmds_start + 12, (lines * 16) >> 3); cx_write(ch->cmds_start + 16, ch->ctrl_start); cx_write(ch->cmds_start + 20, VID_IQ_SIZE_DW); for (i = 24; i < 80; i += 4) cx_write(ch->cmds_start + i, 0); /* fill registers */ cx_write(ch->ptr1_reg, ch->fifo_start); cx_write(ch->ptr2_reg, cdt); cx_write(ch->cnt2_reg, (lines * 16) >> 3); cx_write(ch->cnt1_reg, (bpl >> 3) - 1); return 0; } static __le32 *cx25821_update_riscprogram(struct cx25821_dev *dev, __le32 *rp, unsigned int offset, unsigned int bpl, u32 sync_line, unsigned int lines, int fifo_enable, int field_type) { unsigned int line, i; int dist_betwn_starts = bpl * 2; *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line); if (USE_RISC_NOOP_VIDEO) { for (i = 0; i < NUM_NO_OPS; i++) *(rp++) = cpu_to_le32(RISC_NOOP); } /* scan lines */ for (line = 0; line < lines; line++) { *(rp++) = cpu_to_le32(RISC_READ | RISC_SOL | RISC_EOL | bpl); *(rp++) = cpu_to_le32(dev->_data_buf_phys_addr + offset); *(rp++) = cpu_to_le32(0); /* bits 63-32 */ if ((lines <= NTSC_FIELD_HEIGHT) || (line < (NTSC_FIELD_HEIGHT - 1)) || !(dev->_isNTSC)) { offset += dist_betwn_starts; } } return rp; } static __le32 *cx25821_risc_field_upstream(struct cx25821_dev *dev, __le32 * rp, dma_addr_t databuf_phys_addr, unsigned int offset, u32 sync_line, unsigned int bpl, unsigned int lines, int fifo_enable, int field_type) { unsigned int line, i; const struct sram_channel *sram_ch = dev->channels[dev->_channel_upstream_select].sram_channels; int dist_betwn_starts = bpl * 2; /* sync instruction */ if (sync_line != NO_SYNC_LINE) *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line); if (USE_RISC_NOOP_VIDEO) { for (i = 0; i < NUM_NO_OPS; i++) *(rp++) = cpu_to_le32(RISC_NOOP); } /* scan lines */ for (line = 0; line < lines; line++) { *(rp++) = cpu_to_le32(RISC_READ | RISC_SOL | RISC_EOL | bpl); *(rp++) = cpu_to_le32(databuf_phys_addr + offset); *(rp++) = cpu_to_le32(0); /* bits 63-32 */ if ((lines <= NTSC_FIELD_HEIGHT) || (line < (NTSC_FIELD_HEIGHT - 1)) || !(dev->_isNTSC)) /* to skip the other field line */ offset += dist_betwn_starts; /* check if we need to enable the FIFO after the first 4 lines * For the upstream video channel, the risc engine will enable * the FIFO. */ if (fifo_enable && line == 3) { *(rp++) = RISC_WRITECR; *(rp++) = sram_ch->dma_ctl; *(rp++) = FLD_VID_FIFO_EN; *(rp++) = 0x00000001; } } return rp; } static int cx25821_risc_buffer_upstream(struct cx25821_dev *dev, struct pci_dev *pci, unsigned int top_offset, unsigned int bpl, unsigned int lines) { __le32 *rp; int fifo_enable = 0; /* get line count for single field */ int singlefield_lines = lines >> 1; int odd_num_lines = singlefield_lines; int frame = 0; int frame_size = 0; int databuf_offset = 0; int risc_program_size = 0; int risc_flag = RISC_CNT_RESET; unsigned int bottom_offset = bpl; dma_addr_t risc_phys_jump_addr; if (dev->_isNTSC) { odd_num_lines = singlefield_lines + 1; risc_program_size = FRAME1_VID_PROG_SIZE; frame_size = (bpl == Y411_LINE_SZ) ? FRAME_SIZE_NTSC_Y411 : FRAME_SIZE_NTSC_Y422; } else { risc_program_size = PAL_VID_PROG_SIZE; frame_size = (bpl == Y411_LINE_SZ) ? FRAME_SIZE_PAL_Y411 : FRAME_SIZE_PAL_Y422; } /* Virtual address of Risc buffer program */ rp = dev->_dma_virt_addr; for (frame = 0; frame < NUM_FRAMES; frame++) { databuf_offset = frame_size * frame; if (UNSET != top_offset) { fifo_enable = (frame == 0) ? FIFO_ENABLE : FIFO_DISABLE; rp = cx25821_risc_field_upstream(dev, rp, dev->_data_buf_phys_addr + databuf_offset, top_offset, 0, bpl, odd_num_lines, fifo_enable, ODD_FIELD); } fifo_enable = FIFO_DISABLE; /* Even Field */ rp = cx25821_risc_field_upstream(dev, rp, dev->_data_buf_phys_addr + databuf_offset, bottom_offset, 0x200, bpl, singlefield_lines, fifo_enable, EVEN_FIELD); if (frame == 0) { risc_flag = RISC_CNT_RESET; risc_phys_jump_addr = dev->_dma_phys_start_addr + risc_program_size; } else { risc_phys_jump_addr = dev->_dma_phys_start_addr; risc_flag = RISC_CNT_INC; } /* Loop to 2ndFrameRISC or to Start of Risc * program & generate IRQ */ *(rp++) = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | risc_flag); *(rp++) = cpu_to_le32(risc_phys_jump_addr); *(rp++) = cpu_to_le32(0); } return 0; } void cx25821_stop_upstream_video_ch1(struct cx25821_dev *dev) { const struct sram_channel *sram_ch = dev->channels[VID_UPSTREAM_SRAM_CHANNEL_I].sram_channels; u32 tmp = 0; if (!dev->_is_running) { pr_info("No video file is currently running so return!\n"); return; } /* Disable RISC interrupts */ tmp = cx_read(sram_ch->int_msk); cx_write(sram_ch->int_msk, tmp & ~_intr_msk); /* Turn OFF risc and fifo enable */ tmp = cx_read(sram_ch->dma_ctl); cx_write(sram_ch->dma_ctl, tmp & ~(FLD_VID_FIFO_EN | FLD_VID_RISC_EN)); /* Clear data buffer memory */ if (dev->_data_buf_virt_addr) memset(dev->_data_buf_virt_addr, 0, dev->_data_buf_size); dev->_is_running = 0; dev->_is_first_frame = 0; dev->_frame_count = 0; dev->_file_status = END_OF_FILE; kfree(dev->_irq_queues); dev->_irq_queues = NULL; kfree(dev->_filename); tmp = cx_read(VID_CH_MODE_SEL); cx_write(VID_CH_MODE_SEL, tmp & 0xFFFFFE00); } void cx25821_free_mem_upstream_ch1(struct cx25821_dev *dev) { if (dev->_is_running) cx25821_stop_upstream_video_ch1(dev); if (dev->_dma_virt_addr) { pci_free_consistent(dev->pci, dev->_risc_size, dev->_dma_virt_addr, dev->_dma_phys_addr); dev->_dma_virt_addr = NULL; } if (dev->_data_buf_virt_addr) { pci_free_consistent(dev->pci, dev->_data_buf_size, dev->_data_buf_virt_addr, dev->_data_buf_phys_addr); dev->_data_buf_virt_addr = NULL; } } static int cx25821_get_frame(struct cx25821_dev *dev, const struct sram_channel *sram_ch) { struct file *myfile; int frame_index_temp = dev->_frame_index; int i = 0; int line_size = (dev->_pixel_format == PIXEL_FRMT_411) ? Y411_LINE_SZ : Y422_LINE_SZ; int frame_size = 0; int frame_offset = 0; ssize_t vfs_read_retval = 0; char mybuf[line_size]; loff_t file_offset; loff_t pos; mm_segment_t old_fs; if (dev->_file_status == END_OF_FILE) return 0; if (dev->_isNTSC) frame_size = (line_size == Y411_LINE_SZ) ? FRAME_SIZE_NTSC_Y411 : FRAME_SIZE_NTSC_Y422; else frame_size = (line_size == Y411_LINE_SZ) ? FRAME_SIZE_PAL_Y411 : FRAME_SIZE_PAL_Y422; frame_offset = (frame_index_temp > 0) ? frame_size : 0; file_offset = dev->_frame_count * frame_size; myfile = filp_open(dev->_filename, O_RDONLY | O_LARGEFILE, 0); if (IS_ERR(myfile)) { const int open_errno = -PTR_ERR(myfile); pr_err("%s(): ERROR opening file(%s) with errno = %d!\n", __func__, dev->_filename, open_errno); return PTR_ERR(myfile); } else { if (!(myfile->f_op)) { pr_err("%s(): File has no file operations registered!\n", __func__); filp_close(myfile, NULL); return -EIO; } if (!myfile->f_op->read) { pr_err("%s(): File has no READ operations registered!\n", __func__); filp_close(myfile, NULL); return -EIO; } pos = myfile->f_pos; old_fs = get_fs(); set_fs(KERNEL_DS); for (i = 0; i < dev->_lines_count; i++) { pos = file_offset; vfs_read_retval = vfs_read(myfile, mybuf, line_size, &pos); if (vfs_read_retval > 0 && vfs_read_retval == line_size && dev->_data_buf_virt_addr != NULL) { memcpy((void *)(dev->_data_buf_virt_addr + frame_offset / 4), mybuf, vfs_read_retval); } file_offset += vfs_read_retval; frame_offset += vfs_read_retval; if (vfs_read_retval < line_size) { pr_info("Done: exit %s() since no more bytes to read from Video file\n", __func__); break; } } if (i > 0) dev->_frame_count++; dev->_file_status = (vfs_read_retval == line_size) ? IN_PROGRESS : END_OF_FILE; set_fs(old_fs); filp_close(myfile, NULL); } return 0; } static void cx25821_vidups_handler(struct work_struct *work) { struct cx25821_dev *dev = container_of(work, struct cx25821_dev, _irq_work_entry); if (!dev) { pr_err("ERROR %s(): since container_of(work_struct) FAILED!\n", __func__); return; } cx25821_get_frame(dev, dev->channels[dev->_channel_upstream_select]. sram_channels); } static int cx25821_openfile(struct cx25821_dev *dev, const struct sram_channel *sram_ch) { struct file *myfile; int i = 0, j = 0; int line_size = (dev->_pixel_format == PIXEL_FRMT_411) ? Y411_LINE_SZ : Y422_LINE_SZ; ssize_t vfs_read_retval = 0; char mybuf[line_size]; loff_t pos; loff_t offset = (unsigned long)0; mm_segment_t old_fs; myfile = filp_open(dev->_filename, O_RDONLY | O_LARGEFILE, 0); if (IS_ERR(myfile)) { const int open_errno = -PTR_ERR(myfile); pr_err("%s(): ERROR opening file(%s) with errno = %d!\n", __func__, dev->_filename, open_errno); return PTR_ERR(myfile); } else { if (!(myfile->f_op)) { pr_err("%s(): File has no file operations registered!\n", __func__); filp_close(myfile, NULL); return -EIO; } if (!myfile->f_op->read) { pr_err("%s(): File has no READ operations registered! Returning\n", __func__); filp_close(myfile, NULL); return -EIO; } pos = myfile->f_pos; old_fs = get_fs(); set_fs(KERNEL_DS); for (j = 0; j < NUM_FRAMES; j++) { for (i = 0; i < dev->_lines_count; i++) { pos = offset; vfs_read_retval = vfs_read(myfile, mybuf, line_size, &pos); if (vfs_read_retval > 0 && vfs_read_retval == line_size && dev->_data_buf_virt_addr != NULL) { memcpy((void *)(dev-> _data_buf_virt_addr + offset / 4), mybuf, vfs_read_retval); } offset += vfs_read_retval; if (vfs_read_retval < line_size) { pr_info("Done: exit %s() since no more bytes to read from Video file\n", __func__); break; } } if (i > 0) dev->_frame_count++; if (vfs_read_retval < line_size) break; } dev->_file_status = (vfs_read_retval == line_size) ? IN_PROGRESS : END_OF_FILE; set_fs(old_fs); myfile->f_pos = 0; filp_close(myfile, NULL); } return 0; } static int cx25821_upstream_buffer_prepare(struct cx25821_dev *dev, const struct sram_channel *sram_ch, int bpl) { int ret = 0; dma_addr_t dma_addr; dma_addr_t data_dma_addr; if (dev->_dma_virt_addr != NULL) pci_free_consistent(dev->pci, dev->upstream_riscbuf_size, dev->_dma_virt_addr, dev->_dma_phys_addr); dev->_dma_virt_addr = pci_alloc_consistent(dev->pci, dev->upstream_riscbuf_size, &dma_addr); dev->_dma_virt_start_addr = dev->_dma_virt_addr; dev->_dma_phys_start_addr = dma_addr; dev->_dma_phys_addr = dma_addr; dev->_risc_size = dev->upstream_riscbuf_size; if (!dev->_dma_virt_addr) { pr_err("FAILED to allocate memory for Risc buffer! Returning\n"); return -ENOMEM; } /* Clear memory at address */ memset(dev->_dma_virt_addr, 0, dev->_risc_size); if (dev->_data_buf_virt_addr != NULL) pci_free_consistent(dev->pci, dev->upstream_databuf_size, dev->_data_buf_virt_addr, dev->_data_buf_phys_addr); /* For Video Data buffer allocation */ dev->_data_buf_virt_addr = pci_alloc_consistent(dev->pci, dev->upstream_databuf_size, &data_dma_addr); dev->_data_buf_phys_addr = data_dma_addr; dev->_data_buf_size = dev->upstream_databuf_size; if (!dev->_data_buf_virt_addr) { pr_err("FAILED to allocate memory for data buffer! Returning\n"); return -ENOMEM; } /* Clear memory at address */ memset(dev->_data_buf_virt_addr, 0, dev->_data_buf_size); ret = cx25821_openfile(dev, sram_ch); if (ret < 0) return ret; /* Create RISC programs */ ret = cx25821_risc_buffer_upstream(dev, dev->pci, 0, bpl, dev->_lines_count); if (ret < 0) { pr_info("Failed creating Video Upstream Risc programs!\n"); goto error; } return 0; error: return ret; } static int cx25821_video_upstream_irq(struct cx25821_dev *dev, int chan_num, u32 status) { u32 int_msk_tmp; const struct sram_channel *channel = dev->channels[chan_num].sram_channels; int singlefield_lines = NTSC_FIELD_HEIGHT; int line_size_in_bytes = Y422_LINE_SZ; int odd_risc_prog_size = 0; dma_addr_t risc_phys_jump_addr; __le32 *rp; if (status & FLD_VID_SRC_RISC1) { /* We should only process one program per call */ u32 prog_cnt = cx_read(channel->gpcnt); /* Since we've identified our IRQ, clear our bits from the * interrupt mask and interrupt status registers */ int_msk_tmp = cx_read(channel->int_msk); cx_write(channel->int_msk, int_msk_tmp & ~_intr_msk); cx_write(channel->int_stat, _intr_msk); spin_lock(&dev->slock); dev->_frame_index = prog_cnt; queue_work(dev->_irq_queues, &dev->_irq_work_entry); if (dev->_is_first_frame) { dev->_is_first_frame = 0; if (dev->_isNTSC) { singlefield_lines += 1; odd_risc_prog_size = ODD_FLD_NTSC_PROG_SIZE; } else { singlefield_lines = PAL_FIELD_HEIGHT; odd_risc_prog_size = ODD_FLD_PAL_PROG_SIZE; } if (dev->_dma_virt_start_addr != NULL) { line_size_in_bytes = (dev->_pixel_format == PIXEL_FRMT_411) ? Y411_LINE_SZ : Y422_LINE_SZ; risc_phys_jump_addr = dev->_dma_phys_start_addr + odd_risc_prog_size; rp = cx25821_update_riscprogram(dev, dev->_dma_virt_start_addr, TOP_OFFSET, line_size_in_bytes, 0x0, singlefield_lines, FIFO_DISABLE, ODD_FIELD); /* Jump to Even Risc program of 1st Frame */ *(rp++) = cpu_to_le32(RISC_JUMP); *(rp++) = cpu_to_le32(risc_phys_jump_addr); *(rp++) = cpu_to_le32(0); } } spin_unlock(&dev->slock); } else { if (status & FLD_VID_SRC_UF) pr_err("%s(): Video Received Underflow Error Interrupt!\n", __func__); if (status & FLD_VID_SRC_SYNC) pr_err("%s(): Video Received Sync Error Interrupt!\n", __func__); if (status & FLD_VID_SRC_OPC_ERR) pr_err("%s(): Video Received OpCode Error Interrupt!\n", __func__); } if (dev->_file_status == END_OF_FILE) { pr_err("EOF Channel 1 Framecount = %d\n", dev->_frame_count); return -1; } /* ElSE, set the interrupt mask register, re-enable irq. */ int_msk_tmp = cx_read(channel->int_msk); cx_write(channel->int_msk, int_msk_tmp |= _intr_msk); return 0; } static irqreturn_t cx25821_upstream_irq(int irq, void *dev_id) { struct cx25821_dev *dev = dev_id; u32 vid_status; int handled = 0; int channel_num = 0; const struct sram_channel *sram_ch; if (!dev) return -1; channel_num = VID_UPSTREAM_SRAM_CHANNEL_I; sram_ch = dev->channels[channel_num].sram_channels; vid_status = cx_read(sram_ch->int_stat); /* Only deal with our interrupt */ if (vid_status) handled = cx25821_video_upstream_irq(dev, channel_num, vid_status); if (handled < 0) cx25821_stop_upstream_video_ch1(dev); else handled += handled; return IRQ_RETVAL(handled); } static void cx25821_set_pixelengine(struct cx25821_dev *dev, const struct sram_channel *ch, int pix_format) { int width = WIDTH_D1; int height = dev->_lines_count; int num_lines, odd_num_lines; u32 value; int vip_mode = OUTPUT_FRMT_656; value = ((pix_format & 0x3) << 12) | (vip_mode & 0x7); value &= 0xFFFFFFEF; value |= dev->_isNTSC ? 0 : 0x10; cx_write(ch->vid_fmt_ctl, value); /* set number of active pixels in each line. * Default is 720 pixels in both NTSC and PAL format */ cx_write(ch->vid_active_ctl1, width); num_lines = (height / 2) & 0x3FF; odd_num_lines = num_lines; if (dev->_isNTSC) odd_num_lines += 1; value = (num_lines << 16) | odd_num_lines; /* set number of active lines in field 0 (top) and field 1 (bottom) */ cx_write(ch->vid_active_ctl2, value); cx_write(ch->vid_cdt_size, VID_CDT_SIZE >> 3); } static int cx25821_start_video_dma_upstream(struct cx25821_dev *dev, const struct sram_channel *sram_ch) { u32 tmp = 0; int err = 0; /* 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for * channel A-C */ tmp = cx_read(VID_CH_MODE_SEL); cx_write(VID_CH_MODE_SEL, tmp | 0x1B0001FF); /* Set the physical start address of the RISC program in the initial * program counter(IPC) member of the cmds. */ cx_write(sram_ch->cmds_start + 0, dev->_dma_phys_addr); /* Risc IPC High 64 bits 63-32 */ cx_write(sram_ch->cmds_start + 4, 0); /* reset counter */ cx_write(sram_ch->gpcnt_ctl, 3); /* Clear our bits from the interrupt status register. */ cx_write(sram_ch->int_stat, _intr_msk); /* Set the interrupt mask register, enable irq. */ cx_set(PCI_INT_MSK, cx_read(PCI_INT_MSK) | (1 << sram_ch->irq_bit)); tmp = cx_read(sram_ch->int_msk); cx_write(sram_ch->int_msk, tmp |= _intr_msk); err = request_irq(dev->pci->irq, cx25821_upstream_irq, IRQF_SHARED, dev->name, dev); if (err < 0) { pr_err("%s: can't get upstream IRQ %d\n", dev->name, dev->pci->irq); goto fail_irq; } /* Start the DMA engine */ tmp = cx_read(sram_ch->dma_ctl); cx_set(sram_ch->dma_ctl, tmp | FLD_VID_RISC_EN); dev->_is_running = 1; dev->_is_first_frame = 1; return 0; fail_irq: cx25821_dev_unregister(dev); return err; } int cx25821_vidupstream_init_ch1(struct cx25821_dev *dev, int channel_select, int pixel_format) { const struct sram_channel *sram_ch; u32 tmp; int err = 0; int data_frame_size = 0; int risc_buffer_size = 0; int str_length = 0; if (dev->_is_running) { pr_info("Video Channel is still running so return!\n"); return 0; } dev->_channel_upstream_select = channel_select; sram_ch = dev->channels[channel_select].sram_channels; INIT_WORK(&dev->_irq_work_entry, cx25821_vidups_handler); dev->_irq_queues = create_singlethread_workqueue("cx25821_workqueue"); if (!dev->_irq_queues) { pr_err("create_singlethread_workqueue() for Video FAILED!\n"); return -ENOMEM; } /* 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for * channel A-C */ tmp = cx_read(VID_CH_MODE_SEL); cx_write(VID_CH_MODE_SEL, tmp | 0x1B0001FF); dev->_is_running = 0; dev->_frame_count = 0; dev->_file_status = RESET_STATUS; dev->_lines_count = dev->_isNTSC ? 480 : 576; dev->_pixel_format = pixel_format; dev->_line_size = (dev->_pixel_format == PIXEL_FRMT_422) ? (WIDTH_D1 * 2) : (WIDTH_D1 * 3) / 2; data_frame_size = dev->_isNTSC ? NTSC_DATA_BUF_SZ : PAL_DATA_BUF_SZ; risc_buffer_size = dev->_isNTSC ? NTSC_RISC_BUF_SIZE : PAL_RISC_BUF_SIZE; if (dev->input_filename) { str_length = strlen(dev->input_filename); dev->_filename = kmemdup(dev->input_filename, str_length + 1, GFP_KERNEL); if (!dev->_filename) { err = -ENOENT; goto error; } } else { str_length = strlen(dev->_defaultname); dev->_filename = kmemdup(dev->_defaultname, str_length + 1, GFP_KERNEL); if (!dev->_filename) { err = -ENOENT; goto error; } } /* Default if filename is empty string */ if (strcmp(dev->_filename, "") == 0) { if (dev->_isNTSC) { dev->_filename = (dev->_pixel_format == PIXEL_FRMT_411) ? "/root/vid411.yuv" : "/root/vidtest.yuv"; } else { dev->_filename = (dev->_pixel_format == PIXEL_FRMT_411) ? "/root/pal411.yuv" : "/root/pal422.yuv"; } } dev->_is_running = 0; dev->_frame_count = 0; dev->_file_status = RESET_STATUS; dev->_lines_count = dev->_isNTSC ? 480 : 576; dev->_pixel_format = pixel_format; dev->_line_size = (dev->_pixel_format == PIXEL_FRMT_422) ? (WIDTH_D1 * 2) : (WIDTH_D1 * 3) / 2; err = cx25821_sram_channel_setup_upstream(dev, sram_ch, dev->_line_size, 0); /* setup fifo + format */ cx25821_set_pixelengine(dev, sram_ch, dev->_pixel_format); dev->upstream_riscbuf_size = risc_buffer_size * 2; dev->upstream_databuf_size = data_frame_size * 2; /* Allocating buffers and prepare RISC program */ err = cx25821_upstream_buffer_prepare(dev, sram_ch, dev->_line_size); if (err < 0) { pr_err("%s: Failed to set up Video upstream buffers!\n", dev->name); goto error; } cx25821_start_video_dma_upstream(dev, sram_ch); return 0; error: cx25821_dev_unregister(dev); return err; }