# # Light sensors # # When adding new entries keep the list in alphabetical order menu "Light sensors" config ACPI_ALS tristate "ACPI Ambient Light Sensor" depends on ACPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER select IIO_KFIFO_BUF help Say Y here if you want to build a driver for the ACPI0008 Ambient Light Sensor. To compile this driver as a module, choose M here: the module will be called acpi-als. config ADJD_S311 tristate "ADJD-S311-CR999 digital color sensor" select IIO_BUFFER select IIO_TRIGGERED_BUFFER depends on I2C help If you say yes here you get support for the Avago ADJD-S311-CR999 digital color light sensor. This driver can also be built as a module. If so, the module will be called adjd_s311. config AL3320A tristate "AL3320A ambient light sensor" depends on I2C help Say Y here if you want to build a driver for the Dyna Image AL3320A ambient light sensor. To compile this driver as a module, choose M here: the module will be called al3320a. config APDS9300 tristate "APDS9300 ambient light sensor" depends on I2C help Say Y here if you want to build a driver for the Avago APDS9300 ambient light sensor. To compile this driver as a module, choose M here: the module will be called apds9300. config APDS9960 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" select REGMAP_I2C select IIO_BUFFER select IIO_KFIFO_BUF depends on I2C help Say Y here to build I2C interface support for the Avago APDS9960 gesture/RGB/ALS/proximity sensor. To compile this driver as a module, choose M here: the module will be called apds9960 config BH1750 tristate "ROHM BH1750 ambient light sensor" depends on I2C help Say Y here to build support for the ROHM BH1710, BH1715, BH1721, BH1750, BH1751 ambient light sensors. To compile this driver as a module, choose M here: the module will be called bh1750. config BH1780 tristate "ROHM BH1780 ambient light sensor" depends on I2C help Say Y here to build support for the ROHM BH1780GLI ambient light sensor. To compile this driver as a module, choose M here: the module will be called bh1780. config CM32181 depends on I2C tristate "CM32181 driver" help Say Y here if you use cm32181. This option enables ambient light sensor using Capella cm32181 device driver. To compile this driver as a module, choose M here: the module will be called cm32181. config CM3232 depends on I2C tristate "CM3232 ambient light sensor" help Say Y here if you use cm3232. This option enables ambient light sensor using Capella Microsystems cm3232 device driver. To compile this driver as a module, choose M here: the module will be called cm3232. config CM3323 depends on I2C tristate "Capella CM3323 color light sensor" help Say Y here if you want to build a driver for Capella CM3323 color sensor. To compile this driver as a module, choose M here: the module will be called cm3323. config CM36651 depends on I2C tristate "CM36651 driver" help Say Y here if you use cm36651. This option enables proximity & RGB sensor using Capella cm36651 device driver. To compile this driver as a module, choose M here: the module will be called cm36651. config GP2AP020A00F tristate "Sharp GP2AP020A00F Proximity/ALS sensor" depends on I2C select REGMAP_I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER select IRQ_WORK help Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip hooked to an I2C bus. To compile this driver as a module, choose M here: the module will be called gp2ap020a00f. config SENSORS_ISL29018 tristate "Intersil 29018 light and proximity sensor" depends on I2C select REGMAP_I2C default n help If you say yes here you get support for ambient light sensing and proximity infrared sensing from Intersil ISL29018. This driver will provide the measurements of ambient light intensity in lux, proximity infrared sensing and normal infrared sensing. Data from sensor is accessible via sysfs. config ISL29125 tristate "Intersil ISL29125 digital color light sensor" depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say Y here if you want to build a driver for the Intersil ISL29125 RGB light sensor for I2C. To compile this driver as a module, choose M here: the module will be called isl29125. config HID_SENSOR_ALS depends on HID_SENSOR_HUB select IIO_BUFFER select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON select HID_SENSOR_IIO_TRIGGER tristate "HID ALS" help Say yes here to build support for the HID SENSOR Ambient light sensor. To compile this driver as a module, choose M here: the module will be called hid-sensor-als. config HID_SENSOR_PROX depends on HID_SENSOR_HUB select IIO_BUFFER select IIO_TRIGGERED_BUFFER select HID_SENSOR_IIO_COMMON select HID_SENSOR_IIO_TRIGGER tristate "HID PROX" help Say yes here to build support for the HID SENSOR Proximity sensor. To compile this driver as a module, choose M here: the module will be called hid-sensor-prox. config JSA1212 tristate "JSA1212 ALS and proximity sensor driver" depends on I2C select REGMAP_I2C help Say Y here if you want to build a IIO driver for JSA1212 proximity & ALS sensor device. To compile this driver as a module, choose M here: the module will be called jsa1212. config RPR0521 tristate "ROHM RPR0521 ALS and proximity sensor driver" depends on I2C select REGMAP_I2C help Say Y here if you want to build support for ROHM's RPR0521 ambient light and proximity sensor device. To compile this driver as a module, choose M here: the module will be called rpr0521. config SENSORS_LM3533 tristate "LM3533 ambient light sensor" depends on MFD_LM3533 help If you say yes here you get support for the ambient light sensor interface on National Semiconductor / TI LM3533 Lighting Power chips. The sensor interface can be used to control the LEDs and backlights of the chip through defining five light zones and three sets of corresponding output-current values. The driver provides raw and mean adc readings along with the current light zone through sysfs. A threshold event can be generated on zone changes. The ALS-control output values can be set per zone for the three current output channels. config LTR501 tristate "LTR-501ALS-01 light sensor" depends on I2C select REGMAP_I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for the Lite-On LTR-501ALS-01 ambient light and proximity sensor. This driver also supports LTR-559 ALS/PS or LTR-301 ALS sensors. This driver can also be built as a module. If so, the module will be called ltr501. config MAX44000 tristate "MAX44000 Ambient and Infrared Proximity Sensor" depends on I2C select REGMAP_I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say Y here if you want to build support for Maxim Integrated's MAX44000 ambient and infrared proximity sensor device. To compile this driver as a module, choose M here: the module will be called max44000. config OPT3001 tristate "Texas Instruments OPT3001 Light Sensor" depends on I2C help If you say Y or M here, you get support for Texas Instruments OPT3001 Ambient Light Sensor. If built as a dynamically linked module, it will be called opt3001. config PA12203001 tristate "TXC PA12203001 light and proximity sensor" depends on I2C select REGMAP_I2C help If you say yes here you get support for the TXC PA12203001 ambient light and proximity sensor. This driver can also be built as a module. If so, the module will be called pa12203001. config SI1145 tristate "SI1132 and SI1141/2/3/5/6/7 combined ALS, UV index and proximity sensor" depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say Y here if you want to build a driver for the Silicon Labs SI1132 or SI1141/2/3/5/6/7 combined ambient light, UV index and proximity sensor chips. To compile this driver as a module, choose M here: the module will be called si1145. config STK3310 tristate "STK3310 ALS and proximity sensor" depends on I2C select REGMAP_I2C help Say yes here to get support for the Sensortek STK3310 ambient light and proximity sensor. The STK3311 model is also supported by this driver. Choosing M will build the driver as a module. If so, the module will be called stk3310. config TCS3414 tristate "TAOS TCS3414 digital color sensor" depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for the TAOS TCS3414 family of digital color sensors. This driver can also be built as a module. If so, the module will be called tcs3414. config TCS3472 tristate "TAOS TCS3472 color light-to-digital converter" depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for the TAOS TCS3472 family of color light-to-digital converters with IR filter. This driver can also be built as a module. If so, the module will be called tcs3472. config SENSORS_TSL2563 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" depends on I2C help If you say yes here you get support for the Taos TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors. This driver can also be built as a module. If so, the module will be called tsl2563. config TSL4531 tristate "TAOS TSL4531 ambient light sensors" depends on I2C help Say Y here if you want to build a driver for the TAOS TSL4531 family of ambient light sensors with direct lux output. To compile this driver as a module, choose M here: the module will be called tsl4531. config US5182D tristate "UPISEMI light and proximity sensor" depends on I2C help If you say yes here you get support for the UPISEMI US5182D ambient light and proximity sensor. This driver can also be built as a module. If so, the module will be called us5182d. config VCNL4000 tristate "VCNL4000/4010/4020 combined ALS and proximity sensor" depends on I2C help Say Y here if you want to build a driver for the Vishay VCNL4000, VCNL4010, VCNL4020 combined ambient light and proximity sensor. To compile this driver as a module, choose M here: the module will be called vcnl4000. config VEML6070 tristate "VEML6070 UV A light sensor" depends on I2C help Say Y here if you want to build a driver for the Vishay VEML6070 UV A light sensor. To compile this driver as a module, choose M here: the module will be called veml6070. endmenu