// SPDX-License-Identifier: GPL-2.0-or-later /* * dell-smm-hwmon.c -- Linux driver for accessing the SMM BIOS on Dell laptops. * * Copyright (C) 2001 Massimo Dal Zotto * * Hwmon integration: * Copyright (C) 2011 Jean Delvare * Copyright (C) 2013, 2014 Guenter Roeck * Copyright (C) 2014, 2015 Pali Rohár */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define I8K_SMM_FN_STATUS 0x0025 #define I8K_SMM_POWER_STATUS 0x0069 #define I8K_SMM_SET_FAN 0x01a3 #define I8K_SMM_GET_FAN 0x00a3 #define I8K_SMM_GET_SPEED 0x02a3 #define I8K_SMM_GET_FAN_TYPE 0x03a3 #define I8K_SMM_GET_NOM_SPEED 0x04a3 #define I8K_SMM_GET_TEMP 0x10a3 #define I8K_SMM_GET_TEMP_TYPE 0x11a3 #define I8K_SMM_GET_DELL_SIG1 0xfea3 #define I8K_SMM_GET_DELL_SIG2 0xffa3 #define I8K_FAN_MULT 30 #define I8K_FAN_MAX_RPM 30000 #define I8K_MAX_TEMP 127 #define I8K_FN_NONE 0x00 #define I8K_FN_UP 0x01 #define I8K_FN_DOWN 0x02 #define I8K_FN_MUTE 0x04 #define I8K_FN_MASK 0x07 #define I8K_FN_SHIFT 8 #define I8K_POWER_AC 0x05 #define I8K_POWER_BATTERY 0x01 #define DELL_SMM_NO_TEMP 10 #define DELL_SMM_NO_FANS 3 struct dell_smm_data { struct mutex i8k_mutex; /* lock for sensors writes */ char bios_version[4]; char bios_machineid[16]; uint i8k_fan_mult; uint i8k_pwm_mult; uint i8k_fan_max; bool disallow_fan_type_call; bool disallow_fan_support; unsigned int manual_fan; unsigned int auto_fan; int temp_type[DELL_SMM_NO_TEMP]; bool fan[DELL_SMM_NO_FANS]; int fan_type[DELL_SMM_NO_FANS]; }; MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)"); MODULE_AUTHOR("Pali Rohár "); MODULE_DESCRIPTION("Dell laptop SMM BIOS hwmon driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("i8k"); static bool force; module_param(force, bool, 0); MODULE_PARM_DESC(force, "Force loading without checking for supported models"); static bool ignore_dmi; module_param(ignore_dmi, bool, 0); MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match"); #if IS_ENABLED(CONFIG_I8K) static bool restricted = true; module_param(restricted, bool, 0); MODULE_PARM_DESC(restricted, "Restrict fan control and serial number to CAP_SYS_ADMIN (default: 1)"); static bool power_status; module_param(power_status, bool, 0600); MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k (default: 0)"); #endif static uint fan_mult; module_param(fan_mult, uint, 0); MODULE_PARM_DESC(fan_mult, "Factor to multiply fan speed with (default: autodetect)"); static uint fan_max; module_param(fan_max, uint, 0); MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed (default: autodetect)"); struct smm_regs { unsigned int eax; unsigned int ebx __packed; unsigned int ecx __packed; unsigned int edx __packed; unsigned int esi __packed; unsigned int edi __packed; }; static const char * const temp_labels[] = { "CPU", "GPU", "SODIMM", "Other", "Ambient", "Other", }; static const char * const fan_labels[] = { "Processor Fan", "Motherboard Fan", "Video Fan", "Power Supply Fan", "Chipset Fan", "Other Fan", }; static const char * const docking_labels[] = { "Docking Processor Fan", "Docking Motherboard Fan", "Docking Video Fan", "Docking Power Supply Fan", "Docking Chipset Fan", "Docking Other Fan", }; static inline const char __init *i8k_get_dmi_data(int field) { const char *dmi_data = dmi_get_system_info(field); return dmi_data && *dmi_data ? dmi_data : "?"; } /* * Call the System Management Mode BIOS. Code provided by Jonathan Buzzard. */ static int i8k_smm_func(void *par) { ktime_t calltime = ktime_get(); struct smm_regs *regs = par; int eax = regs->eax; int ebx = regs->ebx; long long duration; int rc; /* SMM requires CPU 0 */ if (smp_processor_id() != 0) return -EBUSY; #if defined(CONFIG_X86_64) asm volatile("pushq %%rax\n\t" "movl 0(%%rax),%%edx\n\t" "pushq %%rdx\n\t" "movl 4(%%rax),%%ebx\n\t" "movl 8(%%rax),%%ecx\n\t" "movl 12(%%rax),%%edx\n\t" "movl 16(%%rax),%%esi\n\t" "movl 20(%%rax),%%edi\n\t" "popq %%rax\n\t" "out %%al,$0xb2\n\t" "out %%al,$0x84\n\t" "xchgq %%rax,(%%rsp)\n\t" "movl %%ebx,4(%%rax)\n\t" "movl %%ecx,8(%%rax)\n\t" "movl %%edx,12(%%rax)\n\t" "movl %%esi,16(%%rax)\n\t" "movl %%edi,20(%%rax)\n\t" "popq %%rdx\n\t" "movl %%edx,0(%%rax)\n\t" "pushfq\n\t" "popq %%rax\n\t" "andl $1,%%eax\n" : "=a"(rc) : "a"(regs) : "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory"); #else asm volatile("pushl %%eax\n\t" "movl 0(%%eax),%%edx\n\t" "push %%edx\n\t" "movl 4(%%eax),%%ebx\n\t" "movl 8(%%eax),%%ecx\n\t" "movl 12(%%eax),%%edx\n\t" "movl 16(%%eax),%%esi\n\t" "movl 20(%%eax),%%edi\n\t" "popl %%eax\n\t" "out %%al,$0xb2\n\t" "out %%al,$0x84\n\t" "xchgl %%eax,(%%esp)\n\t" "movl %%ebx,4(%%eax)\n\t" "movl %%ecx,8(%%eax)\n\t" "movl %%edx,12(%%eax)\n\t" "movl %%esi,16(%%eax)\n\t" "movl %%edi,20(%%eax)\n\t" "popl %%edx\n\t" "movl %%edx,0(%%eax)\n\t" "lahf\n\t" "shrl $8,%%eax\n\t" "andl $1,%%eax\n" : "=a"(rc) : "a"(regs) : "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory"); #endif if (rc != 0 || (regs->eax & 0xffff) == 0xffff || regs->eax == eax) rc = -EINVAL; duration = ktime_us_delta(ktime_get(), calltime); pr_debug("smm(0x%.4x 0x%.4x) = 0x%.4x (took %7lld usecs)\n", eax, ebx, (rc ? 0xffff : regs->eax & 0xffff), duration); return rc; } /* * Call the System Management Mode BIOS. */ static int i8k_smm(struct smm_regs *regs) { int ret; cpus_read_lock(); ret = smp_call_on_cpu(0, i8k_smm_func, regs, true); cpus_read_unlock(); return ret; } /* * Read the fan status. */ static int i8k_get_fan_status(const struct dell_smm_data *data, int fan) { struct smm_regs regs = { .eax = I8K_SMM_GET_FAN, }; if (data->disallow_fan_support) return -EINVAL; regs.ebx = fan & 0xff; return i8k_smm(®s) ? : regs.eax & 0xff; } /* * Read the fan speed in RPM. */ static int i8k_get_fan_speed(const struct dell_smm_data *data, int fan) { struct smm_regs regs = { .eax = I8K_SMM_GET_SPEED, }; if (data->disallow_fan_support) return -EINVAL; regs.ebx = fan & 0xff; return i8k_smm(®s) ? : (regs.eax & 0xffff) * data->i8k_fan_mult; } /* * Read the fan type. */ static int _i8k_get_fan_type(const struct dell_smm_data *data, int fan) { struct smm_regs regs = { .eax = I8K_SMM_GET_FAN_TYPE, }; if (data->disallow_fan_support || data->disallow_fan_type_call) return -EINVAL; regs.ebx = fan & 0xff; return i8k_smm(®s) ? : regs.eax & 0xff; } static int i8k_get_fan_type(struct dell_smm_data *data, int fan) { /* I8K_SMM_GET_FAN_TYPE SMM call is expensive, so cache values */ if (data->fan_type[fan] == INT_MIN) data->fan_type[fan] = _i8k_get_fan_type(data, fan); return data->fan_type[fan]; } /* * Read the fan nominal rpm for specific fan speed. */ static int __init i8k_get_fan_nominal_speed(const struct dell_smm_data *data, int fan, int speed) { struct smm_regs regs = { .eax = I8K_SMM_GET_NOM_SPEED, }; if (data->disallow_fan_support) return -EINVAL; regs.ebx = (fan & 0xff) | (speed << 8); return i8k_smm(®s) ? : (regs.eax & 0xffff) * data->i8k_fan_mult; } /* * Enable or disable automatic BIOS fan control support */ static int i8k_enable_fan_auto_mode(const struct dell_smm_data *data, bool enable) { struct smm_regs regs = { }; if (data->disallow_fan_support) return -EINVAL; regs.eax = enable ? data->auto_fan : data->manual_fan; return i8k_smm(®s); } /* * Set the fan speed (off, low, high). Returns the new fan status. */ static int i8k_set_fan(const struct dell_smm_data *data, int fan, int speed) { struct smm_regs regs = { .eax = I8K_SMM_SET_FAN, }; if (data->disallow_fan_support) return -EINVAL; speed = (speed < 0) ? 0 : ((speed > data->i8k_fan_max) ? data->i8k_fan_max : speed); regs.ebx = (fan & 0xff) | (speed << 8); return i8k_smm(®s) ? : i8k_get_fan_status(data, fan); } static int __init i8k_get_temp_type(int sensor) { struct smm_regs regs = { .eax = I8K_SMM_GET_TEMP_TYPE, }; regs.ebx = sensor & 0xff; return i8k_smm(®s) ? : regs.eax & 0xff; } /* * Read the cpu temperature. */ static int _i8k_get_temp(int sensor) { struct smm_regs regs = { .eax = I8K_SMM_GET_TEMP, .ebx = sensor & 0xff, }; return i8k_smm(®s) ? : regs.eax & 0xff; } static int i8k_get_temp(int sensor) { int temp = _i8k_get_temp(sensor); /* * Sometimes the temperature sensor returns 0x99, which is out of range. * In this case we retry (once) before returning an error. # 1003655137 00000058 00005a4b # 1003655138 00000099 00003a80 <--- 0x99 = 153 degrees # 1003655139 00000054 00005c52 */ if (temp == 0x99) { msleep(100); temp = _i8k_get_temp(sensor); } /* * Return -ENODATA for all invalid temperatures. * * Known instances are the 0x99 value as seen above as well as * 0xc1 (193), which may be returned when trying to read the GPU * temperature if the system supports a GPU and it is currently * turned off. */ if (temp > I8K_MAX_TEMP) return -ENODATA; return temp; } static int __init i8k_get_dell_signature(int req_fn) { struct smm_regs regs = { .eax = req_fn, }; int rc; rc = i8k_smm(®s); if (rc < 0) return rc; return regs.eax == 1145651527 && regs.edx == 1145392204 ? 0 : -1; } #if IS_ENABLED(CONFIG_I8K) /* * Read the Fn key status. */ static int i8k_get_fn_status(void) { struct smm_regs regs = { .eax = I8K_SMM_FN_STATUS, }; int rc; rc = i8k_smm(®s); if (rc < 0) return rc; switch ((regs.eax >> I8K_FN_SHIFT) & I8K_FN_MASK) { case I8K_FN_UP: return I8K_VOL_UP; case I8K_FN_DOWN: return I8K_VOL_DOWN; case I8K_FN_MUTE: return I8K_VOL_MUTE; default: return 0; } } /* * Read the power status. */ static int i8k_get_power_status(void) { struct smm_regs regs = { .eax = I8K_SMM_POWER_STATUS, }; int rc; rc = i8k_smm(®s); if (rc < 0) return rc; return (regs.eax & 0xff) == I8K_POWER_AC ? I8K_AC : I8K_BATTERY; } /* * Procfs interface */ static int i8k_ioctl_unlocked(struct file *fp, struct dell_smm_data *data, unsigned int cmd, unsigned long arg) { int val = 0; int speed; unsigned char buff[16]; int __user *argp = (int __user *)arg; if (!argp) return -EINVAL; switch (cmd) { case I8K_BIOS_VERSION: if (!isdigit(data->bios_version[0]) || !isdigit(data->bios_version[1]) || !isdigit(data->bios_version[2])) return -EINVAL; val = (data->bios_version[0] << 16) | (data->bios_version[1] << 8) | data->bios_version[2]; break; case I8K_MACHINE_ID: if (restricted && !capable(CAP_SYS_ADMIN)) return -EPERM; memset(buff, 0, sizeof(buff)); strscpy(buff, data->bios_machineid, sizeof(buff)); break; case I8K_FN_STATUS: val = i8k_get_fn_status(); break; case I8K_POWER_STATUS: val = i8k_get_power_status(); break; case I8K_GET_TEMP: val = i8k_get_temp(0); break; case I8K_GET_SPEED: if (copy_from_user(&val, argp, sizeof(int))) return -EFAULT; val = i8k_get_fan_speed(data, val); break; case I8K_GET_FAN: if (copy_from_user(&val, argp, sizeof(int))) return -EFAULT; val = i8k_get_fan_status(data, val); break; case I8K_SET_FAN: if (restricted && !capable(CAP_SYS_ADMIN)) return -EPERM; if (copy_from_user(&val, argp, sizeof(int))) return -EFAULT; if (copy_from_user(&speed, argp + 1, sizeof(int))) return -EFAULT; val = i8k_set_fan(data, val, speed); break; default: return -EINVAL; } if (val < 0) return val; switch (cmd) { case I8K_BIOS_VERSION: if (copy_to_user(argp, &val, 4)) return -EFAULT; break; case I8K_MACHINE_ID: if (copy_to_user(argp, buff, 16)) return -EFAULT; break; default: if (copy_to_user(argp, &val, sizeof(int))) return -EFAULT; break; } return 0; } static long i8k_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) { struct dell_smm_data *data = PDE_DATA(file_inode(fp)); long ret; mutex_lock(&data->i8k_mutex); ret = i8k_ioctl_unlocked(fp, data, cmd, arg); mutex_unlock(&data->i8k_mutex); return ret; } /* * Print the information for /proc/i8k. */ static int i8k_proc_show(struct seq_file *seq, void *offset) { struct dell_smm_data *data = seq->private; int fn_key, cpu_temp, ac_power; int left_fan, right_fan, left_speed, right_speed; cpu_temp = i8k_get_temp(0); /* 11100 µs */ left_fan = i8k_get_fan_status(data, I8K_FAN_LEFT); /* 580 µs */ right_fan = i8k_get_fan_status(data, I8K_FAN_RIGHT); /* 580 µs */ left_speed = i8k_get_fan_speed(data, I8K_FAN_LEFT); /* 580 µs */ right_speed = i8k_get_fan_speed(data, I8K_FAN_RIGHT); /* 580 µs */ fn_key = i8k_get_fn_status(); /* 750 µs */ if (power_status) ac_power = i8k_get_power_status(); /* 14700 µs */ else ac_power = -1; /* * Info: * * 1) Format version (this will change if format changes) * 2) BIOS version * 3) BIOS machine ID * 4) Cpu temperature * 5) Left fan status * 6) Right fan status * 7) Left fan speed * 8) Right fan speed * 9) AC power * 10) Fn Key status */ seq_printf(seq, "%s %s %s %d %d %d %d %d %d %d\n", I8K_PROC_FMT, data->bios_version, (restricted && !capable(CAP_SYS_ADMIN)) ? "-1" : data->bios_machineid, cpu_temp, left_fan, right_fan, left_speed, right_speed, ac_power, fn_key); return 0; } static int i8k_open_fs(struct inode *inode, struct file *file) { return single_open(file, i8k_proc_show, PDE_DATA(inode)); } static const struct proc_ops i8k_proc_ops = { .proc_open = i8k_open_fs, .proc_read = seq_read, .proc_lseek = seq_lseek, .proc_release = single_release, .proc_ioctl = i8k_ioctl, }; static void i8k_exit_procfs(void *param) { remove_proc_entry("i8k", NULL); } static void __init i8k_init_procfs(struct device *dev) { struct dell_smm_data *data = dev_get_drvdata(dev); /* Register the proc entry */ proc_create_data("i8k", 0, NULL, &i8k_proc_ops, data); devm_add_action_or_reset(dev, i8k_exit_procfs, NULL); } #else static void __init i8k_init_procfs(struct device *dev) { } #endif /* * Hwmon interface */ static umode_t dell_smm_is_visible(const void *drvdata, enum hwmon_sensor_types type, u32 attr, int channel) { const struct dell_smm_data *data = drvdata; switch (type) { case hwmon_temp: switch (attr) { case hwmon_temp_input: case hwmon_temp_label: if (data->temp_type[channel] >= 0) return 0444; break; default: break; } break; case hwmon_fan: if (data->disallow_fan_support) break; switch (attr) { case hwmon_fan_input: if (data->fan[channel]) return 0444; break; case hwmon_fan_label: if (data->fan[channel] && !data->disallow_fan_type_call) return 0444; break; default: break; } break; case hwmon_pwm: if (data->disallow_fan_support) break; switch (attr) { case hwmon_pwm_input: if (data->fan[channel]) return 0644; break; case hwmon_pwm_enable: if (data->auto_fan) /* * There is no command for retrieve the current status * from BIOS, and userspace/firmware itself can change * it. * Thus we can only provide write-only access for now. */ return 0200; break; default: break; } break; default: break; } return 0; } static int dell_smm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long *val) { struct dell_smm_data *data = dev_get_drvdata(dev); int ret; switch (type) { case hwmon_temp: switch (attr) { case hwmon_temp_input: ret = i8k_get_temp(channel); if (ret < 0) return ret; *val = ret * 1000; return 0; default: break; } break; case hwmon_fan: switch (attr) { case hwmon_fan_input: ret = i8k_get_fan_speed(data, channel); if (ret < 0) return ret; *val = ret; return 0; default: break; } break; case hwmon_pwm: switch (attr) { case hwmon_pwm_input: ret = i8k_get_fan_status(data, channel); if (ret < 0) return ret; *val = clamp_val(ret * data->i8k_pwm_mult, 0, 255); return 0; default: break; } break; default: break; } return -EOPNOTSUPP; } static const char *dell_smm_fan_label(struct dell_smm_data *data, int channel) { bool dock = false; int type = i8k_get_fan_type(data, channel); if (type < 0) return ERR_PTR(type); if (type & 0x10) { dock = true; type &= 0x0F; } if (type >= ARRAY_SIZE(fan_labels)) type = ARRAY_SIZE(fan_labels) - 1; return dock ? docking_labels[type] : fan_labels[type]; } static int dell_smm_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, const char **str) { struct dell_smm_data *data = dev_get_drvdata(dev); switch (type) { case hwmon_temp: switch (attr) { case hwmon_temp_label: *str = temp_labels[data->temp_type[channel]]; return 0; default: break; } break; case hwmon_fan: switch (attr) { case hwmon_fan_label: *str = dell_smm_fan_label(data, channel); return PTR_ERR_OR_ZERO(*str); default: break; } break; default: break; } return -EOPNOTSUPP; } static int dell_smm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long val) { struct dell_smm_data *data = dev_get_drvdata(dev); unsigned long pwm; bool enable; int err; switch (type) { case hwmon_pwm: switch (attr) { case hwmon_pwm_input: pwm = clamp_val(DIV_ROUND_CLOSEST(val, data->i8k_pwm_mult), 0, data->i8k_fan_max); mutex_lock(&data->i8k_mutex); err = i8k_set_fan(data, channel, pwm); mutex_unlock(&data->i8k_mutex); if (err < 0) return err; return 0; case hwmon_pwm_enable: if (!val) return -EINVAL; if (val == 1) enable = false; else enable = true; mutex_lock(&data->i8k_mutex); err = i8k_enable_fan_auto_mode(data, enable); mutex_unlock(&data->i8k_mutex); if (err < 0) return err; return 0; default: break; } break; default: break; } return -EOPNOTSUPP; } static const struct hwmon_ops dell_smm_ops = { .is_visible = dell_smm_is_visible, .read = dell_smm_read, .read_string = dell_smm_read_string, .write = dell_smm_write, }; static const struct hwmon_channel_info *dell_smm_info[] = { HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL ), HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_LABEL, HWMON_F_INPUT | HWMON_F_LABEL, HWMON_F_INPUT | HWMON_F_LABEL ), HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT | HWMON_PWM_ENABLE, HWMON_PWM_INPUT, HWMON_PWM_INPUT ), NULL }; static const struct hwmon_chip_info dell_smm_chip_info = { .ops = &dell_smm_ops, .info = dell_smm_info, }; static int __init dell_smm_init_hwmon(struct device *dev) { struct dell_smm_data *data = dev_get_drvdata(dev); struct device *dell_smm_hwmon_dev; int i, err; for (i = 0; i < DELL_SMM_NO_TEMP; i++) { data->temp_type[i] = i8k_get_temp_type(i); if (data->temp_type[i] < 0) continue; if (data->temp_type[i] >= ARRAY_SIZE(temp_labels)) data->temp_type[i] = ARRAY_SIZE(temp_labels) - 1; } for (i = 0; i < DELL_SMM_NO_FANS; i++) { data->fan_type[i] = INT_MIN; err = i8k_get_fan_status(data, i); if (err < 0) err = i8k_get_fan_type(data, i); if (err >= 0) data->fan[i] = true; } dell_smm_hwmon_dev = devm_hwmon_device_register_with_info(dev, "dell_smm", data, &dell_smm_chip_info, NULL); return PTR_ERR_OR_ZERO(dell_smm_hwmon_dev); } struct i8k_config_data { uint fan_mult; uint fan_max; }; enum i8k_configs { DELL_LATITUDE_D520, DELL_PRECISION_490, DELL_STUDIO, DELL_XPS, }; static const struct i8k_config_data i8k_config_data[] __initconst = { [DELL_LATITUDE_D520] = { .fan_mult = 1, .fan_max = I8K_FAN_TURBO, }, [DELL_PRECISION_490] = { .fan_mult = 1, .fan_max = I8K_FAN_TURBO, }, [DELL_STUDIO] = { .fan_mult = 1, .fan_max = I8K_FAN_HIGH, }, [DELL_XPS] = { .fan_mult = 1, .fan_max = I8K_FAN_HIGH, }, }; static const struct dmi_system_id i8k_dmi_table[] __initconst = { { .ident = "Dell Inspiron", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer"), DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron"), }, }, { .ident = "Dell Latitude", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer"), DMI_MATCH(DMI_PRODUCT_NAME, "Latitude"), }, }, { .ident = "Dell Inspiron 2", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron"), }, }, { .ident = "Dell Latitude D520", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Latitude D520"), }, .driver_data = (void *)&i8k_config_data[DELL_LATITUDE_D520], }, { .ident = "Dell Latitude 2", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Latitude"), }, }, { /* UK Inspiron 6400 */ .ident = "Dell Inspiron 3", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "MM061"), }, }, { .ident = "Dell Inspiron 3", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "MP061"), }, }, { .ident = "Dell Precision 490", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation 490"), }, .driver_data = (void *)&i8k_config_data[DELL_PRECISION_490], }, { .ident = "Dell Precision", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Precision"), }, }, { .ident = "Dell Vostro", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Vostro"), }, }, { .ident = "Dell Studio", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "Studio"), }, .driver_data = (void *)&i8k_config_data[DELL_STUDIO], }, { .ident = "Dell XPS M140", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "MXC051"), }, .driver_data = (void *)&i8k_config_data[DELL_XPS], }, { .ident = "Dell XPS", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_PRODUCT_NAME, "XPS"), }, }, { } }; MODULE_DEVICE_TABLE(dmi, i8k_dmi_table); /* * On some machines once I8K_SMM_GET_FAN_TYPE is issued then CPU fan speed * randomly going up and down due to bug in Dell SMM or BIOS. Here is blacklist * of affected Dell machines for which we disallow I8K_SMM_GET_FAN_TYPE call. * See bug: https://bugzilla.kernel.org/show_bug.cgi?id=100121 */ static const struct dmi_system_id i8k_blacklist_fan_type_dmi_table[] __initconst = { { .ident = "Dell Studio XPS 8000", .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Studio XPS 8000"), }, }, { .ident = "Dell Studio XPS 8100", .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Studio XPS 8100"), }, }, { .ident = "Dell Inspiron 580", .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Inspiron 580 "), }, }, { } }; /* * On some machines all fan related SMM functions implemented by Dell BIOS * firmware freeze kernel for about 500ms. Until Dell fixes these problems fan * support for affected blacklisted Dell machines stay disabled. * See bug: https://bugzilla.kernel.org/show_bug.cgi?id=195751 */ static const struct dmi_system_id i8k_blacklist_fan_support_dmi_table[] __initconst = { { .ident = "Dell Inspiron 7720", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Inspiron 7720"), }, }, { .ident = "Dell Vostro 3360", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Vostro 3360"), }, }, { .ident = "Dell XPS13 9333", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "XPS13 9333"), }, }, { .ident = "Dell XPS 15 L502X", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Dell System XPS L502X"), }, }, { } }; struct i8k_fan_control_data { unsigned int manual_fan; unsigned int auto_fan; }; enum i8k_fan_controls { I8K_FAN_34A3_35A3, }; static const struct i8k_fan_control_data i8k_fan_control_data[] __initconst = { [I8K_FAN_34A3_35A3] = { .manual_fan = 0x34a3, .auto_fan = 0x35a3, }, }; static const struct dmi_system_id i8k_whitelist_fan_control[] __initconst = { { .ident = "Dell Latitude 5480", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude 5480"), }, .driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], }, { .ident = "Dell Latitude E6440", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude E6440"), }, .driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], }, { .ident = "Dell Latitude E7440", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude E7440"), }, .driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], }, { .ident = "Dell Precision 5530", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Precision 5530"), }, .driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], }, { .ident = "Dell Precision 7510", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Precision 7510"), }, .driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3], }, { } }; static int __init dell_smm_probe(struct platform_device *pdev) { struct dell_smm_data *data; const struct dmi_system_id *id, *fan_control; int fan, ret; data = devm_kzalloc(&pdev->dev, sizeof(struct dell_smm_data), GFP_KERNEL); if (!data) return -ENOMEM; mutex_init(&data->i8k_mutex); data->i8k_fan_mult = I8K_FAN_MULT; data->i8k_fan_max = I8K_FAN_HIGH; platform_set_drvdata(pdev, data); if (dmi_check_system(i8k_blacklist_fan_support_dmi_table)) { dev_warn(&pdev->dev, "broken Dell BIOS detected, disallow fan support\n"); if (!force) data->disallow_fan_support = true; } if (dmi_check_system(i8k_blacklist_fan_type_dmi_table)) { dev_warn(&pdev->dev, "broken Dell BIOS detected, disallow fan type call\n"); if (!force) data->disallow_fan_type_call = true; } strscpy(data->bios_version, i8k_get_dmi_data(DMI_BIOS_VERSION), sizeof(data->bios_version)); strscpy(data->bios_machineid, i8k_get_dmi_data(DMI_PRODUCT_SERIAL), sizeof(data->bios_machineid)); /* * Set fan multiplier and maximal fan speed from dmi config * Values specified in module parameters override values from dmi */ id = dmi_first_match(i8k_dmi_table); if (id && id->driver_data) { const struct i8k_config_data *conf = id->driver_data; if (!fan_mult && conf->fan_mult) fan_mult = conf->fan_mult; if (!fan_max && conf->fan_max) fan_max = conf->fan_max; } data->i8k_fan_max = fan_max ? : I8K_FAN_HIGH; /* Must not be 0 */ data->i8k_pwm_mult = DIV_ROUND_UP(255, data->i8k_fan_max); fan_control = dmi_first_match(i8k_whitelist_fan_control); if (fan_control && fan_control->driver_data) { const struct i8k_fan_control_data *control = fan_control->driver_data; data->manual_fan = control->manual_fan; data->auto_fan = control->auto_fan; dev_info(&pdev->dev, "enabling support for setting automatic/manual fan control\n"); } if (!fan_mult) { /* * Autodetect fan multiplier based on nominal rpm * If fan reports rpm value too high then set multiplier to 1 */ for (fan = 0; fan < DELL_SMM_NO_FANS; ++fan) { ret = i8k_get_fan_nominal_speed(data, fan, data->i8k_fan_max); if (ret < 0) continue; if (ret > I8K_FAN_MAX_RPM) data->i8k_fan_mult = 1; break; } } else { /* Fan multiplier was specified in module param or in dmi */ data->i8k_fan_mult = fan_mult; } ret = dell_smm_init_hwmon(&pdev->dev); if (ret) return ret; i8k_init_procfs(&pdev->dev); return 0; } static struct platform_driver dell_smm_driver = { .driver = { .name = KBUILD_MODNAME, }, }; static struct platform_device *dell_smm_device; /* * Probe for the presence of a supported laptop. */ static int __init i8k_init(void) { /* * Get DMI information */ if (!dmi_check_system(i8k_dmi_table)) { if (!ignore_dmi && !force) return -ENODEV; pr_info("not running on a supported Dell system.\n"); pr_info("vendor=%s, model=%s, version=%s\n", i8k_get_dmi_data(DMI_SYS_VENDOR), i8k_get_dmi_data(DMI_PRODUCT_NAME), i8k_get_dmi_data(DMI_BIOS_VERSION)); } /* * Get SMM Dell signature */ if (i8k_get_dell_signature(I8K_SMM_GET_DELL_SIG1) && i8k_get_dell_signature(I8K_SMM_GET_DELL_SIG2)) { pr_err("unable to get SMM Dell signature\n"); if (!force) return -ENODEV; } dell_smm_device = platform_create_bundle(&dell_smm_driver, dell_smm_probe, NULL, 0, NULL, 0); return PTR_ERR_OR_ZERO(dell_smm_device); } static void __exit i8k_exit(void) { platform_device_unregister(dell_smm_device); platform_driver_unregister(&dell_smm_driver); } module_init(i8k_init); module_exit(i8k_exit);