// SPDX-License-Identifier: MIT /* * Copyright © 2008-2015 Intel Corporation */ #include "i915_drv.h" #include "i915_reg.h" #include "i915_scatterlist.h" #include "i915_pvinfo.h" #include "i915_vgpu.h" #include "intel_gt_regs.h" /** * DOC: fence register handling * * Important to avoid confusions: "fences" in the i915 driver are not execution * fences used to track command completion but hardware detiler objects which * wrap a given range of the global GTT. Each platform has only a fairly limited * set of these objects. * * Fences are used to detile GTT memory mappings. They're also connected to the * hardware frontbuffer render tracking and hence interact with frontbuffer * compression. Furthermore on older platforms fences are required for tiled * objects used by the display engine. They can also be used by the render * engine - they're required for blitter commands and are optional for render * commands. But on gen4+ both display (with the exception of fbc) and rendering * have their own tiling state bits and don't need fences. * * Also note that fences only support X and Y tiling and hence can't be used for * the fancier new tiling formats like W, Ys and Yf. * * Finally note that because fences are such a restricted resource they're * dynamically associated with objects. Furthermore fence state is committed to * the hardware lazily to avoid unnecessary stalls on gen2/3. Therefore code must * explicitly call i915_gem_object_get_fence() to synchronize fencing status * for cpu access. Also note that some code wants an unfenced view, for those * cases the fence can be removed forcefully with i915_gem_object_put_fence(). * * Internally these functions will synchronize with userspace access by removing * CPU ptes into GTT mmaps (not the GTT ptes themselves) as needed. */ #define pipelined 0 static struct drm_i915_private *fence_to_i915(struct i915_fence_reg *fence) { return fence->ggtt->vm.i915; } static struct intel_uncore *fence_to_uncore(struct i915_fence_reg *fence) { return fence->ggtt->vm.gt->uncore; } static void i965_write_fence_reg(struct i915_fence_reg *fence) { i915_reg_t fence_reg_lo, fence_reg_hi; int fence_pitch_shift; u64 val; if (GRAPHICS_VER(fence_to_i915(fence)) >= 6) { fence_reg_lo = FENCE_REG_GEN6_LO(fence->id); fence_reg_hi = FENCE_REG_GEN6_HI(fence->id); fence_pitch_shift = GEN6_FENCE_PITCH_SHIFT; } else { fence_reg_lo = FENCE_REG_965_LO(fence->id); fence_reg_hi = FENCE_REG_965_HI(fence->id); fence_pitch_shift = I965_FENCE_PITCH_SHIFT; } val = 0; if (fence->tiling) { unsigned int stride = fence->stride; GEM_BUG_ON(!IS_ALIGNED(stride, 128)); val = fence->start + fence->size - I965_FENCE_PAGE; val <<= 32; val |= fence->start; val |= (u64)((stride / 128) - 1) << fence_pitch_shift; if (fence->tiling == I915_TILING_Y) val |= BIT(I965_FENCE_TILING_Y_SHIFT); val |= I965_FENCE_REG_VALID; } if (!pipelined) { struct intel_uncore *uncore = fence_to_uncore(fence); /* * To w/a incoherency with non-atomic 64-bit register updates, * we split the 64-bit update into two 32-bit writes. In order * for a partial fence not to be evaluated between writes, we * precede the update with write to turn off the fence register, * and only enable the fence as the last step. * * For extra levels of paranoia, we make sure each step lands * before applying the next step. */ intel_uncore_write_fw(uncore, fence_reg_lo, 0); intel_uncore_posting_read_fw(uncore, fence_reg_lo); intel_uncore_write_fw(uncore, fence_reg_hi, upper_32_bits(val)); intel_uncore_write_fw(uncore, fence_reg_lo, lower_32_bits(val)); intel_uncore_posting_read_fw(uncore, fence_reg_lo); } } static void i915_write_fence_reg(struct i915_fence_reg *fence) { u32 val; val = 0; if (fence->tiling) { unsigned int stride = fence->stride; unsigned int tiling = fence->tiling; bool is_y_tiled = tiling == I915_TILING_Y; if (is_y_tiled && HAS_128_BYTE_Y_TILING(fence_to_i915(fence))) stride /= 128; else stride /= 512; GEM_BUG_ON(!is_power_of_2(stride)); val = fence->start; if (is_y_tiled) val |= BIT(I830_FENCE_TILING_Y_SHIFT); val |= I915_FENCE_SIZE_BITS(fence->size); val |= ilog2(stride) << I830_FENCE_PITCH_SHIFT; val |= I830_FENCE_REG_VALID; } if (!pipelined) { struct intel_uncore *uncore = fence_to_uncore(fence); i915_reg_t reg = FENCE_REG(fence->id); intel_uncore_write_fw(uncore, reg, val); intel_uncore_posting_read_fw(uncore, reg); } } static void i830_write_fence_reg(struct i915_fence_reg *fence) { u32 val; val = 0; if (fence->tiling) { unsigned int stride = fence->stride; val = fence->start; if (fence->tiling == I915_TILING_Y) val |= BIT(I830_FENCE_TILING_Y_SHIFT); val |= I830_FENCE_SIZE_BITS(fence->size); val |= ilog2(stride / 128) << I830_FENCE_PITCH_SHIFT; val |= I830_FENCE_REG_VALID; } if (!pipelined) { struct intel_uncore *uncore = fence_to_uncore(fence); i915_reg_t reg = FENCE_REG(fence->id); intel_uncore_write_fw(uncore, reg, val); intel_uncore_posting_read_fw(uncore, reg); } } static void fence_write(struct i915_fence_reg *fence) { struct drm_i915_private *i915 = fence_to_i915(fence); /* * Previous access through the fence register is marshalled by * the mb() inside the fault handlers (i915_gem_release_mmaps) * and explicitly managed for internal users. */ if (GRAPHICS_VER(i915) == 2) i830_write_fence_reg(fence); else if (GRAPHICS_VER(i915) == 3) i915_write_fence_reg(fence); else i965_write_fence_reg(fence); /* * Access through the fenced region afterwards is * ordered by the posting reads whilst writing the registers. */ } static bool gpu_uses_fence_registers(struct i915_fence_reg *fence) { return GRAPHICS_VER(fence_to_i915(fence)) < 4; } static int fence_update(struct i915_fence_reg *fence, struct i915_vma *vma) { struct i915_ggtt *ggtt = fence->ggtt; struct intel_uncore *uncore = fence_to_uncore(fence); intel_wakeref_t wakeref; struct i915_vma *old; int ret; fence->tiling = 0; if (vma) { GEM_BUG_ON(!i915_gem_object_get_stride(vma->obj) || !i915_gem_object_get_tiling(vma->obj)); if (!i915_vma_is_map_and_fenceable(vma)) return -EINVAL; if (gpu_uses_fence_registers(fence)) { /* implicit 'unfenced' GPU blits */ ret = i915_vma_sync(vma); if (ret) return ret; } fence->start = vma->node.start; fence->size = vma->fence_size; fence->stride = i915_gem_object_get_stride(vma->obj); fence->tiling = i915_gem_object_get_tiling(vma->obj); } WRITE_ONCE(fence->dirty, false); old = xchg(&fence->vma, NULL); if (old) { /* XXX Ideally we would move the waiting to outside the mutex */ ret = i915_active_wait(&fence->active); if (ret) { fence->vma = old; return ret; } i915_vma_flush_writes(old); /* * Ensure that all userspace CPU access is completed before * stealing the fence. */ if (old != vma) { GEM_BUG_ON(old->fence != fence); i915_vma_revoke_mmap(old); old->fence = NULL; } list_move(&fence->link, &ggtt->fence_list); } /* * We only need to update the register itself if the device is awake. * If the device is currently powered down, we will defer the write * to the runtime resume, see intel_ggtt_restore_fences(). * * This only works for removing the fence register, on acquisition * the caller must hold the rpm wakeref. The fence register must * be cleared before we can use any other fences to ensure that * the new fences do not overlap the elided clears, confusing HW. */ wakeref = intel_runtime_pm_get_if_in_use(uncore->rpm); if (!wakeref) { GEM_BUG_ON(vma); return 0; } WRITE_ONCE(fence->vma, vma); fence_write(fence); if (vma) { vma->fence = fence; list_move_tail(&fence->link, &ggtt->fence_list); } intel_runtime_pm_put(uncore->rpm, wakeref); return 0; } /** * i915_vma_revoke_fence - force-remove fence for a VMA * @vma: vma to map linearly (not through a fence reg) * * This function force-removes any fence from the given object, which is useful * if the kernel wants to do untiled GTT access. */ void i915_vma_revoke_fence(struct i915_vma *vma) { struct i915_fence_reg *fence = vma->fence; intel_wakeref_t wakeref; lockdep_assert_held(&vma->vm->mutex); if (!fence) return; GEM_BUG_ON(fence->vma != vma); GEM_BUG_ON(!i915_active_is_idle(&fence->active)); GEM_BUG_ON(atomic_read(&fence->pin_count)); fence->tiling = 0; WRITE_ONCE(fence->vma, NULL); vma->fence = NULL; /* * Skip the write to HW if and only if the device is currently * suspended. * * If the driver does not currently hold a wakeref (if_in_use == 0), * the device may currently be runtime suspended, or it may be woken * up before the suspend takes place. If the device is not suspended * (powered down) and we skip clearing the fence register, the HW is * left in an undefined state where we may end up with multiple * registers overlapping. */ with_intel_runtime_pm_if_active(fence_to_uncore(fence)->rpm, wakeref) fence_write(fence); } static bool fence_is_active(const struct i915_fence_reg *fence) { return fence->vma && i915_vma_is_active(fence->vma); } static struct i915_fence_reg *fence_find(struct i915_ggtt *ggtt) { struct i915_fence_reg *active = NULL; struct i915_fence_reg *fence, *fn; list_for_each_entry_safe(fence, fn, &ggtt->fence_list, link) { GEM_BUG_ON(fence->vma && fence->vma->fence != fence); if (fence == active) /* now seen this fence twice */ active = ERR_PTR(-EAGAIN); /* Prefer idle fences so we do not have to wait on the GPU */ if (active != ERR_PTR(-EAGAIN) && fence_is_active(fence)) { if (!active) active = fence; list_move_tail(&fence->link, &ggtt->fence_list); continue; } if (atomic_read(&fence->pin_count)) continue; return fence; } /* Wait for completion of pending flips which consume fences */ if (intel_has_pending_fb_unpin(ggtt->vm.i915)) return ERR_PTR(-EAGAIN); return ERR_PTR(-ENOBUFS); } int __i915_vma_pin_fence(struct i915_vma *vma) { struct i915_ggtt *ggtt = i915_vm_to_ggtt(vma->vm); struct i915_fence_reg *fence; struct i915_vma *set = i915_gem_object_is_tiled(vma->obj) ? vma : NULL; int err; lockdep_assert_held(&vma->vm->mutex); /* Just update our place in the LRU if our fence is getting reused. */ if (vma->fence) { fence = vma->fence; GEM_BUG_ON(fence->vma != vma); atomic_inc(&fence->pin_count); if (!fence->dirty) { list_move_tail(&fence->link, &ggtt->fence_list); return 0; } } else if (set) { fence = fence_find(ggtt); if (IS_ERR(fence)) return PTR_ERR(fence); GEM_BUG_ON(atomic_read(&fence->pin_count)); atomic_inc(&fence->pin_count); } else { return 0; } err = fence_update(fence, set); if (err) goto out_unpin; GEM_BUG_ON(fence->vma != set); GEM_BUG_ON(vma->fence != (set ? fence : NULL)); if (set) return 0; out_unpin: atomic_dec(&fence->pin_count); return err; } /** * i915_vma_pin_fence - set up fencing for a vma * @vma: vma to map through a fence reg * * When mapping objects through the GTT, userspace wants to be able to write * to them without having to worry about swizzling if the object is tiled. * This function walks the fence regs looking for a free one for @obj, * stealing one if it can't find any. * * It then sets up the reg based on the object's properties: address, pitch * and tiling format. * * For an untiled surface, this removes any existing fence. * * Returns: * * 0 on success, negative error code on failure. */ int i915_vma_pin_fence(struct i915_vma *vma) { int err; if (!vma->fence && !i915_gem_object_is_tiled(vma->obj)) return 0; /* * Note that we revoke fences on runtime suspend. Therefore the user * must keep the device awake whilst using the fence. */ assert_rpm_wakelock_held(vma->vm->gt->uncore->rpm); GEM_BUG_ON(!i915_vma_is_pinned(vma)); GEM_BUG_ON(!i915_vma_is_ggtt(vma)); err = mutex_lock_interruptible(&vma->vm->mutex); if (err) return err; err = __i915_vma_pin_fence(vma); mutex_unlock(&vma->vm->mutex); return err; } /** * i915_reserve_fence - Reserve a fence for vGPU * @ggtt: Global GTT * * This function walks the fence regs looking for a free one and remove * it from the fence_list. It is used to reserve fence for vGPU to use. */ struct i915_fence_reg *i915_reserve_fence(struct i915_ggtt *ggtt) { struct i915_fence_reg *fence; int count; int ret; lockdep_assert_held(&ggtt->vm.mutex); /* Keep at least one fence available for the display engine. */ count = 0; list_for_each_entry(fence, &ggtt->fence_list, link) count += !atomic_read(&fence->pin_count); if (count <= 1) return ERR_PTR(-ENOSPC); fence = fence_find(ggtt); if (IS_ERR(fence)) return fence; if (fence->vma) { /* Force-remove fence from VMA */ ret = fence_update(fence, NULL); if (ret) return ERR_PTR(ret); } list_del(&fence->link); return fence; } /** * i915_unreserve_fence - Reclaim a reserved fence * @fence: the fence reg * * This function add a reserved fence register from vGPU to the fence_list. */ void i915_unreserve_fence(struct i915_fence_reg *fence) { struct i915_ggtt *ggtt = fence->ggtt; lockdep_assert_held(&ggtt->vm.mutex); list_add(&fence->link, &ggtt->fence_list); } /** * intel_ggtt_restore_fences - restore fence state * @ggtt: Global GTT * * Restore the hw fence state to match the software tracking again, to be called * after a gpu reset and on resume. Note that on runtime suspend we only cancel * the fences, to be reacquired by the user later. */ void intel_ggtt_restore_fences(struct i915_ggtt *ggtt) { int i; for (i = 0; i < ggtt->num_fences; i++) fence_write(&ggtt->fence_regs[i]); } /** * DOC: tiling swizzling details * * The idea behind tiling is to increase cache hit rates by rearranging * pixel data so that a group of pixel accesses are in the same cacheline. * Performance improvement from doing this on the back/depth buffer are on * the order of 30%. * * Intel architectures make this somewhat more complicated, though, by * adjustments made to addressing of data when the memory is in interleaved * mode (matched pairs of DIMMS) to improve memory bandwidth. * For interleaved memory, the CPU sends every sequential 64 bytes * to an alternate memory channel so it can get the bandwidth from both. * * The GPU also rearranges its accesses for increased bandwidth to interleaved * memory, and it matches what the CPU does for non-tiled. However, when tiled * it does it a little differently, since one walks addresses not just in the * X direction but also Y. So, along with alternating channels when bit * 6 of the address flips, it also alternates when other bits flip -- Bits 9 * (every 512 bytes, an X tile scanline) and 10 (every two X tile scanlines) * are common to both the 915 and 965-class hardware. * * The CPU also sometimes XORs in higher bits as well, to improve * bandwidth doing strided access like we do so frequently in graphics. This * is called "Channel XOR Randomization" in the MCH documentation. The result * is that the CPU is XORing in either bit 11 or bit 17 to bit 6 of its address * decode. * * All of this bit 6 XORing has an effect on our memory management, * as we need to make sure that the 3d driver can correctly address object * contents. * * If we don't have interleaved memory, all tiling is safe and no swizzling is * required. * * When bit 17 is XORed in, we simply refuse to tile at all. Bit * 17 is not just a page offset, so as we page an object out and back in, * individual pages in it will have different bit 17 addresses, resulting in * each 64 bytes being swapped with its neighbor! * * Otherwise, if interleaved, we have to tell the 3d driver what the address * swizzling it needs to do is, since it's writing with the CPU to the pages * (bit 6 and potentially bit 11 XORed in), and the GPU is reading from the * pages (bit 6, 9, and 10 XORed in), resulting in a cumulative bit swizzling * required by the CPU of XORing in bit 6, 9, 10, and potentially 11, in order * to match what the GPU expects. */ /** * detect_bit_6_swizzle - detect bit 6 swizzling pattern * @ggtt: Global GGTT * * Detects bit 6 swizzling of address lookup between IGD access and CPU * access through main memory. */ static void detect_bit_6_swizzle(struct i915_ggtt *ggtt) { struct intel_uncore *uncore = ggtt->vm.gt->uncore; struct drm_i915_private *i915 = ggtt->vm.i915; u32 swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN; u32 swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN; if (GRAPHICS_VER(i915) >= 8 || IS_VALLEYVIEW(i915)) { /* * On BDW+, swizzling is not used. We leave the CPU memory * controller in charge of optimizing memory accesses without * the extra address manipulation GPU side. * * VLV and CHV don't have GPU swizzling. */ swizzle_x = I915_BIT_6_SWIZZLE_NONE; swizzle_y = I915_BIT_6_SWIZZLE_NONE; } else if (GRAPHICS_VER(i915) >= 6) { if (i915->preserve_bios_swizzle) { if (intel_uncore_read(uncore, DISP_ARB_CTL) & DISP_TILE_SURFACE_SWIZZLING) { swizzle_x = I915_BIT_6_SWIZZLE_9_10; swizzle_y = I915_BIT_6_SWIZZLE_9; } else { swizzle_x = I915_BIT_6_SWIZZLE_NONE; swizzle_y = I915_BIT_6_SWIZZLE_NONE; } } else { u32 dimm_c0, dimm_c1; dimm_c0 = intel_uncore_read(uncore, MAD_DIMM_C0); dimm_c1 = intel_uncore_read(uncore, MAD_DIMM_C1); dimm_c0 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK; dimm_c1 &= MAD_DIMM_A_SIZE_MASK | MAD_DIMM_B_SIZE_MASK; /* * Enable swizzling when the channels are populated * with identically sized dimms. We don't need to check * the 3rd channel because no cpu with gpu attached * ships in that configuration. Also, swizzling only * makes sense for 2 channels anyway. */ if (dimm_c0 == dimm_c1) { swizzle_x = I915_BIT_6_SWIZZLE_9_10; swizzle_y = I915_BIT_6_SWIZZLE_9; } else { swizzle_x = I915_BIT_6_SWIZZLE_NONE; swizzle_y = I915_BIT_6_SWIZZLE_NONE; } } } else if (GRAPHICS_VER(i915) == 5) { /* * On Ironlake whatever DRAM config, GPU always do * same swizzling setup. */ swizzle_x = I915_BIT_6_SWIZZLE_9_10; swizzle_y = I915_BIT_6_SWIZZLE_9; } else if (GRAPHICS_VER(i915) == 2) { /* * As far as we know, the 865 doesn't have these bit 6 * swizzling issues. */ swizzle_x = I915_BIT_6_SWIZZLE_NONE; swizzle_y = I915_BIT_6_SWIZZLE_NONE; } else if (IS_G45(i915) || IS_I965G(i915) || IS_G33(i915)) { /* * The 965, G33, and newer, have a very flexible memory * configuration. It will enable dual-channel mode * (interleaving) on as much memory as it can, and the GPU * will additionally sometimes enable different bit 6 * swizzling for tiled objects from the CPU. * * Here's what I found on the G965: * slot fill memory size swizzling * 0A 0B 1A 1B 1-ch 2-ch * 512 0 0 0 512 0 O * 512 0 512 0 16 1008 X * 512 0 0 512 16 1008 X * 0 512 0 512 16 1008 X * 1024 1024 1024 0 2048 1024 O * * We could probably detect this based on either the DRB * matching, which was the case for the swizzling required in * the table above, or from the 1-ch value being less than * the minimum size of a rank. * * Reports indicate that the swizzling actually * varies depending upon page placement inside the * channels, i.e. we see swizzled pages where the * banks of memory are paired and unswizzled on the * uneven portion, so leave that as unknown. */ if (intel_uncore_read16(uncore, C0DRB3_BW) == intel_uncore_read16(uncore, C1DRB3_BW)) { swizzle_x = I915_BIT_6_SWIZZLE_9_10; swizzle_y = I915_BIT_6_SWIZZLE_9; } } else { u32 dcc = intel_uncore_read(uncore, DCC); /* * On 9xx chipsets, channel interleave by the CPU is * determined by DCC. For single-channel, neither the CPU * nor the GPU do swizzling. For dual channel interleaved, * the GPU's interleave is bit 9 and 10 for X tiled, and bit * 9 for Y tiled. The CPU's interleave is independent, and * can be based on either bit 11 (haven't seen this yet) or * bit 17 (common). */ switch (dcc & DCC_ADDRESSING_MODE_MASK) { case DCC_ADDRESSING_MODE_SINGLE_CHANNEL: case DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC: swizzle_x = I915_BIT_6_SWIZZLE_NONE; swizzle_y = I915_BIT_6_SWIZZLE_NONE; break; case DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED: if (dcc & DCC_CHANNEL_XOR_DISABLE) { /* * This is the base swizzling by the GPU for * tiled buffers. */ swizzle_x = I915_BIT_6_SWIZZLE_9_10; swizzle_y = I915_BIT_6_SWIZZLE_9; } else if ((dcc & DCC_CHANNEL_XOR_BIT_17) == 0) { /* Bit 11 swizzling by the CPU in addition. */ swizzle_x = I915_BIT_6_SWIZZLE_9_10_11; swizzle_y = I915_BIT_6_SWIZZLE_9_11; } else { /* Bit 17 swizzling by the CPU in addition. */ swizzle_x = I915_BIT_6_SWIZZLE_9_10_17; swizzle_y = I915_BIT_6_SWIZZLE_9_17; } break; } /* check for L-shaped memory aka modified enhanced addressing */ if (GRAPHICS_VER(i915) == 4 && !(intel_uncore_read(uncore, DCC2) & DCC2_MODIFIED_ENHANCED_DISABLE)) { swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN; swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN; } if (dcc == 0xffffffff) { drm_err(&i915->drm, "Couldn't read from MCHBAR. " "Disabling tiling.\n"); swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN; swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN; } } if (swizzle_x == I915_BIT_6_SWIZZLE_UNKNOWN || swizzle_y == I915_BIT_6_SWIZZLE_UNKNOWN) { /* * Userspace likes to explode if it sees unknown swizzling, * so lie. We will finish the lie when reporting through * the get-tiling-ioctl by reporting the physical swizzle * mode as unknown instead. * * As we don't strictly know what the swizzling is, it may be * bit17 dependent, and so we need to also prevent the pages * from being moved. */ i915->quirks |= QUIRK_PIN_SWIZZLED_PAGES; swizzle_x = I915_BIT_6_SWIZZLE_NONE; swizzle_y = I915_BIT_6_SWIZZLE_NONE; } i915->ggtt.bit_6_swizzle_x = swizzle_x; i915->ggtt.bit_6_swizzle_y = swizzle_y; } /* * Swap every 64 bytes of this page around, to account for it having a new * bit 17 of its physical address and therefore being interpreted differently * by the GPU. */ static void swizzle_page(struct page *page) { char temp[64]; char *vaddr; int i; vaddr = kmap(page); for (i = 0; i < PAGE_SIZE; i += 128) { memcpy(temp, &vaddr[i], 64); memcpy(&vaddr[i], &vaddr[i + 64], 64); memcpy(&vaddr[i + 64], temp, 64); } kunmap(page); } /** * i915_gem_object_do_bit_17_swizzle - fixup bit 17 swizzling * @obj: i915 GEM buffer object * @pages: the scattergather list of physical pages * * This function fixes up the swizzling in case any page frame number for this * object has changed in bit 17 since that state has been saved with * i915_gem_object_save_bit_17_swizzle(). * * This is called when pinning backing storage again, since the kernel is free * to move unpinned backing storage around (either by directly moving pages or * by swapping them out and back in again). */ void i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj, struct sg_table *pages) { struct sgt_iter sgt_iter; struct page *page; int i; if (obj->bit_17 == NULL) return; i = 0; for_each_sgt_page(page, sgt_iter, pages) { char new_bit_17 = page_to_phys(page) >> 17; if ((new_bit_17 & 0x1) != (test_bit(i, obj->bit_17) != 0)) { swizzle_page(page); set_page_dirty(page); } i++; } } /** * i915_gem_object_save_bit_17_swizzle - save bit 17 swizzling * @obj: i915 GEM buffer object * @pages: the scattergather list of physical pages * * This function saves the bit 17 of each page frame number so that swizzling * can be fixed up later on with i915_gem_object_do_bit_17_swizzle(). This must * be called before the backing storage can be unpinned. */ void i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj, struct sg_table *pages) { const unsigned int page_count = obj->base.size >> PAGE_SHIFT; struct sgt_iter sgt_iter; struct page *page; int i; if (obj->bit_17 == NULL) { obj->bit_17 = bitmap_zalloc(page_count, GFP_KERNEL); if (obj->bit_17 == NULL) { DRM_ERROR("Failed to allocate memory for bit 17 " "record\n"); return; } } i = 0; for_each_sgt_page(page, sgt_iter, pages) { if (page_to_phys(page) & (1 << 17)) __set_bit(i, obj->bit_17); else __clear_bit(i, obj->bit_17); i++; } } void intel_ggtt_init_fences(struct i915_ggtt *ggtt) { struct drm_i915_private *i915 = ggtt->vm.i915; struct intel_uncore *uncore = ggtt->vm.gt->uncore; int num_fences; int i; INIT_LIST_HEAD(&ggtt->fence_list); INIT_LIST_HEAD(&ggtt->userfault_list); intel_wakeref_auto_init(&ggtt->userfault_wakeref, uncore->rpm); detect_bit_6_swizzle(ggtt); if (!i915_ggtt_has_aperture(ggtt)) num_fences = 0; else if (GRAPHICS_VER(i915) >= 7 && !(IS_VALLEYVIEW(i915) || IS_CHERRYVIEW(i915))) num_fences = 32; else if (GRAPHICS_VER(i915) >= 4 || IS_I945G(i915) || IS_I945GM(i915) || IS_G33(i915) || IS_PINEVIEW(i915)) num_fences = 16; else num_fences = 8; if (intel_vgpu_active(i915)) num_fences = intel_uncore_read(uncore, vgtif_reg(avail_rs.fence_num)); ggtt->fence_regs = kcalloc(num_fences, sizeof(*ggtt->fence_regs), GFP_KERNEL); if (!ggtt->fence_regs) num_fences = 0; /* Initialize fence registers to zero */ for (i = 0; i < num_fences; i++) { struct i915_fence_reg *fence = &ggtt->fence_regs[i]; i915_active_init(&fence->active, NULL, NULL, 0); fence->ggtt = ggtt; fence->id = i; list_add_tail(&fence->link, &ggtt->fence_list); } ggtt->num_fences = num_fences; intel_ggtt_restore_fences(ggtt); } void intel_ggtt_fini_fences(struct i915_ggtt *ggtt) { int i; for (i = 0; i < ggtt->num_fences; i++) { struct i915_fence_reg *fence = &ggtt->fence_regs[i]; i915_active_fini(&fence->active); } kfree(ggtt->fence_regs); } void intel_gt_init_swizzling(struct intel_gt *gt) { struct drm_i915_private *i915 = gt->i915; struct intel_uncore *uncore = gt->uncore; if (GRAPHICS_VER(i915) < 5 || i915->ggtt.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_NONE) return; intel_uncore_rmw(uncore, DISP_ARB_CTL, 0, DISP_TILE_SURFACE_SWIZZLING); if (GRAPHICS_VER(i915) == 5) return; intel_uncore_rmw(uncore, TILECTL, 0, TILECTL_SWZCTL); if (GRAPHICS_VER(i915) == 6) intel_uncore_write(uncore, ARB_MODE, _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_SNB)); else if (GRAPHICS_VER(i915) == 7) intel_uncore_write(uncore, ARB_MODE, _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_IVB)); else if (GRAPHICS_VER(i915) == 8) intel_uncore_write(uncore, GAMTARBMODE, _MASKED_BIT_ENABLE(ARB_MODE_SWIZZLE_BDW)); else MISSING_CASE(GRAPHICS_VER(i915)); }