// SPDX-License-Identifier: GPL-2.0-or-later // Copyright IBM Corp // Copyright ASPEED Technology #define pr_fmt(fmt) "clk-ast2600: " fmt #include <linux/mfd/syscon.h> #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/slab.h> #include <dt-bindings/clock/ast2600-clock.h> #include "clk-aspeed.h" #define ASPEED_G6_NUM_CLKS 71 #define ASPEED_G6_SILICON_REV 0x004 #define ASPEED_G6_RESET_CTRL 0x040 #define ASPEED_G6_RESET_CTRL2 0x050 #define ASPEED_G6_CLK_STOP_CTRL 0x080 #define ASPEED_G6_CLK_STOP_CTRL2 0x090 #define ASPEED_G6_MISC_CTRL 0x0C0 #define UART_DIV13_EN BIT(12) #define ASPEED_G6_CLK_SELECTION1 0x300 #define ASPEED_G6_CLK_SELECTION2 0x304 #define ASPEED_G6_CLK_SELECTION4 0x310 #define ASPEED_HPLL_PARAM 0x200 #define ASPEED_APLL_PARAM 0x210 #define ASPEED_MPLL_PARAM 0x220 #define ASPEED_EPLL_PARAM 0x240 #define ASPEED_DPLL_PARAM 0x260 #define ASPEED_G6_STRAP1 0x500 #define ASPEED_MAC12_CLK_DLY 0x340 #define ASPEED_MAC34_CLK_DLY 0x350 /* Globally visible clocks */ static DEFINE_SPINLOCK(aspeed_g6_clk_lock); /* Keeps track of all clocks */ static struct clk_hw_onecell_data *aspeed_g6_clk_data; static void __iomem *scu_g6_base; /* * Clocks marked with CLK_IS_CRITICAL: * * ref0 and ref1 are essential for the SoC to operate * mpll is required if SDRAM is used */ static const struct aspeed_gate_data aspeed_g6_gates[] = { /* clk rst name parent flags */ [ASPEED_CLK_GATE_MCLK] = { 0, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */ [ASPEED_CLK_GATE_ECLK] = { 1, -1, "eclk-gate", "eclk", 0 }, /* Video Engine */ [ASPEED_CLK_GATE_GCLK] = { 2, 7, "gclk-gate", NULL, 0 }, /* 2D engine */ /* vclk parent - dclk/d1clk/hclk/mclk */ [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */ [ASPEED_CLK_GATE_BCLK] = { 4, 8, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */ /* From dpll */ [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, CLK_IS_CRITICAL }, /* DAC */ [ASPEED_CLK_GATE_REF0CLK] = { 6, -1, "ref0clk-gate", "clkin", CLK_IS_CRITICAL }, [ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate", NULL, 0 }, /* USB2.0 Host port 2 */ /* Reserved 8 */ [ASPEED_CLK_GATE_USBUHCICLK] = { 9, 15, "usb-uhci-gate", NULL, 0 }, /* USB1.1 (requires port 2 enabled) */ /* From dpll/epll/40mhz usb p1 phy/gpioc6/dp phy pll */ [ASPEED_CLK_GATE_D1CLK] = { 10, 13, "d1clk-gate", "d1clk", 0 }, /* GFX CRT */ /* Reserved 11/12 */ [ASPEED_CLK_GATE_YCLK] = { 13, 4, "yclk-gate", NULL, 0 }, /* HAC */ [ASPEED_CLK_GATE_USBPORT1CLK] = { 14, 14, "usb-port1-gate", NULL, 0 }, /* USB2 hub/USB2 host port 1/USB1.1 dev */ [ASPEED_CLK_GATE_UART5CLK] = { 15, -1, "uart5clk-gate", "uart", 0 }, /* UART5 */ /* Reserved 16/19 */ [ASPEED_CLK_GATE_MAC1CLK] = { 20, 11, "mac1clk-gate", "mac12", 0 }, /* MAC1 */ [ASPEED_CLK_GATE_MAC2CLK] = { 21, 12, "mac2clk-gate", "mac12", 0 }, /* MAC2 */ /* Reserved 22/23 */ [ASPEED_CLK_GATE_RSACLK] = { 24, 4, "rsaclk-gate", NULL, 0 }, /* HAC */ [ASPEED_CLK_GATE_RVASCLK] = { 25, 9, "rvasclk-gate", NULL, 0 }, /* RVAS */ /* Reserved 26 */ [ASPEED_CLK_GATE_EMMCCLK] = { 27, 16, "emmcclk-gate", NULL, 0 }, /* For card clk */ /* Reserved 28/29/30 */ [ASPEED_CLK_GATE_LCLK] = { 32, 32, "lclk-gate", NULL, 0 }, /* LPC */ [ASPEED_CLK_GATE_ESPICLK] = { 33, -1, "espiclk-gate", NULL, 0 }, /* eSPI */ [ASPEED_CLK_GATE_REF1CLK] = { 34, -1, "ref1clk-gate", "clkin", CLK_IS_CRITICAL }, /* Reserved 35 */ [ASPEED_CLK_GATE_SDCLK] = { 36, 56, "sdclk-gate", NULL, 0 }, /* SDIO/SD */ [ASPEED_CLK_GATE_LHCCLK] = { 37, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */ /* Reserved 38 RSA: no longer used */ /* Reserved 39 */ [ASPEED_CLK_GATE_I3C0CLK] = { 40, 40, "i3c0clk-gate", NULL, 0 }, /* I3C0 */ [ASPEED_CLK_GATE_I3C1CLK] = { 41, 41, "i3c1clk-gate", NULL, 0 }, /* I3C1 */ [ASPEED_CLK_GATE_I3C2CLK] = { 42, 42, "i3c2clk-gate", NULL, 0 }, /* I3C2 */ [ASPEED_CLK_GATE_I3C3CLK] = { 43, 43, "i3c3clk-gate", NULL, 0 }, /* I3C3 */ [ASPEED_CLK_GATE_I3C4CLK] = { 44, 44, "i3c4clk-gate", NULL, 0 }, /* I3C4 */ [ASPEED_CLK_GATE_I3C5CLK] = { 45, 45, "i3c5clk-gate", NULL, 0 }, /* I3C5 */ [ASPEED_CLK_GATE_I3C6CLK] = { 46, 46, "i3c6clk-gate", NULL, 0 }, /* I3C6 */ [ASPEED_CLK_GATE_I3C7CLK] = { 47, 47, "i3c7clk-gate", NULL, 0 }, /* I3C7 */ [ASPEED_CLK_GATE_UART1CLK] = { 48, -1, "uart1clk-gate", "uart", 0 }, /* UART1 */ [ASPEED_CLK_GATE_UART2CLK] = { 49, -1, "uart2clk-gate", "uart", 0 }, /* UART2 */ [ASPEED_CLK_GATE_UART3CLK] = { 50, -1, "uart3clk-gate", "uart", 0 }, /* UART3 */ [ASPEED_CLK_GATE_UART4CLK] = { 51, -1, "uart4clk-gate", "uart", 0 }, /* UART4 */ [ASPEED_CLK_GATE_MAC3CLK] = { 52, 52, "mac3clk-gate", "mac34", 0 }, /* MAC3 */ [ASPEED_CLK_GATE_MAC4CLK] = { 53, 53, "mac4clk-gate", "mac34", 0 }, /* MAC4 */ [ASPEED_CLK_GATE_UART6CLK] = { 54, -1, "uart6clk-gate", "uartx", 0 }, /* UART6 */ [ASPEED_CLK_GATE_UART7CLK] = { 55, -1, "uart7clk-gate", "uartx", 0 }, /* UART7 */ [ASPEED_CLK_GATE_UART8CLK] = { 56, -1, "uart8clk-gate", "uartx", 0 }, /* UART8 */ [ASPEED_CLK_GATE_UART9CLK] = { 57, -1, "uart9clk-gate", "uartx", 0 }, /* UART9 */ [ASPEED_CLK_GATE_UART10CLK] = { 58, -1, "uart10clk-gate", "uartx", 0 }, /* UART10 */ [ASPEED_CLK_GATE_UART11CLK] = { 59, -1, "uart11clk-gate", "uartx", 0 }, /* UART11 */ [ASPEED_CLK_GATE_UART12CLK] = { 60, -1, "uart12clk-gate", "uartx", 0 }, /* UART12 */ [ASPEED_CLK_GATE_UART13CLK] = { 61, -1, "uart13clk-gate", "uartx", 0 }, /* UART13 */ [ASPEED_CLK_GATE_FSICLK] = { 62, 59, "fsiclk-gate", NULL, 0 }, /* FSI */ }; static const struct clk_div_table ast2600_eclk_div_table[] = { { 0x0, 2 }, { 0x1, 2 }, { 0x2, 3 }, { 0x3, 4 }, { 0x4, 5 }, { 0x5, 6 }, { 0x6, 7 }, { 0x7, 8 }, { 0 } }; static const struct clk_div_table ast2600_mac_div_table[] = { { 0x0, 4 }, { 0x1, 4 }, { 0x2, 6 }, { 0x3, 8 }, { 0x4, 10 }, { 0x5, 12 }, { 0x6, 14 }, { 0x7, 16 }, { 0 } }; static const struct clk_div_table ast2600_div_table[] = { { 0x0, 4 }, { 0x1, 8 }, { 0x2, 12 }, { 0x3, 16 }, { 0x4, 20 }, { 0x5, 24 }, { 0x6, 28 }, { 0x7, 32 }, { 0 } }; /* For hpll/dpll/epll/mpll */ static struct clk_hw *ast2600_calc_pll(const char *name, u32 val) { unsigned int mult, div; if (val & BIT(24)) { /* Pass through mode */ mult = div = 1; } else { /* F = 25Mhz * [(M + 2) / (n + 1)] / (p + 1) */ u32 m = val & 0x1fff; u32 n = (val >> 13) & 0x3f; u32 p = (val >> 19) & 0xf; mult = (m + 1) / (n + 1); div = (p + 1); } return clk_hw_register_fixed_factor(NULL, name, "clkin", 0, mult, div); }; static struct clk_hw *ast2600_calc_apll(const char *name, u32 val) { unsigned int mult, div; if (val & BIT(20)) { /* Pass through mode */ mult = div = 1; } else { /* F = 25Mhz * (2-od) * [(m + 2) / (n + 1)] */ u32 m = (val >> 5) & 0x3f; u32 od = (val >> 4) & 0x1; u32 n = val & 0xf; mult = (2 - od) * (m + 2); div = n + 1; } return clk_hw_register_fixed_factor(NULL, name, "clkin", 0, mult, div); }; static u32 get_bit(u8 idx) { return BIT(idx % 32); } static u32 get_reset_reg(struct aspeed_clk_gate *gate) { if (gate->reset_idx < 32) return ASPEED_G6_RESET_CTRL; return ASPEED_G6_RESET_CTRL2; } static u32 get_clock_reg(struct aspeed_clk_gate *gate) { if (gate->clock_idx < 32) return ASPEED_G6_CLK_STOP_CTRL; return ASPEED_G6_CLK_STOP_CTRL2; } static int aspeed_g6_clk_is_enabled(struct clk_hw *hw) { struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); u32 clk = get_bit(gate->clock_idx); u32 rst = get_bit(gate->reset_idx); u32 reg; u32 enval; /* * If the IP is in reset, treat the clock as not enabled, * this happens with some clocks such as the USB one when * coming from cold reset. Without this, aspeed_clk_enable() * will fail to lift the reset. */ if (gate->reset_idx >= 0) { regmap_read(gate->map, get_reset_reg(gate), ®); if (reg & rst) return 0; } regmap_read(gate->map, get_clock_reg(gate), ®); enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk; return ((reg & clk) == enval) ? 1 : 0; } static int aspeed_g6_clk_enable(struct clk_hw *hw) { struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); unsigned long flags; u32 clk = get_bit(gate->clock_idx); u32 rst = get_bit(gate->reset_idx); spin_lock_irqsave(gate->lock, flags); if (aspeed_g6_clk_is_enabled(hw)) { spin_unlock_irqrestore(gate->lock, flags); return 0; } if (gate->reset_idx >= 0) { /* Put IP in reset */ regmap_write(gate->map, get_reset_reg(gate), rst); /* Delay 100us */ udelay(100); } /* Enable clock */ if (gate->flags & CLK_GATE_SET_TO_DISABLE) { /* Clock is clear to enable, so use set to clear register */ regmap_write(gate->map, get_clock_reg(gate) + 0x04, clk); } else { /* Clock is set to enable, so use write to set register */ regmap_write(gate->map, get_clock_reg(gate), clk); } if (gate->reset_idx >= 0) { /* A delay of 10ms is specified by the ASPEED docs */ mdelay(10); /* Take IP out of reset */ regmap_write(gate->map, get_reset_reg(gate) + 0x4, rst); } spin_unlock_irqrestore(gate->lock, flags); return 0; } static void aspeed_g6_clk_disable(struct clk_hw *hw) { struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); unsigned long flags; u32 clk = get_bit(gate->clock_idx); spin_lock_irqsave(gate->lock, flags); if (gate->flags & CLK_GATE_SET_TO_DISABLE) { regmap_write(gate->map, get_clock_reg(gate), clk); } else { /* Use set to clear register */ regmap_write(gate->map, get_clock_reg(gate) + 0x4, clk); } spin_unlock_irqrestore(gate->lock, flags); } static const struct clk_ops aspeed_g6_clk_gate_ops = { .enable = aspeed_g6_clk_enable, .disable = aspeed_g6_clk_disable, .is_enabled = aspeed_g6_clk_is_enabled, }; static int aspeed_g6_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id) { struct aspeed_reset *ar = to_aspeed_reset(rcdev); u32 rst = get_bit(id); u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL; /* Use set to clear register */ return regmap_write(ar->map, reg + 0x04, rst); } static int aspeed_g6_reset_assert(struct reset_controller_dev *rcdev, unsigned long id) { struct aspeed_reset *ar = to_aspeed_reset(rcdev); u32 rst = get_bit(id); u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL; return regmap_write(ar->map, reg, rst); } static int aspeed_g6_reset_status(struct reset_controller_dev *rcdev, unsigned long id) { struct aspeed_reset *ar = to_aspeed_reset(rcdev); int ret; u32 val; u32 rst = get_bit(id); u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL; ret = regmap_read(ar->map, reg, &val); if (ret) return ret; return !!(val & rst); } static const struct reset_control_ops aspeed_g6_reset_ops = { .assert = aspeed_g6_reset_assert, .deassert = aspeed_g6_reset_deassert, .status = aspeed_g6_reset_status, }; static struct clk_hw *aspeed_g6_clk_hw_register_gate(struct device *dev, const char *name, const char *parent_name, unsigned long flags, struct regmap *map, u8 clock_idx, u8 reset_idx, u8 clk_gate_flags, spinlock_t *lock) { struct aspeed_clk_gate *gate; struct clk_init_data init; struct clk_hw *hw; int ret; gate = kzalloc(sizeof(*gate), GFP_KERNEL); if (!gate) return ERR_PTR(-ENOMEM); init.name = name; init.ops = &aspeed_g6_clk_gate_ops; init.flags = flags; init.parent_names = parent_name ? &parent_name : NULL; init.num_parents = parent_name ? 1 : 0; gate->map = map; gate->clock_idx = clock_idx; gate->reset_idx = reset_idx; gate->flags = clk_gate_flags; gate->lock = lock; gate->hw.init = &init; hw = &gate->hw; ret = clk_hw_register(dev, hw); if (ret) { kfree(gate); hw = ERR_PTR(ret); } return hw; } static const char * const vclk_parent_names[] = { "dpll", "d1pll", "hclk", "mclk", }; static const char * const d1clk_parent_names[] = { "dpll", "epll", "usb-phy-40m", "gpioc6_clkin", "dp_phy_pll", }; static int aspeed_g6_clk_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct aspeed_reset *ar; struct regmap *map; struct clk_hw *hw; u32 val, rate; int i, ret; map = syscon_node_to_regmap(dev->of_node); if (IS_ERR(map)) { dev_err(dev, "no syscon regmap\n"); return PTR_ERR(map); } ar = devm_kzalloc(dev, sizeof(*ar), GFP_KERNEL); if (!ar) return -ENOMEM; ar->map = map; ar->rcdev.owner = THIS_MODULE; ar->rcdev.nr_resets = 64; ar->rcdev.ops = &aspeed_g6_reset_ops; ar->rcdev.of_node = dev->of_node; ret = devm_reset_controller_register(dev, &ar->rcdev); if (ret) { dev_err(dev, "could not register reset controller\n"); return ret; } /* UART clock div13 setting */ regmap_read(map, ASPEED_G6_MISC_CTRL, &val); if (val & UART_DIV13_EN) rate = 24000000 / 13; else rate = 24000000; hw = clk_hw_register_fixed_rate(dev, "uart", NULL, 0, rate); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_UART] = hw; /* UART6~13 clock div13 setting */ regmap_read(map, 0x80, &val); if (val & BIT(31)) rate = 24000000 / 13; else rate = 24000000; hw = clk_hw_register_fixed_rate(dev, "uartx", NULL, 0, rate); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_UARTX] = hw; /* EMMC ext clock divider */ hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "hpll", 0, scu_g6_base + ASPEED_G6_CLK_SELECTION1, 15, 0, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); hw = clk_hw_register_divider_table(dev, "emmc_extclk", "emmc_extclk_gate", 0, scu_g6_base + ASPEED_G6_CLK_SELECTION1, 12, 3, 0, ast2600_div_table, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_EMMC] = hw; /* SD/SDIO clock divider and gate */ hw = clk_hw_register_gate(dev, "sd_extclk_gate", "hpll", 0, scu_g6_base + ASPEED_G6_CLK_SELECTION4, 31, 0, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); hw = clk_hw_register_divider_table(dev, "sd_extclk", "sd_extclk_gate", 0, scu_g6_base + ASPEED_G6_CLK_SELECTION4, 28, 3, 0, ast2600_div_table, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_SDIO] = hw; /* MAC1/2 RMII 50MHz RCLK */ hw = clk_hw_register_fixed_rate(dev, "mac12rclk", "hpll", 0, 50000000); if (IS_ERR(hw)) return PTR_ERR(hw); /* MAC1/2 AHB bus clock divider */ hw = clk_hw_register_divider_table(dev, "mac12", "hpll", 0, scu_g6_base + ASPEED_G6_CLK_SELECTION1, 16, 3, 0, ast2600_mac_div_table, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_MAC12] = hw; /* RMII1 50MHz (RCLK) output enable */ hw = clk_hw_register_gate(dev, "mac1rclk", "mac12rclk", 0, scu_g6_base + ASPEED_MAC12_CLK_DLY, 29, 0, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_MAC1RCLK] = hw; /* RMII2 50MHz (RCLK) output enable */ hw = clk_hw_register_gate(dev, "mac2rclk", "mac12rclk", 0, scu_g6_base + ASPEED_MAC12_CLK_DLY, 30, 0, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_MAC2RCLK] = hw; /* MAC1/2 RMII 50MHz RCLK */ hw = clk_hw_register_fixed_rate(dev, "mac34rclk", "hclk", 0, 50000000); if (IS_ERR(hw)) return PTR_ERR(hw); /* MAC3/4 AHB bus clock divider */ hw = clk_hw_register_divider_table(dev, "mac34", "hpll", 0, scu_g6_base + 0x310, 24, 3, 0, ast2600_mac_div_table, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_MAC34] = hw; /* RMII3 50MHz (RCLK) output enable */ hw = clk_hw_register_gate(dev, "mac3rclk", "mac34rclk", 0, scu_g6_base + ASPEED_MAC34_CLK_DLY, 29, 0, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_MAC3RCLK] = hw; /* RMII4 50MHz (RCLK) output enable */ hw = clk_hw_register_gate(dev, "mac4rclk", "mac34rclk", 0, scu_g6_base + ASPEED_MAC34_CLK_DLY, 30, 0, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_MAC4RCLK] = hw; /* LPC Host (LHCLK) clock divider */ hw = clk_hw_register_divider_table(dev, "lhclk", "hpll", 0, scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0, ast2600_div_table, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_LHCLK] = hw; /* gfx d1clk : use dp clk */ regmap_update_bits(map, ASPEED_G6_CLK_SELECTION1, GENMASK(10, 8), BIT(10)); /* SoC Display clock selection */ hw = clk_hw_register_mux(dev, "d1clk", d1clk_parent_names, ARRAY_SIZE(d1clk_parent_names), 0, scu_g6_base + ASPEED_G6_CLK_SELECTION1, 8, 3, 0, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_D1CLK] = hw; /* d1 clk div 0x308[17:15] x [14:12] - 8,7,6,5,4,3,2,1 */ regmap_write(map, 0x308, 0x12000); /* 3x3 = 9 */ /* P-Bus (BCLK) clock divider */ hw = clk_hw_register_divider_table(dev, "bclk", "hpll", 0, scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0, ast2600_div_table, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_BCLK] = hw; /* Video Capture clock selection */ hw = clk_hw_register_mux(dev, "vclk", vclk_parent_names, ARRAY_SIZE(vclk_parent_names), 0, scu_g6_base + ASPEED_G6_CLK_SELECTION2, 12, 3, 0, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_VCLK] = hw; /* Video Engine clock divider */ hw = clk_hw_register_divider_table(dev, "eclk", NULL, 0, scu_g6_base + ASPEED_G6_CLK_SELECTION1, 28, 3, 0, ast2600_eclk_div_table, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[ASPEED_CLK_ECLK] = hw; for (i = 0; i < ARRAY_SIZE(aspeed_g6_gates); i++) { const struct aspeed_gate_data *gd = &aspeed_g6_gates[i]; u32 gate_flags; /* * Special case: the USB port 1 clock (bit 14) is always * working the opposite way from the other ones. */ gate_flags = (gd->clock_idx == 14) ? 0 : CLK_GATE_SET_TO_DISABLE; hw = aspeed_g6_clk_hw_register_gate(dev, gd->name, gd->parent_name, gd->flags, map, gd->clock_idx, gd->reset_idx, gate_flags, &aspeed_g6_clk_lock); if (IS_ERR(hw)) return PTR_ERR(hw); aspeed_g6_clk_data->hws[i] = hw; } return 0; }; static const struct of_device_id aspeed_g6_clk_dt_ids[] = { { .compatible = "aspeed,ast2600-scu" }, { } }; static struct platform_driver aspeed_g6_clk_driver = { .probe = aspeed_g6_clk_probe, .driver = { .name = "ast2600-clk", .of_match_table = aspeed_g6_clk_dt_ids, .suppress_bind_attrs = true, }, }; builtin_platform_driver(aspeed_g6_clk_driver); static const u32 ast2600_a0_axi_ahb_div_table[] = { 2, 2, 3, 5, }; static const u32 ast2600_a1_axi_ahb_div_table[] = { 4, 6, 2, 4, }; static void __init aspeed_g6_cc(struct regmap *map) { struct clk_hw *hw; u32 val, div, chip_id, axi_div, ahb_div; clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, 25000000); /* * High-speed PLL clock derived from the crystal. This the CPU clock, * and we assume that it is enabled */ regmap_read(map, ASPEED_HPLL_PARAM, &val); aspeed_g6_clk_data->hws[ASPEED_CLK_HPLL] = ast2600_calc_pll("hpll", val); regmap_read(map, ASPEED_MPLL_PARAM, &val); aspeed_g6_clk_data->hws[ASPEED_CLK_MPLL] = ast2600_calc_pll("mpll", val); regmap_read(map, ASPEED_DPLL_PARAM, &val); aspeed_g6_clk_data->hws[ASPEED_CLK_DPLL] = ast2600_calc_pll("dpll", val); regmap_read(map, ASPEED_EPLL_PARAM, &val); aspeed_g6_clk_data->hws[ASPEED_CLK_EPLL] = ast2600_calc_pll("epll", val); regmap_read(map, ASPEED_APLL_PARAM, &val); aspeed_g6_clk_data->hws[ASPEED_CLK_APLL] = ast2600_calc_apll("apll", val); /* Strap bits 12:11 define the AXI/AHB clock frequency ratio (aka HCLK)*/ regmap_read(map, ASPEED_G6_STRAP1, &val); if (val & BIT(16)) axi_div = 1; else axi_div = 2; regmap_read(map, ASPEED_G6_SILICON_REV, &chip_id); if (chip_id & BIT(16)) ahb_div = ast2600_a1_axi_ahb_div_table[(val >> 11) & 0x3]; else ahb_div = ast2600_a0_axi_ahb_div_table[(val >> 11) & 0x3]; hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, axi_div * ahb_div); aspeed_g6_clk_data->hws[ASPEED_CLK_AHB] = hw; regmap_read(map, ASPEED_G6_CLK_SELECTION1, &val); val = (val >> 23) & 0x7; div = 4 * (val + 1); hw = clk_hw_register_fixed_factor(NULL, "apb1", "hpll", 0, 1, div); aspeed_g6_clk_data->hws[ASPEED_CLK_APB1] = hw; regmap_read(map, ASPEED_G6_CLK_SELECTION4, &val); val = (val >> 9) & 0x7; div = 2 * (val + 1); hw = clk_hw_register_fixed_factor(NULL, "apb2", "ahb", 0, 1, div); aspeed_g6_clk_data->hws[ASPEED_CLK_APB2] = hw; /* USB 2.0 port1 phy 40MHz clock */ hw = clk_hw_register_fixed_rate(NULL, "usb-phy-40m", NULL, 0, 40000000); aspeed_g6_clk_data->hws[ASPEED_CLK_USBPHY_40M] = hw; }; static void __init aspeed_g6_cc_init(struct device_node *np) { struct regmap *map; int ret; int i; scu_g6_base = of_iomap(np, 0); if (!scu_g6_base) return; aspeed_g6_clk_data = kzalloc(struct_size(aspeed_g6_clk_data, hws, ASPEED_G6_NUM_CLKS), GFP_KERNEL); if (!aspeed_g6_clk_data) return; /* * This way all clocks fetched before the platform device probes, * except those we assign here for early use, will be deferred. */ for (i = 0; i < ASPEED_G6_NUM_CLKS; i++) aspeed_g6_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER); /* * We check that the regmap works on this very first access, * but as this is an MMIO-backed regmap, subsequent regmap * access is not going to fail and we skip error checks from * this point. */ map = syscon_node_to_regmap(np); if (IS_ERR(map)) { pr_err("no syscon regmap\n"); return; } aspeed_g6_cc(map); aspeed_g6_clk_data->num = ASPEED_G6_NUM_CLKS; ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, aspeed_g6_clk_data); if (ret) pr_err("failed to add DT provider: %d\n", ret); }; CLK_OF_DECLARE_DRIVER(aspeed_cc_g6, "aspeed,ast2600-scu", aspeed_g6_cc_init);