/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_X86_PGTABLE_3LEVEL_H #define _ASM_X86_PGTABLE_3LEVEL_H /* * Intel Physical Address Extension (PAE) Mode - three-level page * tables on PPro+ CPUs. * * Copyright (C) 1999 Ingo Molnar */ #define pte_ERROR(e) \ pr_err("%s:%d: bad pte %p(%08lx%08lx)\n", \ __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low) #define pmd_ERROR(e) \ pr_err("%s:%d: bad pmd %p(%016Lx)\n", \ __FILE__, __LINE__, &(e), pmd_val(e)) #define pgd_ERROR(e) \ pr_err("%s:%d: bad pgd %p(%016Lx)\n", \ __FILE__, __LINE__, &(e), pgd_val(e)) /* Rules for using set_pte: the pte being assigned *must* be * either not present or in a state where the hardware will * not attempt to update the pte. In places where this is * not possible, use pte_get_and_clear to obtain the old pte * value and then use set_pte to update it. -ben */ static inline void native_set_pte(pte_t *ptep, pte_t pte) { ptep->pte_high = pte.pte_high; smp_wmb(); ptep->pte_low = pte.pte_low; } static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte) { set_64bit((unsigned long long *)(ptep), native_pte_val(pte)); } static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd) { set_64bit((unsigned long long *)(pmdp), native_pmd_val(pmd)); } static inline void native_set_pud(pud_t *pudp, pud_t pud) { #ifdef CONFIG_PAGE_TABLE_ISOLATION pud.p4d.pgd = pti_set_user_pgtbl(&pudp->p4d.pgd, pud.p4d.pgd); #endif set_64bit((unsigned long long *)(pudp), native_pud_val(pud)); } /* * For PTEs and PDEs, we must clear the P-bit first when clearing a page table * entry, so clear the bottom half first and enforce ordering with a compiler * barrier. */ static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { ptep->pte_low = 0; smp_wmb(); ptep->pte_high = 0; } static inline void native_pmd_clear(pmd_t *pmdp) { pmdp->pmd_low = 0; smp_wmb(); pmdp->pmd_high = 0; } static inline void native_pud_clear(pud_t *pudp) { } static inline void pud_clear(pud_t *pudp) { set_pud(pudp, __pud(0)); /* * According to Intel App note "TLBs, Paging-Structure Caches, * and Their Invalidation", April 2007, document 317080-001, * section 8.1: in PAE mode we explicitly have to flush the * TLB via cr3 if the top-level pgd is changed... * * Currently all places where pud_clear() is called either have * flush_tlb_mm() followed or don't need TLB flush (x86_64 code or * pud_clear_bad()), so we don't need TLB flush here. */ } #ifdef CONFIG_SMP static inline pte_t native_ptep_get_and_clear(pte_t *ptep) { pte_t old = *ptep; do { } while (!try_cmpxchg64(&ptep->pte, &old.pte, 0ULL)); return old; } #else #define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp) #endif #ifdef CONFIG_SMP static inline pmd_t native_pmdp_get_and_clear(pmd_t *pmdp) { pmd_t res; /* xchg acts as a barrier before setting of the high bits */ res.pmd_low = xchg(&pmdp->pmd_low, 0); res.pmd_high = READ_ONCE(pmdp->pmd_high); WRITE_ONCE(pmdp->pmd_high, 0); return res; } #else #define native_pmdp_get_and_clear(xp) native_local_pmdp_get_and_clear(xp) #endif #ifndef pmdp_establish #define pmdp_establish pmdp_establish static inline pmd_t pmdp_establish(struct vm_area_struct *vma, unsigned long address, pmd_t *pmdp, pmd_t pmd) { pmd_t old; /* * If pmd has present bit cleared we can get away without expensive * cmpxchg64: we can update pmdp half-by-half without racing with * anybody. */ if (!(pmd_val(pmd) & _PAGE_PRESENT)) { /* xchg acts as a barrier before setting of the high bits */ old.pmd_low = xchg(&pmdp->pmd_low, pmd.pmd_low); old.pmd_high = READ_ONCE(pmdp->pmd_high); WRITE_ONCE(pmdp->pmd_high, pmd.pmd_high); return old; } do { old = *pmdp; } while (cmpxchg64(&pmdp->pmd, old.pmd, pmd.pmd) != old.pmd); return old; } #endif #ifdef CONFIG_SMP union split_pud { struct { u32 pud_low; u32 pud_high; }; pud_t pud; }; static inline pud_t native_pudp_get_and_clear(pud_t *pudp) { union split_pud res, *orig = (union split_pud *)pudp; #ifdef CONFIG_PAGE_TABLE_ISOLATION pti_set_user_pgtbl(&pudp->p4d.pgd, __pgd(0)); #endif /* xchg acts as a barrier before setting of the high bits */ res.pud_low = xchg(&orig->pud_low, 0); res.pud_high = orig->pud_high; orig->pud_high = 0; return res.pud; } #else #define native_pudp_get_and_clear(xp) native_local_pudp_get_and_clear(xp) #endif /* Encode and de-code a swap entry */ #define SWP_TYPE_BITS 5 #define SWP_OFFSET_FIRST_BIT (_PAGE_BIT_PROTNONE + 1) /* We always extract/encode the offset by shifting it all the way up, and then down again */ #define SWP_OFFSET_SHIFT (SWP_OFFSET_FIRST_BIT + SWP_TYPE_BITS) #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS) #define __swp_type(x) (((x).val) & ((1UL << SWP_TYPE_BITS) - 1)) #define __swp_offset(x) ((x).val >> SWP_TYPE_BITS) #define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) << SWP_TYPE_BITS}) /* * Normally, __swp_entry() converts from arch-independent swp_entry_t to * arch-dependent swp_entry_t, and __swp_entry_to_pte() just stores the result * to pte. But here we have 32bit swp_entry_t and 64bit pte, and need to use the * whole 64 bits. Thus, we shift the "real" arch-dependent conversion to * __swp_entry_to_pte() through the following helper macro based on 64bit * __swp_entry(). */ #define __swp_pteval_entry(type, offset) ((pteval_t) { \ (~(pteval_t)(offset) << SWP_OFFSET_SHIFT >> SWP_TYPE_BITS) \ | ((pteval_t)(type) << (64 - SWP_TYPE_BITS)) }) #define __swp_entry_to_pte(x) ((pte_t){ .pte = \ __swp_pteval_entry(__swp_type(x), __swp_offset(x)) }) /* * Analogically, __pte_to_swp_entry() doesn't just extract the arch-dependent * swp_entry_t, but also has to convert it from 64bit to the 32bit * intermediate representation, using the following macros based on 64bit * __swp_type() and __swp_offset(). */ #define __pteval_swp_type(x) ((unsigned long)((x).pte >> (64 - SWP_TYPE_BITS))) #define __pteval_swp_offset(x) ((unsigned long)(~((x).pte) << SWP_TYPE_BITS >> SWP_OFFSET_SHIFT)) #define __pte_to_swp_entry(pte) (__swp_entry(__pteval_swp_type(pte), \ __pteval_swp_offset(pte))) #include #endif /* _ASM_X86_PGTABLE_3LEVEL_H */