// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
 * Copyright (C) 2022 StarFive Technology Co., Ltd.
 * Copyright (C) 2022 Hal Feng <hal.feng@starfivetech.com>
 */

/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/starfive,jh7110-pinfunc.h>
#include "jh7110.dtsi"
#include "codecs/sf_pwmdac.dtsi"

/ {
	model = "StarFive VisionFive V2";
	compatible = "starfive,visionfive-v2", "starfive,jh7110";

	aliases {
		spi0 = &qspi;
		gpio0 = &gpio;
		ethernet0 = &gmac0;
		ethernet1 = &gmac1;
		mmc0 = &mmc0;
		mmc1 = &mmc1;
		serial0 = &uart0;
		serial3 = &uart3;
		i2c0 = &i2c0;
		i2c1 = &i2c1;
		i2c2 = &i2c2;
		i2c3 = &i2c3;
		i2c4 = &i2c4;
		i2c5 = &i2c5;
		i2c6 = &i2c6;
	};

	chosen {
		linux,initrd-start = <0x0 0x46100000>;
		linux,initrd-end = <0x0 0x4c000000>;
		stdout-path = "serial0:115200";
		#bootargs = "debug console=ttyS0 rootwait";
	};

	cpus {
		timebase-frequency = <4000000>;
	};

	memory@40000000 {
		device_type = "memory";
		reg = <0x0 0x40000000 0x1 0x0>;
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		linux,cma {
			compatible = "shared-dma-pool";
			reusable;
			size = <0x0 0x20000000>;
			alignment = <0x0 0x1000>;
			alloc-ranges = <0x0 0x70000000 0x0 0x20000000>;
			linux,cma-default;
		};

		e24_mem: e24@c0000000 {
			reg = <0x0 0x6ce00000 0x0 0x1600000>;
		};

		xrp_reserved: xrpbuffer@f0000000 {
			reg = <0x0 0x69c00000 0x0 0x01ffffff
				0x0 0x6bc00000 0x0 0x00001000
				0x0 0x6bc01000 0x0 0x00fff000
				0x0 0x6cc00000 0x0 0x00001000>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led-ack {
			gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_HEARTBEAT;
			linux,default-trigger = "heartbeat";
			label = "ack";
		};
	};

	thermal-zones {
		cpu-thermal {
			polling-delay-passive = <250>;
			polling-delay = <15000>;

			thermal-sensors = <&sfctemp>;

			trips {
				cpu_alert0: cpu_alert0 {
					/* milliCelsius */
					temperature = <85000>;
					hysteresis = <2000>;
					type = "passive";
				};

				cpu_crit: cpu_crit {
					/* milliCelsius */
					temperature = <100000>;
					hysteresis = <0>;
					type = "critical";
				};
			};

			cooling-maps {
				map0 {
					trip = <&cpu_alert0>;
					cooling-device =
						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
						<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};
	};
};

&gpio {
	i2c0_pins: i2c0-pins {
		i2c0-pins-scl {
			starfive,pins = <PAD_GPIO57>;
			starfive,pinmux = <PAD_GPIO57_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1) | (GPIO_PU(1)))>;
			starfive,pin-gpio-dout = <GPO_LOW>;
			starfive,pin-gpio-doen = <OEN_I2C0_IC_CLK_OE>;
			starfive,pin-gpio-din =  <GPI_I2C0_IC_CLK_IN_A>;
		};

		i2c0-pins-sda {
			starfive,pins = <PAD_GPIO58>;
			starfive,pinmux = <PAD_GPIO58_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1) | (GPIO_PU(1)))>;
			starfive,pin-gpio-dout = <GPO_LOW>;
			starfive,pin-gpio-doen = <OEN_I2C0_IC_DATA_OE>;
			starfive,pin-gpio-din =  <GPI_I2C0_IC_DATA_IN_A>;
		};
	};

	i2c5_pins: i2c5-pins {
		i2c5-pins-scl {
			starfive,pins = <PAD_GPIO19>;
			starfive,pinmux = <PAD_GPIO19_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1) | (GPIO_PU(1)))>;
			starfive,pin-gpio-dout = <GPO_LOW>;
			starfive,pin-gpio-doen = <OEN_I2C5_IC_CLK_OE>;
			starfive,pin-gpio-din =  <GPI_I2C5_IC_CLK_IN_A>;
		};

		i2c5-pins-sda {
			starfive,pins = <PAD_GPIO20>;
			starfive,pinmux = <PAD_GPIO20_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1) | (GPIO_PU(1)))>;
			starfive,pin-gpio-dout = <GPO_LOW>;
			starfive,pin-gpio-doen = <OEN_I2C5_IC_DATA_OE>;
			starfive,pin-gpio-din =  <GPI_I2C5_IC_DATA_IN_A>;
		};
	};

	i2c6_pins: i2c6-pins {
		i2c6-pins-scl {
			starfive,pins = <PAD_GPIO16>;
			starfive,pinmux = <PAD_GPIO16_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1) | (GPIO_PU(1)))>;
			starfive,pin-gpio-dout = <GPO_LOW>;
			starfive,pin-gpio-doen = <OEN_I2C6_IC_CLK_OE>;
			starfive,pin-gpio-din =  <GPI_I2C6_IC_CLK_IN_A>;
		};

		i2c6-pins-sda {
			starfive,pins = <PAD_GPIO17>;
			starfive,pinmux = <PAD_GPIO17_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1) | (GPIO_PU(1)))>;
			starfive,pin-gpio-dout = <GPO_LOW>;
			starfive,pin-gpio-doen = <OEN_I2C6_IC_DATA_OE>;
			starfive,pin-gpio-din =  <GPI_I2C6_IC_DATA_IN_A>;
		};
	};

	pwmdac0_pins: pwmdac0-pins {
		pwmdac0-pins-left {
			starfive,pins = <PAD_GPIO33>;
			starfive,pinmux = <PAD_GPIO33_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1) | (GPIO_PU(1)))>;
			starfive,pin-gpio-dout = <GPO_PWMDAC0_LEFT_OUTPUT>;
			starfive,pin-gpio-doen = <OEN_LOW>;
		};

		pwmdac0-pins-right {
			starfive,pins = <PAD_GPIO34>;
			starfive,pinmux = <PAD_GPIO34_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1) | (GPIO_PU(1)))>;
			starfive,pin-gpio-dout = <GPO_PWMDAC0_RIGHT_OUTPUT>;
			starfive,pin-gpio-doen = <OEN_LOW>;
		};
	};

	pwm_pins: pwm-pins {
		pwm_ch0-pins {
			starfive,pins = <PAD_GPIO46>;
			starfive,pinmux = <PAD_GPIO46_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-dout = <GPO_PTC0_PWM_0>;
			starfive,pin-gpio-doen = <OEN_PTC0_PWM_0_OE_N>;
		};

		pwm_ch1-pins {
			starfive,pins = <PAD_GPIO59>;
			starfive,pinmux = <PAD_GPIO59_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-dout = <GPO_PTC0_PWM_1>;
			starfive,pin-gpio-doen = <OEN_PTC0_PWM_1_OE_N>;
		};
	};

	ssp0_pins: ssp0-pins {
		ssp0-pins_tx {
			starfive,pins = <PAD_GPIO52>;
			starfive,pinmux = <PAD_GPIO52_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-dout = <GPO_SPI0_SSPTXD>;
			starfive,pin-gpio-doen = <OEN_LOW>;
		};

		ssp0-pins_rx {
			starfive,pins = <PAD_GPIO53>;
			starfive,pinmux = <PAD_GPIO53_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-doen = <OEN_HIGH>;
			starfive,pin-gpio-din =  <GPI_SPI0_SSPRXD>;
		};

		ssp0-pins_clk {
			starfive,pins = <PAD_GPIO48>;
			starfive,pinmux = <PAD_GPIO48_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-dout = <GPO_SPI0_SSPCLKOUT>;
			starfive,pin-gpio-doen = <OEN_LOW>;
		};

		ssp0-pins_cs {
			starfive,pins = <PAD_GPIO49>;
			starfive,pinmux = <PAD_GPIO49_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-dout = <GPO_SPI0_SSPFSSOUT>;
			starfive,pin-gpio-doen = <OEN_LOW>;
		};
	};

	pcie0_perst_default: pcie0_perst_default {
		perst-pins {
			starfive,pins = <PAD_GPIO26>;
			starfive,pinmux = <PAD_GPIO26_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-dout = <GPO_HIGH>;
			starfive,pin-gpio-doen = <OEN_LOW>;
		};
	};

	pcie0_perst_active: pcie0_perst_active {
		perst-pins {
			starfive,pins = <PAD_GPIO26>;
			starfive,pinmux = <PAD_GPIO26_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-dout = <GPO_LOW>;
			starfive,pin-gpio-doen = <OEN_LOW>;
		};
	};

	pcie0_wake_default: pcie0_wake_default {
		wake-pins {
			starfive,pins = <PAD_GPIO32>;
			starfive,pinmux = <PAD_GPIO32_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-doen = <OEN_HIGH>;
		};
	};

	pcie0_clkreq_default: pcie0_clkreq_default {
		clkreq-pins {
			starfive,pins = <PAD_GPIO27>;
			starfive,pinmux = <PAD_GPIO27_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-doen = <OEN_HIGH>;
		};
	};

	pcie1_perst_default: pcie1_perst_default {
		perst-pins {
			starfive,pins = <PAD_GPIO28>;
			starfive,pinmux = <PAD_GPIO28_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-dout = <GPO_HIGH>;
			starfive,pin-gpio-doen = <OEN_LOW>;
		};
	};

	pcie1_perst_active: pcie1_perst_active {
		perst-pins {
			starfive,pins = <PAD_GPIO28>;
			starfive,pinmux = <PAD_GPIO28_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-dout = <GPO_LOW>;
			starfive,pin-gpio-doen = <OEN_LOW>;
		};
	};

	pcie1_wake_default: pcie1_wake_default {
		wake-pins {
			starfive,pins = <PAD_GPIO21>;
			starfive,pinmux = <PAD_GPIO21_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-doen = <OEN_HIGH>;
		};
	};

	pcie1_clkreq_default: pcie1_clkreq_default {
		clkreq-pins {
			starfive,pins = <PAD_GPIO29>;
			starfive,pinmux = <PAD_GPIO29_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-doen = <OEN_HIGH>;
		};
	};

	usb_pins: usb-pins {
		drive-vbus-pin {
			starfive,pins = <PAD_GPIO25>;
			starfive,pinmux = <PAD_GPIO25_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-dout = <GPO_USB0_DRIVE_VBUS_IO>;
			starfive,pin-gpio-doen = <OEN_LOW>;
		};
	};

	i2srx_pins: i2srx-pins {
		i2srx-pins0 {
			starfive,pins = <PAD_GPIO61>;
			starfive,pinmux = <PAD_GPIO61_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-doen = <OEN_HIGH>;
			starfive,pin-gpio-din =  <GPI_I2SRX0_EXT_SDIN0>;
		};
	};

	i2s_clk_pins: i2s-clk0 {
		i2s-clk0_bclk {
			starfive,pins = <PAD_GPIO38>;
			starfive,pinmux = <PAD_GPIO38_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-din = <GPI_I2STX0_BCLK_SLV GPI_I2SRX0_BCLK_SLV>;
			starfive,pin-gpio-doen = <OEN_HIGH>;
		};

		i2s-clk0_lrclk {
			starfive,pins = <PAD_GPIO63>;
			starfive,pinmux = <PAD_GPIO63_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-din = <GPI_I2STX0_LRCK_SLV GPI_I2SRX0_LRCK_SLV>;
			starfive,pin-gpio-doen = <OEN_HIGH>;
		};
	};

	i2stx_pins: i2stx-pins {
		i2stx-pins0 {
			starfive,pins = <PAD_GPIO44>;
			starfive,pinmux = <PAD_GPIO44_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-dout = <GPO_I2STX_4CH1_SDO0>;
			starfive,pin-gpio-doen = <OEN_LOW>;
		};
	};

	tdm0_pins: tdm0-pins {
		tdm0-pins-tx {
			starfive,pins = <PAD_GPIO44>;
			starfive,pinmux = <PAD_GPIO44_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-dout = <GPO_TDM0_PCM_TXD>;
			starfive,pin-gpio-doen = <OEN_LOW>;
		};

		tdm0-pins-rx {
			starfive,pins = <PAD_GPIO61>;
			starfive,pinmux = <PAD_GPIO61_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-doen = <OEN_HIGH>;
			starfive,pin-gpio-din =  <GPI_TDM0_PCM_RXD>;
		};

		tdm0-pins-sync {
			starfive,pins = <PAD_GPIO63>;
			starfive,pinmux = <PAD_GPIO63_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-doen = <OEN_HIGH>;
			starfive,pin-gpio-din = <GPI_TDM0_PCM_SYNCIN>;
		};

		tdm0-pins-pcmclk {
			starfive,pins = <PAD_GPIO38>;
			starfive,pinmux = <PAD_GPIO38_FUNC_SEL 0>;
			starfive,pin-ioconfig = <IO(GPIO_IE(1))>;
			starfive,pin-gpio-doen = <OEN_HIGH>;
			starfive,pin-gpio-din = <GPI_TDM0_CLK_SLV>;
		};
	};
};

&uart0 {
	status = "okay";
};

&dma {
	status = "okay";
};

&trng {
	status = "okay";
};

&crypto {
	status = "okay";
};

&sec_dma {
	status = "okay";
};

&i2c0 {
	clock-frequency = <100000>;
	i2c-sda-hold-time-ns = <300>;
	i2c-sda-falling-time-ns = <510>;
	i2c-scl-falling-time-ns = <510>;
	auto_calc_scl_lhcnt;
	pinctrl-names = "default";
	pinctrl-0 = <&i2c0_pins>;
	status = "okay";
};

&i2c2 {
	clock-frequency = <100000>;
	i2c-sda-hold-time-ns = <300>;
	i2c-sda-falling-time-ns = <510>;
	i2c-scl-falling-time-ns = <510>;
	auto_calc_scl_lhcnt;
	status = "okay";

	seeed_plane_i2c@45 {
		compatible = "seeed_panel";
		reg = <0x45>;

		port {
			panel_out0: endpoint {
				remote-endpoint = <&dsi0_output>;
			};
		};
	};

	tinker_ft5406: tinker_ft5406@38 {
		compatible = "tinker_ft5406";
		reg = <0x38>;
	};

	touchscreen@14 {
		compatible = "goodix,gt911";
		reg = <0x14>;
		irq-gpios = <&gpio 30 GPIO_ACTIVE_HIGH>;
		reset-gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
	};

	panel_radxa@19 {
		compatible ="starfive_jadard";
		reg = <0x19>;
		reset-gpio = <&gpio 23 0>;
		enable-gpio = <&gpio 22 0>;

		port {
			panel_out1: endpoint {
				remote-endpoint = <&dsi1_output>;
			};
		};
	};

};

&i2c5 {
	clock-frequency = <100000>;
	i2c-sda-hold-time-ns = <300>;
	i2c-sda-falling-time-ns = <510>;
	i2c-scl-falling-time-ns = <510>;
	auto_calc_scl_lhcnt;
	pinctrl-names = "default";
	pinctrl-0 = <&i2c5_pins>;
	status = "okay";

	eeprom@50 {
		compatible = "atmel,24c04";
		reg = <0x50>;
		pagesize = <16>;
	};

	pmic: axp15060_reg@36 {
		compatible = "x-powers,axp15060";
		reg = <0x36>;

		regulators {
			mipi_0p9: ALDO1 {
				regulator-boot-on;
				regulator-compatible = "aldo1";
				regulator-name = "mipi_0p9";
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
			};

			hdmi_0p9: ALDO5 {
				regulator-boot-on;
				regulator-compatible = "aldo5";
				regulator-name = "hdmi_0p9";
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
			};

			hdmi_1p8: ALDO3 {
				regulator-boot-on;
				regulator-compatible = "aldo3";
				regulator-name = "hdmi_1p8";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
			};

			sdio_vdd: ALDO4 {
				regulator-boot-on;
				regulator-always-on;
				regulator-compatible = "aldo4";
				regulator-name = "sdio_vdd";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <1800000>;
			};

			vcc_3v3: DCDC1 {
				regulator-boot-on;
				regulator-always-on;
				regulator-compatible = "dcdc1";
				regulator-name = "vcc_3v3";
				regulator-min-microvolt = <3300000>;
				regulator-max-microvolt = <3300000>;
			};

			cpu_vdd: DCDC2 {
				regulator-boot-on;
				regulator-always-on;
				regulator-compatible = "dcdc2";
				regulator-name = "cpu_vdd";
				regulator-min-microvolt = <500000>;
				regulator-max-microvolt = <1540000>;
			};
		};
	};
};

&i2c6 {
	clock-frequency = <100000>;
	i2c-sda-hold-time-ns = <300>;
	i2c-sda-falling-time-ns = <510>;
	i2c-scl-falling-time-ns = <510>;
	auto_calc_scl_lhcnt;
	pinctrl-names = "default";
	pinctrl-0 = <&i2c6_pins>;
	status = "okay";

	imx219: imx219@10 {
		compatible = "sony,imx219";
		reg = <0x10>;
		clocks = <&clk_ext_camera>;
		clock-names = "xclk";
		reset-gpio = <&gpio 18 0>;
		rotation = <0>;
		orientation = <1>; //CAMERA_ORIENTATION_BACK

		port {
			/* CSI2 bus endpoint */
			imx219_to_csi2rx0: endpoint {
				remote-endpoint = <&csi2rx0_from_imx219>;
				bus-type = <4>;      /* MIPI CSI-2 D-PHY */
				clock-lanes = <4>;
				data-lanes = <0 1>;
				lane-polarities = <0 0 0>;
				link-frequencies = /bits/ 64 <456000000>;
			};
		};
	};

	imx708: imx708@1a {
		compatible = "sony,imx708";
		reg = <0x1a>;
		clocks = <&clk_ext_camera>;
		reset-gpio = <&gpio 18 0>;

		port {
			imx708_to_csi2rx0: endpoint {
				remote-endpoint = <&csi2rx0_from_imx708>;
				data-lanes = <1 2>;
				clock-noncontinuous;
				link-frequencies = /bits/ 64 <450000000>;
			};
		};
	};

	ov4689: ov4689@36 {
		compatible = "ovti,ov4689";
		reg = <0x36>;
		clocks = <&clk_ext_camera>;
		clock-names = "xclk";
		rotation = <180>;

		port {
			/* Parallel bus endpoint */
			ov4689_to_csi2rx0: endpoint {
				remote-endpoint = <&csi2rx0_from_ov4689>;
				bus-type = <4>;		/* MIPI CSI-2 D-PHY */
				clock-lanes = <0>;
				data-lanes = <1 2>;
			};
		};
	};
};

&mmc0 {
	max-frequency = <100000000>;
	assigned-clocks = <&clkgen JH7110_SDIO0_CLK_SDCARD>;
	assigned-clock-rates = <50000000>;
	card-detect-delay = <300>;
	bus-width = <8>;
	cap-mmc-highspeed;
	mmc-hs200-1_8v;
	non-removable;
	cap-mmc-hw-reset;
	post-power-on-delay-ms = <200>;
	vmmc-supply = <&vcc_3v3>;
	vqmmc-supply = <&sdio_vdd>;
	status = "okay";
};

&mmc1 {
	max-frequency = <100000000>;
	assigned-clocks = <&clkgen JH7110_SDIO1_CLK_SDCARD>;
	assigned-clock-rates = <50000000>;
	card-detect-delay = <300>;
	bus-width = <4>;
	no-sdio;
	no-mmc;
	broken-cd;
	cap-sd-highspeed;
	post-power-on-delay-ms = <200>;
	status = "okay";
};

&vin_sysctl {
	/* when use dvp open this pinctrl*/
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@1 {
			reg = <1>;
			#address-cells = <1>;
			#size-cells = <0>;

			/* CSI2 bus endpoint */
			csi2rx0_from_imx219: endpoint@0 {
				reg = <0>;
				remote-endpoint = <&imx219_to_csi2rx0>;
				bus-type = <4>;      /* MIPI CSI-2 D-PHY */
				clock-lanes = <4>;
				data-lanes = <0 1>;
				lane-polarities = <0 0 0>;
				status = "okay";
			};

			csi2rx0_from_imx708: endpoint@1 {
				reg = <1>;
				remote-endpoint = <&imx708_to_csi2rx0>;
				bus-type = <4>;      /* MIPI CSI-2 D-PHY */
				clock-lanes = <4>;
				data-lanes = <0 1>;
				lane-polarities = <0 0 0>;
				status = "okay";
			};

			csi2rx0_from_ov4689: endpoint@2 {
				reg = <2>;
				remote-endpoint = <&ov4689_to_csi2rx0>;
				bus-type = <4>;      /* MIPI CSI-2 D-PHY */
				clock-lanes = <4>;
				data-lanes = <0 1>;
				status = "okay";
			};
		};
	};
};

&sfctemp {
	status = "okay";
};

&jpu {
	status = "okay";
};

&vpu_dec {
	status = "okay";
};

&vpu_enc {
	status = "okay";
};

&gmac0 {
	status = "okay";
	#address-cells = <1>;
	#size-cells = <0>;
        clock-names = "gtx",
                      "tx",
                      "ptp_ref",
                      "stmmaceth",
                      "pclk",
                      "gtxc",
                      "rmii_rtx";
        clocks = <&clkgen JH7110_GMAC0_GTXCLK>,
                 <&clkgen JH7110_U0_GMAC5_CLK_TX>,
                 <&clkgen JH7110_GMAC0_PTP>,
                 <&clkgen JH7110_U0_GMAC5_CLK_AHB>,
                 <&clkgen JH7110_U0_GMAC5_CLK_AXI>,
                 <&clkgen JH7110_GMAC0_GTXC>,
                 <&clkgen JH7110_GMAC0_RMII_RTX>;

	phy0: ethernet-phy@0 {
		rgmii_sw_dr_2 = <0x0>;
		rgmii_sw_dr = <0x3>;
		rgmii_sw_dr_rxc = <0x6>;
		rxc_dly_en = <0>;
		rx_delay_sel = <0xa>;
		tx_delay_sel_fe = <5>;
		tx_delay_sel = <0xa>;
		tx_inverted_10 = <0x1>;
		tx_inverted_100 = <0x1>;
		tx_inverted_1000 = <0x1>;
	};
};

&gmac1 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
        clock-names = "gtx",
                      "tx",
                      "ptp_ref",
                      "stmmaceth",
                      "pclk",
                      "gtxc",
                      "rmii_rtx";
        clocks = <&clkgen JH7110_GMAC1_GTXCLK>,
                 <&clkgen JH7110_GMAC5_CLK_TX>,
                 <&clkgen JH7110_GMAC5_CLK_PTP>,
                 <&clkgen JH7110_GMAC5_CLK_AHB>,
                 <&clkgen JH7110_GMAC5_CLK_AXI>,
                 <&clkgen JH7110_GMAC1_GTXC>,
                 <&clkgen JH7110_GMAC1_RMII_RTX>;

	phy1: ethernet-phy@1 {
		rgmii_sw_dr_2 = <0x0>;
		rgmii_sw_dr = <0x3>;
		rgmii_sw_dr_rxc = <0x6>;
		tx_delay_sel_fe = <5>;
		tx_delay_sel = <0>;
		rxc_dly_en = <0>;
		rx_delay_sel = <0x2>;
		tx_inverted_10 = <0x1>;
		tx_inverted_100 = <0x1>;
		tx_inverted_1000 = <0x0>;
	};
};

&gpu {
	status = "okay";
};

&pwmdac {
	pinctrl-names = "default";
	pinctrl-0 = <&pwmdac0_pins>;
	status = "okay";
};

&i2srx_3ch {
	pinctrl-names = "default";
	pinctrl-0 = <&i2s_clk_pins &i2srx_pins>;
	status = "disabled";
};

&i2stx_4ch1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2stx_pins>;
	status = "disabled";
};

&tdm {
	pinctrl-names = "default";
	pinctrl-0 = <&tdm0_pins>;
	status = "disabled";
};

&pwmdac_codec {
	status = "okay";
};

&spi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&ssp0_pins>;
	status = "okay";

	spi_dev0: spi@0 {
		compatible = "rohm,dh2228fv";
		pl022,com-mode = <1>;
		spi-max-frequency = <10000000>;
		reg = <0>;
		status = "okay";
	};
};

&pcie0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pcie0_wake_default>,
		    <&pcie0_clkreq_default>;
	reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&pcie1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pcie1_wake_default>,
		    <&pcie1_clkreq_default>;
	reset-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&mailbox_contrl0 {
	status = "okay";
};

&mailbox_client0 {
	status = "okay";
};

&display {
	status = "okay";
};

&hdmi {
	status = "okay";

	hdmi_in: port {
		#address-cells = <1>;
		#size-cells = <0>;
		hdmi_in_lcdc: endpoint@0 {
			reg = <0>;
			remote-endpoint = <&dc_out_dpi1>;
		};
	};
};

&dc8200 {
	status = "okay";

	dc_out: port {
		#address-cells = <1>;
		#size-cells = <0>;
		dc_out_dpi0: endpoint@0 {
			reg = <0>;
			remote-endpoint = <&hdmi_input0>;
		};
		dc_out_dpi1: endpoint@1 {
			reg = <1>;
			remote-endpoint = <&hdmi_in_lcdc>;
		};

		dc_out_dpi2: endpoint@2 {
			reg = <2>;
			remote-endpoint = <&mipi_in>;
		};
	};
};

&rgb_output {
	status = "disabled";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;
		port@0 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0>;
			hdmi_input0:endpoint@0 {
				reg = <0>;
				remote-endpoint = <&dc_out_dpi0>;
			};
		};
	};
};

&dsi_output {
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;
			mipi_in: endpoint {
				remote-endpoint = <&dc_out_dpi2>;
			};
		};

		port@1 {
			reg = <1>;
			sf_dpi_output: endpoint {
				remote-endpoint = <&dsi_in_port>;
			};
		};
	};
};

&mipi_dsi {
	status = "okay";

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port@0 {
			reg = <0>;
			#address-cells = <1>;
			#size-cells = <0>;

			dsi0_output: endpoint@0 {
				reg = <0>;
				remote-endpoint = <&panel_out0>;
			};

			dsi1_output: endpoint@1 {
				reg = <1>;
				remote-endpoint = <&panel_out1>;
			};

		};

		port@1{
			reg = <1>;
			dsi_in_port: endpoint {
				remote-endpoint = <&sf_dpi_output>;
			};
		};

	};
};

&mipi_dphy {
	status = "okay";
};

&co_process {
	memory-region = <&e24_mem>;
	status = "okay";
};

&usbdrd30 {
	clocks = <&clkgen JH7110_USB_125M>,
		 <&clkgen JH7110_USB0_CLK_APP_125>,
		 <&clkgen JH7110_USB0_CLK_LPM>,
		 <&clkgen JH7110_USB0_CLK_STB>,
		 <&clkgen JH7110_USB0_CLK_USB_APB>,
		 <&clkgen JH7110_USB0_CLK_AXI>,
		 <&clkgen JH7110_USB0_CLK_UTMI_APB>;
	clock-names = "125m","app","lpm","stb","apb","axi","utmi";
	resets = <&rstgen RSTN_U0_CDN_USB_PWRUP>,
		 <&rstgen RSTN_U0_CDN_USB_APB>,
		 <&rstgen RSTN_U0_CDN_USB_AXI>,
		 <&rstgen RSTN_U0_CDN_USB_UTMI_APB>;
	reset-names = "pwrup","apb","axi","utmi";
	starfive,usb2-only;
	dr_mode = "peripheral"; /*host or peripheral*/
	status = "okay";
};

&xrp {
	memory-region = <&xrp_reserved>;
	status = "okay";
};

&ptc {
	pinctrl-names = "default";
	pinctrl-0 = <&pwm_pins>;
	status = "okay";
};

&qspi {
	nor_flash: nor-flash@0 {
	compatible = "jedec,spi-nor";
	reg=<0>;
	cdns,read-delay = <5>;
	spi-max-frequency = <100000000>;
	cdns,tshsl-ns = <1>;
	cdns,tsd2d-ns = <1>;
	cdns,tchsh-ns = <1>;
	cdns,tslch-ns = <1>;
	status = "okay";

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			spl@0 {
				reg = <0x0 0x40000>;
			};
			uboot-env@100000 {
				reg = <0xf0000 0x10000>;
			};
			uboot@100000 {
				reg = <0x100000 0x300000>;
			};
			data@f00000 {
				reg = <0xf00000 0x100000>;
			};
		};
	};
};