// SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2024, Neil Armstrong */ /dts-v1/; #include "sdm450.dtsi" #include "pm8953.dtsi" #include "pmi8950.dtsi" / { model = "Lenovo Smart Tab M10"; compatible = "lenovo,tbx605f", "qcom,sdm450"; chassis-type = "tablet"; chosen { #address-cells = <2>; #size-cells = <2>; ranges; framebuffer@90001000 { compatible = "simple-framebuffer"; reg = <0 0x90001000 0 (1200 * 1920 * 3)>; width = <1200>; height = <1920>; stride = <(1200 * 3)>; format = "r8g8b8"; power-domains = <&gcc MDSS_GDSC>; clocks = <&gcc GCC_MDSS_AHB_CLK>, <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>, <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_BYTE0_CLK>, <&gcc GCC_MDSS_PCLK0_CLK>, <&gcc GCC_MDSS_ESC0_CLK>; }; }; reserved-memory { other_ext_region@0 { no-map; reg = <0x00 0x84500000 0x00 0x2300000>; }; }; gpio-keys { compatible = "gpio-keys"; key-volume-up { label = "volume_up"; gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; linux,code = ; }; }; vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-always-on; regulator-boot-on; }; }; &hsusb_phy { vdd-supply = <&pm8953_l3>; vdda-pll-supply = <&pm8953_l7>; vdda-phy-dpdm-supply = <&pm8953_l13>; status = "okay"; }; &i2c_3 { status = "okay"; touchscreen@38 { compatible = "edt,edt-ft5506"; reg = <0x38>; interrupt-parent = <&tlmm>; interrupts = <65 IRQ_TYPE_EDGE_FALLING>; vcc-supply = <&pm8953_l10>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_active &ts_reset_active>; reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; touchscreen-size-x = <1200>; touchscreen-size-y = <1920>; }; }; &pm8953_resin { linux,code = ; status = "okay"; }; &rpm_requests { regulators { compatible = "qcom,rpm-pm8953-regulators"; vdd_s1-supply = <&vph_pwr>; vdd_s2-supply = <&vph_pwr>; vdd_s3-supply = <&vph_pwr>; vdd_s4-supply = <&vph_pwr>; vdd_s5-supply = <&vph_pwr>; vdd_s6-supply = <&vph_pwr>; vdd_s7-supply = <&vph_pwr>; vdd_l1-supply = <&pm8953_s3>; vdd_l2_l3-supply = <&pm8953_s3>; vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; pm8953_s1: s1 { regulator-min-microvolt = <870000>; regulator-max-microvolt = <1156000>; }; pm8953_s3: s3 { regulator-min-microvolt = <1224000>; regulator-max-microvolt = <1224000>; }; pm8953_s4: s4 { regulator-min-microvolt = <1900000>; regulator-max-microvolt = <2050000>; }; pm8953_l1: l1 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1100000>; }; pm8953_l2: l2 { regulator-min-microvolt = <975000>; regulator-max-microvolt = <1225000>; }; pm8953_l3: l3 { regulator-min-microvolt = <925000>; regulator-max-microvolt = <925000>; }; pm8953_l5: l5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; pm8953_l6: l6 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; pm8953_l7: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1900000>; }; pm8953_l8: l8 { regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; }; pm8953_l9: l9 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; }; pm8953_l10: l10 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; }; pm8953_l11: l11 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; pm8953_l12: l12 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; }; pm8953_l13: l13 { regulator-min-microvolt = <3125000>; regulator-max-microvolt = <3125000>; }; pm8953_l16: l16 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; pm8953_l17: l17 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; }; pm8953_l19: l19 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1350000>; }; pm8953_l22: l22 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2850000>; }; pm8953_l23: l23 { regulator-min-microvolt = <975000>; regulator-max-microvolt = <1225000>; }; }; }; &sdhc_1 { vmmc-supply = <&pm8953_l8>; vqmmc-supply = <&pm8953_l5>; status = "okay"; }; &sdhc_2 { vmmc-supply = <&pm8953_l11>; vqmmc-supply = <&pm8953_l12>; cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; status = "okay"; }; &tlmm { gpio-reserved-ranges = <0 4>, <135 4>; ts_int_active: ts-int-active-state { pins = "gpio65"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; ts_reset_active: ts-reset-active-state { pins = "gpio64"; function = "gpio"; drive-strength = <0x08>; bias-pull-up; }; }; &usb3 { status = "okay"; }; &usb3_dwc3 { dr_mode = "peripheral"; }; &wcnss { vddpx-supply = <&pm8953_l5>; status = "okay"; }; &wcnss_iris { compatible = "qcom,wcn3660b"; vddxo-supply = <&pm8953_l7>; vddrfa-supply = <&pm8953_l19>; vddpa-supply = <&pm8953_l9>; vdddig-supply = <&pm8953_l5>; };