/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA * 02110-1301, USA. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "devices.h" extern struct sys_timer msm_timer; static const resource_size_t qsd8x50_surf_smc91x_base __initdata = 0x70000300; static const unsigned qsd8x50_surf_smc91x_gpio __initdata = 156; /* Leave smc91x resources empty here, as we'll fill them in * at run-time: they vary from board to board, and the true * configuration won't be known until boot. */ static struct resource smc91x_resources[] __initdata = { [0] = { .flags = IORESOURCE_MEM, }, [1] = { .flags = IORESOURCE_IRQ, }, }; static struct platform_device smc91x_device __initdata = { .name = "smc91x", .id = 0, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; static int __init msm_init_smc91x(void) { if (machine_is_qsd8x50_surf()) { smc91x_resources[0].start = qsd8x50_surf_smc91x_base; smc91x_resources[0].end = qsd8x50_surf_smc91x_base + 0xff; smc91x_resources[1].start = gpio_to_irq(qsd8x50_surf_smc91x_gpio); smc91x_resources[1].end = gpio_to_irq(qsd8x50_surf_smc91x_gpio); platform_device_register(&smc91x_device); } return 0; } module_init(msm_init_smc91x); static int hsusb_phy_init_seq[] = { 0x08, 0x31, /* Increase HS Driver Amplitude */ 0x20, 0x32, /* Enable and set Pre-Emphasis Depth to 10% */ -1 }; static struct msm_otg_platform_data msm_otg_pdata = { .phy_init_seq = hsusb_phy_init_seq, .mode = USB_PERIPHERAL, .otg_control = OTG_PHY_CONTROL, }; static struct platform_device *devices[] __initdata = { &msm_device_uart3, &msm_device_smd, &msm_device_otg, &msm_device_hsusb, &msm_device_hsusb_host, }; static struct msm_mmc_gpio sdc1_gpio_cfg[] = { {51, "sdc1_dat_3"}, {52, "sdc1_dat_2"}, {53, "sdc1_dat_1"}, {54, "sdc1_dat_0"}, {55, "sdc1_cmd"}, {56, "sdc1_clk"} }; static struct vreg *vreg_mmc; static unsigned long vreg_sts; static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd) { int rc = 0; struct platform_device *pdev; pdev = container_of(dv, struct platform_device, dev); if (vdd == 0) { if (!vreg_sts) return 0; clear_bit(pdev->id, &vreg_sts); if (!vreg_sts) { rc = vreg_disable(vreg_mmc); if (rc) pr_err("vreg_mmc disable failed for slot " "%d: %d\n", pdev->id, rc); } return 0; } if (!vreg_sts) { rc = vreg_set_level(vreg_mmc, 2900); if (rc) pr_err("vreg_mmc set level failed for slot %d: %d\n", pdev->id, rc); rc = vreg_enable(vreg_mmc); if (rc) pr_err("vreg_mmc enable failed for slot %d: %d\n", pdev->id, rc); } set_bit(pdev->id, &vreg_sts); return 0; } static struct msm_mmc_gpio_data sdc1_gpio = { .gpio = sdc1_gpio_cfg, .size = ARRAY_SIZE(sdc1_gpio_cfg), }; static struct msm_mmc_platform_data qsd8x50_sdc1_data = { .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, .translate_vdd = msm_sdcc_setup_power, .gpio_data = &sdc1_gpio, }; static void __init qsd8x50_init_mmc(void) { if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa()) vreg_mmc = vreg_get(NULL, "gp6"); else vreg_mmc = vreg_get(NULL, "gp5"); if (IS_ERR(vreg_mmc)) { pr_err("vreg get for vreg_mmc failed (%ld)\n", PTR_ERR(vreg_mmc)); return; } msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0); } static void __init qsd8x50_map_io(void) { msm_map_qsd8x50_io(); msm_clock_init(msm_clocks_8x50, msm_num_clocks_8x50); } static void __init qsd8x50_init_irq(void) { msm_init_irq(); msm_init_sirc(); } static void __init qsd8x50_init(void) { msm_device_otg.dev.platform_data = &msm_otg_pdata; msm_device_hsusb.dev.parent = &msm_device_otg.dev; msm_device_hsusb_host.dev.parent = &msm_device_otg.dev; platform_add_devices(devices, ARRAY_SIZE(devices)); qsd8x50_init_mmc(); } MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF") #ifdef CONFIG_MSM_DEBUG_UART #endif .boot_params = PHYS_OFFSET + 0x100, .map_io = qsd8x50_map_io, .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, .timer = &msm_timer, MACHINE_END MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5") #ifdef CONFIG_MSM_DEBUG_UART #endif .boot_params = PHYS_OFFSET + 0x100, .map_io = qsd8x50_map_io, .init_irq = qsd8x50_init_irq, .init_machine = qsd8x50_init, .timer = &msm_timer, MACHINE_END