/* * Copyright (C) 2014 STMicroelectronics (R&D) Limited. * Author: Giuseppe Cavallaro * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include / { soc { sbc_serial0: serial@9530000 { status = "okay"; }; leds { compatible = "gpio-leds"; red { label = "Front Panel LED"; gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; green { gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; }; pwm0: pwm@9810000 { status = "okay"; }; pwm1: pwm@9510000 { status = "okay"; }; ssc2: i2c@9842000 { status = "okay"; clock-frequency = <100000>; st,i2c-min-scl-pulse-width-us = <0>; st,i2c-min-sda-pulse-width-us = <5>; }; ssc3: i2c@9843000 { status = "okay"; clock-frequency = <100000>; st,i2c-min-scl-pulse-width-us = <0>; st,i2c-min-sda-pulse-width-us = <5>; }; i2c@9844000 { status = "okay"; }; i2c@9845000 { status = "okay"; }; i2c@9540000 { status = "okay"; }; mmc0: sdhci@9060000 { non-removable; status = "okay"; }; mmc1: sdhci@9080000 { status = "okay"; }; /* SSC11 to HDMI */ hdmiddc: i2c@9541000 { status = "okay"; /* HDMI V1.3a supports Standard mode only */ clock-frequency = <100000>; st,i2c-min-scl-pulse-width-us = <0>; st,i2c-min-sda-pulse-width-us = <5>; }; miphy28lp_phy: miphy28lp { phy_port0: port@9b22000 { st,osc-rdy; }; phy_port1: port@9b2a000 { st,osc-force-ext; }; }; st_dwc3: dwc3@8f94000 { status = "okay"; }; ethernet0: dwmac@9630000 { st,tx-retime-src = "clkgen"; status = "okay"; phy-mode = "rgmii"; fixed-link = <0 1 1000 0 0>; }; demux@8a20000 { compatible = "st,stih407-c8sectpfe"; status = "okay"; reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>; reg-names = "c8sectpfe", "c8sectpfe-ram"; interrupts = , ; interrupt-names = "c8sectpfe-error-irq", "c8sectpfe-idle-irq"; pinctrl-0 = <&pinctrl_tsin0_serial>; pinctrl-1 = <&pinctrl_tsin0_parallel>; pinctrl-2 = <&pinctrl_tsin3_serial>; pinctrl-3 = <&pinctrl_tsin4_serial_alt3>; pinctrl-4 = <&pinctrl_tsin5_serial_alt1>; pinctrl-names = "tsin0-serial", "tsin0-parallel", "tsin3-serial", "tsin4-serial", "tsin5-serial"; clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>; clock-names = "c8sectpfe"; /* tsin0 is TSA on NIMA */ tsin0: port { tsin-num = <0>; serial-not-parallel; i2c-bus = <&ssc2>; reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>; dvb-card = ; }; }; sti_uni_player0: sti-uni-player@8d80000 { status = "okay"; }; sti_uni_player2: sti-uni-player@8d82000 { status = "okay"; }; sti_uni_player3: sti-uni-player@8d85000 { status = "okay"; }; sti_sasg_codec: sti-sasg-codec { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spdif_out>; }; sound { compatible = "simple-audio-card"; simple-audio-card,name = "STI-B2120"; status = "okay"; simple-audio-card,dai-link@0 { /* HDMI */ format = "i2s"; mclk-fs = <128>; cpu { sound-dai = <&sti_uni_player0>; }; codec { sound-dai = <&sti_hdmi>; }; }; simple-audio-card,dai-link@1 { /* DAC */ format = "i2s"; mclk-fs = <256>; frame-inversion = <1>; cpu { sound-dai = <&sti_uni_player2>; }; codec { sound-dai = <&sti_sasg_codec 1>; }; }; simple-audio-card,dai-link@2 { /* SPDIF */ format = "left_j"; mclk-fs = <128>; cpu { sound-dai = <&sti_uni_player3>; }; codec { sound-dai = <&sti_sasg_codec 0>; }; }; }; }; };