/* * Copyright 2014 Carlo Caione <carlo@caione.org> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This library is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public * License along with this library; if not, write to the Free * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, * MA 02110-1301 USA * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use, * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> /include/ "skeleton.dtsi" / { interrupt-parent = <&gic>; L2: l2-cache-controller@c4200000 { compatible = "arm,pl310-cache"; reg = <0xc4200000 0x1000>; cache-unified; cache-level = <2>; }; gic: interrupt-controller@c4301000 { compatible = "arm,cortex-a9-gic"; reg = <0xc4301000 0x1000>, <0xc4300100 0x0100>; interrupt-controller; #interrupt-cells = <3>; }; soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; cbus: cbus@c1100000 { compatible = "simple-bus"; reg = <0xc1100000 0x200000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xc1100000 0x200000>; assist: assist@7c00 { compatible = "amlogic,meson-mx-assist", "syscon"; reg = <0x7c00 0x200>; }; hwrng: rng@8100 { compatible = "amlogic,meson-rng"; reg = <0x8100 0x8>; }; uart_A: serial@84c0 { compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; reg = <0x84c0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_B: serial@84dc { compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; reg = <0x84dc 0x18>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; i2c_A: i2c@8500 { compatible = "amlogic,meson6-i2c"; reg = <0x8500 0x20>; interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; pwm_ab: pwm@8550 { compatible = "amlogic,meson-pwm"; reg = <0x8550 0x10>; #pwm-cells = <3>; status = "disabled"; }; pwm_cd: pwm@8650 { compatible = "amlogic,meson-pwm"; reg = <0x8650 0x10>; #pwm-cells = <3>; status = "disabled"; }; saradc: adc@8680 { compatible = "amlogic,meson-saradc"; reg = <0x8680 0x34>; #io-channel-cells = <1>; interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_C: serial@8700 { compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; reg = <0x8700 0x18>; interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; i2c_B: i2c@87c0 { compatible = "amlogic,meson6-i2c"; reg = <0x87c0 0x20>; interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; usb0_phy: phy@8800 { compatible = "amlogic,meson-mx-usb2-phy"; #phy-cells = <0>; reg = <0x8800 0x20>; status = "disabled"; }; usb1_phy: phy@8820 { compatible = "amlogic,meson-mx-usb2-phy"; #phy-cells = <0>; reg = <0x8820 0x20>; status = "disabled"; }; sdio: mmc@8c20 { compatible = "amlogic,meson-mx-sdio"; reg = <0x8c20 0x20>; interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; spifc: spi@8c80 { compatible = "amlogic,meson6-spifc"; reg = <0x8c80 0x80>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; gpio_intc: interrupt-controller@9880 { compatible = "amlogic,meson-gpio-intc"; reg = <0x9880 0x10>; interrupt-controller; #interrupt-cells = <2>; amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; status = "disabled"; }; wdt: watchdog@9900 { compatible = "amlogic,meson6-wdt"; reg = <0x9900 0x8>; interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; }; timer@9940 { compatible = "amlogic,meson6-timer"; reg = <0x9940 0x18>; interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>; }; }; aobus: aobus@c8100000 { compatible = "simple-bus"; reg = <0xc8100000 0x100000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xc8100000 0x100000>; ir_receiver: ir-receiver@480 { compatible= "amlogic,meson6-ir"; reg = <0x480 0x20>; interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_AO: serial@4c0 { compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; reg = <0x4c0 0x18>; interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; i2c_AO: i2c@500 { compatible = "amlogic,meson6-i2c"; reg = <0x500 0x20>; interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; }; usb0: usb@c9040000 { compatible = "snps,dwc2"; #address-cells = <1>; #size-cells = <0>; reg = <0xc9040000 0x40000>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb0_phy>; phy-names = "usb2-phy"; dr_mode = "host"; status = "disabled"; }; usb1: usb@c90c0000 { compatible = "snps,dwc2"; #address-cells = <1>; #size-cells = <0>; reg = <0xc90c0000 0x40000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb1_phy>; phy-names = "usb2-phy"; dr_mode = "host"; status = "disabled"; }; ethmac: ethernet@c9410000 { compatible = "amlogic,meson6-dwmac", "snps,dwmac"; reg = <0xc9410000 0x10000 0xc1108108 0x4>; interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>; interrupt-names = "macirq"; status = "disabled"; }; ahb_sram: sram@d9000000 { compatible = "mmio-sram"; reg = <0xd9000000 0x20000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0xd9000000 0x20000>; }; bootrom: bootrom@d9040000 { compatible = "amlogic,meson-mx-bootrom", "syscon"; reg = <0xd9040000 0x10000>; }; secbus: secbus@da000000 { compatible = "simple-bus"; reg = <0xda000000 0x6000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0xda000000 0x6000>; efuse: nvmem@0 { compatible = "amlogic,meson6-efuse"; reg = <0x0 0x2000>; #address-cells = <1>; #size-cells = <1>; }; }; }; }; /* end of / */