// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2014 Claudio Leite <leitec@staticky.com> * */ /dts-v1/; #include "kirkwood.dtsi" #include "kirkwood-6281.dtsi" / { model = "D-Link DIR-665"; compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood"; memory { device_type = "memory"; reg = <0x00000000 0x8000000>; /* 128 MB */ }; chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; stdout-path = &uart0; }; ocp@f1000000 { pinctrl: pin-controller@10000 { pinctrl-0 =< &pmx_led_usb &pmx_led_internet_blue &pmx_led_internet_amber &pmx_led_5g &pmx_led_status_blue &pmx_led_wps &pmx_led_status_amber &pmx_led_24g &pmx_btn_restart &pmx_btn_wps>; pinctrl-names = "default"; pmx_led_usb: pmx-led-usb { marvell,pins = "mpp12"; marvell,function = "gpio"; }; pmx_led_internet_blue: pmx-led-internet-blue { marvell,pins = "mpp42"; marvell,function = "gpio"; }; pmx_led_internet_amber: pmx-led-internet-amber { marvell,pins = "mpp43"; marvell,function = "gpio"; }; pmx_led_5g: pmx-led-5g { marvell,pins = "mpp44"; marvell,function = "gpio"; }; pmx_led_status_blue: pmx-led-status-blue { marvell,pins = "mpp45"; marvell,function = "gpio"; }; pmx_led_wps: pmx-led-wps { marvell,pins = "mpp47"; marvell,function = "gpio"; }; pmx_led_status_amber: pmx-led-status-amber { marvell,pins = "mpp48"; marvell,function = "gpio"; }; pmx_led_24g: pmx-led-24g { marvell,pins = "mpp49"; marvell,function = "gpio"; }; pmx_btn_restart: pmx-btn-restart { marvell,pins = "mpp28"; marvell,function = "gpio"; }; pmx_btn_wps: pmx-btn-wps { marvell,pins = "mpp46"; marvell,function = "gpio"; }; }; spi@10600 { status = "okay"; m25p80@0 { #address-cells = <1>; #size-cells = <1>; compatible = "mxicy,mx25l12805d", "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; partition@0 { label = "uboot"; reg = <0x0 0x30000>; read-only; }; partition@30000 { label = "nvram"; reg = <0x30000 0x10000>; read-only; }; partition@40000 { label = "kernel"; reg = <0x40000 0x180000>; }; partition@1c0000 { label = "rootfs"; reg = <0x1c0000 0xe00000>; }; cal_data: partition@fc0000 { label = "cal_data"; reg = <0xfc0000 0x10000>; read-only; }; partition@fd0000 { label = "lang_pack"; reg = <0xfd0000 0x30000>; read-only; }; }; }; serial@12000 { status = "okay"; }; i2c@11000 { status = "okay"; }; ehci@50000 { status = "okay"; }; }; gpio-leds { compatible = "gpio-leds"; blue-usb { label = "dir665:blue:usb"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; blue-internet { /* Can only be turned on if the Internet * Ethernet port has Link */ label = "dir665:blue:internet"; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; amber-internet { label = "dir665:amber:internet"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; blue-wifi5g { label = "dir665:blue:5g"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; }; blue-status { label = "dir665:blue:status"; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; blue-wps { label = "dir665:blue:wps"; gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; amber-status { label = "dir665:amber:status"; gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; blue-24g { label = "dir665:blue:24g"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; }; gpio-keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; wps { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; }; &mdio { status = "okay"; switch@0 { compatible = "marvell,mv88e6085"; #address-cells = <1>; #size-cells = <0>; reg = <0>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; label = "lan4"; }; port@1 { reg = <1>; label = "lan3"; }; port@2 { reg = <2>; label = "lan2"; }; port@3 { reg = <3>; label = "lan1"; }; port@4 { reg = <4>; label = "wan"; }; port@6 { reg = <6>; label = "cpu"; ethernet = <ð0port>; fixed-link { speed = <1000>; full-duplex; }; }; }; }; }; /* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set * fixed speed and duplex. */ ð0 { status = "okay"; ethernet0-port@0 { speed = <1000>; duplex = <1>; }; }; /* eth1 is connected to the switch as well. However DSA only supports a * single CPU port. So leave this port disabled to avoid confusion. */ ð1 { status = "disabled"; }; /* There is no battery on the boards, so the RTC does not keep time * when there is no power, making it useless. */ &rtc { status = "disabled"; }; &pciec { status = "okay"; }; &pcie0 { status = "okay"; };