/* * Copyright 2013 Crystalfontz America, Inc. * Copyright 2013 Free Electrons * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ /* * The CFA-10058 is an expansion board for the CFA-10036 module, thus we * need to include the CFA-10036 DTS. */ #include "imx28-cfa10036.dts" / { model = "Crystalfontz CFA-10058 Board"; compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28"; apb@80000000 { apbh@80000000 { pinctrl@80018000 { usb_pins_cfa10058: usb-10058@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_GPMI_D07__GPIO_0_7 >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; lcdif_pins_cfa10058: lcdif-10058@0 { reg = <0>; fsl,pinmux-ids = < MX28_PAD_LCD_RD_E__LCD_VSYNC MX28_PAD_LCD_WR_RWN__LCD_HSYNC MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_CS__LCD_ENABLE >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_DISABLE>; }; }; lcdif@80030000 { pinctrl-names = "default"; pinctrl-0 = <&lcdif_24bit_pins_a &lcdif_pins_cfa10058>; display = <&display>; status = "okay"; display: display { bits-per-pixel = <32>; bus-width = <24>; display-timings { native-mode = <&timing0>; timing0: timing0 { clock-frequency = <30000000>; hactive = <800>; vactive = <480>; hback-porch = <40>; hfront-porch = <40>; vback-porch = <13>; vfront-porch = <29>; hsync-len = <8>; vsync-len = <8>; hsync-active = <0>; vsync-active = <0>; de-active = <1>; pixelclk-active = <1>; }; }; }; }; }; apbx@80040000 { lradc@80050000 { fsl,lradc-touchscreen-wires = <4>; status = "okay"; }; pwm: pwm@80064000 { pinctrl-names = "default"; pinctrl-0 = <&pwm3_pins_b>; status = "okay"; }; usbphy1: usbphy@8007e000 { status = "okay"; }; }; }; ahb@80080000 { usb1: usb@80090000 { vbus-supply = <®_usb1_vbus>; pinctrl-0 = <&usb1_pins_a>; pinctrl-names = "default"; status = "okay"; }; }; regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; reg_usb1_vbus: regulator@0 { pinctrl-names = "default"; pinctrl-0 = <&usb_pins_cfa10058>; compatible = "regulator-fixed"; reg = <0>; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio0 7 1>; }; }; ahb@80080000 { mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; phy-reset-gpios = <&gpio2 21 0>; phy-reset-duration = <100>; status = "okay"; }; }; backlight { compatible = "pwm-backlight"; pwms = <&pwm 3 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; }; };