/* * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ /dts-v1/; #include "dra72x.dtsi" #include #include / { model = "TI DRA722"; compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7"; memory { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1024 MB */ }; aliases { display0 = &hdmi0; }; evm_3v3: fixedregulator-evm_3v3 { compatible = "regulator-fixed"; regulator-name = "evm_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; aic_dvdd: fixedregulator-aic_dvdd { /* TPS77018DBVT */ compatible = "regulator-fixed"; regulator-name = "aic_dvdd"; vin-supply = <&evm_3v3>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; evm_3v3_sd: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "evm_3v3_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; }; extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; }; extcon_usb2: extcon_usb2 { compatible = "linux,extcon-usb-gpio"; id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; }; hdmi0: connector { compatible = "hdmi-connector"; label = "hdmi"; type = "a"; port { hdmi_connector_in: endpoint { remote-endpoint = <&tpd12s015_out>; }; }; }; tpd12s015: encoder { compatible = "ti,tpd12s015"; pinctrl-names = "default"; pinctrl-0 = <&tpd12s015_pins>; gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */ <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; tpd12s015_in: endpoint { remote-endpoint = <&hdmi_out>; }; }; port@1 { reg = <1>; tpd12s015_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; }; }; }; sound0: sound@0 { compatible = "simple-audio-card"; simple-audio-card,name = "DRA7xx-EVM"; simple-audio-card,widgets = "Headphone", "Headphone Jack", "Line", "Line Out", "Microphone", "Mic Jack", "Line", "Line In"; simple-audio-card,routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT", "Line Out", "LLOUT", "Line Out", "RLOUT", "MIC3L", "Mic Jack", "MIC3R", "Mic Jack", "Mic Jack", "Mic Bias", "LINE1L", "Line In", "LINE1R", "Line In"; simple-audio-card,format = "dsp_b"; simple-audio-card,bitclock-master = <&sound0_master>; simple-audio-card,frame-master = <&sound0_master>; simple-audio-card,bitclock-inversion; sound0_master: simple-audio-card,cpu { sound-dai = <&mcasp3>; system-clock-frequency = <5644800>; }; simple-audio-card,codec { sound-dai = <&tlv320aic3106>; clocks = <&atl_clkin2_ck>; }; }; }; &dra7_pmx_core { i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ >; }; i2c5_pins: pinmux_i2c5_pins { pinctrl-single,pins = < 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ >; }; i2c5_pins: pinmux_i2c5_pins { pinctrl-single,pins = < 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ >; }; nand_default: nand_default { pinctrl-single,pins = < 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ 0xb4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */ 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */ 0xd8 (PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */ >; }; usb1_pins: pinmux_usb1_pins { pinctrl-single,pins = < 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ >; }; usb2_pins: pinmux_usb2_pins { pinctrl-single,pins = < 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ >; }; tps65917_pins_default: tps65917_pins_default { pinctrl-single,pins = < 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ >; }; mmc1_pins_default: mmc1_pins_default { pinctrl-single,pins = < 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ >; }; mmc2_pins_default: mmc2_pins_default { pinctrl-single,pins = < 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ >; }; dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < 0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */ 0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */ >; }; dcan1_pins_sleep: dcan1_pins_sleep { pinctrl-single,pins = < 0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */ 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; qspi1_pins: pinmux_qspi1_pins { pinctrl-single,pins = < 0x74 (PIN_OUTPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ 0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */ 0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */ 0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */ 0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */ 0x88 (PIN_OUTPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ 0xb8 (PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ >; }; hdmi_pins: pinmux_hdmi_pins { pinctrl-single,pins = < 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ >; }; tpd12s015_pins: pinmux_tpd12s015_pins { pinctrl-single,pins = < 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ >; }; atl_pins: pinmux_atl_pins { pinctrl-single,pins = < 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ >; }; mcasp3_pins: pinmux_mcasp3_pins { pinctrl-single,pins = < 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ >; }; mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { pinctrl-single,pins = < 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE15) 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE15) 0x32c (PIN_INPUT_PULLDOWN | MUX_MODE15) 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE15) >; }; }; &i2c1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; tps65917: tps65917@58 { compatible = "ti,tps65917"; reg = <0x58>; pinctrl-names = "default"; pinctrl-0 = <&tps65917_pins_default>; interrupts = ; /* IRQ_SYS_1N */ interrupt-controller; #interrupt-cells = <2>; ti,system-power-controller; tps65917_pmic { compatible = "ti,tps65917-pmic"; regulators { smps1_reg: smps1 { /* VDD_MPU */ regulator-name = "smps1"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; regulator-always-on; regulator-boot-on; }; smps2_reg: smps2 { /* VDD_CORE */ regulator-name = "smps2"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1060000>; regulator-boot-on; regulator-always-on; }; smps3_reg: smps3 { /* VDD_GPU IVA DSPEVE */ regulator-name = "smps3"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1250000>; regulator-boot-on; regulator-always-on; }; smps4_reg: smps4 { /* VDDS1V8 */ regulator-name = "smps4"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; smps5_reg: smps5 { /* VDD_DDR */ regulator-name = "smps5"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-boot-on; regulator-always-on; }; ldo1_reg: ldo1 { /* LDO1_OUT --> SDIO */ regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-always-on; regulator-boot-on; }; ldo2_reg: ldo2 { /* LDO2_OUT --> TP1017 (UNUSED) */ regulator-name = "ldo2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; ldo3_reg: ldo3 { /* VDDA_1V8_PHY */ regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; ldo5_reg: ldo5 { /* VDDA_1V8_PLL */ regulator-name = "ldo5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; }; ldo4_reg: ldo4 { /* VDDA_3V_USB: VDDA_USBHS33 */ regulator-name = "ldo4"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; }; }; }; tps65917_power_button { compatible = "ti,palmas-pwrbutton"; interrupt-parent = <&tps65917>; interrupts = <1 IRQ_TYPE_NONE>; wakeup-source; ti,palmas-long-press-seconds = <6>; }; }; pcf_gpio_21: gpio@21 { compatible = "ti,pcf8575"; reg = <0x21>; lines-initial-states = <0x1408>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&gpio6>; interrupts = <11 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; cpsw_sel_s0 { gpio-hog; gpios = <4 GPIO_ACTIVE_HIGH>; output-low; }; }; tlv320aic3106: tlv320aic3106@19 { #sound-dai-cells = <0>; compatible = "ti,tlv320aic3106"; reg = <0x19>; adc-settle-ms = <40>; ai3x-micbias-vg = <1>; /* 2.0V */ status = "okay"; /* Regulators */ AVDD-supply = <&evm_3v3>; IOVDD-supply = <&evm_3v3>; DRVDD-supply = <&evm_3v3>; DVDD-supply = <&aic_dvdd>; }; }; &i2c5 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c5_pins>; clock-frequency = <400000>; pcf_hdmi: pcf8575@26 { compatible = "nxp,pcf8575"; reg = <0x26>; gpio-controller; #gpio-cells = <2>; /* * initial state is used here to keep the mdio interface * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and * VIN2_S0 driven high otherwise Ethernet stops working * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6 */ lines-initial-states = <0x0f2b>; p1 { /* vin6_sel_s0: high: VIN6, low: audio */ gpio-hog; gpios = <1 GPIO_ACTIVE_HIGH>; output-low; line-name = "vin6_sel_s0"; }; }; }; &uart1 { status = "okay"; }; &elm { status = "okay"; }; &gpmc { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&nand_default>; ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { /* To use NAND, DIP switch SW5 must be set like so: * SW5.1 (NAND_SELn) = ON (LOW) * SW5.9 (GPMC_WPN) = OFF (HIGH) */ reg = <0 0 4>; /* device IO registers */ ti,nand-ecc-opt = "bch8"; ti,elm-id = <&elm>; nand-bus-width = <16>; gpmc,device-width = <2>; gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <80>; gpmc,cs-wr-off-ns = <80>; gpmc,adv-on-ns = <0>; gpmc,adv-rd-off-ns = <60>; gpmc,adv-wr-off-ns = <60>; gpmc,we-on-ns = <10>; gpmc,we-off-ns = <50>; gpmc,oe-on-ns = <4>; gpmc,oe-off-ns = <40>; gpmc,access-ns = <40>; gpmc,wr-access-ns = <80>; gpmc,rd-cycle-ns = <80>; gpmc,wr-cycle-ns = <80>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,clk-activation-ns = <0>; gpmc,wait-monitoring-ns = <0>; gpmc,wr-data-mux-bus-ns = <0>; /* MTD partition table */ /* All SPL-* partitions are sized to minimal length * which can be independently programmable. For * NAND flash this is equal to size of erase-block */ #address-cells = <1>; #size-cells = <1>; partition@0 { label = "NAND.SPL"; reg = <0x00000000 0x000020000>; }; partition@1 { label = "NAND.SPL.backup1"; reg = <0x00020000 0x00020000>; }; partition@2 { label = "NAND.SPL.backup2"; reg = <0x00040000 0x00020000>; }; partition@3 { label = "NAND.SPL.backup3"; reg = <0x00060000 0x00020000>; }; partition@4 { label = "NAND.u-boot-spl-os"; reg = <0x00080000 0x00040000>; }; partition@5 { label = "NAND.u-boot"; reg = <0x000c0000 0x00100000>; }; partition@6 { label = "NAND.u-boot-env"; reg = <0x001c0000 0x00020000>; }; partition@7 { label = "NAND.u-boot-env.backup1"; reg = <0x001e0000 0x00020000>; }; partition@8 { label = "NAND.kernel"; reg = <0x00200000 0x00800000>; }; partition@9 { label = "NAND.file-system"; reg = <0x00a00000 0x0f600000>; }; }; }; &usb2_phy1 { phy-supply = <&ldo4_reg>; }; &usb2_phy2 { phy-supply = <&ldo4_reg>; }; &omap_dwc3_1 { extcon = <&extcon_usb1>; }; &omap_dwc3_2 { extcon = <&extcon_usb2>; }; &usb1 { dr_mode = "peripheral"; pinctrl-names = "default"; pinctrl-0 = <&usb1_pins>; }; &usb2 { dr_mode = "host"; pinctrl-names = "default"; pinctrl-0 = <&usb2_pins>; }; &mmc1 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_default>; vmmc-supply = <&evm_3v3_sd>; vmmc_aux-supply = <&ldo1_reg>; bus-width = <4>; /* * SDCD signal is not being used here - using the fact that GPIO mode * is a viable alternative */ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; max-frequency = <192000000>; }; &mmc2 { /* SW5-3 in ON position */ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_default>; vmmc-supply = <&evm_3v3>; bus-width = <8>; ti,non-removable; max-frequency = <192000000>; }; &dra7_pmx_core { cpsw_default: cpsw_default { pinctrl-single,pins = < /* Slave 2 */ 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ >; }; cpsw_sleep: cpsw_sleep { pinctrl-single,pins = < /* Slave 2 */ 0x198 (MUX_MODE15) 0x19c (MUX_MODE15) 0x1a0 (MUX_MODE15) 0x1a4 (MUX_MODE15) 0x1a8 (MUX_MODE15) 0x1ac (MUX_MODE15) 0x1b0 (MUX_MODE15) 0x1b4 (MUX_MODE15) 0x1b8 (MUX_MODE15) 0x1bc (MUX_MODE15) 0x1c0 (MUX_MODE15) 0x1c4 (MUX_MODE15) >; }; davinci_mdio_default: davinci_mdio_default { pinctrl-single,pins = < /* MDIO */ 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ >; }; davinci_mdio_sleep: davinci_mdio_sleep { pinctrl-single,pins = < 0x23c (MUX_MODE15) 0x240 (MUX_MODE15) >; }; }; &mac { status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; slaves = <1>; }; &cpsw_emac0 { phy_id = <&davinci_mdio>, <3>; phy-mode = "rgmii"; }; &davinci_mdio { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; }; &dcan1 { status = "ok"; pinctrl-names = "default", "sleep", "active"; pinctrl-0 = <&dcan1_pins_sleep>; pinctrl-1 = <&dcan1_pins_sleep>; pinctrl-2 = <&dcan1_pins_default>; }; &qspi { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&qspi1_pins>; spi-max-frequency = <48000000>; m25p80@0 { compatible = "s25fl256s1"; spi-max-frequency = <48000000>; reg = <0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <4>; spi-cpol; spi-cpha; #address-cells = <1>; #size-cells = <1>; /* MTD partition table. * The ROM checks the first four physical blocks * for a valid file to boot and the flash here is * 64KiB block size. */ partition@0 { label = "QSPI.SPL"; reg = <0x00000000 0x000010000>; }; partition@1 { label = "QSPI.SPL.backup1"; reg = <0x00010000 0x00010000>; }; partition@2 { label = "QSPI.SPL.backup2"; reg = <0x00020000 0x00010000>; }; partition@3 { label = "QSPI.SPL.backup3"; reg = <0x00030000 0x00010000>; }; partition@4 { label = "QSPI.u-boot"; reg = <0x00040000 0x00100000>; }; partition@5 { label = "QSPI.u-boot-spl-os"; reg = <0x00140000 0x00080000>; }; partition@6 { label = "QSPI.u-boot-env"; reg = <0x001c0000 0x00010000>; }; partition@7 { label = "QSPI.u-boot-env.backup1"; reg = <0x001d0000 0x0010000>; }; partition@8 { label = "QSPI.kernel"; reg = <0x001e0000 0x0800000>; }; partition@9 { label = "QSPI.file-system"; reg = <0x009e0000 0x01620000>; }; }; }; &dss { status = "ok"; vdda_video-supply = <&ldo5_reg>; }; &hdmi { status = "ok"; vdda-supply = <&ldo3_reg>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>; port { hdmi_out: endpoint { remote-endpoint = <&tpd12s015_in>; }; }; }; &atl { pinctrl-names = "default"; pinctrl-0 = <&atl_pins>; assigned-clocks = <&abe_dpll_sys_clk_mux>, <&atl_gfclk_mux>, <&dpll_abe_ck>, <&dpll_abe_m2x2_ck>, <&atl_clkin2_ck>; assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; status = "okay"; atl2 { bws = ; aws = ; }; }; &mcasp3 { #sound-dai-cells = <0>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&mcasp3_pins>; pinctrl-1 = <&mcasp3_sleep_pins>; assigned-clocks = <&mcasp3_ahclkx_mux>; assigned-clock-parents = <&atl_clkin2_ck>; status = "okay"; op-mode = <0>; /* MCASP_IIS_MODE */ tdm-slots = <2>; /* 4 serializer */ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ 1 2 0 0 >; }; &mailbox5 { status = "okay"; mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { status = "okay"; }; mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { status = "okay"; }; }; &mailbox6 { status = "okay"; mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { status = "okay"; }; };