// SPDX-License-Identifier: GPL-2.0-or-later
// Copyright 2020 IBM Corp.
/dts-v1/;

#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/leds/leds-pca955x.h>

/ {
	model = "Everest";
	compatible = "ibm,everest-bmc", "aspeed,ast2600";

	aliases {
		i2c100 = &cfam0_i2c0;
		i2c101 = &cfam0_i2c1;
		i2c110 = &cfam0_i2c10;
		i2c111 = &cfam0_i2c11;
		i2c112 = &cfam0_i2c12;
		i2c113 = &cfam0_i2c13;
		i2c114 = &cfam0_i2c14;
		i2c115 = &cfam0_i2c15;
		i2c202 = &cfam1_i2c2;
		i2c203 = &cfam1_i2c3;
		i2c210 = &cfam1_i2c10;
		i2c211 = &cfam1_i2c11;
		i2c214 = &cfam1_i2c14;
		i2c215 = &cfam1_i2c15;
		i2c216 = &cfam1_i2c16;
		i2c217 = &cfam1_i2c17;
		i2c300 = &cfam2_i2c0;
		i2c301 = &cfam2_i2c1;
		i2c310 = &cfam2_i2c10;
		i2c311 = &cfam2_i2c11;
		i2c312 = &cfam2_i2c12;
		i2c313 = &cfam2_i2c13;
		i2c314 = &cfam2_i2c14;
		i2c315 = &cfam2_i2c15;
		i2c402 = &cfam3_i2c2;
		i2c403 = &cfam3_i2c3;
		i2c410 = &cfam3_i2c10;
		i2c411 = &cfam3_i2c11;
		i2c414 = &cfam3_i2c14;
		i2c415 = &cfam3_i2c15;
		i2c416 = &cfam3_i2c16;
		i2c417 = &cfam3_i2c17;
		i2c500 = &cfam4_i2c0;
		i2c501 = &cfam4_i2c1;
		i2c510 = &cfam4_i2c10;
		i2c511 = &cfam4_i2c11;
		i2c512 = &cfam4_i2c12;
		i2c513 = &cfam4_i2c13;
		i2c514 = &cfam4_i2c14;
		i2c515 = &cfam4_i2c15;
		i2c602 = &cfam5_i2c2;
		i2c603 = &cfam5_i2c3;
		i2c610 = &cfam5_i2c10;
		i2c611 = &cfam5_i2c11;
		i2c614 = &cfam5_i2c14;
		i2c615 = &cfam5_i2c15;
		i2c616 = &cfam5_i2c16;
		i2c617 = &cfam5_i2c17;
		i2c700 = &cfam6_i2c0;
		i2c701 = &cfam6_i2c1;
		i2c710 = &cfam6_i2c10;
		i2c711 = &cfam6_i2c11;
		i2c712 = &cfam6_i2c12;
		i2c713 = &cfam6_i2c13;
		i2c714 = &cfam6_i2c14;
		i2c715 = &cfam6_i2c15;
		i2c802 = &cfam7_i2c2;
		i2c803 = &cfam7_i2c3;
		i2c810 = &cfam7_i2c10;
		i2c811 = &cfam7_i2c11;
		i2c814 = &cfam7_i2c14;
		i2c815 = &cfam7_i2c15;
		i2c816 = &cfam7_i2c16;
		i2c817 = &cfam7_i2c17;

		i2c16 = &i2c4mux0chn0;
		i2c17 = &i2c4mux0chn1;
		i2c18 = &i2c4mux0chn2;
		i2c19 = &i2c5mux0chn0;
		i2c20 = &i2c5mux0chn1;
		i2c21 = &i2c5mux0chn2;
		i2c22 = &i2c5mux0chn3;
		i2c23 = &i2c6mux0chn0;
		i2c24 = &i2c6mux0chn1;
		i2c25 = &i2c6mux0chn2;
		i2c26 = &i2c6mux0chn3;
		i2c27 = &i2c14mux0chn0;
		i2c28 = &i2c14mux0chn1;
		i2c29 = &i2c14mux0chn2;
		i2c30 = &i2c14mux0chn3;
		i2c31 = &i2c14mux1chn0;
		i2c32 = &i2c14mux1chn1;
		i2c33 = &i2c14mux1chn2;
		i2c34 = &i2c14mux1chn3;

		serial4 = &uart5;

		spi10 = &cfam0_spi0;
		spi11 = &cfam0_spi1;
		spi12 = &cfam0_spi2;
		spi13 = &cfam0_spi3;
		spi20 = &cfam1_spi0;
		spi21 = &cfam1_spi1;
		spi22 = &cfam1_spi2;
		spi23 = &cfam1_spi3;
		spi30 = &cfam2_spi0;
		spi31 = &cfam2_spi1;
		spi32 = &cfam2_spi2;
		spi33 = &cfam2_spi3;
		spi40 = &cfam3_spi0;
		spi41 = &cfam3_spi1;
		spi42 = &cfam3_spi2;
		spi43 = &cfam3_spi3;
		spi50 = &cfam4_spi0;
		spi51 = &cfam4_spi1;
		spi52 = &cfam4_spi2;
		spi53 = &cfam4_spi3;
		spi60 = &cfam5_spi0;
		spi61 = &cfam5_spi1;
		spi62 = &cfam5_spi2;
		spi63 = &cfam5_spi3;
		spi70 = &cfam6_spi0;
		spi71 = &cfam6_spi1;
		spi72 = &cfam6_spi2;
		spi73 = &cfam6_spi3;
		spi80 = &cfam7_spi0;
		spi81 = &cfam7_spi1;
		spi82 = &cfam7_spi2;
		spi83 = &cfam7_spi3;
	};

	chosen {
		stdout-path = &uart5;
		bootargs = "console=ttyS4,115200n8";
	};

	memory@80000000 {
		device_type = "memory";
		reg = <0x80000000 0x40000000>;
	};

	reserved-memory {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		/* LPC FW cycle bridge region requires natural alignment */
		flash_memory: region@b8000000 {
			no-map;
			reg = <0xb8000000 0x04000000>; /* 64M */
		};

		/* 48MB region from the end of flash to start of vga memory */
		ramoops@bc000000 {
			compatible = "ramoops";
			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
			record-size = <0x8000>;
			console-size = <0x8000>;
			pmsg-size = <0x8000>;
			max-reason = <3>; /* KMSG_DUMP_EMERG */
		};

		/* VGA region is dictated by hardware strapping */
		vga_memory: region@bf000000 {
			no-map;
			compatible = "shared-dma-pool";
			reg = <0xbf000000 0x01000000>; /* 16M */
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <1000>;

		fan0-presence {
			label = "fan0-presence";
			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
			linux,code = <15>;
		};

		fan1-presence {
			label = "fan1-presence";
			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
			linux,code = <14>;
		};

		fan2-presence {
			label = "fan2-presence";
			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
			linux,code = <13>;
		};

		fan3-presence {
			label = "fan3-presence";
			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
			linux,code = <12>;
		};
	};
};

&gpio0 {
	gpio-line-names =
	/*A0-A7*/	"","","","","","","","",
	/*B0-B7*/	"USERSPACE_RSTIND_BUFF","","","","","","","",
	/*C0-C7*/	"","","","","","","","",
	/*D0-D7*/	"","","","","","","","",
	/*E0-E7*/	"","","","","","","","",
	/*F0-F7*/	"PIN_HOLE_RESET_IN_N","","",
				"PIN_HOLE_RESET_OUT_N","","","","",
	/*G0-G7*/	"","","","","","","","",
	/*H0-H7*/	"","","","","","","","",
	/*I0-I7*/	"","","","","","","","",
	/*J0-J7*/	"","","","","","","","",
	/*K0-K7*/	"","","","","","","","",
	/*L0-L7*/	"","","","","","","","",
	/*M0-M7*/	"","","","","","","","",
	/*N0-N7*/	"","","","","","","","",
	/*O0-O7*/	"","","","","","","","",
	/*P0-P7*/	"","","","","","","","",
	/*Q0-Q7*/	"","","","","","","","",
	/*R0-R7*/	"","","","","","I2C_FLASH_MICRO_N","","",
	/*S0-S7*/	"","","","","","","","",
	/*T0-T7*/	"","","","","","","","",
	/*U0-U7*/	"","","","","","","","",
	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
	/*W0-W7*/	"","","","","","","","",
	/*X0-X7*/	"","","","","","","","",
	/*Y0-Y7*/	"","","","","","","","",
	/*Z0-Z7*/   "","","","","","","","";
};

&i2c0 {
	status = "okay";

	eeprom@51 {
		compatible = "atmel,24c64";
		reg = <0x51>;
	};

	pca1: pca9552@62 {
		compatible = "nxp,pca9552";
		reg = <0x62>;
		#address-cells = <1>;
		#size-cells = <0>;

		gpio-controller;
		#gpio-cells = <2>;

		gpio-line-names =
			"presence-ps0",
			"presence-ps1",
			"presence-ps2",
			"presence-ps3",
			"presence-pdb",
			"presence-tpm",
			"", "",
			"presence-cp0",
			"presence-cp1",
			"presence-cp2",
			"presence-cp3",
			"presence-dasd",
			"presence-lcd-op",
			"presence-base-op",
			"";

		gpio@0 {
			reg = <0>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@01 {
			reg = <1>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@2 {
			reg = <2>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@3 {
			reg = <3>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@4 {
			reg = <4>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@5 {
			reg = <5>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@6 {
			reg = <6>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@7 {
			reg = <7>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@8 {
			reg = <8>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@9 {
			reg = <9>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@10 {
			reg = <10>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@11 {
			reg = <11>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@12 {
			reg = <12>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@13 {
			reg = <13>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@14 {
			reg = <14>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@15 {
			reg = <15>;
			type = <PCA955X_TYPE_GPIO>;
		};
	};
};

&i2c1 {
	status = "okay";

	pca2: pca9552@61 {
		compatible = "nxp,pca9552";
		reg = <0x61>;
		#address-cells = <1>;
		#size-cells = <0>;

		gpio-controller;
		#gpio-cells = <2>;

		gpio-line-names =
			"presence-cable-card1",
			"presence-cable-card2",
			"presence-cable-card3",
			"presence-cable-card4",
			"presence-cable-card5",
			"expander-cable-card1",
			"expander-cable-card2",
			"expander-cable-card3",
			"expander-cable-card4",
			"expander-cable-card5";

		gpio@0 {
			reg = <0>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@1 {
			reg = <1>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@2 {
			reg = <2>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@3 {
			reg = <3>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@4 {
			reg = <4>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@5 {
			reg = <5>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@6 {
			reg = <6>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@7 {
			reg = <7>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@8 {
			reg = <8>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@9 {
			reg = <9>;
			type = <PCA955X_TYPE_GPIO>;
		};

	};

	pca3: pca9552@62 {
		compatible = "nxp,pca9552";
		reg = <0x62>;
		#address-cells = <1>;
		#size-cells = <0>;

		gpio-controller;
		#gpio-cells = <2>;

		gpio-line-names =
			"presence-cable-card6",
			"presence-cable-card7",
			"presence-cable-card8",
			"presence-cable-card9",
			"presence-cable-card10",
			"presence-cable-card11",
			"expander-cable-card6",
			"expander-cable-card7",
			"expander-cable-card8",
			"expander-cable-card9",
			"expander-cable-card10",
			"expander-cable-card11";

		gpio@0 {
			reg = <0>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@1 {
			reg = <1>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@2 {
			reg = <2>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@3 {
			reg = <3>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@4 {
			reg = <4>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@5 {
			reg = <5>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@6 {
			reg = <6>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@7 {
			reg = <7>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@8 {
			reg = <8>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@9 {
			reg = <9>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@10 {
			reg = <10>;
			type = <PCA955X_TYPE_GPIO>;
		};

		gpio@11 {
			reg = <11>;
			type = <PCA955X_TYPE_GPIO>;
		};

	};

};

&i2c2 {
	status = "okay";
};

&i2c3 {
	status = "okay";

	eeprom@54 {
		compatible = "atmel,24c128";
		reg = <0x54>;
	};

	power-supply@68 {
		compatible = "ibm,cffps";
		reg = <0x68>;
	};

	power-supply@69 {
		compatible = "ibm,cffps";
		reg = <0x69>;
	};

	power-supply@6a {
		compatible = "ibm,cffps";
		reg = <0x6a>;
	};

	power-supply@6b {
		compatible = "ibm,cffps";
		reg = <0x6b>;
	};
};

&i2c4 {
	status = "okay";

	i2c-switch@70 {
		compatible = "nxp,pca9546";
		reg = <0x70>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "okay";
		i2c-mux-idle-disconnect;

		i2c4mux0chn0: i2c@0 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0>;
			eeprom@52 {
				compatible = "atmel,24c64";
				reg = <0x52>;
			};
		};

		i2c4mux0chn1: i2c@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <1>;
			eeprom@50 {
				compatible = "atmel,24c64";
				reg = <0x50>;
			};
		};

		i2c4mux0chn2: i2c@2 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <2>;
			eeprom@51 {
				compatible = "atmel,24c64";
				reg = <0x51>;
			};
		};
	};
};

&i2c5 {
	status = "okay";

	i2c-switch@70 {
		compatible = "nxp,pca9546";
		reg = <0x70>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "okay";
		i2c-mux-idle-disconnect;

		i2c5mux0chn0: i2c@0 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0>;
			eeprom@50 {
				compatible = "atmel,24c64";
				reg = <0x50>;
			};
		};

		i2c5mux0chn1: i2c@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <1>;
			eeprom@51 {
				compatible = "atmel,24c64";
				reg = <0x51>;
			};
		};

		i2c5mux0chn2: i2c@2 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <2>;
			eeprom@52 {
				compatible = "atmel,24c64";
				reg = <0x52>;
			};
		};

		i2c5mux0chn3: i2c@3 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <3>;
			eeprom@53 {
				compatible = "atmel,24c64";
				reg = <0x53>;
			};
		};
	};
};

&i2c6 {
	status = "okay";

	i2c-switch@70 {
		compatible = "nxp,pca9546";
		reg = <0x70>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "okay";
		i2c-mux-idle-disconnect;

		i2c6mux0chn0: i2c@0 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0>;
			eeprom@50 {
				compatible = "atmel,24c64";
				reg = <0x50>;
			};
		};

		i2c6mux0chn1: i2c@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <1>;
			eeprom@52 {
				compatible = "atmel,24c64";
				reg = <0x52>;
			};
		};

		i2c6mux0chn2: i2c@2 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <2>;
			eeprom@53 {
				compatible = "atmel,24c64";
				reg = <0x53>;
			};
		};

		i2c6mux0chn3: i2c@3 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <3>;
			eeprom@51 {
				compatible = "atmel,24c64";
				reg = <0x51>;
			};
		};
	};
};

&i2c7 {
	status = "okay";
};

&i2c8 {
	status = "okay";

	ucd90320@11 {
		compatible = "ti,ucd90320";
		reg = <0x11>;
	};

	rtc@32 {
		compatible = "epson,rx8900";
		reg = <0x32>;
	};

	eeprom@51 {
		compatible = "atmel,24c64";
		reg = <0x51>;
	};

	eeprom@50 {
		compatible = "atmel,24c128";
		reg = <0x50>;
	};
};

&i2c9 {
	status = "okay";

	eeprom@50 {
		compatible = "atmel,24c128";
		reg = <0x50>;
	};

	eeprom@51 {
		compatible = "atmel,24c128";
		reg = <0x51>;
	};

	eeprom@53 {
		compatible = "atmel,24c128";
		reg = <0x53>;
	};

	eeprom@52 {
		compatible = "atmel,24c128";
		reg = <0x52>;
	};
};

&i2c10 {
	status = "okay";

	eeprom@51 {
		compatible = "atmel,24c128";
		reg = <0x51>;
	};

	eeprom@50 {
		compatible = "atmel,24c128";
		reg = <0x50>;
	};

	eeprom@53 {
		compatible = "atmel,24c128";
		reg = <0x53>;
	};

	eeprom@52 {
		compatible = "atmel,24c128";
		reg = <0x52>;
	};
};

&i2c11 {
	status = "okay";

	eeprom@51 {
		compatible = "atmel,24c128";
		reg = <0x51>;
	};

	eeprom@50 {
		compatible = "atmel,24c128";
		reg = <0x50>;
	};

	eeprom@53 {
		compatible = "atmel,24c128";
		reg = <0x53>;
	};

	eeprom@52 {
		compatible = "atmel,24c128";
		reg = <0x52>;
	};
};

&i2c12 {
	status = "okay";
};

&i2c13 {
	status = "okay";

	eeprom@51 {
		compatible = "atmel,24c128";
		reg = <0x51>;
	};

	eeprom@50 {
		compatible = "atmel,24c128";
		reg = <0x50>;
	};

	eeprom@53 {
		compatible = "atmel,24c128";
		reg = <0x53>;
	};

	eeprom@52 {
		compatible = "atmel,24c128";
		reg = <0x52>;
	};
};

&i2c14 {
	status = "okay";

	i2c-switch@70 {
		compatible = "nxp,pca9546";
		reg = <0x70>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "okay";
		i2c-mux-idle-disconnect;

		i2c14mux0chn0: i2c@0 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0>;
			eeprom@50 {
				compatible = "atmel,24c64";
				reg = <0x50>;
			};
		};

		i2c14mux0chn1: i2c@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <1>;
			eeprom@51 {
				compatible = "atmel,24c32";
				reg = <0x51>;
			};
		};

		i2c14mux0chn2: i2c@2 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <2>;
			eeprom@50 {
				compatible = "atmel,24c32";
				reg = <0x50>;
			};
		};

		i2c14mux0chn3: i2c@3 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <3>;

			max31785@52 {
				compatible = "maxim,max31785a";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x52>;

				fan@0 {
					compatible = "pmbus-fan";
					reg = <0>;
					tach-pulses = <2>;
				};

				fan@1 {
					compatible = "pmbus-fan";
					reg = <1>;
					tach-pulses = <2>;
				};

				fan@2 {
					compatible = "pmbus-fan";
					reg = <2>;
					tach-pulses = <2>;
				};

				fan@3 {
					compatible = "pmbus-fan";
					reg = <3>;
					tach-pulses = <2>;
				};
			};

			pca0: pca9552@61 {
				compatible = "nxp,pca9552";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x61>;

				gpio-controller;
				#gpio-cells = <2>;

				gpio-line-names =
					"","","","",
					"","","","",
					"","","","",
					"presence-fan3",
					"presence-fan2",
					"presence-fan1",
					"presence-fan0";

				gpio@0 {
					reg = <0>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@1 {
					reg = <1>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@2 {
					reg = <2>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@3 {
					reg = <3>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@4 {
					reg = <4>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@5 {
					reg = <5>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@6 {
					reg = <6>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@7 {
					reg = <7>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@8 {
					reg = <8>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@9 {
					reg = <9>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@10 {
					reg = <10>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@11 {
					reg = <11>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@12 {
					reg = <12>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@13 {
					reg = <13>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@14 {
					reg = <14>;
					type = <PCA955X_TYPE_GPIO>;
				};

				gpio@15 {
					reg = <15>;
					type = <PCA955X_TYPE_GPIO>;
				};
			};
		};
	};

	i2c-switch@71 {
		compatible = "nxp,pca9546";
		reg = <0x71>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "okay";
		i2c-mux-idle-disconnect;

		i2c14mux1chn0: i2c@0 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0>;
			eeprom@50 {
				compatible = "atmel,24c32";
				reg = <0x50>;
			};
		};

		i2c14mux1chn1: i2c@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <1>;
			eeprom@50 {
				compatible = "atmel,24c32";
				reg = <0x50>;
			};
		};

		i2c14mux1chn2: i2c@2 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <2>;
			eeprom@50 {
				compatible = "atmel,24c32";
				reg = <0x50>;
			};
		};

		i2c14mux1chn3: i2c@3 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <3>;
			eeprom@50 {
				compatible = "atmel,24c32";
				reg = <0x50>;
			};
		};
	};
};

&i2c15 {
	status = "okay";
};

&ehci1 {
	status = "okay";
};

&emmc_controller {
	status = "okay";
};

&pinctrl_emmc_default {
	bias-disable;
};

&emmc {
	status = "okay";
};

&fsim0 {
	status = "okay";

	#address-cells = <2>;
	#size-cells = <0>;

	/*
	 * CFAM Reset is supposed to be active low but pass1 hardware is wired
	 * active high.
	 */
	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;

	cfam@0,0 {	/* DCM0_C0 */
		reg = <0 0>;
		#address-cells = <1>;
		#size-cells = <1>;
		chip-id = <0>;

		scom@1000 {
			compatible = "ibm,fsi2pib";
			reg = <0x1000 0x400>;
		};

		i2c@1800 {
			compatible = "ibm,fsi-i2c-master";
			reg = <0x1800 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam0_i2c0: i2c-bus@0 {
				reg = <0>;	/* OMI01 */
			};

			cfam0_i2c1: i2c-bus@1 {
				reg = <1>;	/* OMI23 */
			};

			cfam0_i2c10: i2c-bus@a {
				reg = <10>;	/* OP3A */
			};

			cfam0_i2c11: i2c-bus@b {
				reg = <11>;	/* OP3B */
			};

			cfam0_i2c12: i2c-bus@c {
				reg = <12>;	/* OP4A */
			};

			cfam0_i2c13: i2c-bus@d {
				reg = <13>;	/* OP4B */
			};

			cfam0_i2c14: i2c-bus@e {
				reg = <14>;	/* OP5A */
			};

			cfam0_i2c15: i2c-bus@f {
				reg = <15>;	/* OP5B */
			};
		};

		fsi2spi@1c00 {
			compatible = "ibm,fsi2spi";
			reg = <0x1c00 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam0_spi0: spi@0 {
				reg = <0x0>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam0_spi1: spi@20 {
				reg = <0x20>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam0_spi2: spi@40 {
				reg = <0x40>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam0_spi3: spi@60 {
				reg = <0x60>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};
		};

		sbefifo@2400 {
			compatible = "ibm,p9-sbefifo";
			reg = <0x2400 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			fsi_occ0: occ {
				compatible = "ibm,p10-occ";
			};
		};

		fsi_hub0: hub@3400 {
			compatible = "fsi-master-hub";
			reg = <0x3400 0x400>;
			#address-cells = <2>;
			#size-cells = <0>;
		};
	};
};

&fsi_hub0 {
	cfam@1,0 { /* DCM0_C1 */
		reg = <1 0>;
		#address-cells = <1>;
		#size-cells = <1>;
		chip-id = <1>;

		scom@1000 {
			compatible = "ibm,fsi2pib";
			reg = <0x1000 0x400>;
		};

		i2c@1800 {
			compatible = "ibm,fsi-i2c-master";
			reg = <0x1800 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam1_i2c2: i2c-bus@2 {
				reg = <2>;	/* OMI45 */
			};

			cfam1_i2c3: i2c-bus@3 {
				reg = <3>;	/* OMI67 */
			};

			cfam1_i2c10: i2c-bus@a {
				reg = <10>;	/* OP3A */
			};

			cfam1_i2c11: i2c-bus@b {
				reg = <11>;	/* OP3B */
			};

			cfam1_i2c14: i2c-bus@e {
				reg = <14>;	/* OP5A */
			};

			cfam1_i2c15: i2c-bus@f {
				reg = <15>;	/* OP5B */
			};

			cfam1_i2c16: i2c-bus@10 {
				reg = <16>;	/* OP6A */
			};

			cfam1_i2c17: i2c-bus@11 {
				reg = <17>;	/* OP6B */
			};
		};

		fsi2spi@1c00 {
			compatible = "ibm,fsi2spi";
			reg = <0x1c00 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam1_spi0: spi@0 {
				reg = <0x0>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam1_spi1: spi@20 {
				reg = <0x20>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam1_spi2: spi@40 {
				reg = <0x40>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam1_spi3: spi@60 {
				reg = <0x60>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};
		};

		sbefifo@2400 {
			compatible = "ibm,p9-sbefifo";
			reg = <0x2400 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			fsi_occ1: occ {
				compatible = "ibm,p10-occ";
			};
		};

		fsi_hub1: hub@3400 {
			compatible = "fsi-master-hub";
			reg = <0x3400 0x400>;
			#address-cells = <2>;
			#size-cells = <0>;

			no-scan-on-init;
		};
	};

	cfam@2,0 { /* DCM1_C0 */
		reg = <2 0>;
		#address-cells = <1>;
		#size-cells = <1>;
		chip-id = <2>;

		scom@1000 {
			compatible = "ibm,fsi2pib";
			reg = <0x1000 0x400>;
		};

		i2c@1800 {
			compatible = "ibm,fsi-i2c-master";
			reg = <0x1800 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam2_i2c0: i2c-bus@0 {
				reg = <0>;	/* OM01 */
			};

			cfam2_i2c1: i2c-bus@1 {
				reg = <1>;	/* OM23 */
			};

			cfam2_i2c10: i2c-bus@a {
				reg = <10>;	/* OP3A */
			};

			cfam2_i2c11: i2c-bus@b {
				reg = <11>;	/* OP3B */
			};

			cfam2_i2c12: i2c-bus@c {
				reg = <12>;	/* OP4A */
			};

			cfam2_i2c13: i2c-bus@d {
				reg = <13>;	/* OP4B */
			};

			cfam2_i2c14: i2c-bus@e {
				reg = <14>;	/* OP5A */
			};

			cfam2_i2c15: i2c-bus@f {
				reg = <15>;	/* OP5B */
			};
		};

		fsi2spi@1c00 {
			compatible = "ibm,fsi2spi";
			reg = <0x1c00 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam2_spi0: spi@0 {
				reg = <0x0>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam2_spi1: spi@20 {
				reg = <0x20>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam2_spi2: spi@40 {
				reg = <0x40>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam2_spi3: spi@60 {
				reg = <0x60>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};
		};

		sbefifo@2400 {
			compatible = "ibm,p9-sbefifo";
			reg = <0x2400 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			fsi_occ2: occ {
				compatible = "ibm,p10-occ";
			};
		};

		fsi_hub2: hub@3400 {
			compatible = "fsi-master-hub";
			reg = <0x3400 0x400>;
			#address-cells = <2>;
			#size-cells = <0>;

			no-scan-on-init;
		};
	};

	cfam@3,0 { /* DCM1_C1 */
		reg = <3 0>;
		#address-cells = <1>;
		#size-cells = <1>;
		chip-id = <3>;

		scom@1000 {
			compatible = "ibm,fsi2pib";
			reg = <0x1000 0x400>;
		};

		i2c@1800 {
			compatible = "ibm,fsi-i2c-master";
			reg = <0x1800 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam3_i2c2: i2c-bus@2 {
				reg = <2>;	/* OM45 */
			};

			cfam3_i2c3: i2c-bus@3 {
				reg = <3>;	/* OM67 */
			};

			cfam3_i2c10: i2c-bus@a {
				reg = <10>;	/* OP3A */
			};

			cfam3_i2c11: i2c-bus@b {
				reg = <11>;	/* OP3B */
			};

			cfam3_i2c14: i2c-bus@e {
				reg = <14>;	/* OP5A */
			};

			cfam3_i2c15: i2c-bus@f {
				reg = <15>;	/* OP5B */
			};

			cfam3_i2c16: i2c-bus@10 {
				reg = <16>;	/* OP6A */
			};

			cfam3_i2c17: i2c-bus@11 {
				reg = <17>;	/* OP6B */
			};
		};

		fsi2spi@1c00 {
			compatible = "ibm,fsi2spi";
			reg = <0x1c00 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam3_spi0: spi@0 {
				reg = <0x0>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam3_spi1: spi@20 {
				reg = <0x20>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam3_spi2: spi@40 {
				reg = <0x40>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam3_spi3: spi@60 {
				reg = <0x60>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};
		};

		sbefifo@2400 {
			compatible = "ibm,p9-sbefifo";
			reg = <0x2400 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			fsi_occ3: occ {
				compatible = "ibm,p10-occ";
			};
		};

		fsi_hub3: hub@3400 {
			compatible = "fsi-master-hub";
			reg = <0x3400 0x400>;
			#address-cells = <2>;
			#size-cells = <0>;

			no-scan-on-init;
		};
	};

	cfam@4,0 { /* DCM2_C0 */
		reg = <4 0>;
		#address-cells = <1>;
		#size-cells = <1>;
		chip-id = <4>;

		scom@1000 {
			compatible = "ibm,fsi2pib";
			reg = <0x1000 0x400>;
		};

		i2c@1800 {
			compatible = "ibm,fsi-i2c-master";
			reg = <0x1800 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam4_i2c0: i2c-bus@0 {
				reg = <0>;	/* OM01 */
			};

			cfam4_i2c1: i2c-bus@1 {
				reg = <1>;	/* OM23 */
			};

			cfam4_i2c10: i2c-bus@a {
				reg = <10>;	/* OP3A */
			};

			cfam4_i2c11: i2c-bus@b {
				reg = <11>;	/* OP3B */
			};

			cfam4_i2c12: i2c-bus@c {
				reg = <12>;	/* OP4A */
			};

			cfam4_i2c13: i2c-bus@d {
				reg = <13>;	/* OP4B */
			};

			cfam4_i2c14: i2c-bus@e {
				reg = <14>;	/* OP5A */
			};

			cfam4_i2c15: i2c-bus@f {
				reg = <15>;	/* OP5B */
			};
		};

		fsi2spi@1c00 {
			compatible = "ibm,fsi2spi";
			reg = <0x1c00 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam4_spi0: spi@0 {
				reg = <0x0>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam4_spi1: spi@20 {
				reg = <0x20>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam4_spi2: spi@40 {
				reg = <0x40>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam4_spi3: spi@60 {
				reg = <0x60>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};
		};

		sbefifo@2400 {
			compatible = "ibm,p9-sbefifo";
			reg = <0x2400 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			fsi_occ4: occ {
				compatible = "ibm,p10-occ";
			};
		};

		fsi_hub4: hub@3400 {
			compatible = "fsi-master-hub";
			reg = <0x3400 0x400>;
			#address-cells = <2>;
			#size-cells = <0>;

			no-scan-on-init;
		};
	};

	cfam@5,0 { /* DCM2_C1 */
		reg = <5 0>;
		#address-cells = <1>;
		#size-cells = <1>;
		chip-id = <5>;

		scom@1000 {
			compatible = "ibm,fsi2pib";
			reg = <0x1000 0x400>;
		};

		i2c@1800 {
			compatible = "ibm,fsi-i2c-master";
			reg = <0x1800 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam5_i2c2: i2c-bus@2 {
				reg = <2>;	/* OM45 */
			};

			cfam5_i2c3: i2c-bus@3 {
				reg = <3>;	/* OM67 */
			};

			cfam5_i2c10: i2c-bus@a {
				reg = <10>;	/* OP3A */
			};

			cfam5_i2c11: i2c-bus@b {
				reg = <11>;	/* OP3B */
			};

			cfam5_i2c14: i2c-bus@e {
				reg = <14>;	/* OP5A */
			};

			cfam5_i2c15: i2c-bus@f {
				reg = <15>;	/* OP5B */
			};

			cfam5_i2c16: i2c-bus@10 {
				reg = <16>;	/* OP6A */
			};

			cfam5_i2c17: i2c-bus@11 {
				reg = <17>;	/* OP6B */
			};
		};

		fsi2spi@1c00 {
			compatible = "ibm,fsi2spi";
			reg = <0x1c00 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam5_spi0: spi@0 {
				reg = <0x0>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam5_spi1: spi@20 {
				reg = <0x20>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam5_spi2: spi@40 {
				reg = <0x40>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam5_spi3: spi@60 {
				reg = <0x60>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};
		};

		sbefifo@2400 {
			compatible = "ibm,p9-sbefifo";
			reg = <0x2400 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			fsi_occ5: occ {
				compatible = "ibm,p10-occ";
			};
		};

		fsi_hub5: hub@3400 {
			compatible = "fsi-master-hub";
			reg = <0x3400 0x400>;
			#address-cells = <2>;
			#size-cells = <0>;

			no-scan-on-init;
		};
	};

	cfam@6,0 { /* DCM3_C0 */
		reg = <6 0>;
		#address-cells = <1>;
		#size-cells = <1>;
		chip-id = <6>;

		scom@1000 {
			compatible = "ibm,fsi2pib";
			reg = <0x1000 0x400>;
		};

		i2c@1800 {
			compatible = "ibm,fsi-i2c-master";
			reg = <0x1800 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam6_i2c0: i2c-bus@0 {
				reg = <0>;	/* OM01 */
			};

			cfam6_i2c1: i2c-bus@1 {
				reg = <1>;	/* OM23 */
			};

			cfam6_i2c10: i2c-bus@a {
				reg = <10>;	/* OP3A */
			};

			cfam6_i2c11: i2c-bus@b {
				reg = <11>;	/* OP3B */
			};

			cfam6_i2c12: i2c-bus@c {
				reg = <12>;	/* OP4A */
			};

			cfam6_i2c13: i2c-bus@d {
				reg = <13>;	/* OP4B */
			};

			cfam6_i2c14: i2c-bus@e {
				reg = <14>;	/* OP5A */
			};

			cfam6_i2c15: i2c-bus@f {
				reg = <15>;	/* OP5B */
			};
		};

		fsi2spi@1c00 {
			compatible = "ibm,fsi2spi";
			reg = <0x1c00 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam6_spi0: spi@0 {
				reg = <0x0>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam6_spi1: spi@20 {
				reg = <0x20>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam6_spi2: spi@40 {
				reg = <0x40>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam6_spi3: spi@60 {
				reg = <0x60>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};
		};

		sbefifo@2400 {
			compatible = "ibm,p9-sbefifo";
			reg = <0x2400 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			fsi_occ6: occ {
				compatible = "ibm,p10-occ";
			};
		};

		fsi_hub6: hub@3400 {
			compatible = "fsi-master-hub";
			reg = <0x3400 0x400>;
			#address-cells = <2>;
			#size-cells = <0>;

			no-scan-on-init;
		};
	};

	cfam@7,0 { /* DCM3_C1 */
		reg = <7 0>;
		#address-cells = <1>;
		#size-cells = <1>;
		chip-id = <7>;

		scom@1000 {
			compatible = "ibm,fsi2pib";
			reg = <0x1000 0x400>;
		};

		i2c@1800 {
			compatible = "ibm,fsi-i2c-master";
			reg = <0x1800 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam7_i2c2: i2c-bus@2 {
				reg = <2>;	/* OM45 */
			};

			cfam7_i2c3: i2c-bus@3 {
				reg = <3>;	/* OM67 */
			};

			cfam7_i2c10: i2c-bus@a {
				reg = <10>;	/* OP3A */
			};

			cfam7_i2c11: i2c-bus@b {
				reg = <11>;	/* OP3B */
			};

			cfam7_i2c14: i2c-bus@e {
				reg = <14>;	/* OP5A */
			};

			cfam7_i2c15: i2c-bus@f {
				reg = <15>;	/* OP5B */
			};

			cfam7_i2c16: i2c-bus@10 {
				reg = <16>;	/* OP6A */
			};

			cfam7_i2c17: i2c-bus@11 {
				reg = <17>;	/* OP6B */
			};
		};

		fsi2spi@1c00 {
			compatible = "ibm,fsi2spi";
			reg = <0x1c00 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			cfam7_spi0: spi@0 {
				reg = <0x0>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam7_spi1: spi@20 {
				reg = <0x20>;
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam7_spi2: spi@40 {
				reg = <0x40>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};

			cfam7_spi3: spi@60 {
				reg = <0x60>;
				compatible = "ibm,fsi2spi-restricted";
				#address-cells = <1>;
				#size-cells = <0>;

				eeprom@0 {
					at25,byte-len = <0x80000>;
					at25,addr-mode = <4>;
					at25,page-size = <256>;

					compatible = "atmel,at25";
					reg = <0>;
					spi-max-frequency = <1000000>;
				};
			};
		};

		sbefifo@2400 {
			compatible = "ibm,p9-sbefifo";
			reg = <0x2400 0x400>;
			#address-cells = <1>;
			#size-cells = <0>;

			fsi_occ7: occ {
				compatible = "ibm,p10-occ";
			};
		};

		fsi_hub7: hub@3400 {
			compatible = "fsi-master-hub";
			reg = <0x3400 0x400>;
			#address-cells = <2>;
			#size-cells = <0>;

			no-scan-on-init;
		};
	};
};

/* Legacy OCC numbering (to get rid of when userspace is fixed) */
&fsi_occ0 {
	reg = <1>;
};

&fsi_occ1 {
	reg = <2>;
};

&fsi_occ2 {
	reg = <3>;
};

&fsi_occ3 {
	reg = <4>;
};

&fsi_occ4 {
	reg = <5>;
};

&fsi_occ5 {
	reg = <6>;
};

&fsi_occ6 {
	reg = <7>;
};

&fsi_occ7 {
	reg = <8>;
};

&ibt {
	status = "okay";
};

&vuart1 {
	status = "okay";
};

&vuart2 {
	status = "okay";
};

&lpc_ctrl {
	status = "okay";
	memory-region = <&flash_memory>;
};

&kcs4 {
	compatible = "openbmc,mctp-lpc";
	status = "okay";
};

&mac2 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_rmii3_default>;
	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
		 <&syscon ASPEED_CLK_MAC3RCLK>;
	clock-names = "MACCLK", "RCLK";
	use-ncsi;
};

&mac3 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_rmii4_default>;
	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
		 <&syscon ASPEED_CLK_MAC4RCLK>;
	clock-names = "MACCLK", "RCLK";
	use-ncsi;
};

&wdt1 {
	aspeed,reset-type = "none";
	aspeed,external-signal;
	aspeed,ext-push-pull;
	aspeed,ext-active-high;

	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_wdtrst1_default>;
};

&wdt2 {
	status = "okay";
};

&xdma {
	status = "okay";
	memory-region = <&vga_memory>;
};