From e71b7f1f44d3d88c677769c85ef0171caf9fc89f Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Wed, 4 May 2022 11:07:39 +0200 Subject: selftests: add ping test with ping_group_range tuned The 'ping' utility is able to manage two kind of sockets (raw or icmp), depending on the sysctl ping_group_range. By default, ping_group_range is set to '1 0', which forces ping to use an ip raw socket. Let's replay the ping tests by allowing 'ping' to use the ip icmp socket. After the previous patch, ipv4 tests results are the same with both kinds of socket. For ipv6, there are a lot a new failures (the previous patch fixes only two cases). Signed-off-by: Nicolas Dichtel Reviewed-by: David Ahern Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/fcnal-test.sh | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'tools') diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 47c4d4b4a44a..54701c8b0cd7 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -810,10 +810,16 @@ ipv4_ping() setup set_sysctl net.ipv4.raw_l3mdev_accept=1 2>/dev/null ipv4_ping_novrf + setup + set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null + ipv4_ping_novrf log_subsection "With VRF" setup "yes" ipv4_ping_vrf + setup "yes" + set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null + ipv4_ping_vrf } ################################################################################ @@ -2348,10 +2354,16 @@ ipv6_ping() log_subsection "No VRF" setup ipv6_ping_novrf + setup + set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null + ipv6_ping_novrf log_subsection "With VRF" setup "yes" ipv6_ping_vrf + setup "yes" + set_sysctl net.ipv4.ping_group_range='0 2147483647' 2>/dev/null + ipv6_ping_vrf } ################################################################################ -- cgit v1.2.3 From edae34a3ed9293b5077dddf9e51a3d86c95dc76a Mon Sep 17 00:00:00 2001 From: Lina Wang Date: Thu, 5 May 2022 13:48:50 +0800 Subject: selftests net: add UDP GRO fraglist + bpf self-tests When NET_F_F_GRO_FRAGLIST is enabled and bpf_skb_change_proto is used, check if udp packets and tcp packets are successfully delivered to user space. If wrong udp packets are delivered, udpgso_bench_rx will exit with "Initial byte out of range" Signed-off-by: Maciej enczykowski Signed-off-by: Lina Wang Signed-off-by: David S. Miller --- tools/testing/selftests/net/Makefile | 3 + tools/testing/selftests/net/bpf/Makefile | 14 ++ tools/testing/selftests/net/bpf/nat6to4.c | 285 ++++++++++++++++++++++++++ tools/testing/selftests/net/udpgro_frglist.sh | 101 +++++++++ 4 files changed, 403 insertions(+) create mode 100644 tools/testing/selftests/net/bpf/Makefile create mode 100644 tools/testing/selftests/net/bpf/nat6to4.c create mode 100755 tools/testing/selftests/net/udpgro_frglist.sh (limited to 'tools') diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 0f2ebc38d893..e1f998defd10 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -25,6 +25,7 @@ TEST_PROGS += bareudp.sh TEST_PROGS += amt.sh TEST_PROGS += unicast_extensions.sh TEST_PROGS += udpgro_fwd.sh +TEST_PROGS += udpgro_frglist.sh TEST_PROGS += veth.sh TEST_PROGS += ioam6.sh TEST_PROGS += gro.sh @@ -61,6 +62,8 @@ TEST_FILES := settings KSFT_KHDR_INSTALL := 1 include ../lib.mk +include bpf/Makefile + $(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma $(OUTPUT)/tcp_mmap: LDLIBS += -lpthread $(OUTPUT)/tcp_inq: LDLIBS += -lpthread diff --git a/tools/testing/selftests/net/bpf/Makefile b/tools/testing/selftests/net/bpf/Makefile new file mode 100644 index 000000000000..f91bf14bbee7 --- /dev/null +++ b/tools/testing/selftests/net/bpf/Makefile @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0 + +CLANG ?= clang +CCINCLUDE += -I../../bpf +CCINCLUDE += -I../../../../../usr/include/ + +TEST_CUSTOM_PROGS = $(OUTPUT)/bpf/nat6to4.o +all: $(TEST_CUSTOM_PROGS) + +$(OUTPUT)/%.o: %.c + $(CLANG) -O2 -target bpf -c $< $(CCINCLUDE) -o $@ + +clean: + rm -f $(TEST_CUSTOM_PROGS) diff --git a/tools/testing/selftests/net/bpf/nat6to4.c b/tools/testing/selftests/net/bpf/nat6to4.c new file mode 100644 index 000000000000..ac54c36b25fc --- /dev/null +++ b/tools/testing/selftests/net/bpf/nat6to4.c @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This code is taken from the Android Open Source Project and the author + * (Maciej Żenczykowski) has gave permission to relicense it under the + * GPLv2. Therefore this program is free software; + * You can redistribute it and/or modify it under the terms of the GNU + * General Public License version 2 as published by the Free Software + * Foundation + + * The original headers, including the original license headers, are + * included below for completeness. + * + * Copyright (C) 2019 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#include + +#include +#include + +#define IP_DF 0x4000 // Flag: "Don't Fragment" + +SEC("schedcls/ingress6/nat_6") +int sched_cls_ingress6_nat_6_prog(struct __sk_buff *skb) +{ + const int l2_header_size = sizeof(struct ethhdr); + void *data = (void *)(long)skb->data; + const void *data_end = (void *)(long)skb->data_end; + const struct ethhdr * const eth = data; // used iff is_ethernet + const struct ipv6hdr * const ip6 = (void *)(eth + 1); + + // Require ethernet dst mac address to be our unicast address. + if (skb->pkt_type != PACKET_HOST) + return TC_ACT_OK; + + // Must be meta-ethernet IPv6 frame + if (skb->protocol != bpf_htons(ETH_P_IPV6)) + return TC_ACT_OK; + + // Must have (ethernet and) ipv6 header + if (data + l2_header_size + sizeof(*ip6) > data_end) + return TC_ACT_OK; + + // Ethertype - if present - must be IPv6 + if (eth->h_proto != bpf_htons(ETH_P_IPV6)) + return TC_ACT_OK; + + // IP version must be 6 + if (ip6->version != 6) + return TC_ACT_OK; + // Maximum IPv6 payload length that can be translated to IPv4 + if (bpf_ntohs(ip6->payload_len) > 0xFFFF - sizeof(struct iphdr)) + return TC_ACT_OK; + switch (ip6->nexthdr) { + case IPPROTO_TCP: // For TCP & UDP the checksum neutrality of the chosen IPv6 + case IPPROTO_UDP: // address means there is no need to update their checksums. + case IPPROTO_GRE: // We do not need to bother looking at GRE/ESP headers, + case IPPROTO_ESP: // since there is never a checksum to update. + break; + default: // do not know how to handle anything else + return TC_ACT_OK; + } + + struct ethhdr eth2; // used iff is_ethernet + + eth2 = *eth; // Copy over the ethernet header (src/dst mac) + eth2.h_proto = bpf_htons(ETH_P_IP); // But replace the ethertype + + struct iphdr ip = { + .version = 4, // u4 + .ihl = sizeof(struct iphdr) / sizeof(__u32), // u4 + .tos = (ip6->priority << 4) + (ip6->flow_lbl[0] >> 4), // u8 + .tot_len = bpf_htons(bpf_ntohs(ip6->payload_len) + sizeof(struct iphdr)), // u16 + .id = 0, // u16 + .frag_off = bpf_htons(IP_DF), // u16 + .ttl = ip6->hop_limit, // u8 + .protocol = ip6->nexthdr, // u8 + .check = 0, // u16 + .saddr = 0x0201a8c0, // u32 + .daddr = 0x0101a8c0, // u32 + }; + + // Calculate the IPv4 one's complement checksum of the IPv4 header. + __wsum sum4 = 0; + + for (int i = 0; i < sizeof(ip) / sizeof(__u16); ++i) + sum4 += ((__u16 *)&ip)[i]; + + // Note that sum4 is guaranteed to be non-zero by virtue of ip.version == 4 + sum4 = (sum4 & 0xFFFF) + (sum4 >> 16); // collapse u32 into range 1 .. 0x1FFFE + sum4 = (sum4 & 0xFFFF) + (sum4 >> 16); // collapse any potential carry into u16 + ip.check = (__u16)~sum4; // sum4 cannot be zero, so this is never 0xFFFF + + // Calculate the *negative* IPv6 16-bit one's complement checksum of the IPv6 header. + __wsum sum6 = 0; + // We'll end up with a non-zero sum due to ip6->version == 6 (which has '0' bits) + for (int i = 0; i < sizeof(*ip6) / sizeof(__u16); ++i) + sum6 += ~((__u16 *)ip6)[i]; // note the bitwise negation + + // Note that there is no L4 checksum update: we are relying on the checksum neutrality + // of the ipv6 address chosen by netd's ClatdController. + + // Packet mutations begin - point of no return, but if this first modification fails + // the packet is probably still pristine, so let clatd handle it. + if (bpf_skb_change_proto(skb, bpf_htons(ETH_P_IP), 0)) + return TC_ACT_OK; + bpf_csum_update(skb, sum6); + + data = (void *)(long)skb->data; + data_end = (void *)(long)skb->data_end; + if (data + l2_header_size + sizeof(struct iphdr) > data_end) + return TC_ACT_SHOT; + + struct ethhdr *new_eth = data; + + // Copy over the updated ethernet header + *new_eth = eth2; + + // Copy over the new ipv4 header. + *(struct iphdr *)(new_eth + 1) = ip; + return bpf_redirect(skb->ifindex, BPF_F_INGRESS); +} + +SEC("schedcls/egress4/snat4") +int sched_cls_egress4_snat4_prog(struct __sk_buff *skb) +{ + const int l2_header_size = sizeof(struct ethhdr); + void *data = (void *)(long)skb->data; + const void *data_end = (void *)(long)skb->data_end; + const struct ethhdr *const eth = data; // used iff is_ethernet + const struct iphdr *const ip4 = (void *)(eth + 1); + + // Must be meta-ethernet IPv4 frame + if (skb->protocol != bpf_htons(ETH_P_IP)) + return TC_ACT_OK; + + // Must have ipv4 header + if (data + l2_header_size + sizeof(struct ipv6hdr) > data_end) + return TC_ACT_OK; + + // Ethertype - if present - must be IPv4 + if (eth->h_proto != bpf_htons(ETH_P_IP)) + return TC_ACT_OK; + + // IP version must be 4 + if (ip4->version != 4) + return TC_ACT_OK; + + // We cannot handle IP options, just standard 20 byte == 5 dword minimal IPv4 header + if (ip4->ihl != 5) + return TC_ACT_OK; + + // Maximum IPv6 payload length that can be translated to IPv4 + if (bpf_htons(ip4->tot_len) > 0xFFFF - sizeof(struct ipv6hdr)) + return TC_ACT_OK; + + // Calculate the IPv4 one's complement checksum of the IPv4 header. + __wsum sum4 = 0; + + for (int i = 0; i < sizeof(*ip4) / sizeof(__u16); ++i) + sum4 += ((__u16 *)ip4)[i]; + + // Note that sum4 is guaranteed to be non-zero by virtue of ip4->version == 4 + sum4 = (sum4 & 0xFFFF) + (sum4 >> 16); // collapse u32 into range 1 .. 0x1FFFE + sum4 = (sum4 & 0xFFFF) + (sum4 >> 16); // collapse any potential carry into u16 + // for a correct checksum we should get *a* zero, but sum4 must be positive, ie 0xFFFF + if (sum4 != 0xFFFF) + return TC_ACT_OK; + + // Minimum IPv4 total length is the size of the header + if (bpf_ntohs(ip4->tot_len) < sizeof(*ip4)) + return TC_ACT_OK; + + // We are incapable of dealing with IPv4 fragments + if (ip4->frag_off & ~bpf_htons(IP_DF)) + return TC_ACT_OK; + + switch (ip4->protocol) { + case IPPROTO_TCP: // For TCP & UDP the checksum neutrality of the chosen IPv6 + case IPPROTO_GRE: // address means there is no need to update their checksums. + case IPPROTO_ESP: // We do not need to bother looking at GRE/ESP headers, + break; // since there is never a checksum to update. + + case IPPROTO_UDP: // See above comment, but must also have UDP header... + if (data + sizeof(*ip4) + sizeof(struct udphdr) > data_end) + return TC_ACT_OK; + const struct udphdr *uh = (const struct udphdr *)(ip4 + 1); + // If IPv4/UDP checksum is 0 then fallback to clatd so it can calculate the + // checksum. Otherwise the network or more likely the NAT64 gateway might + // drop the packet because in most cases IPv6/UDP packets with a zero checksum + // are invalid. See RFC 6935. TODO: calculate checksum via bpf_csum_diff() + if (!uh->check) + return TC_ACT_OK; + break; + + default: // do not know how to handle anything else + return TC_ACT_OK; + } + struct ethhdr eth2; // used iff is_ethernet + + eth2 = *eth; // Copy over the ethernet header (src/dst mac) + eth2.h_proto = bpf_htons(ETH_P_IPV6); // But replace the ethertype + + struct ipv6hdr ip6 = { + .version = 6, // __u8:4 + .priority = ip4->tos >> 4, // __u8:4 + .flow_lbl = {(ip4->tos & 0xF) << 4, 0, 0}, // __u8[3] + .payload_len = bpf_htons(bpf_ntohs(ip4->tot_len) - 20), // __be16 + .nexthdr = ip4->protocol, // __u8 + .hop_limit = ip4->ttl, // __u8 + }; + ip6.saddr.in6_u.u6_addr32[0] = bpf_htonl(0x20010db8); + ip6.saddr.in6_u.u6_addr32[1] = 0; + ip6.saddr.in6_u.u6_addr32[2] = 0; + ip6.saddr.in6_u.u6_addr32[3] = bpf_htonl(1); + ip6.daddr.in6_u.u6_addr32[0] = bpf_htonl(0x20010db8); + ip6.daddr.in6_u.u6_addr32[1] = 0; + ip6.daddr.in6_u.u6_addr32[2] = 0; + ip6.daddr.in6_u.u6_addr32[3] = bpf_htonl(2); + + // Calculate the IPv6 16-bit one's complement checksum of the IPv6 header. + __wsum sum6 = 0; + // We'll end up with a non-zero sum due to ip6.version == 6 + for (int i = 0; i < sizeof(ip6) / sizeof(__u16); ++i) + sum6 += ((__u16 *)&ip6)[i]; + + // Packet mutations begin - point of no return, but if this first modification fails + // the packet is probably still pristine, so let clatd handle it. + if (bpf_skb_change_proto(skb, bpf_htons(ETH_P_IPV6), 0)) + return TC_ACT_OK; + + // This takes care of updating the skb->csum field for a CHECKSUM_COMPLETE packet. + // In such a case, skb->csum is a 16-bit one's complement sum of the entire payload, + // thus we need to subtract out the ipv4 header's sum, and add in the ipv6 header's sum. + // However, we've already verified the ipv4 checksum is correct and thus 0. + // Thus we only need to add the ipv6 header's sum. + // + // bpf_csum_update() always succeeds if the skb is CHECKSUM_COMPLETE and returns an error + // (-ENOTSUPP) if it isn't. So we just ignore the return code (see above for more details). + bpf_csum_update(skb, sum6); + + // bpf_skb_change_proto() invalidates all pointers - reload them. + data = (void *)(long)skb->data; + data_end = (void *)(long)skb->data_end; + + // I cannot think of any valid way for this error condition to trigger, however I do + // believe the explicit check is required to keep the in kernel ebpf verifier happy. + if (data + l2_header_size + sizeof(ip6) > data_end) + return TC_ACT_SHOT; + + struct ethhdr *new_eth = data; + + // Copy over the updated ethernet header + *new_eth = eth2; + // Copy over the new ipv4 header. + *(struct ipv6hdr *)(new_eth + 1) = ip6; + return TC_ACT_OK; +} + +char _license[] SEC("license") = ("GPL"); diff --git a/tools/testing/selftests/net/udpgro_frglist.sh b/tools/testing/selftests/net/udpgro_frglist.sh new file mode 100755 index 000000000000..807b74c8fd80 --- /dev/null +++ b/tools/testing/selftests/net/udpgro_frglist.sh @@ -0,0 +1,101 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Run a series of udpgro benchmarks + +readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)" + +cleanup() { + local -r jobs="$(jobs -p)" + local -r ns="$(ip netns list|grep $PEER_NS)" + + [ -n "${jobs}" ] && kill -INT ${jobs} 2>/dev/null + [ -n "$ns" ] && ip netns del $ns 2>/dev/null +} +trap cleanup EXIT + +run_one() { + # use 'rx' as separator between sender args and receiver args + local -r all="$@" + local -r tx_args=${all%rx*} + local rx_args=${all#*rx} + + + + ip netns add "${PEER_NS}" + ip -netns "${PEER_NS}" link set lo up + ip link add type veth + ip link set dev veth0 up + ip addr add dev veth0 192.168.1.2/24 + ip addr add dev veth0 2001:db8::2/64 nodad + + ip link set dev veth1 netns "${PEER_NS}" + ip -netns "${PEER_NS}" addr add dev veth1 192.168.1.1/24 + ip -netns "${PEER_NS}" addr add dev veth1 2001:db8::1/64 nodad + ip -netns "${PEER_NS}" link set dev veth1 up + ip netns exec "${PEER_NS}" ethtool -K veth1 rx-gro-list on + + + ip -n "${PEER_NS}" link set veth1 xdp object ../bpf/xdp_dummy.o section xdp_dummy + tc -n "${PEER_NS}" qdisc add dev veth1 clsact + tc -n "${PEER_NS}" filter add dev veth1 ingress prio 4 protocol ipv6 bpf object-file ../bpf/nat6to4.o section schedcls/ingress6/nat_6 direct-action + tc -n "${PEER_NS}" filter add dev veth1 egress prio 4 protocol ip bpf object-file ../bpf/nat6to4.o section schedcls/egress4/snat4 direct-action + echo ${rx_args} + ip netns exec "${PEER_NS}" ./udpgso_bench_rx ${rx_args} -r & + + # Hack: let bg programs complete the startup + sleep 0.1 + ./udpgso_bench_tx ${tx_args} +} + +run_in_netns() { + local -r args=$@ + echo ${args} + ./in_netns.sh $0 __subprocess ${args} +} + +run_udp() { + local -r args=$@ + + echo "udp gso - over veth touching data" + run_in_netns ${args} -u -S 0 rx -4 -v + + echo "udp gso and gro - over veth touching data" + run_in_netns ${args} -S 0 rx -4 -G +} + +run_tcp() { + local -r args=$@ + + echo "tcp - over veth touching data" + run_in_netns ${args} -t rx -4 -t +} + +run_all() { + local -r core_args="-l 4" + local -r ipv4_args="${core_args} -4 -D 192.168.1.1" + local -r ipv6_args="${core_args} -6 -D 2001:db8::1" + + echo "ipv6" + run_tcp "${ipv6_args}" + run_udp "${ipv6_args}" +} + +if [ ! -f ../bpf/xdp_dummy.o ]; then + echo "Missing xdp_dummy helper. Build bpf selftest first" + exit -1 +fi + +if [ ! -f bpf/nat6to4.o ]; then + echo "Missing nat6to4 helper. Build bpfnat6to4.o selftest first" + exit -1 +fi + +if [[ $# -eq 0 ]]; then + run_all +elif [[ $1 == "__subprocess" ]]; then + shift + run_one $@ +else + run_in_netns $@ +fi -- cgit v1.2.3