From 5484f0334439701900121a107709c461215cadb6 Mon Sep 17 00:00:00 2001 From: Todd Brandt Date: Mon, 8 Oct 2018 15:56:31 -0700 Subject: PM / tools: sleepgraph: first batch of v5.2 changes general: - add battery charge data before and after test - remove special s0i3 handling - remove melding of dmesg & ftrace data in old kernels, use one only - updates to various kprobes in trace (ksys_sync, etc) - enable pm_debug_messages during the test - instrument more subsystems with dev functions (phy0) error handling: - return codes for tool show the status of the test run - 0: success, 1: general error (no timeline), 2: fail (suspend aborted) - monitor output of /sys/power/state, mark as failure if exception occurs - add signal handler when using -result to catch tool exceptions display control - add -x commands for testing xset with mode settings and status - allow display setting to on, off, suspend, standby - add display mode change info to the log, along with a warning on fail s2idle (freeze) - remove fixed 10-phase dependency, allow any phase order & any count - multiple phase occurences show as phase_nameN e.g. suspend_noirq3 - if multiple freezes occur, print multiple time values in header summary: - add new columns to summary output: issues, worst suspend/resume devices - worst device: includes summation of all phases of suspend or resume - issues: includes WARNING/ERROR/BUG from dmesg log, and other issues - s2idle: multiple freezes show as FREEZExN in the issues column Signed-off-by: Todd Brandt Signed-off-by: Rafael J. Wysocki --- tools/power/pm-graph/Makefile | 4 +- tools/power/pm-graph/sleepgraph.8 | 13 +- tools/power/pm-graph/sleepgraph.py | 1378 +++++++++++++++++++----------------- 3 files changed, 760 insertions(+), 635 deletions(-) (limited to 'tools/power') diff --git a/tools/power/pm-graph/Makefile b/tools/power/pm-graph/Makefile index c1899cd72c80..845541544570 100644 --- a/tools/power/pm-graph/Makefile +++ b/tools/power/pm-graph/Makefile @@ -23,8 +23,8 @@ install : uninstall install -m 644 config/suspend-x2-proc.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config install -d $(DESTDIR)$(PREFIX)/bin - ln -s $(DESTDIR)$(PREFIX)/lib/pm-graph/bootgraph.py $(DESTDIR)$(PREFIX)/bin/bootgraph - ln -s $(DESTDIR)$(PREFIX)/lib/pm-graph/sleepgraph.py $(DESTDIR)$(PREFIX)/bin/sleepgraph + ln -s ../lib/pm-graph/bootgraph.py $(DESTDIR)$(PREFIX)/bin/bootgraph + ln -s ../lib/pm-graph/sleepgraph.py $(DESTDIR)$(PREFIX)/bin/sleepgraph install -d $(DESTDIR)$(PREFIX)/share/man/man8 install bootgraph.8 $(DESTDIR)$(PREFIX)/share/man/man8 diff --git a/tools/power/pm-graph/sleepgraph.8 b/tools/power/pm-graph/sleepgraph.8 index 070be2cf7f74..24a2e7d0ae63 100644 --- a/tools/power/pm-graph/sleepgraph.8 +++ b/tools/power/pm-graph/sleepgraph.8 @@ -65,9 +65,9 @@ During test, enable/disable runtime suspend for all devices. The test is delayed by 5 seconds to allow runtime suspend changes to occur. The settings are restored after the test is complete. .TP -\fB-display \fIon/off\fR -Turn the display on or off for the test using the xset command. This helps -maintain the consistecy of test data for better comparison. +\fB-display \fIon/off/standby/suspend\fR +Switch the display to the requested mode for the test using the xset command. +This helps maintain the consistency of test data for better comparison. .TP \fB-skiphtml\fR Run the test and capture the trace logs, but skip the timeline generation. @@ -183,6 +183,13 @@ Print out the contents of the ACPI Firmware Performance Data Table. \fB-battery\fR Print out battery status and current charge. .TP +\fB-xon/-xoff/-xstandby/-xsuspend\fR +Test xset by attempting to switch the display to the given mode. This +is the same command which will be issued by \fB-display \fImode\fR. +.TP +\fB-xstat\fR +Get the current DPMS display mode. +.TP \fB-sysinfo\fR Print out system info extracted from BIOS. Reads /dev/mem directly instead of going through dmidecode. .TP diff --git a/tools/power/pm-graph/sleepgraph.py b/tools/power/pm-graph/sleepgraph.py index 0c760478f7d7..343e8000d9ca 100755 --- a/tools/power/pm-graph/sleepgraph.py +++ b/tools/power/pm-graph/sleepgraph.py @@ -54,6 +54,7 @@ import os import string import re import platform +import signal from datetime import datetime import struct import ConfigParser @@ -72,7 +73,7 @@ class SystemValues: version = '5.1' ansi = False rs = 0 - display = 0 + display = '' gzip = False sync = False verbose = False @@ -99,6 +100,7 @@ class SystemValues: tpath = '/sys/kernel/debug/tracing/' fpdtpath = '/sys/firmware/acpi/tables/FPDT' epath = '/sys/kernel/debug/tracing/events/power/' + pmdpath = '/sys/power/pm_debug_messages' traceevents = [ 'suspend_resume', 'device_pm_callback_end', @@ -141,12 +143,10 @@ class SystemValues: devprops = dict() predelay = 0 postdelay = 0 - procexecfmt = 'ps - (?P.*)$' - devpropfmt = '# Device Properties: .*' - tracertypefmt = '# tracer: (?P.*)' - firmwarefmt = '# fwsuspend (?P[0-9]*) fwresume (?P[0-9]*)$' + pmdebug = '' tracefuncs = { 'sys_sync': {}, + 'ksys_sync': {}, '__pm_notifier_call_chain': {}, 'pm_prepare_console': {}, 'pm_notifier_call_chain': {}, @@ -187,7 +187,6 @@ class SystemValues: dev_tracefuncs = { # general wait/delay/sleep 'msleep': { 'args_x86_64': {'time':'%di:s32'}, 'ub': 1 }, - 'schedule_timeout_uninterruptible': { 'args_x86_64': {'timeout':'%di:s32'}, 'ub': 1 }, 'schedule_timeout': { 'args_x86_64': {'timeout':'%di:s32'}, 'ub': 1 }, 'udelay': { 'func':'__const_udelay', 'args_x86_64': {'loops':'%di:s32'}, 'ub': 1 }, 'usleep_range': { 'args_x86_64': {'min':'%di:s32', 'max':'%si:s32'}, 'ub': 1 }, @@ -199,6 +198,9 @@ class SystemValues: # filesystem 'ext4_sync_fs': {}, # 80211 + 'ath10k_bmi_read_memory': { 'args_x86_64': {'length':'%cx:s32'} }, + 'ath10k_bmi_write_memory': { 'args_x86_64': {'length':'%cx:s32'} }, + 'ath10k_bmi_fast_download': { 'args_x86_64': {'length':'%cx:s32'} }, 'iwlagn_mac_start': {}, 'iwlagn_alloc_bcast_station': {}, 'iwl_trans_pcie_start_hw': {}, @@ -241,6 +243,7 @@ class SystemValues: timeformat = '%.3f' cmdline = '%s %s' % \ (os.path.basename(sys.argv[0]), ' '.join(sys.argv[1:])) + sudouser = '' def __init__(self): self.archargs = 'args_'+platform.machine() self.hostname = platform.node() @@ -256,10 +259,32 @@ class SystemValues: if (hasattr(sys.stdout, 'isatty') and sys.stdout.isatty()): self.ansi = True self.testdir = datetime.now().strftime('suspend-%y%m%d-%H%M%S') + if os.getuid() == 0 and 'SUDO_USER' in os.environ and \ + os.environ['SUDO_USER']: + self.sudouser = os.environ['SUDO_USER'] def vprint(self, msg): self.logmsg += msg+'\n' - if(self.verbose): + if self.verbose or msg.startswith('WARNING:'): print(msg) + def signalHandler(self, signum, frame): + if not self.result: + return + signame = self.signames[signum] if signum in self.signames else 'UNKNOWN' + msg = 'Signal %s caused a tool exit, line %d' % (signame, frame.f_lineno) + sysvals.outputResult({'error':msg}) + sys.exit(3) + def signalHandlerInit(self): + capture = ['BUS', 'SYS', 'XCPU', 'XFSZ', 'PWR', 'HUP', 'INT', 'QUIT', + 'ILL', 'ABRT', 'FPE', 'SEGV', 'TERM', 'TSTP'] + self.signames = dict() + for i in capture: + s = 'SIG'+i + try: + signum = getattr(signal, s) + signal.signal(signum, self.signalHandler) + except: + continue + self.signames[signum] = s def rootCheck(self, fatal=True): if(os.access(self.powerfile, os.W_OK)): return True @@ -267,7 +292,7 @@ class SystemValues: msg = 'This command requires sysfs mount and root access' print('ERROR: %s\n') % msg self.outputResult({'error':msg}) - sys.exit() + sys.exit(1) return False def rootUser(self, fatal=False): if 'USER' in os.environ and os.environ['USER'] == 'root': @@ -276,7 +301,7 @@ class SystemValues: msg = 'This command must be run as root' print('ERROR: %s\n') % msg self.outputResult({'error':msg}) - sys.exit() + sys.exit(1) return False def getExec(self, cmd): dirlist = ['/sbin', '/bin', '/usr/sbin', '/usr/bin', @@ -406,8 +431,8 @@ class SystemValues: ktime = m.group('ktime') fp.close() self.dmesgstart = float(ktime) - def getdmesg(self, fwdata=[]): - op = self.writeDatafileHeader(sysvals.dmesgfile, fwdata) + def getdmesg(self, testdata): + op = self.writeDatafileHeader(sysvals.dmesgfile, testdata) # store all new dmesg lines since initdmesg was called fp = Popen('dmesg', stdout=PIPE).stdout for line in fp: @@ -619,6 +644,8 @@ class SystemValues: self.fsetVal('0', 'events/kprobes/enable') self.fsetVal('', 'kprobe_events') self.fsetVal('1024', 'buffer_size_kb') + if self.pmdebug: + self.setVal(self.pmdebug, self.pmdpath) def setupAllKprobes(self): for name in self.tracefuncs: self.defaultKprobe(name, self.tracefuncs[name]) @@ -641,6 +668,11 @@ class SystemValues: # turn trace off self.fsetVal('0', 'tracing_on') self.cleanupFtrace() + # pm debug messages + pv = self.getVal(self.pmdpath) + if pv != '1': + self.setVal('1', self.pmdpath) + self.pmdebug = pv # set the trace clock to global self.fsetVal('global', 'trace_clock') self.fsetVal('nop', 'current_tracer') @@ -728,19 +760,24 @@ class SystemValues: if not self.ansi: return str return '\x1B[%d;40m%s\x1B[m' % (color, str) - def writeDatafileHeader(self, filename, fwdata=[]): + def writeDatafileHeader(self, filename, testdata): fp = self.openlog(filename, 'w') fp.write('%s\n%s\n# command | %s\n' % (self.teststamp, self.sysstamp, self.cmdline)) - if(self.suspendmode == 'mem' or self.suspendmode == 'command'): - for fw in fwdata: + for test in testdata: + if 'fw' in test: + fw = test['fw'] if(fw): fp.write('# fwsuspend %u fwresume %u\n' % (fw[0], fw[1])) + if 'bat' in test: + (a1, c1), (a2, c2) = test['bat'] + fp.write('# battery %s %d %s %d\n' % (a1, c1, a2, c2)) + if test['error'] or len(testdata) > 1: + fp.write('# enter_sleep_error %s\n' % test['error']) return fp - def sudouser(self, dir): - if os.path.exists(dir) and os.getuid() == 0 and \ - 'SUDO_USER' in os.environ: + def sudoUserchown(self, dir): + if os.path.exists(dir) and self.sudouser: cmd = 'chown -R {0}:{0} {1} > /dev/null 2>&1' - call(cmd.format(os.environ['SUDO_USER'], dir), shell=True) + call(cmd.format(self.sudouser, dir), shell=True) def outputResult(self, testdata, num=0): if not self.result: return @@ -762,7 +799,7 @@ class SystemValues: if 'bugurl' in testdata: fp.write('url%s: %s\n' % (n, testdata['bugurl'])) fp.close() - self.sudouser(self.result) + self.sudoUserchown(self.result) def configFile(self, file): dir = os.path.dirname(os.path.realpath(__file__)) if os.path.exists(file): @@ -800,11 +837,12 @@ suspendmodename = { # Simple class which holds property values collected # for all the devices used in the timeline. class DevProps: - syspath = '' - altname = '' - async = True - xtraclass = '' - xtrainfo = '' + def __init__(self): + self.syspath = '' + self.altname = '' + self.async = True + self.xtraclass = '' + self.xtrainfo = '' def out(self, dev): return '%s,%s,%d;' % (dev, self.altname, self.async) def debug(self, dev): @@ -831,9 +869,6 @@ class DevProps: # A container used to create a device hierachy, with a single root node # and a tree of child nodes. Used by Data.deviceTopology() class DeviceNode: - name = '' - children = 0 - depth = 0 def __init__(self, nodename, nodedepth): self.name = nodename self.children = [] @@ -861,71 +896,78 @@ class DeviceNode: # } # class Data: - dmesg = {} # root data structure - phases = [] # ordered list of phases - start = 0.0 # test start - end = 0.0 # test end - tSuspended = 0.0 # low-level suspend start - tResumed = 0.0 # low-level resume start - tKernSus = 0.0 # kernel level suspend start - tKernRes = 0.0 # kernel level resume end - tLow = 0.0 # time spent in low-level suspend (standby/freeze) - fwValid = False # is firmware data available - fwSuspend = 0 # time spent in firmware suspend - fwResume = 0 # time spent in firmware resume - dmesgtext = [] # dmesg text file in memory - pstl = 0 # process timeline - testnumber = 0 - idstr = '' - html_device_id = 0 - stamp = 0 - outfile = '' - devpids = [] - kerror = False + phasedef = { + 'suspend_prepare': {'order': 0, 'color': '#CCFFCC'}, + 'suspend': {'order': 1, 'color': '#88FF88'}, + 'suspend_late': {'order': 2, 'color': '#00AA00'}, + 'suspend_noirq': {'order': 3, 'color': '#008888'}, + 'suspend_machine': {'order': 4, 'color': '#0000FF'}, + 'resume_machine': {'order': 5, 'color': '#FF0000'}, + 'resume_noirq': {'order': 6, 'color': '#FF9900'}, + 'resume_early': {'order': 7, 'color': '#FFCC00'}, + 'resume': {'order': 8, 'color': '#FFFF88'}, + 'resume_complete': {'order': 9, 'color': '#FFFFCC'}, + } + errlist = { + 'HWERROR' : '.*\[ *Hardware Error *\].*', + 'FWBUG' : '.*\[ *Firmware Bug *\].*', + 'BUG' : '.*BUG.*', + 'ERROR' : '.*ERROR.*', + 'WARNING' : '.*WARNING.*', + 'IRQ' : '.*genirq: .*', + 'TASKFAIL': '.*Freezing of tasks failed.*', + } def __init__(self, num): idchar = 'abcdefghij' - self.pstl = dict() + self.start = 0.0 # test start + self.end = 0.0 # test end + self.tSuspended = 0.0 # low-level suspend start + self.tResumed = 0.0 # low-level resume start + self.tKernSus = 0.0 # kernel level suspend start + self.tKernRes = 0.0 # kernel level resume end + self.fwValid = False # is firmware data available + self.fwSuspend = 0 # time spent in firmware suspend + self.fwResume = 0 # time spent in firmware resume + self.html_device_id = 0 + self.stamp = 0 + self.outfile = '' + self.kerror = False + self.battery = 0 + self.enterfail = '' + self.currphase = '' + self.pstl = dict() # process timeline self.testnumber = num self.idstr = idchar[num] - self.dmesgtext = [] - self.phases = [] - self.dmesg = { # fixed list of 10 phases - 'suspend_prepare': {'list': dict(), 'start': -1.0, 'end': -1.0, - 'row': 0, 'color': '#CCFFCC', 'order': 0}, - 'suspend': {'list': dict(), 'start': -1.0, 'end': -1.0, - 'row': 0, 'color': '#88FF88', 'order': 1}, - 'suspend_late': {'list': dict(), 'start': -1.0, 'end': -1.0, - 'row': 0, 'color': '#00AA00', 'order': 2}, - 'suspend_noirq': {'list': dict(), 'start': -1.0, 'end': -1.0, - 'row': 0, 'color': '#008888', 'order': 3}, - 'suspend_machine': {'list': dict(), 'start': -1.0, 'end': -1.0, - 'row': 0, 'color': '#0000FF', 'order': 4}, - 'resume_machine': {'list': dict(), 'start': -1.0, 'end': -1.0, - 'row': 0, 'color': '#FF0000', 'order': 5}, - 'resume_noirq': {'list': dict(), 'start': -1.0, 'end': -1.0, - 'row': 0, 'color': '#FF9900', 'order': 6}, - 'resume_early': {'list': dict(), 'start': -1.0, 'end': -1.0, - 'row': 0, 'color': '#FFCC00', 'order': 7}, - 'resume': {'list': dict(), 'start': -1.0, 'end': -1.0, - 'row': 0, 'color': '#FFFF88', 'order': 8}, - 'resume_complete': {'list': dict(), 'start': -1.0, 'end': -1.0, - 'row': 0, 'color': '#FFFFCC', 'order': 9} - } - self.phases = self.sortedPhases() + self.dmesgtext = [] # dmesg text file in memory + self.dmesg = dict() # root data structure + self.errorinfo = {'suspend':[],'resume':[]} + self.tLow = [] # time spent in low-level suspends (standby/freeze) + self.devpids = [] + self.devicegroups = 0 + def sortedPhases(self): + return sorted(self.dmesg, key=lambda k:self.dmesg[k]['order']) + def initDevicegroups(self): + # called when phases are all finished being added + for phase in self.dmesg.keys(): + if '*' in phase: + p = phase.split('*') + pnew = '%s%d' % (p[0], len(p)) + self.dmesg[pnew] = self.dmesg.pop(phase) self.devicegroups = [] - for phase in self.phases: + for phase in self.sortedPhases(): self.devicegroups.append([phase]) - self.errorinfo = {'suspend':[],'resume':[]} + def nextPhase(self, phase, offset): + order = self.dmesg[phase]['order'] + offset + for p in self.dmesg: + if self.dmesg[p]['order'] == order: + return p + return '' + def lastPhase(self): + plist = self.sortedPhases() + if len(plist) < 1: + return '' + return plist[-1] def extractErrorInfo(self): - elist = { - 'HWERROR' : '.*\[ *Hardware Error *\].*', - 'FWBUG' : '.*\[ *Firmware Bug *\].*', - 'BUG' : '.*BUG.*', - 'ERROR' : '.*ERROR.*', - 'WARNING' : '.*WARNING.*', - 'IRQ' : '.*genirq: .*', - 'TASKFAIL': '.*Freezing of tasks failed.*', - } lf = sysvals.openlog(sysvals.dmesgfile, 'r') i = 0 list = [] @@ -939,8 +981,8 @@ class Data: continue dir = 'suspend' if t < self.tSuspended else 'resume' msg = m.group('msg') - for err in elist: - if re.match(elist[err], msg): + for err in self.errlist: + if re.match(self.errlist[err], msg): list.append((err, dir, t, i, i)) self.kerror = True break @@ -956,7 +998,7 @@ class Data: def setEnd(self, time): self.end = time def isTraceEventOutsideDeviceCalls(self, pid, time): - for phase in self.phases: + for phase in self.sortedPhases(): list = self.dmesg[phase]['list'] for dev in list: d = list[dev] @@ -964,16 +1006,10 @@ class Data: time < d['end']): return False return True - def phaseCollision(self, phase, isbegin, line): - key = 'end' - if isbegin: - key = 'start' - if self.dmesg[phase][key] >= 0: - sysvals.vprint('IGNORE: %s' % line.strip()) - return True - return False def sourcePhase(self, start): - for phase in self.phases: + for phase in self.sortedPhases(): + if 'machine' in phase: + continue pend = self.dmesg[phase]['end'] if start <= pend: return phase @@ -1004,14 +1040,15 @@ class Data: return tgtdev def addDeviceFunctionCall(self, displayname, kprobename, proc, pid, start, end, cdata, rdata): # try to place the call in a device - tgtdev = self.sourceDevice(self.phases, start, end, pid, 'device') + phases = self.sortedPhases() + tgtdev = self.sourceDevice(phases, start, end, pid, 'device') # calls with device pids that occur outside device bounds are dropped # TODO: include these somehow if not tgtdev and pid in self.devpids: return False # try to place the call in a thread if not tgtdev: - tgtdev = self.sourceDevice(self.phases, start, end, pid, 'thread') + tgtdev = self.sourceDevice(phases, start, end, pid, 'thread') # create new thread blocks, expand as new calls are found if not tgtdev: if proc == '<...>': @@ -1053,7 +1090,7 @@ class Data: def overflowDevices(self): # get a list of devices that extend beyond the end of this test run devlist = [] - for phase in self.phases: + for phase in self.sortedPhases(): list = self.dmesg[phase]['list'] for devname in list: dev = list[devname] @@ -1064,7 +1101,7 @@ class Data: # merge any devices that overlap devlist for dev in devlist: devname = dev['name'] - for phase in self.phases: + for phase in self.sortedPhases(): list = self.dmesg[phase]['list'] if devname not in list: continue @@ -1079,7 +1116,7 @@ class Data: del list[devname] def usurpTouchingThread(self, name, dev): # the caller test has priority of this thread, give it to him - for phase in self.phases: + for phase in self.sortedPhases(): list = self.dmesg[phase]['list'] if name in list: tdev = list[name] @@ -1093,7 +1130,7 @@ class Data: break def stitchTouchingThreads(self, testlist): # merge any threads between tests that touch - for phase in self.phases: + for phase in self.sortedPhases(): list = self.dmesg[phase]['list'] for devname in list: dev = list[devname] @@ -1103,7 +1140,7 @@ class Data: data.usurpTouchingThread(devname, dev) def optimizeDevSrc(self): # merge any src call loops to reduce timeline size - for phase in self.phases: + for phase in self.sortedPhases(): list = self.dmesg[phase]['list'] for dev in list: if 'src' not in list[dev]: @@ -1141,7 +1178,7 @@ class Data: self.tKernSus = self.trimTimeVal(self.tKernSus, t0, dT, left) self.tKernRes = self.trimTimeVal(self.tKernRes, t0, dT, left) self.end = self.trimTimeVal(self.end, t0, dT, left) - for phase in self.phases: + for phase in self.sortedPhases(): p = self.dmesg[phase] p['start'] = self.trimTimeVal(p['start'], t0, dT, left) p['end'] = self.trimTimeVal(p['end'], t0, dT, left) @@ -1150,6 +1187,7 @@ class Data: d = list[name] d['start'] = self.trimTimeVal(d['start'], t0, dT, left) d['end'] = self.trimTimeVal(d['end'], t0, dT, left) + d['length'] = d['end'] - d['start'] if('ftrace' in d): cg = d['ftrace'] cg.start = self.trimTimeVal(cg.start, t0, dT, left) @@ -1166,30 +1204,59 @@ class Data: tm = self.trimTimeVal(tm, t0, dT, left) list.append((type, tm, idx1, idx2)) self.errorinfo[dir] = list - def normalizeTime(self, tZero): + def trimFreezeTime(self, tZero): # trim out any standby or freeze clock time - if(self.tSuspended != self.tResumed): - if(self.tResumed > tZero): - self.trimTime(self.tSuspended, \ - self.tResumed-self.tSuspended, True) - else: - self.trimTime(self.tSuspended, \ - self.tResumed-self.tSuspended, False) + lp = '' + for phase in self.sortedPhases(): + if 'resume_machine' in phase and 'suspend_machine' in lp: + tS, tR = self.dmesg[lp]['end'], self.dmesg[phase]['start'] + tL = tR - tS + if tL > 0: + left = True if tR > tZero else False + self.trimTime(tS, tL, left) + self.tLow.append('%.0f'%(tL*1000)) + lp = phase def getTimeValues(self): - sktime = (self.dmesg['suspend_machine']['end'] - \ - self.tKernSus) * 1000 - rktime = (self.dmesg['resume_complete']['end'] - \ - self.dmesg['resume_machine']['start']) * 1000 + if 'suspend_machine' in self.dmesg: + sktime = (self.dmesg['suspend_machine']['end'] - \ + self.tKernSus) * 1000 + else: + sktime = (self.tSuspended - self.tKernSus) * 1000 + if 'resume_machine' in self.dmesg: + rktime = (self.tKernRes - \ + self.dmesg['resume_machine']['start']) * 1000 + else: + rktime = (self.tKernRes - self.tResumed) * 1000 return (sktime, rktime) - def setPhase(self, phase, ktime, isbegin): + def setPhase(self, phase, ktime, isbegin, order=-1): if(isbegin): + # phase start over current phase + if self.currphase: + if 'resume_machine' not in self.currphase: + sysvals.vprint('WARNING: phase %s failed to end' % self.currphase) + self.dmesg[self.currphase]['end'] = ktime + phases = self.dmesg.keys() + color = self.phasedef[phase]['color'] + count = len(phases) if order < 0 else order + # create unique name for every new phase + while phase in phases: + phase += '*' + self.dmesg[phase] = {'list': dict(), 'start': -1.0, 'end': -1.0, + 'row': 0, 'color': color, 'order': count} self.dmesg[phase]['start'] = ktime + self.currphase = phase else: + # phase end without a start + if phase not in self.currphase: + if self.currphase: + sysvals.vprint('WARNING: %s ended instead of %s, ftrace corruption?' % (phase, self.currphase)) + else: + sysvals.vprint('WARNING: %s ended without a start, ftrace corruption?' % phase) + return phase + phase = self.currphase self.dmesg[phase]['end'] = ktime - def dmesgSortVal(self, phase): - return self.dmesg[phase]['order'] - def sortedPhases(self): - return sorted(self.dmesg, key=self.dmesgSortVal) + self.currphase = '' + return phase def sortedDevices(self, phase): list = self.dmesg[phase]['list'] slist = [] @@ -1208,13 +1275,13 @@ class Data: for devname in phaselist: dev = phaselist[devname] if(dev['end'] < 0): - for p in self.phases: + for p in self.sortedPhases(): if self.dmesg[p]['end'] > dev['start']: dev['end'] = self.dmesg[p]['end'] break sysvals.vprint('%s (%s): callback didnt return' % (devname, phase)) def deviceFilter(self, devicefilter): - for phase in self.phases: + for phase in self.sortedPhases(): list = self.dmesg[phase]['list'] rmlist = [] for name in list: @@ -1229,7 +1296,7 @@ class Data: del list[name] def fixupInitcallsThatDidntReturn(self): # if any calls never returned, clip them at system resume end - for phase in self.phases: + for phase in self.sortedPhases(): self.fixupInitcalls(phase) def phaseOverlap(self, phases): rmgroups = [] @@ -1248,17 +1315,18 @@ class Data: self.devicegroups.append(newgroup) def newActionGlobal(self, name, start, end, pid=-1, color=''): # which phase is this device callback or action in + phases = self.sortedPhases() targetphase = 'none' htmlclass = '' overlap = 0.0 - phases = [] - for phase in self.phases: + myphases = [] + for phase in phases: pstart = self.dmesg[phase]['start'] pend = self.dmesg[phase]['end'] # see if the action overlaps this phase o = max(0, min(end, pend) - max(start, pstart)) if o > 0: - phases.append(phase) + myphases.append(phase) # set the target phase to the one that overlaps most if o > overlap: if overlap > 0 and phase == 'post_resume': @@ -1267,19 +1335,19 @@ class Data: overlap = o # if no target phase was found, pin it to the edge if targetphase == 'none': - p0start = self.dmesg[self.phases[0]]['start'] + p0start = self.dmesg[phases[0]]['start'] if start <= p0start: - targetphase = self.phases[0] + targetphase = phases[0] else: - targetphase = self.phases[-1] + targetphase = phases[-1] if pid == -2: htmlclass = ' bg' elif pid == -3: htmlclass = ' ps' - if len(phases) > 1: + if len(myphases) > 1: htmlclass = ' bg' - self.phaseOverlap(phases) - if targetphase in self.phases: + self.phaseOverlap(myphases) + if targetphase in phases: newname = self.newAction(targetphase, name, pid, '', start, end, '', htmlclass, color) return (targetphase, newname) return False @@ -1315,7 +1383,7 @@ class Data: sysvals.vprint('Timeline Details:') sysvals.vprint(' test start: %f' % self.start) sysvals.vprint('kernel suspend start: %f' % self.tKernSus) - for phase in self.phases: + for phase in self.sortedPhases(): dc = len(self.dmesg[phase]['list']) sysvals.vprint(' %16s: %f - %f (%d devices)' % (phase, \ self.dmesg[phase]['start'], self.dmesg[phase]['end'], dc)) @@ -1323,7 +1391,7 @@ class Data: sysvals.vprint(' test end: %f' % self.end) def deviceChildrenAllPhases(self, devname): devlist = [] - for phase in self.phases: + for phase in self.sortedPhases(): list = self.deviceChildren(devname, phase) for dev in list: if dev not in devlist: @@ -1344,7 +1412,7 @@ class Data: if node.name: info = '' drv = '' - for phase in self.phases: + for phase in self.sortedPhases(): list = self.dmesg[phase]['list'] if node.name in list: s = list[node.name]['start'] @@ -1478,8 +1546,29 @@ class Data: c = self.addProcessUsageEvent(ps, tres) if c > 0: sysvals.vprint('%25s (res): %d' % (ps, c)) + def handleEndMarker(self, time): + dm = self.dmesg + self.setEnd(time) + self.initDevicegroups() + # give suspend_prepare an end if needed + if 'suspend_prepare' in dm and dm['suspend_prepare']['end'] < 0: + dm['suspend_prepare']['end'] = time + # assume resume machine ends at next phase start + if 'resume_machine' in dm and dm['resume_machine']['end'] < 0: + np = self.nextPhase('resume_machine', 1) + if np: + dm['resume_machine']['end'] = dm[np]['start'] + # if kernel resume end not found, assume its the end marker + if self.tKernRes == 0.0: + self.tKernRes = time + # if kernel suspend start not found, assume its the end marker + if self.tKernSus == 0.0: + self.tKernSus = time + # set resume complete to end at end marker + if 'resume_complete' in dm: + dm['resume_complete']['end'] = time def debugPrint(self): - for p in self.phases: + for p in self.sortedPhases(): list = self.dmesg[p]['list'] for devname in list: dev = list[devname] @@ -1490,9 +1579,9 @@ class Data: # Description: # A container for kprobe function data we want in the dev timeline class DevFunction: - row = 0 - count = 1 def __init__(self, name, args, caller, ret, start, end, u, proc, pid, color): + self.row = 0 + self.count = 1 self.name = name self.args = args self.caller = caller @@ -1546,16 +1635,15 @@ class DevFunction: # suspend_resume: phase or custom exec block data # device_pm_callback: device callback info class FTraceLine: - time = 0.0 - length = 0.0 - fcall = False - freturn = False - fevent = False - fkprobe = False - depth = 0 - name = '' - type = '' def __init__(self, t, m='', d=''): + self.length = 0.0 + self.fcall = False + self.freturn = False + self.fevent = False + self.fkprobe = False + self.depth = 0 + self.name = '' + self.type = '' self.time = float(t) if not m and not d: return @@ -1675,19 +1763,13 @@ class FTraceLine: # Each instance is tied to a single device in a single phase, and is # comprised of an ordered list of FTraceLine objects class FTraceCallGraph: - id = '' - start = -1.0 - end = -1.0 - list = [] - invalid = False - depth = 0 - pid = 0 - name = '' - partial = False vfname = 'missing_function_name' - ignore = False - sv = 0 def __init__(self, pid, sv): + self.id = '' + self.invalid = False + self.name = '' + self.partial = False + self.ignore = False self.start = -1.0 self.end = -1.0 self.list = [] @@ -1943,7 +2025,7 @@ class FTraceCallGraph: dev['ftrace'] = cg found = devname return found - for p in data.phases: + for p in data.sortedPhases(): if(data.dmesg[p]['start'] <= self.start and self.start <= data.dmesg[p]['end']): list = data.dmesg[p]['list'] @@ -1966,7 +2048,7 @@ class FTraceCallGraph: if fs < data.start or fe > data.end: return phase = '' - for p in data.phases: + for p in data.sortedPhases(): if(data.dmesg[p]['start'] <= self.start and self.start < data.dmesg[p]['end']): phase = p @@ -2008,23 +2090,20 @@ class DevItem: # A container for a device timeline which calculates # all the html properties to display it correctly class Timeline: - html = '' - height = 0 # total timeline height - scaleH = 20 # timescale (top) row height - rowH = 30 # device row height - bodyH = 0 # body height - rows = 0 # total timeline rows - rowlines = dict() - rowheight = dict() html_tblock = '
\n' html_device = '
{6}
\n' html_phase = '
{5}
\n' html_phaselet = '
\n' html_legend = '
 {2}
\n' def __init__(self, rowheight, scaleheight): - self.rowH = rowheight - self.scaleH = scaleheight self.html = '' + self.height = 0 # total timeline height + self.scaleH = scaleheight # timescale (top) row height + self.rowH = rowheight # device row height + self.bodyH = 0 # body height + self.rows = 0 # total timeline rows + self.rowlines = dict() + self.rowheight = dict() def createHeader(self, sv, stamp): if(not stamp['time']): return @@ -2251,18 +2330,18 @@ class Timeline: # Description: # A list of values describing the properties of these test runs class TestProps: - stamp = '' - sysinfo = '' - cmdline = '' - kparams = '' - S0i3 = False - fwdata = [] stampfmt = '# [a-z]*-(?P[0-9]{2})(?P[0-9]{2})(?P[0-9]{2})-'+\ '(?P[0-9]{2})(?P[0-9]{2})(?P[0-9]{2})'+\ ' (?P.*) (?P.*) (?P.*)$' + batteryfmt = '^# battery (?P\w*) (?P\d*) (?P\w*) (?P\d*)' + testerrfmt = '^# enter_sleep_error (?P.*)' sysinfofmt = '^# sysinfo .*' cmdlinefmt = '^# command \| (?P.*)' kparamsfmt = '^# kparams \| (?P.*)' + devpropfmt = '# Device Properties: .*' + tracertypefmt = '# tracer: (?P.*)' + firmwarefmt = '# fwsuspend (?P[0-9]*) fwresume (?P[0-9]*)$' + procexecfmt = 'ps - (?P.*)$' ftrace_line_fmt_fg = \ '^ *(?P