From 1f08e84ff642294e42d138442a388989ffb20865 Mon Sep 17 00:00:00 2001 From: Igor Perminov Date: Tue, 22 Sep 2009 00:25:44 +0400 Subject: mac80211: Fix [re]association power saving issue on AP side Consider the following step-by step: 1. A STA authenticates and associates with the AP and exchanges traffic. 2. The STA reports to the AP that it is going to PS state. 3. Some time later the STA device goes to the stand-by mode (not only its wi-fi card, but the device itself) and drops the association state without sending a disassociation frame. 4. The STA device wakes up and begins authentication with an Auth frame as it hasn't been authenticated/associated previously. At the step 4 the AP "remembers" the STA and considers it is still in the PS state, so the AP buffers frames, which it has to send to the STA. But the STA isn't actually in the PS state and so it neither checks TIM bits nor reports to the AP that it isn't power saving. Because of that authentication/[re]association fails. To fix authentication/[re]association stage of this issue, Auth, Assoc Resp and Reassoc Resp frames are transmitted disregarding of STA's power saving state. N.B. This patch doesn't fix further data frame exchange after authentication/[re]association. A patch in hostapd is required to fix that. Signed-off-by: Igor Perminov Signed-off-by: John W. Linville --- net/mac80211/tx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'net') diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 5143d203256b..fd4028296613 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -367,7 +367,10 @@ ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; u32 staflags; - if (unlikely(!sta || ieee80211_is_probe_resp(hdr->frame_control))) + if (unlikely(!sta || ieee80211_is_probe_resp(hdr->frame_control) + || ieee80211_is_auth(hdr->frame_control) + || ieee80211_is_assoc_resp(hdr->frame_control) + || ieee80211_is_reassoc_resp(hdr->frame_control))) return TX_CONTINUE; staflags = get_sta_flags(sta); -- cgit v1.2.3 From 417bc4b855f04dd4ad27a7cabe3e7996a7b78ddb Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 1 Oct 2009 09:29:45 -0700 Subject: pktgen: Fix delay handling After last pktgen changes, delay handling is wrong. pktgen actually sends packets at full line speed. Fix is to update pkt_dev->next_tx even if spin() returns early, so that next spin() calls have a chance to see a positive delay. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/pktgen.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'net') diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 4d11c28ca8ca..b69455217ed6 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -2105,15 +2105,17 @@ static void pktgen_setup_inject(struct pktgen_dev *pkt_dev) static void spin(struct pktgen_dev *pkt_dev, ktime_t spin_until) { ktime_t start_time, end_time; - s32 remaining; + s64 remaining; struct hrtimer_sleeper t; hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS); hrtimer_set_expires(&t.timer, spin_until); remaining = ktime_to_us(hrtimer_expires_remaining(&t.timer)); - if (remaining <= 0) + if (remaining <= 0) { + pkt_dev->next_tx = ktime_add_ns(spin_until, pkt_dev->delay); return; + } start_time = ktime_now(); if (remaining < 100) -- cgit v1.2.3 From 4fdb78d3093a347456e108b77d56d493d29071b2 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 1 Oct 2009 15:02:20 -0700 Subject: net/ipv4/tcp.c: fix min() type mismatch warning net/ipv4/tcp.c: In function 'do_tcp_setsockopt': net/ipv4/tcp.c:2050: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net') diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 5a15e7629d8e..7bb8479b1eaf 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2047,7 +2047,7 @@ static int do_tcp_setsockopt(struct sock *sk, int level, return -EINVAL; val = strncpy_from_user(name, optval, - min(TCP_CA_NAME_MAX-1, optlen)); + min_t(long, TCP_CA_NAME_MAX-1, optlen)); if (val < 0) return -EFAULT; name[val] = 0; -- cgit v1.2.3 From 89e95a613c8a045ce0c5b992ba19f10613f6ab2f Mon Sep 17 00:00:00 2001 From: Ori Finkelman Date: Thu, 1 Oct 2009 06:41:59 +0000 Subject: IPv4 TCP fails to send window scale option when window scale is zero Acknowledge TCP window scale support by inserting the proper option in SYN/ACK and SYN headers even if our window scale is zero. This fixes the following observed behavior: 1. Client sends a SYN with TCP window scaling option and non zero window scale value to a Linux box. 2. Linux box notes large receive window from client. 3. Linux decides on a zero value of window scale for its part. 4. Due to compare against requested window scale size option, Linux does not to send windows scale TCP option header on SYN/ACK at all. With the following result: Client box thinks TCP window scaling is not supported, since SYN/ACK had no TCP window scale option, while Linux thinks that TCP window scaling is supported (and scale might be non zero), since SYN had TCP window scale option and we have a mismatched idea between the client and server regarding window sizes. Probably it also fixes up the following bug (not observed in practice): 1. Linux box opens TCP connection to some server. 2. Linux decides on zero value of window scale. 3. Due to compare against computed window scale size option, Linux does not to set windows scale TCP option header on SYN. With the expected result that the server OS does not use window scale option due to not receiving such an option in the SYN headers, leading to suboptimal performance. Signed-off-by: Gilad Ben-Yossef Signed-off-by: Ori Finkelman Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'net') diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 5200aab0ca97..fcd278a7080e 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -361,6 +361,7 @@ static inline int tcp_urg_mode(const struct tcp_sock *tp) #define OPTION_SACK_ADVERTISE (1 << 0) #define OPTION_TS (1 << 1) #define OPTION_MD5 (1 << 2) +#define OPTION_WSCALE (1 << 3) struct tcp_out_options { u8 options; /* bit field of OPTION_* */ @@ -427,7 +428,7 @@ static void tcp_options_write(__be32 *ptr, struct tcp_sock *tp, TCPOLEN_SACK_PERM); } - if (unlikely(opts->ws)) { + if (unlikely(OPTION_WSCALE & opts->options)) { *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_WINDOW << 16) | (TCPOLEN_WINDOW << 8) | @@ -494,8 +495,8 @@ static unsigned tcp_syn_options(struct sock *sk, struct sk_buff *skb, } if (likely(sysctl_tcp_window_scaling)) { opts->ws = tp->rx_opt.rcv_wscale; - if (likely(opts->ws)) - size += TCPOLEN_WSCALE_ALIGNED; + opts->options |= OPTION_WSCALE; + size += TCPOLEN_WSCALE_ALIGNED; } if (likely(sysctl_tcp_sack)) { opts->options |= OPTION_SACK_ADVERTISE; @@ -537,8 +538,8 @@ static unsigned tcp_synack_options(struct sock *sk, if (likely(ireq->wscale_ok)) { opts->ws = ireq->rcv_wscale; - if (likely(opts->ws)) - size += TCPOLEN_WSCALE_ALIGNED; + opts->options |= OPTION_WSCALE; + size += TCPOLEN_WSCALE_ALIGNED; } if (likely(doing_ts)) { opts->options |= OPTION_TS; -- cgit v1.2.3 From 914a9ab386a288d0f22252fc268ecbc048cdcbd5 Mon Sep 17 00:00:00 2001 From: Atis Elsts Date: Thu, 1 Oct 2009 15:16:49 -0700 Subject: net: Use sk_mark for routing lookup in more places This patch against v2.6.31 adds support for route lookup using sk_mark in some more places. The benefits from this patch are the following. First, SO_MARK option now has effect on UDP sockets too. Second, ip_queue_xmit() and inet_sk_rebuild_header() could fail to do routing lookup correctly if TCP sockets with SO_MARK were used. Signed-off-by: Atis Elsts Acked-by: Eric Dumazet --- net/ipv4/af_inet.c | 1 + net/ipv4/ip_output.c | 1 + net/ipv4/udp.c | 1 + 3 files changed, 3 insertions(+) (limited to 'net') diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 58c4b0f7c4aa..57737b8d1711 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -1119,6 +1119,7 @@ int inet_sk_rebuild_header(struct sock *sk) { struct flowi fl = { .oif = sk->sk_bound_dev_if, + .mark = sk->sk_mark, .nl_u = { .ip4_u = { .daddr = daddr, diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 9fe5d7b81580..f9895180f481 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -335,6 +335,7 @@ int ip_queue_xmit(struct sk_buff *skb, int ipfragok) { struct flowi fl = { .oif = sk->sk_bound_dev_if, + .mark = sk->sk_mark, .nl_u = { .ip4_u = { .daddr = daddr, .saddr = inet->saddr, diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 3326aff65906..6ec6a8a4a224 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -696,6 +696,7 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, if (rt == NULL) { struct flowi fl = { .oif = ipc.oif, + .mark = sk->sk_mark, .nl_u = { .ip4_u = { .daddr = faddr, .saddr = saddr, -- cgit v1.2.3 From 42324c62704365d6a3e89138dea55909d2f26afe Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 1 Oct 2009 15:26:00 -0700 Subject: net: splice() from tcp to pipe should take into account O_NONBLOCK tcp_splice_read() doesnt take into account socket's O_NONBLOCK flag Before this patch : splice(socket,0,pipe,0,128*1024,SPLICE_F_MOVE); causes a random endless block (if pipe is full) and splice(socket,0,pipe,0,128*1024,SPLICE_F_MOVE | SPLICE_F_NONBLOCK); will return 0 immediately if the TCP buffer is empty. User application has no way to instruct splice() that socket should be in blocking mode but pipe in nonblock more. Many projects cannot use splice(tcp -> pipe) because of this flaw. http://git.samba.org/?p=samba.git;a=history;f=source3/lib/recvfile.c;h=ea0159642137390a0f7e57a123684e6e63e47581;hb=HEAD http://lkml.indiana.edu/hypermail/linux/kernel/0807.2/0687.html Linus introduced SPLICE_F_NONBLOCK in commit 29e350944fdc2dfca102500790d8ad6d6ff4f69d (splice: add SPLICE_F_NONBLOCK flag ) It doesn't make the splice itself necessarily nonblocking (because the actual file descriptors that are spliced from/to may block unless they have the O_NONBLOCK flag set), but it makes the splice pipe operations nonblocking. Linus intention was clear : let SPLICE_F_NONBLOCK control the splice pipe mode only This patch instruct tcp_splice_read() to use the underlying file O_NONBLOCK flag, as other socket operations do. Users will then call : splice(socket,0,pipe,0,128*1024,SPLICE_F_MOVE | SPLICE_F_NONBLOCK ); to block on data coming from socket (if file is in blocking mode), and not block on pipe output (to avoid deadlock) First version of this patch was submitted by Octavian Purdila Reported-by: Volker Lendecke Reported-by: Jason Gunthorpe Signed-off-by: Eric Dumazet Signed-off-by: Octavian Purdila Acked-by: Linus Torvalds Acked-by: Jens Axboe Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net') diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 7bb8479b1eaf..64d0af675823 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -580,7 +580,7 @@ ssize_t tcp_splice_read(struct socket *sock, loff_t *ppos, lock_sock(sk); - timeo = sock_rcvtimeo(sk, flags & SPLICE_F_NONBLOCK); + timeo = sock_rcvtimeo(sk, sock->file->f_flags & O_NONBLOCK); while (tss.len) { ret = __tcp_splice_read(sk, &tss); if (ret < 0) -- cgit v1.2.3