From 784656f9c680d334e7b4cdb6951c5c913e5a26bf Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 12 Jul 2011 11:15:55 +0200 Subject: memblock: Reimplement memblock_add_region() memblock_add_region() carefully checked for merge and overlap conditions while adding a new region, which is complicated and makes it difficult to allow arbitrary overlaps or add more merge conditions (e.g. node ID). This re-implements memblock_add_region() such that insertion is done in two steps - all non-overlapping portions of new area are inserted as separate regions first and then memblock_merge_regions() scan and merge all neighbouring compatible regions. This makes addition logic simpler and more versatile and enables adding node information to memblock. Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/r/1310462166-31469-3-git-send-email-tj@kernel.org Cc: Yinghai Lu Cc: Benjamin Herrenschmidt Signed-off-by: H. Peter Anvin --- mm/memblock.c | 195 +++++++++++++++++++++++++++++++++------------------------- 1 file changed, 110 insertions(+), 85 deletions(-) (limited to 'mm/memblock.c') diff --git a/mm/memblock.c b/mm/memblock.c index bd3a3a9591d4..992aa1807473 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -251,117 +251,142 @@ static int __init_memblock memblock_double_array(struct memblock_type *type) return 0; } -static long __init_memblock memblock_add_region(struct memblock_type *type, - phys_addr_t base, phys_addr_t size) +/** + * memblock_merge_regions - merge neighboring compatible regions + * @type: memblock type to scan + * + * Scan @type and merge neighboring compatible regions. + */ +static void __init_memblock memblock_merge_regions(struct memblock_type *type) { - phys_addr_t end = base + size; - int i, slot = -1; + int i = 0; - /* First try and coalesce this MEMBLOCK with others */ - for (i = 0; i < type->cnt; i++) { - struct memblock_region *rgn = &type->regions[i]; - phys_addr_t rend = rgn->base + rgn->size; + /* cnt never goes below 1 */ + while (i < type->cnt - 1) { + struct memblock_region *this = &type->regions[i]; + struct memblock_region *next = &type->regions[i + 1]; - /* Exit if there's no possible hits */ - if (rgn->base > end || rgn->size == 0) - break; - - /* Check if we are fully enclosed within an existing - * block - */ - if (rgn->base <= base && rend >= end) - return 0; + if (this->base + this->size != next->base) { + BUG_ON(this->base + this->size > next->base); + i++; + continue; + } - /* Check if we overlap or are adjacent with the bottom - * of a block. - */ - if (base < rgn->base && end >= rgn->base) { - /* We extend the bottom of the block down to our - * base - */ - rgn->base = base; - rgn->size = rend - base; + this->size += next->size; + memmove(next, next + 1, (type->cnt - (i + 1)) * sizeof(*next)); + type->cnt--; + } +} - /* Return if we have nothing else to allocate - * (fully coalesced) - */ - if (rend >= end) - return 0; +/** + * memblock_insert_region - insert new memblock region + * @type: memblock type to insert into + * @idx: index for the insertion point + * @base: base address of the new region + * @size: size of the new region + * + * Insert new memblock region [@base,@base+@size) into @type at @idx. + * @type must already have extra room to accomodate the new region. + */ +static void __init_memblock memblock_insert_region(struct memblock_type *type, + int idx, phys_addr_t base, + phys_addr_t size) +{ + struct memblock_region *rgn = &type->regions[idx]; - /* We continue processing from the end of the - * coalesced block. - */ - base = rend; - size = end - base; - } + BUG_ON(type->cnt >= type->max); + memmove(rgn + 1, rgn, (type->cnt - idx) * sizeof(*rgn)); + rgn->base = base; + rgn->size = size; + type->cnt++; +} - /* Now check if we overlap or are adjacent with the - * top of a block - */ - if (base <= rend && end >= rend) { - /* We adjust our base down to enclose the - * original block and destroy it. It will be - * part of our new allocation. Since we've - * freed an entry, we know we won't fail - * to allocate one later, so we won't risk - * losing the original block allocation. - */ - size += (base - rgn->base); - base = rgn->base; - memblock_remove_region(type, i--); - } - } +/** + * memblock_add_region - add new memblock region + * @type: memblock type to add new region into + * @base: base address of the new region + * @size: size of the new region + * + * Add new memblock region [@base,@base+@size) into @type. The new region + * is allowed to overlap with existing ones - overlaps don't affect already + * existing regions. @type is guaranteed to be minimal (all neighbouring + * compatible regions are merged) after the addition. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static long __init_memblock memblock_add_region(struct memblock_type *type, + phys_addr_t base, phys_addr_t size) +{ + bool insert = false; + phys_addr_t obase = base, end = base + size; + int i, nr_new; - /* If the array is empty, special case, replace the fake - * filler region and return - */ - if ((type->cnt == 1) && (type->regions[0].size == 0)) { + /* special case for empty array */ + if (type->regions[0].size == 0) { + WARN_ON(type->cnt != 1); type->regions[0].base = base; type->regions[0].size = size; return 0; } - - /* If we are out of space, we fail. It's too late to resize the array - * but then this shouldn't have happened in the first place. +repeat: + /* + * The following is executed twice. Once with %false @insert and + * then with %true. The first counts the number of regions needed + * to accomodate the new area. The second actually inserts them. */ - if (WARN_ON(type->cnt >= type->max)) - return -1; + base = obase; + nr_new = 0; + + for (i = 0; i < type->cnt; i++) { + struct memblock_region *rgn = &type->regions[i]; + phys_addr_t rbase = rgn->base; + phys_addr_t rend = rbase + rgn->size; - /* Couldn't coalesce the MEMBLOCK, so add it to the sorted table. */ - for (i = type->cnt - 1; i >= 0; i--) { - if (base < type->regions[i].base) { - type->regions[i+1].base = type->regions[i].base; - type->regions[i+1].size = type->regions[i].size; - } else { - type->regions[i+1].base = base; - type->regions[i+1].size = size; - slot = i + 1; + if (rbase >= end) break; + if (rend <= base) + continue; + /* + * @rgn overlaps. If it separates the lower part of new + * area, insert that portion. + */ + if (rbase > base) { + nr_new++; + if (insert) + memblock_insert_region(type, i++, base, + rbase - base); } + /* area below @rend is dealt with, forget about it */ + base = min(rend, end); } - if (base < type->regions[0].base) { - type->regions[0].base = base; - type->regions[0].size = size; - slot = 0; + + /* insert the remaining portion */ + if (base < end) { + nr_new++; + if (insert) + memblock_insert_region(type, i, base, end - base); } - type->cnt++; - /* The array is full ? Try to resize it. If that fails, we undo - * our allocation and return an error + /* + * If this was the first round, resize array and repeat for actual + * insertions; otherwise, merge and return. */ - if (type->cnt == type->max && memblock_double_array(type)) { - BUG_ON(slot < 0); - memblock_remove_region(type, slot); - return -1; + if (!insert) { + while (type->cnt + nr_new > type->max) + if (memblock_double_array(type) < 0) + return -ENOMEM; + insert = true; + goto repeat; + } else { + memblock_merge_regions(type); + return 0; } - - return 0; } long __init_memblock memblock_add(phys_addr_t base, phys_addr_t size) { return memblock_add_region(&memblock.memory, base, size); - } static long __init_memblock __memblock_remove(struct memblock_type *type, -- cgit v1.2.3