From c5a89c6c0805959f813e8342d6f4040860f6d7db Mon Sep 17 00:00:00 2001 From: Marc Pignat Date: Fri, 30 May 2008 14:07:47 +0200 Subject: mmc: at91_mci: avoid timeouts The at91 mci controller internal state machine seems to often crash. This can be fixed by resetting the controller after each command for at91rm9200 and by setting the MCI_BLKR register on at91sam926*. Signed-off-by: Marc Pignat Signed-off-by: Hans J Koch Signed-off-by: Nicolas Ferre Signed-off-by: Pierre Ossman --- include/asm-arm/arch-at91/at91_mci.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/asm-arm') diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h index 1551fc24eb43..400ec10014b4 100644 --- a/include/asm-arm/arch-at91/at91_mci.h +++ b/include/asm-arm/arch-at91/at91_mci.h @@ -75,6 +75,10 @@ #define AT91_MCI_TRTYP_MULTIPLE (1 << 19) #define AT91_MCI_TRTYP_STREAM (2 << 19) +#define AT91_MCI_BLKR 0x18 /* Block Register */ +#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */ +#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block lenght */ + #define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */ #define AT91_MCR_RDR 0x30 /* Receive Data Register */ #define AT91_MCR_TDR 0x34 /* Transmit Data Register */ -- cgit v1.2.3 From be518018c6b9224c02284fb243207ef741c31ec6 Mon Sep 17 00:00:00 2001 From: Thomas Kleffel Date: Mon, 30 Jun 2008 22:40:24 +0100 Subject: MMC: S3C24XX MMC/SD driver. This is the latest S3C MMC/SD driver by Thomas Kleffel with cleanups as suggested by AKPM done by Ben Dooks. Signed-off-by: Ben Dooks Signed-off-by: Thomas Kleffel Signed-off-by: Pierre Ossman --- drivers/mmc/host/Kconfig | 11 + drivers/mmc/host/Makefile | 2 +- drivers/mmc/host/s3cmci.c | 1343 +++++++++++++++++++++++++++++++ drivers/mmc/host/s3cmci.h | 69 ++ include/asm-arm/arch-s3c2410/regs-sdi.h | 20 +- 5 files changed, 1441 insertions(+), 4 deletions(-) create mode 100644 drivers/mmc/host/s3cmci.c create mode 100644 drivers/mmc/host/s3cmci.h (limited to 'include/asm-arm') diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index f9cbcb891e99..dc88c03662ab 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -143,3 +143,14 @@ config MMC_SPI If unsure, or if your system has no SPI master driver, say N. +config MMC_S3C + tristate "Samsung S3C SD/MMC Card Interface support" + depends on ARCH_S3C2410 && MMC + help + This selects a driver for the MCI interface found in + Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. + If you have a board based on one of those and a MMC/SD + slot, say Y or M here. + + If unsure, say N. + diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 3027250b8555..b3e023bf8c78 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -18,4 +18,4 @@ obj-$(CONFIG_MMC_OMAP) += omap.o obj-$(CONFIG_MMC_AT91) += at91_mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o - +obj-$(CONFIG_MMC_S3C) += s3cmci.o diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c new file mode 100644 index 000000000000..c6a4d3cadf2b --- /dev/null +++ b/drivers/mmc/host/s3cmci.c @@ -0,0 +1,1343 @@ +/* + * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver + * + * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include "s3cmci.h" + +#define DRIVER_NAME "s3c-mci" + +enum dbg_channels { + dbg_err = (1 << 0), + dbg_debug = (1 << 1), + dbg_info = (1 << 2), + dbg_irq = (1 << 3), + dbg_sg = (1 << 4), + dbg_dma = (1 << 5), + dbg_pio = (1 << 6), + dbg_fail = (1 << 7), + dbg_conf = (1 << 8), +}; + +static const int dbgmap_err = dbg_err | dbg_fail; +static const int dbgmap_info = dbg_info | dbg_conf; +static const int dbgmap_debug = dbg_debug; + +#define dbg(host, channels, args...) \ + do { \ + if (dbgmap_err & channels) \ + dev_err(&host->pdev->dev, args); \ + else if (dbgmap_info & channels) \ + dev_info(&host->pdev->dev, args); \ + else if (dbgmap_debug & channels) \ + dev_dbg(&host->pdev->dev, args); \ + } while (0) + +#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1) + +static struct s3c2410_dma_client s3cmci_dma_client = { + .name = "s3c-mci", +}; + +static void finalize_request(struct s3cmci_host *host); +static void s3cmci_send_request(struct mmc_host *mmc); +static void s3cmci_reset(struct s3cmci_host *host); + +#ifdef CONFIG_MMC_DEBUG + +static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) +{ + u32 con, pre, cmdarg, cmdcon, cmdsta, r0, r1, r2, r3, timer, bsize; + u32 datcon, datcnt, datsta, fsta, imask; + + con = readl(host->base + S3C2410_SDICON); + pre = readl(host->base + S3C2410_SDIPRE); + cmdarg = readl(host->base + S3C2410_SDICMDARG); + cmdcon = readl(host->base + S3C2410_SDICMDCON); + cmdsta = readl(host->base + S3C2410_SDICMDSTAT); + r0 = readl(host->base + S3C2410_SDIRSP0); + r1 = readl(host->base + S3C2410_SDIRSP1); + r2 = readl(host->base + S3C2410_SDIRSP2); + r3 = readl(host->base + S3C2410_SDIRSP3); + timer = readl(host->base + S3C2410_SDITIMER); + bsize = readl(host->base + S3C2410_SDIBSIZE); + datcon = readl(host->base + S3C2410_SDIDCON); + datcnt = readl(host->base + S3C2410_SDIDCNT); + datsta = readl(host->base + S3C2410_SDIDSTA); + fsta = readl(host->base + S3C2410_SDIFSTA); + imask = readl(host->base + host->sdiimsk); + + dbg(host, dbg_debug, "%s CON:[%08x] PRE:[%08x] TMR:[%08x]\n", + prefix, con, pre, timer); + + dbg(host, dbg_debug, "%s CCON:[%08x] CARG:[%08x] CSTA:[%08x]\n", + prefix, cmdcon, cmdarg, cmdsta); + + dbg(host, dbg_debug, "%s DCON:[%08x] FSTA:[%08x]" + " DSTA:[%08x] DCNT:[%08x]\n", + prefix, datcon, fsta, datsta, datcnt); + + dbg(host, dbg_debug, "%s R0:[%08x] R1:[%08x]" + " R2:[%08x] R3:[%08x]\n", + prefix, r0, r1, r2, r3); +} + +static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd, + int stop) +{ + snprintf(host->dbgmsg_cmd, 300, + "#%u%s op:%i arg:0x%08x flags:0x08%x retries:%u", + host->ccnt, (stop ? " (STOP)" : ""), + cmd->opcode, cmd->arg, cmd->flags, cmd->retries); + + if (cmd->data) { + snprintf(host->dbgmsg_dat, 300, + "#%u bsize:%u blocks:%u bytes:%u", + host->dcnt, cmd->data->blksz, + cmd->data->blocks, + cmd->data->blocks * cmd->data->blksz); + } else { + host->dbgmsg_dat[0] = '\0'; + } +} + +static void dbg_dumpcmd(struct s3cmci_host *host, struct mmc_command *cmd, + int fail) +{ + unsigned int dbglvl = fail ? dbg_fail : dbg_debug; + + if (!cmd) + return; + + if (cmd->error == 0) { + dbg(host, dbglvl, "CMD[OK] %s R0:0x%08x\n", + host->dbgmsg_cmd, cmd->resp[0]); + } else { + dbg(host, dbglvl, "CMD[ERR %i] %s Status:%s\n", + cmd->error, host->dbgmsg_cmd, host->status); + } + + if (!cmd->data) + return; + + if (cmd->data->error == 0) { + dbg(host, dbglvl, "DAT[OK] %s\n", host->dbgmsg_dat); + } else { + dbg(host, dbglvl, "DAT[ERR %i] %s DCNT:0x%08x\n", + cmd->data->error, host->dbgmsg_dat, + readl(host->base + S3C2410_SDIDCNT)); + } +} +#else +static void dbg_dumpcmd(struct s3cmci_host *host, + struct mmc_command *cmd, int fail) { } + +static void prepare_dbgmsg(struct s3cmci_host *host, struct mmc_command *cmd, + int stop) { } + +static void dbg_dumpregs(struct s3cmci_host *host, char *prefix) { } + +#endif /* CONFIG_MMC_DEBUG */ + +static inline u32 enable_imask(struct s3cmci_host *host, u32 imask) +{ + u32 newmask; + + newmask = readl(host->base + host->sdiimsk); + newmask |= imask; + + writel(newmask, host->base + host->sdiimsk); + + return newmask; +} + +static inline u32 disable_imask(struct s3cmci_host *host, u32 imask) +{ + u32 newmask; + + newmask = readl(host->base + host->sdiimsk); + newmask &= ~imask; + + writel(newmask, host->base + host->sdiimsk); + + return newmask; +} + +static inline void clear_imask(struct s3cmci_host *host) +{ + writel(0, host->base + host->sdiimsk); +} + +static inline int get_data_buffer(struct s3cmci_host *host, + u32 *words, u32 **pointer) +{ + struct scatterlist *sg; + + if (host->pio_active == XFER_NONE) + return -EINVAL; + + if ((!host->mrq) || (!host->mrq->data)) + return -EINVAL; + + if (host->pio_sgptr >= host->mrq->data->sg_len) { + dbg(host, dbg_debug, "no more buffers (%i/%i)\n", + host->pio_sgptr, host->mrq->data->sg_len); + return -EBUSY; + } + sg = &host->mrq->data->sg[host->pio_sgptr]; + + *words = sg->length >> 2; + *pointer = sg_virt(sg); + + host->pio_sgptr++; + + dbg(host, dbg_sg, "new buffer (%i/%i)\n", + host->pio_sgptr, host->mrq->data->sg_len); + + return 0; +} + +static inline u32 fifo_count(struct s3cmci_host *host) +{ + u32 fifostat = readl(host->base + S3C2410_SDIFSTA); + + fifostat &= S3C2410_SDIFSTA_COUNTMASK; + return fifostat >> 2; +} + +static inline u32 fifo_free(struct s3cmci_host *host) +{ + u32 fifostat = readl(host->base + S3C2410_SDIFSTA); + + fifostat &= S3C2410_SDIFSTA_COUNTMASK; + return (63 - fifostat) >> 2; +} + +static void do_pio_read(struct s3cmci_host *host) +{ + int res; + u32 fifo; + void __iomem *from_ptr; + + /* write real prescaler to host, it might be set slow to fix */ + writel(host->prescaler, host->base + S3C2410_SDIPRE); + + from_ptr = host->base + host->sdidata; + + while ((fifo = fifo_count(host))) { + if (!host->pio_words) { + res = get_data_buffer(host, &host->pio_words, + &host->pio_ptr); + if (res) { + host->pio_active = XFER_NONE; + host->complete_what = COMPLETION_FINALIZE; + + dbg(host, dbg_pio, "pio_read(): " + "complete (no more data).\n"); + return; + } + + dbg(host, dbg_pio, + "pio_read(): new target: [%i]@[%p]\n", + host->pio_words, host->pio_ptr); + } + + dbg(host, dbg_pio, + "pio_read(): fifo:[%02i] buffer:[%03i] dcnt:[%08X]\n", + fifo, host->pio_words, + readl(host->base + S3C2410_SDIDCNT)); + + if (fifo > host->pio_words) + fifo = host->pio_words; + + host->pio_words -= fifo; + host->pio_count += fifo; + + while (fifo--) + *(host->pio_ptr++) = readl(from_ptr); + } + + if (!host->pio_words) { + res = get_data_buffer(host, &host->pio_words, &host->pio_ptr); + if (res) { + dbg(host, dbg_pio, + "pio_read(): complete (no more buffers).\n"); + host->pio_active = XFER_NONE; + host->complete_what = COMPLETION_FINALIZE; + + return; + } + } + + enable_imask(host, + S3C2410_SDIIMSK_RXFIFOHALF | S3C2410_SDIIMSK_RXFIFOLAST); +} + +static void do_pio_write(struct s3cmci_host *host) +{ + void __iomem *to_ptr; + int res; + u32 fifo; + + to_ptr = host->base + host->sdidata; + + while ((fifo = fifo_free(host))) { + if (!host->pio_words) { + res = get_data_buffer(host, &host->pio_words, + &host->pio_ptr); + if (res) { + dbg(host, dbg_pio, + "pio_write(): complete (no more data).\n"); + host->pio_active = XFER_NONE; + + return; + } + + dbg(host, dbg_pio, + "pio_write(): new source: [%i]@[%p]\n", + host->pio_words, host->pio_ptr); + + } + + if (fifo > host->pio_words) + fifo = host->pio_words; + + host->pio_words -= fifo; + host->pio_count += fifo; + + while (fifo--) + writel(*(host->pio_ptr++), to_ptr); + } + + enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); +} + +static void pio_tasklet(unsigned long data) +{ + struct s3cmci_host *host = (struct s3cmci_host *) data; + + + if (host->pio_active == XFER_WRITE) + do_pio_write(host); + + if (host->pio_active == XFER_READ) + do_pio_read(host); + + if (host->complete_what == COMPLETION_FINALIZE) { + clear_imask(host); + if (host->pio_active != XFER_NONE) { + dbg(host, dbg_err, "unfinished %s " + "- pio_count:[%u] pio_words:[%u]\n", + (host->pio_active == XFER_READ) ? "read" : "write", + host->pio_count, host->pio_words); + + host->mrq->data->error = -EINVAL; + } + + disable_irq(host->irq); + finalize_request(host); + } +} + +/* + * ISR for SDI Interface IRQ + * Communication between driver and ISR works as follows: + * host->mrq points to current request + * host->complete_what Indicates when the request is considered done + * COMPLETION_CMDSENT when the command was sent + * COMPLETION_RSPFIN when a response was received + * COMPLETION_XFERFINISH when the data transfer is finished + * COMPLETION_XFERFINISH_RSPFIN both of the above. + * host->complete_request is the completion-object the driver waits for + * + * 1) Driver sets up host->mrq and host->complete_what + * 2) Driver prepares the transfer + * 3) Driver enables interrupts + * 4) Driver starts transfer + * 5) Driver waits for host->complete_rquest + * 6) ISR checks for request status (errors and success) + * 6) ISR sets host->mrq->cmd->error and host->mrq->data->error + * 7) ISR completes host->complete_request + * 8) ISR disables interrupts + * 9) Driver wakes up and takes care of the request + * + * Note: "->error"-fields are expected to be set to 0 before the request + * was issued by mmc.c - therefore they are only set, when an error + * contition comes up + */ + +static irqreturn_t s3cmci_irq(int irq, void *dev_id) +{ + struct s3cmci_host *host = dev_id; + struct mmc_command *cmd; + u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk; + u32 mci_cclear, mci_dclear; + unsigned long iflags; + + spin_lock_irqsave(&host->complete_lock, iflags); + + mci_csta = readl(host->base + S3C2410_SDICMDSTAT); + mci_dsta = readl(host->base + S3C2410_SDIDSTA); + mci_dcnt = readl(host->base + S3C2410_SDIDCNT); + mci_fsta = readl(host->base + S3C2410_SDIFSTA); + mci_imsk = readl(host->base + host->sdiimsk); + mci_cclear = 0; + mci_dclear = 0; + + if ((host->complete_what == COMPLETION_NONE) || + (host->complete_what == COMPLETION_FINALIZE)) { + host->status = "nothing to complete"; + clear_imask(host); + goto irq_out; + } + + if (!host->mrq) { + host->status = "no active mrq"; + clear_imask(host); + goto irq_out; + } + + cmd = host->cmd_is_stop ? host->mrq->stop : host->mrq->cmd; + + if (!cmd) { + host->status = "no active cmd"; + clear_imask(host); + goto irq_out; + } + + if (!host->dodma) { + if ((host->pio_active == XFER_WRITE) && + (mci_fsta & S3C2410_SDIFSTA_TFDET)) { + + disable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); + tasklet_schedule(&host->pio_tasklet); + host->status = "pio tx"; + } + + if ((host->pio_active == XFER_READ) && + (mci_fsta & S3C2410_SDIFSTA_RFDET)) { + + disable_imask(host, + S3C2410_SDIIMSK_RXFIFOHALF | + S3C2410_SDIIMSK_RXFIFOLAST); + + tasklet_schedule(&host->pio_tasklet); + host->status = "pio rx"; + } + } + + if (mci_csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) { + cmd->error = -ETIMEDOUT; + host->status = "error: command timeout"; + goto fail_transfer; + } + + if (mci_csta & S3C2410_SDICMDSTAT_CMDSENT) { + if (host->complete_what == COMPLETION_CMDSENT) { + host->status = "ok: command sent"; + goto close_transfer; + } + + mci_cclear |= S3C2410_SDICMDSTAT_CMDSENT; + } + + if (mci_csta & S3C2410_SDICMDSTAT_CRCFAIL) { + if (cmd->flags & MMC_RSP_CRC) { + cmd->error = -EILSEQ; + host->status = "error: bad command crc"; + goto fail_transfer; + } + + mci_cclear |= S3C2410_SDICMDSTAT_CRCFAIL; + } + + if (mci_csta & S3C2410_SDICMDSTAT_RSPFIN) { + if (host->complete_what == COMPLETION_RSPFIN) { + host->status = "ok: command response received"; + goto close_transfer; + } + + if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) + host->complete_what = COMPLETION_XFERFINISH; + + mci_cclear |= S3C2410_SDICMDSTAT_RSPFIN; + } + + /* errors handled after this point are only relevant + when a data transfer is in progress */ + + if (!cmd->data) + goto clear_status_bits; + + /* Check for FIFO failure */ + if (host->is2440) { + if (mci_fsta & S3C2440_SDIFSTA_FIFOFAIL) { + host->mrq->data->error = -EILSEQ; + host->status = "error: 2440 fifo failure"; + goto fail_transfer; + } + } else { + if (mci_dsta & S3C2410_SDIDSTA_FIFOFAIL) { + cmd->data->error = -EILSEQ; + host->status = "error: fifo failure"; + goto fail_transfer; + } + } + + if (mci_dsta & S3C2410_SDIDSTA_RXCRCFAIL) { + cmd->data->error = -EILSEQ; + host->status = "error: bad data crc (outgoing)"; + goto fail_transfer; + } + + if (mci_dsta & S3C2410_SDIDSTA_CRCFAIL) { + cmd->data->error = -EILSEQ; + host->status = "error: bad data crc (incoming)"; + goto fail_transfer; + } + + if (mci_dsta & S3C2410_SDIDSTA_DATATIMEOUT) { + cmd->data->error = -ETIMEDOUT; + host->status = "error: data timeout"; + goto fail_transfer; + } + + if (mci_dsta & S3C2410_SDIDSTA_XFERFINISH) { + if (host->complete_what == COMPLETION_XFERFINISH) { + host->status = "ok: data transfer completed"; + goto close_transfer; + } + + if (host->complete_what == COMPLETION_XFERFINISH_RSPFIN) + host->complete_what = COMPLETION_RSPFIN; + + mci_dclear |= S3C2410_SDIDSTA_XFERFINISH; + } + +clear_status_bits: + writel(mci_cclear, host->base + S3C2410_SDICMDSTAT); + writel(mci_dclear, host->base + S3C2410_SDIDSTA); + + goto irq_out; + +fail_transfer: + host->pio_active = XFER_NONE; + +close_transfer: + host->complete_what = COMPLETION_FINALIZE; + + clear_imask(host); + tasklet_schedule(&host->pio_tasklet); + + goto irq_out; + +irq_out: + dbg(host, dbg_irq, + "csta:0x%08x dsta:0x%08x fsta:0x%08x dcnt:0x%08x status:%s.\n", + mci_csta, mci_dsta, mci_fsta, mci_dcnt, host->status); + + spin_unlock_irqrestore(&host->complete_lock, iflags); + return IRQ_HANDLED; + +} + +/* + * ISR for the CardDetect Pin +*/ + +static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id) +{ + struct s3cmci_host *host = (struct s3cmci_host *)dev_id; + + dbg(host, dbg_irq, "card detect\n"); + + mmc_detect_change(host->mmc, 500); + + return IRQ_HANDLED; +} + +void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, void *buf_id, + int size, enum s3c2410_dma_buffresult result) +{ + struct s3cmci_host *host = buf_id; + unsigned long iflags; + u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt; + + mci_csta = readl(host->base + S3C2410_SDICMDSTAT); + mci_dsta = readl(host->base + S3C2410_SDIDSTA); + mci_fsta = readl(host->base + S3C2410_SDIFSTA); + mci_dcnt = readl(host->base + S3C2410_SDIDCNT); + + BUG_ON(!host->mrq); + BUG_ON(!host->mrq->data); + BUG_ON(!host->dmatogo); + + spin_lock_irqsave(&host->complete_lock, iflags); + + if (result != S3C2410_RES_OK) { + dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x " + "fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n", + mci_csta, mci_dsta, mci_fsta, + mci_dcnt, result, host->dmatogo); + + goto fail_request; + } + + host->dmatogo--; + if (host->dmatogo) { + dbg(host, dbg_dma, "DMA DONE Size:%i DSTA:[%08x] " + "DCNT:[%08x] toGo:%u\n", + size, mci_dsta, mci_dcnt, host->dmatogo); + + goto out; + } + + dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n", + size, mci_dsta, mci_dcnt); + + host->complete_what = COMPLETION_FINALIZE; + +out: + tasklet_schedule(&host->pio_tasklet); + spin_unlock_irqrestore(&host->complete_lock, iflags); + return; + + +fail_request: + host->mrq->data->error = -EINVAL; + host->complete_what = COMPLETION_FINALIZE; + writel(0, host->base + host->sdiimsk); + goto out; + +} + +static void finalize_request(struct s3cmci_host *host) +{ + struct mmc_request *mrq = host->mrq; + struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd; + int debug_as_failure = 0; + + if (host->complete_what != COMPLETION_FINALIZE) + return; + + if (!mrq) + return; + + if (cmd->data && (cmd->error == 0) && + (cmd->data->error == 0)) { + if (host->dodma && (!host->dma_complete)) { + dbg(host, dbg_dma, "DMA Missing!\n"); + return; + } + } + + /* Read response from controller. */ + cmd->resp[0] = readl(host->base + S3C2410_SDIRSP0); + cmd->resp[1] = readl(host->base + S3C2410_SDIRSP1); + cmd->resp[2] = readl(host->base + S3C2410_SDIRSP2); + cmd->resp[3] = readl(host->base + S3C2410_SDIRSP3); + + writel(host->prescaler, host->base + S3C2410_SDIPRE); + + if (cmd->error) + debug_as_failure = 1; + + if (cmd->data && cmd->data->error) + debug_as_failure = 1; + + dbg_dumpcmd(host, cmd, debug_as_failure); + + /* Cleanup controller */ + writel(0, host->base + S3C2410_SDICMDARG); + writel(0, host->base + S3C2410_SDIDCON); + writel(0, host->base + S3C2410_SDICMDCON); + writel(0, host->base + host->sdiimsk); + + if (cmd->data && cmd->error) + cmd->data->error = cmd->error; + + if (cmd->data && cmd->data->stop && (!host->cmd_is_stop)) { + host->cmd_is_stop = 1; + s3cmci_send_request(host->mmc); + return; + } + + /* If we have no data transfer we are finished here */ + if (!mrq->data) + goto request_done; + + /* Calulate the amout of bytes transfer if there was no error */ + if (mrq->data->error == 0) { + mrq->data->bytes_xfered = + (mrq->data->blocks * mrq->data->blksz); + } else { + mrq->data->bytes_xfered = 0; + } + + /* If we had an error while transfering data we flush the + * DMA channel and the fifo to clear out any garbage. */ + if (mrq->data->error != 0) { + if (host->dodma) + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); + + if (host->is2440) { + /* Clear failure register and reset fifo. */ + writel(S3C2440_SDIFSTA_FIFORESET | + S3C2440_SDIFSTA_FIFOFAIL, + host->base + S3C2410_SDIFSTA); + } else { + u32 mci_con; + + /* reset fifo */ + mci_con = readl(host->base + S3C2410_SDICON); + mci_con |= S3C2410_SDICON_FIFORESET; + + writel(mci_con, host->base + S3C2410_SDICON); + } + } + +request_done: + host->complete_what = COMPLETION_NONE; + host->mrq = NULL; + mmc_request_done(host->mmc, mrq); +} + + +void s3cmci_dma_setup(struct s3cmci_host *host, enum s3c2410_dmasrc source) +{ + static enum s3c2410_dmasrc last_source = -1; + static int setup_ok; + + if (last_source == source) + return; + + last_source = source; + + s3c2410_dma_devconfig(host->dma, source, 3, + host->mem->start + host->sdidata); + + if (!setup_ok) { + s3c2410_dma_config(host->dma, 4, + (S3C2410_DCON_HWTRIG | S3C2410_DCON_CH0_SDI)); + s3c2410_dma_set_buffdone_fn(host->dma, + s3cmci_dma_done_callback); + s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART); + setup_ok = 1; + } +} + +static void s3cmci_send_command(struct s3cmci_host *host, + struct mmc_command *cmd) +{ + u32 ccon, imsk; + + imsk = S3C2410_SDIIMSK_CRCSTATUS | S3C2410_SDIIMSK_CMDTIMEOUT | + S3C2410_SDIIMSK_RESPONSEND | S3C2410_SDIIMSK_CMDSENT | + S3C2410_SDIIMSK_RESPONSECRC; + + enable_imask(host, imsk); + + if (cmd->data) + host->complete_what = COMPLETION_XFERFINISH_RSPFIN; + else if (cmd->flags & MMC_RSP_PRESENT) + host->complete_what = COMPLETION_RSPFIN; + else + host->complete_what = COMPLETION_CMDSENT; + + writel(cmd->arg, host->base + S3C2410_SDICMDARG); + + ccon = cmd->opcode & S3C2410_SDICMDCON_INDEX; + ccon |= S3C2410_SDICMDCON_SENDERHOST | S3C2410_SDICMDCON_CMDSTART; + + if (cmd->flags & MMC_RSP_PRESENT) + ccon |= S3C2410_SDICMDCON_WAITRSP; + + if (cmd->flags & MMC_RSP_136) + ccon |= S3C2410_SDICMDCON_LONGRSP; + + writel(ccon, host->base + S3C2410_SDICMDCON); +} + +static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data) +{ + u32 dcon, imsk, stoptries = 3; + + /* write DCON register */ + + if (!data) { + writel(0, host->base + S3C2410_SDIDCON); + return 0; + } + + while (readl(host->base + S3C2410_SDIDSTA) & + (S3C2410_SDIDSTA_TXDATAON | S3C2410_SDIDSTA_RXDATAON)) { + + dbg(host, dbg_err, + "mci_setup_data() transfer stillin progress.\n"); + + writel(0, host->base + S3C2410_SDIDCON); + s3cmci_reset(host); + + if ((stoptries--) == 0) { + dbg_dumpregs(host, "DRF"); + return -EINVAL; + } + } + + dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK; + + if (host->dodma) + dcon |= S3C2410_SDIDCON_DMAEN; + + if (host->bus_width == MMC_BUS_WIDTH_4) + dcon |= S3C2410_SDIDCON_WIDEBUS; + + if (!(data->flags & MMC_DATA_STREAM)) + dcon |= S3C2410_SDIDCON_BLOCKMODE; + + if (data->flags & MMC_DATA_WRITE) { + dcon |= S3C2410_SDIDCON_TXAFTERRESP; + dcon |= S3C2410_SDIDCON_XFER_TXSTART; + } + + if (data->flags & MMC_DATA_READ) { + dcon |= S3C2410_SDIDCON_RXAFTERCMD; + dcon |= S3C2410_SDIDCON_XFER_RXSTART; + } + + if (host->is2440) { + dcon |= S3C2440_SDIDCON_DS_WORD; + dcon |= S3C2440_SDIDCON_DATSTART; + } + + writel(dcon, host->base + S3C2410_SDIDCON); + + /* write BSIZE register */ + + writel(data->blksz, host->base + S3C2410_SDIBSIZE); + + /* add to IMASK register */ + imsk = S3C2410_SDIIMSK_FIFOFAIL | S3C2410_SDIIMSK_DATACRC | + S3C2410_SDIIMSK_DATATIMEOUT | S3C2410_SDIIMSK_DATAFINISH; + + enable_imask(host, imsk); + + /* write TIMER register */ + + if (host->is2440) { + writel(0x007FFFFF, host->base + S3C2410_SDITIMER); + } else { + writel(0x0000FFFF, host->base + S3C2410_SDITIMER); + + /* FIX: set slow clock to prevent timeouts on read */ + if (data->flags & MMC_DATA_READ) + writel(0xFF, host->base + S3C2410_SDIPRE); + } + + return 0; +} + +#define BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ) + +static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data) +{ + int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0; + + BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); + + host->pio_sgptr = 0; + host->pio_words = 0; + host->pio_count = 0; + host->pio_active = rw ? XFER_WRITE : XFER_READ; + + if (rw) { + do_pio_write(host); + enable_imask(host, S3C2410_SDIIMSK_TXFIFOHALF); + } else { + enable_imask(host, S3C2410_SDIIMSK_RXFIFOHALF + | S3C2410_SDIIMSK_RXFIFOLAST); + } + + return 0; +} + +static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) +{ + int dma_len, i; + int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0; + + BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); + + s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW); + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); + + dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + (rw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + + if (dma_len == 0) + return -ENOMEM; + + host->dma_complete = 0; + host->dmatogo = dma_len; + + for (i = 0; i < dma_len; i++) { + int res; + + dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i, + sg_dma_address(&data->sg[i]), + sg_dma_len(&data->sg[i])); + + res = s3c2410_dma_enqueue(host->dma, (void *) host, + sg_dma_address(&data->sg[i]), + sg_dma_len(&data->sg[i])); + + if (res) { + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); + return -EBUSY; + } + } + + s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START); + + return 0; +} + +static void s3cmci_send_request(struct mmc_host *mmc) +{ + struct s3cmci_host *host = mmc_priv(mmc); + struct mmc_request *mrq = host->mrq; + struct mmc_command *cmd = host->cmd_is_stop ? mrq->stop : mrq->cmd; + + host->ccnt++; + prepare_dbgmsg(host, cmd, host->cmd_is_stop); + + /* Clear command, data and fifo status registers + Fifo clear only necessary on 2440, but doesn't hurt on 2410 + */ + writel(0xFFFFFFFF, host->base + S3C2410_SDICMDSTAT); + writel(0xFFFFFFFF, host->base + S3C2410_SDIDSTA); + writel(0xFFFFFFFF, host->base + S3C2410_SDIFSTA); + + if (cmd->data) { + int res = s3cmci_setup_data(host, cmd->data); + + host->dcnt++; + + if (res) { + cmd->error = -EINVAL; + cmd->data->error = -EINVAL; + + mmc_request_done(mmc, mrq); + return; + } + + if (host->dodma) + res = s3cmci_prepare_dma(host, cmd->data); + else + res = s3cmci_prepare_pio(host, cmd->data); + + if (res) { + cmd->error = res; + cmd->data->error = res; + + mmc_request_done(mmc, mrq); + return; + } + } + + /* Send command */ + s3cmci_send_command(host, cmd); + + /* Enable Interrupt */ + enable_irq(host->irq); +} + +static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct s3cmci_host *host = mmc_priv(mmc); + + host->status = "mmc request"; + host->cmd_is_stop = 0; + host->mrq = mrq; + + s3cmci_send_request(mmc); +} + +static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct s3cmci_host *host = mmc_priv(mmc); + u32 mci_psc, mci_con; + + /* Set the power state */ + + mci_con = readl(host->base + S3C2410_SDICON); + + switch (ios->power_mode) { + case MMC_POWER_ON: + case MMC_POWER_UP: + s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK); + s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD); + s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0); + s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1); + s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2); + s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3); + + if (!host->is2440) + mci_con |= S3C2410_SDICON_FIFORESET; + + break; + + case MMC_POWER_OFF: + default: + s3c2410_gpio_setpin(S3C2410_GPE5, 0); + s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP); + + if (host->is2440) + mci_con |= S3C2440_SDICON_SDRESET; + + break; + } + + /* Set clock */ + for (mci_psc = 0; mci_psc < 255; mci_psc++) { + host->real_rate = host->clk_rate / (host->clk_div*(mci_psc+1)); + + if (host->real_rate <= ios->clock) + break; + } + + if (mci_psc > 255) + mci_psc = 255; + + host->prescaler = mci_psc; + writel(host->prescaler, host->base + S3C2410_SDIPRE); + + /* If requested clock is 0, real_rate will be 0, too */ + if (ios->clock == 0) + host->real_rate = 0; + + /* Set CLOCK_ENABLE */ + if (ios->clock) + mci_con |= S3C2410_SDICON_CLOCKTYPE; + else + mci_con &= ~S3C2410_SDICON_CLOCKTYPE; + + writel(mci_con, host->base + S3C2410_SDICON); + + if ((ios->power_mode == MMC_POWER_ON) || + (ios->power_mode == MMC_POWER_UP)) { + dbg(host, dbg_conf, "running at %lukHz (requested: %ukHz).\n", + host->real_rate/1000, ios->clock/1000); + } else { + dbg(host, dbg_conf, "powered down.\n"); + } + + host->bus_width = ios->bus_width; +} + +static void s3cmci_reset(struct s3cmci_host *host) +{ + u32 con = readl(host->base + S3C2410_SDICON); + + con |= S3C2440_SDICON_SDRESET; + writel(con, host->base + S3C2410_SDICON); +} + +static struct mmc_host_ops s3cmci_ops = { + .request = s3cmci_request, + .set_ios = s3cmci_set_ios, +}; + +static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) +{ + struct s3cmci_host *host; + struct mmc_host *mmc; + int ret; + + mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto probe_out; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + host->pdev = pdev; + host->is2440 = is2440; + + spin_lock_init(&host->complete_lock); + tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); + + if (is2440) { + host->sdiimsk = S3C2440_SDIIMSK; + host->sdidata = S3C2440_SDIDATA; + host->clk_div = 1; + } else { + host->sdiimsk = S3C2410_SDIIMSK; + host->sdidata = S3C2410_SDIDATA; + host->clk_div = 2; + } + + host->dodma = 0; + host->complete_what = COMPLETION_NONE; + host->pio_active = XFER_NONE; + + host->dma = S3CMCI_DMA; + host->irq_cd = IRQ_EINT2; + + host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!host->mem) { + dev_err(&pdev->dev, + "failed to get io memory region resouce.\n"); + + ret = -ENOENT; + goto probe_free_host; + } + + host->mem = request_mem_region(host->mem->start, + RESSIZE(host->mem), pdev->name); + + if (!host->mem) { + dev_err(&pdev->dev, "failed to request io memory region.\n"); + ret = -ENOENT; + goto probe_free_host; + } + + host->base = ioremap(host->mem->start, RESSIZE(host->mem)); + if (host->base == 0) { + dev_err(&pdev->dev, "failed to ioremap() io memory region.\n"); + ret = -EINVAL; + goto probe_free_mem_region; + } + + host->irq = platform_get_irq(pdev, 0); + if (host->irq == 0) { + dev_err(&pdev->dev, "failed to get interrupt resouce.\n"); + ret = -EINVAL; + goto probe_iounmap; + } + + if (request_irq(host->irq, s3cmci_irq, 0, DRIVER_NAME, host)) { + dev_err(&pdev->dev, "failed to request mci interrupt.\n"); + ret = -ENOENT; + goto probe_iounmap; + } + + /* We get spurious interrupts even when we have set the IMSK + * register to ignore everything, so use disable_irq() to make + * ensure we don't lock the system with un-serviceable requests. */ + + disable_irq(host->irq); + + s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_EINT2); + set_irq_type(host->irq_cd, IRQT_BOTHEDGE); + + if (request_irq(host->irq_cd, s3cmci_irq_cd, 0, DRIVER_NAME, host)) { + dev_err(&pdev->dev, + "failed to request card detect interrupt.\n"); + ret = -ENOENT; + goto probe_free_irq; + } + + if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL)) { + dev_err(&pdev->dev, "unable to get DMA channel.\n"); + ret = -EBUSY; + goto probe_free_irq_cd; + } + + host->clk = clk_get(&pdev->dev, "sdi"); + if (IS_ERR(host->clk)) { + dev_err(&pdev->dev, "failed to find clock source.\n"); + ret = PTR_ERR(host->clk); + host->clk = NULL; + goto probe_free_host; + } + + ret = clk_enable(host->clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable clock source.\n"); + goto clk_free; + } + + host->clk_rate = clk_get_rate(host->clk); + + mmc->ops = &s3cmci_ops; + mmc->ocr_avail = MMC_VDD_32_33; + mmc->caps = MMC_CAP_4_BIT_DATA; + mmc->f_min = host->clk_rate / (host->clk_div * 256); + mmc->f_max = host->clk_rate / host->clk_div; + + mmc->max_blk_count = 4095; + mmc->max_blk_size = 4095; + mmc->max_req_size = 4095 * 512; + mmc->max_seg_size = mmc->max_req_size; + + mmc->max_phys_segs = 128; + mmc->max_hw_segs = 128; + + dbg(host, dbg_debug, + "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%u.\n", + (host->is2440?"2440":""), + host->base, host->irq, host->irq_cd, host->dma); + + ret = mmc_add_host(mmc); + if (ret) { + dev_err(&pdev->dev, "failed to add mmc host.\n"); + goto free_dmabuf; + } + + platform_set_drvdata(pdev, mmc); + dev_info(&pdev->dev, "initialisation done.\n"); + + return 0; + + free_dmabuf: + clk_disable(host->clk); + + clk_free: + clk_put(host->clk); + + probe_free_irq_cd: + free_irq(host->irq_cd, host); + + probe_free_irq: + free_irq(host->irq, host); + + probe_iounmap: + iounmap(host->base); + + probe_free_mem_region: + release_mem_region(host->mem->start, RESSIZE(host->mem)); + + probe_free_host: + mmc_free_host(mmc); + probe_out: + return ret; +} + +static int __devexit s3cmci_remove(struct platform_device *pdev) +{ + struct mmc_host *mmc = platform_get_drvdata(pdev); + struct s3cmci_host *host = mmc_priv(mmc); + + mmc_remove_host(mmc); + + clk_disable(host->clk); + clk_put(host->clk); + + tasklet_disable(&host->pio_tasklet); + + free_irq(host->irq_cd, host); + free_irq(host->irq, host); + + iounmap(host->base); + release_mem_region(host->mem->start, RESSIZE(host->mem)); + + mmc_free_host(mmc); + return 0; +} + +static int __devinit s3cmci_probe_2410(struct platform_device *dev) +{ + return s3cmci_probe(dev, 0); +} + +static int __devinit s3cmci_probe_2412(struct platform_device *dev) +{ + return s3cmci_probe(dev, 1); +} + +static int __devinit s3cmci_probe_2440(struct platform_device *dev) +{ + return s3cmci_probe(dev, 1); +} + +#ifdef CONFIG_PM + +static int s3cmci_suspend(struct platform_device *dev, pm_message_t state) +{ + struct mmc_host *mmc = platform_get_drvdata(dev); + + return mmc_suspend_host(mmc, state); +} + +static int s3cmci_resume(struct platform_device *dev) +{ + struct mmc_host *mmc = platform_get_drvdata(dev); + + return mmc_resume_host(mmc); +} + +#else /* CONFIG_PM */ +#define s3cmci_suspend NULL +#define s3cmci_resume NULL +#endif /* CONFIG_PM */ + + +static struct platform_driver s3cmci_driver_2410 = { + .driver.name = "s3c2410-sdi", + .driver.owner = THIS_MODULE, + .probe = s3cmci_probe_2410, + .remove = __devexit_p(s3cmci_remove), + .suspend = s3cmci_suspend, + .resume = s3cmci_resume, +}; + +static struct platform_driver s3cmci_driver_2412 = { + .driver.name = "s3c2412-sdi", + .driver.owner = THIS_MODULE, + .probe = s3cmci_probe_2412, + .remove = __devexit_p(s3cmci_remove), + .suspend = s3cmci_suspend, + .resume = s3cmci_resume, +}; + +static struct platform_driver s3cmci_driver_2440 = { + .driver.name = "s3c2440-sdi", + .driver.owner = THIS_MODULE, + .probe = s3cmci_probe_2440, + .remove = __devexit_p(s3cmci_remove), + .suspend = s3cmci_suspend, + .resume = s3cmci_resume, +}; + + +static int __init s3cmci_init(void) +{ + platform_driver_register(&s3cmci_driver_2410); + platform_driver_register(&s3cmci_driver_2412); + platform_driver_register(&s3cmci_driver_2440); + return 0; +} + +static void __exit s3cmci_exit(void) +{ + platform_driver_unregister(&s3cmci_driver_2410); + platform_driver_unregister(&s3cmci_driver_2412); + platform_driver_unregister(&s3cmci_driver_2440); +} + +module_init(s3cmci_init); +module_exit(s3cmci_exit); + +MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Thomas Kleffel "); diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h new file mode 100644 index 000000000000..90b8af7d8a46 --- /dev/null +++ b/drivers/mmc/host/s3cmci.h @@ -0,0 +1,69 @@ +/* + * linux/drivers/mmc/s3cmci.h - Samsung S3C MCI driver + * + * Copyright (C) 2004-2006 Thomas Kleffel, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* FIXME: DMA Resource management ?! */ +#define S3CMCI_DMA 0 + +enum s3cmci_waitfor { + COMPLETION_NONE, + COMPLETION_FINALIZE, + COMPLETION_CMDSENT, + COMPLETION_RSPFIN, + COMPLETION_XFERFINISH, + COMPLETION_XFERFINISH_RSPFIN, +}; + +struct s3cmci_host { + struct platform_device *pdev; + struct mmc_host *mmc; + struct resource *mem; + struct clk *clk; + void __iomem *base; + int irq; + int irq_cd; + int dma; + + unsigned long clk_rate; + unsigned long clk_div; + unsigned long real_rate; + u8 prescaler; + + int is2440; + unsigned sdiimsk; + unsigned sdidata; + int dodma; + int dmatogo; + + struct mmc_request *mrq; + int cmd_is_stop; + + spinlock_t complete_lock; + enum s3cmci_waitfor complete_what; + + int dma_complete; + + u32 pio_sgptr; + u32 pio_words; + u32 pio_count; + u32 *pio_ptr; +#define XFER_NONE 0 +#define XFER_READ 1 +#define XFER_WRITE 2 + u32 pio_active; + + int bus_width; + + char dbgmsg_cmd[301]; + char dbgmsg_dat[301]; + char *status; + + unsigned int ccnt, dcnt; + struct tasklet_struct pio_tasklet; +}; diff --git a/include/asm-arm/arch-s3c2410/regs-sdi.h b/include/asm-arm/arch-s3c2410/regs-sdi.h index bb9d30b72952..bfb222fa4abb 100644 --- a/include/asm-arm/arch-s3c2410/regs-sdi.h +++ b/include/asm-arm/arch-s3c2410/regs-sdi.h @@ -28,9 +28,15 @@ #define S3C2410_SDIDCNT (0x30) #define S3C2410_SDIDSTA (0x34) #define S3C2410_SDIFSTA (0x38) + #define S3C2410_SDIDATA (0x3C) #define S3C2410_SDIIMSK (0x40) +#define S3C2440_SDIDATA (0x40) +#define S3C2440_SDIIMSK (0x3C) + +#define S3C2440_SDICON_SDRESET (1<<8) +#define S3C2440_SDICON_MMCCLOCK (1<<5) #define S3C2410_SDICON_BYTEORDER (1<<4) #define S3C2410_SDICON_SDIOIRQ (1<<3) #define S3C2410_SDICON_RWAITEN (1<<2) @@ -42,7 +48,8 @@ #define S3C2410_SDICMDCON_LONGRSP (1<<10) #define S3C2410_SDICMDCON_WAITRSP (1<<9) #define S3C2410_SDICMDCON_CMDSTART (1<<8) -#define S3C2410_SDICMDCON_INDEX (0xff) +#define S3C2410_SDICMDCON_SENDERHOST (1<<6) +#define S3C2410_SDICMDCON_INDEX (0x3f) #define S3C2410_SDICMDSTAT_CRCFAIL (1<<12) #define S3C2410_SDICMDSTAT_CMDSENT (1<<11) @@ -51,6 +58,9 @@ #define S3C2410_SDICMDSTAT_XFERING (1<<8) #define S3C2410_SDICMDSTAT_INDEX (0xff) +#define S3C2440_SDIDCON_DS_BYTE (0<<22) +#define S3C2440_SDIDCON_DS_HALFWORD (1<<22) +#define S3C2440_SDIDCON_DS_WORD (2<<22) #define S3C2410_SDIDCON_IRQPERIOD (1<<21) #define S3C2410_SDIDCON_TXAFTERRESP (1<<20) #define S3C2410_SDIDCON_RXAFTERCMD (1<<19) @@ -59,6 +69,7 @@ #define S3C2410_SDIDCON_WIDEBUS (1<<16) #define S3C2410_SDIDCON_DMAEN (1<<15) #define S3C2410_SDIDCON_STOP (1<<14) +#define S3C2440_SDIDCON_DATSTART (1<<14) #define S3C2410_SDIDCON_DATMODE (3<<12) #define S3C2410_SDIDCON_BLKNUM (0x7ff) @@ -68,6 +79,7 @@ #define S3C2410_SDIDCON_XFER_RXSTART (2<<12) #define S3C2410_SDIDCON_XFER_TXSTART (3<<12) +#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF) #define S3C2410_SDIDCNT_BLKNUM_SHIFT (12) #define S3C2410_SDIDSTA_RDYWAITREQ (1<<10) @@ -82,10 +94,12 @@ #define S3C2410_SDIDSTA_TXDATAON (1<<1) #define S3C2410_SDIDSTA_RXDATAON (1<<0) +#define S3C2440_SDIFSTA_FIFORESET (1<<16) +#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */ #define S3C2410_SDIFSTA_TFDET (1<<13) #define S3C2410_SDIFSTA_RFDET (1<<12) -#define S3C2410_SDIFSTA_TXHALF (1<<11) -#define S3C2410_SDIFSTA_TXEMPTY (1<<10) +#define S3C2410_SDIFSTA_TFHALF (1<<11) +#define S3C2410_SDIFSTA_TFEMPTY (1<<10) #define S3C2410_SDIFSTA_RFLAST (1<<9) #define S3C2410_SDIFSTA_RFFULL (1<<8) #define S3C2410_SDIFSTA_RFHALF (1<<7) -- cgit v1.2.3 From edb5a98e43682d66c98ddd1dee863d867807546e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:29 +0100 Subject: MMC: S3C24XX: Add platform data for MMC/SD driver This patch adds platform data support to the s3mci driver. This allows flexible board-specific configuration of set_power, card detect and read only pins. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 44 +++++++++++++++++++++++++++++++++++--- drivers/mmc/host/s3cmci.h | 1 + include/asm-arm/plat-s3c24xx/mci.h | 12 +++++++++++ 3 files changed, 54 insertions(+), 3 deletions(-) create mode 100644 include/asm-arm/plat-s3c24xx/mci.h (limited to 'include/asm-arm') diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 774af3d7218f..684a10ca2e8f 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -21,6 +21,8 @@ #include #include +#include + #include "s3cmci.h" #define DRIVER_NAME "s3c-mci" @@ -1011,6 +1013,9 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2); s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3); + if (host->pdata->set_power) + host->pdata->set_power(ios->power_mode, ios->vdd); + if (!host->is2440) mci_con |= S3C2410_SDICON_FIFORESET; @@ -1024,6 +1029,9 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->is2440) mci_con |= S3C2440_SDICON_SDRESET; + if (host->pdata->set_power) + host->pdata->set_power(ios->power_mode, ios->vdd); + break; } @@ -1072,9 +1080,25 @@ static void s3cmci_reset(struct s3cmci_host *host) writel(con, host->base + S3C2410_SDICON); } +static int s3cmci_get_ro(struct mmc_host *mmc) +{ + struct s3cmci_host *host = mmc_priv(mmc); + + if (host->pdata->gpio_wprotect == 0) + return 0; + + return s3c2410_gpio_getpin(host->pdata->gpio_wprotect); +} + static struct mmc_host_ops s3cmci_ops = { .request = s3cmci_request, .set_ios = s3cmci_set_ios, + .get_ro = s3cmci_get_ro, +}; + +static struct s3c24xx_mci_pdata s3cmci_def_pdata = { + /* This is currently here to avoid a number of if (host->pdata) + * checks. Any zero fields to ensure reaonable defaults are picked. */ }; static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) @@ -1094,6 +1118,12 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) host->pdev = pdev; host->is2440 = is2440; + host->pdata = pdev->dev.platform_data; + if (!host->pdata) { + pdev->dev.platform_data = &s3cmci_def_pdata; + host->pdata = &s3cmci_def_pdata; + } + spin_lock_init(&host->complete_lock); tasklet_init(&host->pio_tasklet, pio_tasklet, (unsigned long) host); @@ -1112,7 +1142,8 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) host->pio_active = XFER_NONE; host->dma = S3CMCI_DMA; - host->irq_cd = IRQ_EINT2; + host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect); + s3c2410_gpio_cfgpin(host->pdata->gpio_detect, S3C2410_GPIO_IRQ); host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!host->mem) { @@ -1158,7 +1189,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) disable_irq(host->irq); - s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_EINT2); + s3c2410_gpio_cfgpin(host->pdata->gpio_detect, S3C2410_GPIO_IRQ); set_irq_type(host->irq_cd, IRQT_BOTHEDGE); if (request_irq(host->irq_cd, s3cmci_irq_cd, 0, DRIVER_NAME, host)) { @@ -1168,6 +1199,10 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) goto probe_free_irq; } + if (host->pdata->gpio_wprotect) + s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect, + S3C2410_GPIO_INPUT); + if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL)) { dev_err(&pdev->dev, "unable to get DMA channel.\n"); ret = -EBUSY; @@ -1191,11 +1226,14 @@ static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440) host->clk_rate = clk_get_rate(host->clk); mmc->ops = &s3cmci_ops; - mmc->ocr_avail = MMC_VDD_32_33; + mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; mmc->caps = MMC_CAP_4_BIT_DATA; mmc->f_min = host->clk_rate / (host->clk_div * 256); mmc->f_max = host->clk_rate / host->clk_div; + if (host->pdata->ocr_avail) + mmc->ocr_avail = host->pdata->ocr_avail; + mmc->max_blk_count = 4095; mmc->max_blk_size = 4095; mmc->max_req_size = 4095 * 512; diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h index 90b8af7d8a46..37d9c60010c9 100644 --- a/drivers/mmc/host/s3cmci.h +++ b/drivers/mmc/host/s3cmci.h @@ -22,6 +22,7 @@ enum s3cmci_waitfor { struct s3cmci_host { struct platform_device *pdev; + struct s3c24xx_mci_pdata *pdata; struct mmc_host *mmc; struct resource *mem; struct clk *clk; diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/include/asm-arm/plat-s3c24xx/mci.h new file mode 100644 index 000000000000..5be2c1449c6d --- /dev/null +++ b/include/asm-arm/plat-s3c24xx/mci.h @@ -0,0 +1,12 @@ +#ifndef _ARCH_MCI_H +#define _ARCH_MCI_H + +struct s3c24xx_mci_pdata { + unsigned int gpio_detect; + unsigned int gpio_wprotect; + unsigned long ocr_avail; + void (*set_power)(unsigned char power_mode, + unsigned short vdd); +}; + +#endif /* _ARCH_NCI_H */ -- cgit v1.2.3 From cf0984c8edf63017fcc2ead212ca057877e345df Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:30 +0100 Subject: MMC: S3C24XX: Add support to invert write protect line Support for inverting the sense of the MMC driver's write protect detection line. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 11 +++++++++-- include/asm-arm/plat-s3c24xx/mci.h | 2 ++ 2 files changed, 11 insertions(+), 2 deletions(-) (limited to 'include/asm-arm') diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 684a10ca2e8f..4fd11d8864eb 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1083,11 +1083,18 @@ static void s3cmci_reset(struct s3cmci_host *host) static int s3cmci_get_ro(struct mmc_host *mmc) { struct s3cmci_host *host = mmc_priv(mmc); + struct s3c24xx_mci_pdata *pdata = host->pdata; + int ret; - if (host->pdata->gpio_wprotect == 0) + if (pdata->gpio_wprotect == 0) return 0; - return s3c2410_gpio_getpin(host->pdata->gpio_wprotect); + ret = s3c2410_gpio_getpin(pdata->gpio_wprotect); + + if (pdata->wprotect_invert) + ret = !ret; + + return ret; } static struct mmc_host_ops s3cmci_ops = { diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/include/asm-arm/plat-s3c24xx/mci.h index 5be2c1449c6d..4f4ccd18f0cb 100644 --- a/include/asm-arm/plat-s3c24xx/mci.h +++ b/include/asm-arm/plat-s3c24xx/mci.h @@ -2,6 +2,8 @@ #define _ARCH_MCI_H struct s3c24xx_mci_pdata { + unsigned int wprotect_invert : 1; + unsigned int gpio_detect; unsigned int gpio_wprotect; unsigned long ocr_avail; -- cgit v1.2.3 From 50a845700b3b55f825b0eb901b03d6091f66d9f4 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 30 Jun 2008 22:40:36 +0100 Subject: MMC: S3C24XX: Add media presence test to request handling. Ensure that we have physical media present before attempting to send a request to a card. This ensures that we do not get flooded by errors from commands that can never be completed timing out. Signed-off-by: Ben Dooks Signed-off-by: Pierre Ossman --- drivers/mmc/host/s3cmci.c | 19 ++++++++++++++++++- include/asm-arm/plat-s3c24xx/mci.h | 1 + 2 files changed, 19 insertions(+), 1 deletion(-) (limited to 'include/asm-arm') diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 6f1b474e33b9..62d73d3497f0 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -984,6 +984,18 @@ static void s3cmci_send_request(struct mmc_host *mmc) enable_irq(host->irq); } +static int s3cmci_card_present(struct s3cmci_host *host) +{ + struct s3c24xx_mci_pdata *pdata = host->pdata; + int ret; + + if (pdata->gpio_detect == 0) + return -ENOSYS; + + ret = s3c2410_gpio_getpin(pdata->gpio_detect) ? 0 : 1; + return ret ^ pdata->detect_invert; +} + static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) { struct s3cmci_host *host = mmc_priv(mmc); @@ -992,7 +1004,12 @@ static void s3cmci_request(struct mmc_host *mmc, struct mmc_request *mrq) host->cmd_is_stop = 0; host->mrq = mrq; - s3cmci_send_request(mmc); + if (s3cmci_card_present(host) == 0) { + dbg(host, dbg_err, "%s: no medium present\n", __func__); + host->mrq->cmd->error = -ENOMEDIUM; + mmc_request_done(mmc, mrq); + } else + s3cmci_send_request(mmc); } static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/include/asm-arm/plat-s3c24xx/mci.h index 4f4ccd18f0cb..2d0852ac3b27 100644 --- a/include/asm-arm/plat-s3c24xx/mci.h +++ b/include/asm-arm/plat-s3c24xx/mci.h @@ -3,6 +3,7 @@ struct s3c24xx_mci_pdata { unsigned int wprotect_invert : 1; + unsigned int detect_invert : 1; /* set => detect active high. */ unsigned int gpio_detect; unsigned int gpio_wprotect; -- cgit v1.2.3