From 2355e10f07b2c550c671f98b68aedf323c299aeb Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 16 Nov 2011 10:42:09 +0800 Subject: ACPI 5.0: Basic support for FADT version 5 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- include/acpi/actbl.h | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) (limited to 'include/acpi') diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index f1380287ed4d..7d0e051b4863 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -255,6 +255,8 @@ struct acpi_table_fadt { struct acpi_generic_address xpm_timer_block; /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */ struct acpi_generic_address xgpe0_block; /* 64-bit Extended General Purpose Event 0 Reg Blk address */ struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */ + struct acpi_generic_address sleep_control; /* 64-bit Sleep Control register */ + struct acpi_generic_address sleep_status; /* 64-bit Sleep Status register */ }; /* Masks for FADT Boot Architecture Flags (boot_flags) */ @@ -264,6 +266,7 @@ struct acpi_table_fadt { #define ACPI_FADT_NO_VGA (1<<2) /* 02: [V4] It is not safe to probe for VGA hardware */ #define ACPI_FADT_NO_MSI (1<<3) /* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */ #define ACPI_FADT_NO_ASPM (1<<4) /* 04: [V4] PCIe ASPM control must not be enabled */ +#define ACPI_FADT_NO_CMOS_RTC (1<<5) /* 05: [V5] No CMOS real-time clock present */ #define FADT2_REVISION_ID 3 @@ -289,6 +292,8 @@ struct acpi_table_fadt { #define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */ #define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */ #define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local x_aPICs must use physical dest mode (ACPI 3.0) */ +#define ACPI_FADT_HW_REDUCED (1<<20) /* 20: [V5] ACPI hardware is not implemented (ACPI 5.0) */ +#define ACPI_FADT_LOW_POWER_S0 (1<<21) /* 21: [V5] S0 power savings are equal or better than S3 (ACPI 5.0) */ /* Values for preferred_profile (Preferred Power Management Profiles) */ @@ -299,14 +304,16 @@ enum acpi_prefered_pm_profiles { PM_WORKSTATION = 3, PM_ENTERPRISE_SERVER = 4, PM_SOHO_SERVER = 5, - PM_APPLIANCE_PC = 6 + PM_APPLIANCE_PC = 6, + PM_PERFORMANCE_SERVER = 7, + PM_TABLET = 8 }; /* Reset to default packing */ #pragma pack() -#define ACPI_FADT_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_fadt, f) +#define ACPI_FADT_OFFSET(f) (u16) ACPI_OFFSET (struct acpi_table_fadt, f) /* * Internal table-related structures @@ -351,12 +358,15 @@ struct acpi_table_desc { * FADT is the bottom line as to what the version really is. * * For reference, the values below are as follows: - * FADT V1 size: 0x74 - * FADT V2 size: 0x84 - * FADT V3+ size: 0xF4 + * FADT V1 size: 0x074 + * FADT V2 size: 0x084 + * FADT V3 size: 0x0F4 + * FADT V4 size: 0x0F4 + * FADT V5 size: 0x10C */ #define ACPI_FADT_V1_SIZE (u32) (ACPI_FADT_OFFSET (flags) + 4) #define ACPI_FADT_V2_SIZE (u32) (ACPI_FADT_OFFSET (reserved4[0]) + 3) -#define ACPI_FADT_V3_SIZE (u32) (sizeof (struct acpi_table_fadt)) +#define ACPI_FADT_V3_SIZE (u32) (ACPI_FADT_OFFSET (sleep_control)) +#define ACPI_FADT_V5_SIZE (u32) (sizeof (struct acpi_table_fadt)) #endif /* __ACTBL_H__ */ -- cgit v1.2.3 From 22e5b40ab21fcac21db0ff25fbb844ffecc73a4a Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 16 Nov 2011 10:57:28 +0800 Subject: ACPI 5.0: Implement hardware-reduced option If HW-reduced flag is set in the FADT, do not attempt to access or initialize any ACPI hardware, including SCI and global lock. No FACS will be present. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acglobal.h | 13 ++++++++++++- drivers/acpi/acpica/evevent.c | 12 ++++++++++++ drivers/acpi/acpica/evglock.c | 6 ++++++ drivers/acpi/acpica/tbfadt.c | 22 ++++++++++++++++++++-- drivers/acpi/acpica/tbutils.c | 7 +++++++ include/acpi/acpixf.h | 1 + 6 files changed, 58 insertions(+), 3 deletions(-) (limited to 'include/acpi') diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 76dc02f15574..25912a93dea7 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -140,8 +140,19 @@ u32 acpi_gbl_trace_flags; acpi_name acpi_gbl_trace_method_name; u8 acpi_gbl_system_awake_and_running; +/* + * ACPI 5.0 introduces the concept of a "reduced hardware platform", meaning + * that the ACPI hardware is no longer required. A flag in the FADT indicates + * a reduced HW machine, and that flag is duplicated here for convenience. + */ +u8 acpi_gbl_reduced_hardware; + #endif +/* Do not disassemble buffers to resource descriptors */ + +ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_no_resource_disassembly, FALSE); + /***************************************************************************** * * Debug support @@ -207,7 +218,7 @@ ACPI_EXTERN struct acpi_rw_lock acpi_gbl_namespace_rw_lock; /***************************************************************************** * - * Mutual exlusion within ACPICA subsystem + * Mutual exclusion within ACPICA subsystem * ****************************************************************************/ diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c index d458b041e651..1f43be470199 100644 --- a/drivers/acpi/acpica/evevent.c +++ b/drivers/acpi/acpica/evevent.c @@ -71,6 +71,12 @@ acpi_status acpi_ev_initialize_events(void) ACPI_FUNCTION_TRACE(ev_initialize_events); + /* If Hardware Reduced flag is set, there are no fixed events */ + + if (acpi_gbl_reduced_hardware) { + return_ACPI_STATUS(AE_OK); + } + /* * Initialize the Fixed and General Purpose Events. This is done prior to * enabling SCIs to prevent interrupts from occurring before the handlers @@ -111,6 +117,12 @@ acpi_status acpi_ev_install_xrupt_handlers(void) ACPI_FUNCTION_TRACE(ev_install_xrupt_handlers); + /* If Hardware Reduced flag is set, there is no ACPI h/w */ + + if (acpi_gbl_reduced_hardware) { + return_ACPI_STATUS(AE_OK); + } + /* Install the SCI handler */ status = acpi_ev_install_sci_handler(); diff --git a/drivers/acpi/acpica/evglock.c b/drivers/acpi/acpica/evglock.c index 56a562a1e5d7..af1e71af1b64 100644 --- a/drivers/acpi/acpica/evglock.c +++ b/drivers/acpi/acpica/evglock.c @@ -70,6 +70,12 @@ acpi_status acpi_ev_init_global_lock_handler(void) ACPI_FUNCTION_TRACE(ev_init_global_lock_handler); + /* If Hardware Reduced flag is set, there is no global lock */ + + if (acpi_gbl_reduced_hardware) { + return_ACPI_STATUS(AE_OK); + } + /* Attempt installation of the global lock handler */ status = acpi_install_fixed_event_handler(ACPI_EVENT_GLOBAL, diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c index 536fd2bc7a47..1e1a7de34439 100644 --- a/drivers/acpi/acpica/tbfadt.c +++ b/drivers/acpi/acpica/tbfadt.c @@ -253,8 +253,13 @@ void acpi_tb_parse_fadt(u32 table_index) acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xdsdt, ACPI_SIG_DSDT, ACPI_TABLE_INDEX_DSDT); - acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xfacs, - ACPI_SIG_FACS, ACPI_TABLE_INDEX_FACS); + /* If Hardware Reduced flag is set, there is no FACS */ + + if (!acpi_gbl_reduced_hardware) { + acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT. + Xfacs, ACPI_SIG_FACS, + ACPI_TABLE_INDEX_FACS); + } } /******************************************************************************* @@ -297,6 +302,13 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length) ACPI_MEMCPY(&acpi_gbl_FADT, table, ACPI_MIN(length, sizeof(struct acpi_table_fadt))); + /* Take a copy of the Hardware Reduced flag */ + + acpi_gbl_reduced_hardware = FALSE; + if (acpi_gbl_FADT.flags & ACPI_FADT_HW_REDUCED) { + acpi_gbl_reduced_hardware = TRUE; + } + /* Convert the local copy of the FADT to the common internal format */ acpi_tb_convert_fadt(); @@ -502,6 +514,12 @@ static void acpi_tb_validate_fadt(void) acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt; } + /* If Hardware Reduced flag is set, we are all done */ + + if (acpi_gbl_reduced_hardware) { + return; + } + /* Examine all of the 64-bit extended address fields (X fields) */ for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) { diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c index 0f2d395feaba..da56a1908966 100644 --- a/drivers/acpi/acpica/tbutils.c +++ b/drivers/acpi/acpica/tbutils.c @@ -135,6 +135,13 @@ acpi_status acpi_tb_initialize_facs(void) { acpi_status status; + /* If Hardware Reduced flag is set, there is no FACS */ + + if (acpi_gbl_reduced_hardware) { + acpi_gbl_FACS = NULL; + return (AE_OK); + } + status = acpi_get_table_by_index(ACPI_TABLE_INDEX_FACS, ACPI_CAST_INDIRECT_PTR(struct acpi_table_header, diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index f554a9313b43..9ba2e3aff5c6 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -74,6 +74,7 @@ extern u8 acpi_gbl_disable_auto_repair; extern u32 acpi_current_gpe_count; extern struct acpi_table_fadt acpi_gbl_FADT; extern u8 acpi_gbl_system_awake_and_running; +extern u8 acpi_gbl_reduced_hardware; /* ACPI 5.0 */ extern u32 acpi_rsdt_forced; /* -- cgit v1.2.3 From c5bd6537329e66a8b36234f19a36d94b72d07394 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 16 Nov 2011 11:04:00 +0800 Subject: ACPI 5.0: Add new/changed tables to headers Adds new file, actbl3.h Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- include/acpi/actbl.h | 1 + include/acpi/actbl1.h | 57 +++++- include/acpi/actbl3.h | 552 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 606 insertions(+), 4 deletions(-) create mode 100644 include/acpi/actbl3.h (limited to 'include/acpi') diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index 7d0e051b4863..8e1b92f6f650 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -349,6 +349,7 @@ struct acpi_table_desc { #include #include +#include /* * Sizes of the various flavors of FADT. We need to look closely diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index 7504bc99b29b..71e747beac8f 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -228,7 +228,8 @@ enum acpi_einj_actions { ACPI_EINJ_EXECUTE_OPERATION = 5, ACPI_EINJ_CHECK_BUSY_STATUS = 6, ACPI_EINJ_GET_COMMAND_STATUS = 7, - ACPI_EINJ_ACTION_RESERVED = 8, /* 8 and greater are reserved */ + ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS = 8, + ACPI_EINJ_ACTION_RESERVED = 9, /* 9 and greater are reserved */ ACPI_EINJ_TRIGGER_ERROR = 0xFF /* Except for this value */ }; @@ -240,7 +241,27 @@ enum acpi_einj_instructions { ACPI_EINJ_WRITE_REGISTER = 2, ACPI_EINJ_WRITE_REGISTER_VALUE = 3, ACPI_EINJ_NOOP = 4, - ACPI_EINJ_INSTRUCTION_RESERVED = 5 /* 5 and greater are reserved */ + ACPI_EINJ_FLUSH_CACHELINE = 5, + ACPI_EINJ_INSTRUCTION_RESERVED = 6 /* 6 and greater are reserved */ +}; + +struct acpi_einj_error_type_with_addr { + u32 error_type; + u32 vendor_struct_offset; + u32 flags; + u32 apic_id; + u64 address; + u64 range; + u32 pcie_id; +}; + +struct acpi_einj_vendor { + u32 length; + u32 pcie_id; + u16 vendor_id; + u16 device_id; + u8 revision_id; + u8 reserved[3]; }; /* EINJ Trigger Error Action Table */ @@ -275,6 +296,7 @@ enum acpi_einj_command_status { #define ACPI_EINJ_PLATFORM_CORRECTABLE (1<<9) #define ACPI_EINJ_PLATFORM_UNCORRECTABLE (1<<10) #define ACPI_EINJ_PLATFORM_FATAL (1<<11) +#define ACPI_EINJ_VENDOR_DEFINED (1<<31) /******************************************************************************* * @@ -631,7 +653,9 @@ enum acpi_madt_type { ACPI_MADT_TYPE_INTERRUPT_SOURCE = 8, ACPI_MADT_TYPE_LOCAL_X2APIC = 9, ACPI_MADT_TYPE_LOCAL_X2APIC_NMI = 10, - ACPI_MADT_TYPE_RESERVED = 11 /* 11 and greater are reserved */ + ACPI_MADT_TYPE_GENERIC_INTERRUPT = 11, + ACPI_MADT_TYPE_GENERIC_DISTRIBUTOR = 12, + ACPI_MADT_TYPE_RESERVED = 13 /* 13 and greater are reserved */ }; /* @@ -752,11 +776,36 @@ struct acpi_madt_local_x2apic_nmi { u8 reserved[3]; }; +/* 11: Generic Interrupt (ACPI 5.0) */ + +struct acpi_madt_generic_interrupt { + struct acpi_subtable_header header; + u16 reserved; /* Reserved - must be zero */ + u32 gic_id; + u32 uid; + u32 flags; + u32 parking_version; + u32 performance_interrupt; + u64 parked_address; + u64 base_address; +}; + +/* 12: Generic Distributor (ACPI 5.0) */ + +struct acpi_madt_generic_distributor { + struct acpi_subtable_header header; + u16 reserved; /* Reserved - must be zero */ + u32 gic_id; + u64 base_address; + u32 global_irq_base; + u32 reserved2; /* Reserved - must be zero */ +}; + /* * Common flags fields for MADT subtables */ -/* MADT Local APIC flags (lapic_flags) */ +/* MADT Local APIC flags (lapic_flags) and GIC flags */ #define ACPI_MADT_ENABLED (1) /* 00: Processor is usable if set */ diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h new file mode 100644 index 000000000000..c22ce80e9535 --- /dev/null +++ b/include/acpi/actbl3.h @@ -0,0 +1,552 @@ +/****************************************************************************** + * + * Name: actbl3.h - ACPI Table Definitions + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2011, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#ifndef __ACTBL3_H__ +#define __ACTBL3_H__ + +/******************************************************************************* + * + * Additional ACPI Tables (3) + * + * These tables are not consumed directly by the ACPICA subsystem, but are + * included here to support device drivers and the AML disassembler. + * + * The tables in this file are fully defined within the ACPI specification. + * + ******************************************************************************/ + +/* + * Values for description table header signatures for tables defined in this + * file. Useful because they make it more difficult to inadvertently type in + * the wrong signature. + */ +#define ACPI_SIG_BGRT "BGRT" /* Boot Graphics Resource Table */ +#define ACPI_SIG_DRTM "DRTM" /* Dynamic Root of Trust for Measurement table */ +#define ACPI_SIG_FPDT "FPDT" /* Firmware Performance Data Table */ +#define ACPI_SIG_GTDT "GTDT" /* Generic Timer Description Table */ +#define ACPI_SIG_MPST "MPST" /* Memory Power State Table */ +#define ACPI_SIG_PCCT "PCCT" /* Platform Communications Channel Table */ +#define ACPI_SIG_PMTT "PMTT" /* Platform Memory Topology Table */ +#define ACPI_SIG_RASF "RASF" /* RAS Feature table */ + +#define ACPI_SIG_S3PT "S3PT" /* S3 Performance (sub)Table */ +#define ACPI_SIG_PCCS "PCC" /* PCC Shared Memory Region */ + +/* Reserved table signatures */ + +#define ACPI_SIG_CSRT "CSRT" /* Core System Resources Table */ +#define ACPI_SIG_DBG2 "DBG2" /* Debug Port table 2 */ +#define ACPI_SIG_MATR "MATR" /* Memory Address Translation Table */ +#define ACPI_SIG_MSDM "MSDM" /* Microsoft Data Management Table */ +#define ACPI_SIG_WPBT "WPBT" /* Windows Platform Binary Table */ + +/* + * All tables must be byte-packed to match the ACPI specification, since + * the tables are provided by the system BIOS. + */ +#pragma pack(1) + +/* + * Note about bitfields: The u8 type is used for bitfields in ACPI tables. + * This is the only type that is even remotely portable. Anything else is not + * portable, so do not use any other bitfield types. + */ + +/******************************************************************************* + * + * BGRT - Boot Graphics Resource Table (ACPI 5.0) + * Version 1 + * + ******************************************************************************/ + +struct acpi_table_bgrt { + struct acpi_table_header header; /* Common ACPI table header */ + u16 version; + u8 status; + u8 image_type; + u64 image_address; + u32 image_offset_x; + u32 image_offset_y; +}; + +/******************************************************************************* + * + * DRTM - Dynamic Root of Trust for Measurement table + * + ******************************************************************************/ + +struct acpi_table_drtm { + struct acpi_table_header header; /* Common ACPI table header */ + u64 entry_base_address; + u64 entry_length; + u32 entry_address32; + u64 entry_address64; + u64 exit_address; + u64 log_area_address; + u32 log_area_length; + u64 arch_dependent_address; + u32 flags; +}; + +/* 1) Validated Tables List */ + +struct acpi_drtm_vtl_list { + u32 validated_table_list_count; +}; + +/* 2) Resources List */ + +struct acpi_drtm_resource_list { + u32 resource_list_count; +}; + +/* 3) Platform-specific Identifiers List */ + +struct acpi_drtm_id_list { + u32 id_list_count; +}; + +/******************************************************************************* + * + * FPDT - Firmware Performance Data Table (ACPI 5.0) + * Version 1 + * + ******************************************************************************/ + +struct acpi_table_fpdt { + struct acpi_table_header header; /* Common ACPI table header */ +}; + +/* FPDT subtable header */ + +struct acpi_fpdt_header { + u16 type; + u8 length; + u8 revision; +}; + +/* Values for Type field above */ + +enum acpi_fpdt_type { + ACPI_FPDT_TYPE_BOOT = 0, + ACPI_FPDT_TYPE_S3PERF = 1, +}; + +/* + * FPDT subtables + */ + +/* 0: Firmware Basic Boot Performance Record */ + +struct acpi_fpdt_boot { + struct acpi_fpdt_header header; + u8 reserved[4]; + u64 reset_end; + u64 load_start; + u64 startup_start; + u64 exit_services_entry; + u64 exit_services_exit; +}; + +/* 1: S3 Performance Table Pointer Record */ + +struct acpi_fpdt_s3pt_ptr { + struct acpi_fpdt_header header; + u8 reserved[4]; + u64 address; +}; + +/* + * S3PT - S3 Performance Table. This table is pointed to by the + * FPDT S3 Pointer Record above. + */ +struct acpi_table_s3pt { + u8 signature[4]; /* "S3PT" */ + u32 length; +}; + +/* + * S3PT Subtables + */ +struct acpi_s3pt_header { + u16 type; + u8 length; + u8 revision; +}; + +/* Values for Type field above */ + +enum acpi_s3pt_type { + ACPI_S3PT_TYPE_RESUME = 0, + ACPI_S3PT_TYPE_SUSPEND = 1, +}; + +struct acpi_s3pt_resume { + struct acpi_s3pt_header header; + u32 resume_count; + u64 full_resume; + u64 average_resume; +}; + +struct acpi_s3pt_suspend { + struct acpi_s3pt_header header; + u64 suspend_start; + u64 suspend_end; +}; + +/******************************************************************************* + * + * GTDT - Generic Timer Description Table (ACPI 5.0) + * Version 1 + * + ******************************************************************************/ + +struct acpi_table_gtdt { + struct acpi_table_header header; /* Common ACPI table header */ + u64 address; + u32 flags; + u32 secure_pl1_interrupt; + u32 secure_pl1_flags; + u32 non_secure_pl1_interrupt; + u32 non_secure_pl1_flags; + u32 virtual_timer_interrupt; + u32 virtual_timer_flags; + u32 non_secure_pl2_interrupt; + u32 non_secure_pl2_flags; +}; + +/* Values for Flags field above */ + +#define ACPI_GTDT_MAPPED_BLOCK_PRESENT 1 + +/* Values for all "TimerFlags" fields above */ + +#define ACPI_GTDT_INTERRUPT_MODE 1 +#define ACPI_GTDT_INTERRUPT_POLARITY 2 + +/******************************************************************************* + * + * MPST - Memory Power State Table (ACPI 5.0) + * Version 1 + * + ******************************************************************************/ + +#define ACPI_MPST_CHANNEL_INFO \ + u16 reserved1; \ + u8 channel_id; \ + u8 reserved2; \ + u16 power_node_count; + +/* Main table */ + +struct acpi_table_mpst { + struct acpi_table_header header; /* Common ACPI table header */ + ACPI_MPST_CHANNEL_INFO /* Platform Communication Channel */ +}; + +/* Memory Platform Communication Channel Info */ + +struct acpi_mpst_channel { + ACPI_MPST_CHANNEL_INFO /* Platform Communication Channel */ +}; + +/* Memory Power Node Structure */ + +struct acpi_mpst_power_node { + u8 flags; + u8 reserved1; + u16 node_id; + u32 length; + u64 range_address; + u64 range_length; + u8 num_power_states; + u8 num_physical_components; + u16 reserved2; +}; + +/* Values for Flags field above */ + +#define ACPI_MPST_ENABLED 1 +#define ACPI_MPST_POWER_MANAGED 2 +#define ACPI_MPST_HOT_PLUG_CAPABLE 4 + +/* Memory Power State Structure (follows POWER_NODE above) */ + +struct acpi_mpst_power_state { + u8 power_state; + u8 info_index; +}; + +/* Physical Component ID Structure (follows POWER_STATE above) */ + +struct acpi_mpst_component { + u16 component_id; +}; + +/* Memory Power State Characteristics Structure (follows all POWER_NODEs) */ + +struct acpi_mpst_data_hdr { + u16 characteristics_count; +}; + +struct acpi_mpst_power_data { + u8 revision; + u8 flags; + u16 reserved1; + u32 average_power; + u32 power_saving; + u64 exit_latency; + u64 reserved2; +}; + +/* Values for Flags field above */ + +#define ACPI_MPST_PRESERVE 1 +#define ACPI_MPST_AUTOENTRY 2 +#define ACPI_MPST_AUTOEXIT 4 + +/* Shared Memory Region (not part of an ACPI table) */ + +struct acpi_mpst_shared { + u32 signature; + u16 pcc_command; + u16 pcc_status; + u16 command_register; + u16 status_register; + u16 power_state_id; + u16 power_node_id; + u64 energy_consumed; + u64 average_power; +}; + +/******************************************************************************* + * + * PCCT - Platform Communications Channel Table (ACPI 5.0) + * Version 1 + * + ******************************************************************************/ + +struct acpi_table_pcct { + struct acpi_table_header header; /* Common ACPI table header */ + u32 flags; + u32 latency; + u32 reserved; +}; + +/* Values for Flags field above */ + +#define ACPI_PCCT_DOORBELL 1 + +/* + * PCCT subtables + */ + +/* 0: Generic Communications Subspace */ + +struct acpi_pcct_subspace { + struct acpi_subtable_header header; + u8 reserved[6]; + u64 base_address; + u64 length; + struct acpi_generic_address doorbell_register; + u64 preserve_mask; + u64 write_mask; +}; + +/* + * PCC memory structures (not part of the ACPI table) + */ + +/* Shared Memory Region */ + +struct acpi_pcct_shared_memory { + u32 signature; + u16 command; + u16 status; +}; + +/******************************************************************************* + * + * PMTT - Platform Memory Topology Table (ACPI 5.0) + * Version 1 + * + ******************************************************************************/ + +struct acpi_table_pmtt { + struct acpi_table_header header; /* Common ACPI table header */ + u32 reserved; +}; + +/* Common header for PMTT subtables that follow main table */ + +struct acpi_pmtt_header { + u8 type; + u8 reserved1; + u16 length; + u16 flags; + u16 reserved2; +}; + +/* Values for Type field above */ + +#define ACPI_PMTT_TYPE_SOCKET 0 +#define ACPI_PMTT_TYPE_CONTROLLER 1 +#define ACPI_PMTT_TYPE_DIMM 2 +#define ACPI_PMTT_TYPE_RESERVED 3 /* 0x03-0xFF are reserved */ + +/* Values for Flags field above */ + +#define ACPI_PMTT_TOP_LEVEL 0x0001 +#define ACPI_PMTT_PHYSICAL 0x0002 +#define ACPI_PMTT_MEMORY_TYPE 0x000C + +/* + * PMTT subtables, correspond to Type in struct acpi_pmtt_header + */ + +/* 0: Socket Structure */ + +struct acpi_pmtt_socket { + struct acpi_pmtt_header header; + u16 socket_id; + u16 reserved; +}; + +/* 1: Memory Controller subtable */ + +struct acpi_pmtt_controller { + struct acpi_pmtt_header header; + u32 read_latency; + u32 write_latency; + u32 read_bandwidth; + u32 write_bandwidth; + u16 access_width; + u16 alignment; + u16 reserved; + u16 domain_count; +}; + +/* 1a: Proximity Domain substructure */ + +struct acpi_pmtt_domain { + u32 proximity_domain; +}; + +/* 2: Physical Component Identifier (DIMM) */ + +struct acpi_pmtt_physical_component { + struct acpi_pmtt_header header; + u16 component_id; + u16 reserved; + u32 memory_size; + u32 bios_handle; +}; + +/******************************************************************************* + * + * RASF - RAS Feature Table (ACPI 5.0) + * Version 1 + * + ******************************************************************************/ + +struct acpi_table_rasf { + struct acpi_table_header header; /* Common ACPI table header */ + u8 channel_id[12]; +}; + +/* RASF Platform Communication Channel Shared Memory Region */ + +struct acpi_rasf_shared_memory { + u32 signature; + u16 command; + u16 status; + u64 requested_address; + u64 requested_length; + u64 actual_address; + u64 actual_length; + u16 flags; + u8 speed; +}; + +/* Masks for Flags and Speed fields above */ + +#define ACPI_RASF_SCRUBBER_RUNNING 1 +#define ACPI_RASF_SPEED (7<<1) + +/* Channel Commands */ + +enum acpi_rasf_commands { + ACPI_RASF_GET_RAS_CAPABILITIES = 1, + ACPI_RASF_GET_PATROL_PARAMETERS = 2, + ACPI_RASF_START_PATROL_SCRUBBER = 3, + ACPI_RASF_STOP_PATROL_SCRUBBER = 4 +}; + +/* Channel Command flags */ + +#define ACPI_RASF_GENERATE_SCI (1<<15) + +/* Status values */ + +enum acpi_rasf_status { + ACPI_RASF_SUCCESS = 0, + ACPI_RASF_NOT_VALID = 1, + ACPI_RASF_NOT_SUPPORTED = 2, + ACPI_RASF_BUSY = 3, + ACPI_RASF_FAILED = 4, + ACPI_RASF_ABORTED = 5, + ACPI_RASF_INVALID_DATA = 6 +}; + +/* Status flags */ + +#define ACPI_RASF_COMMAND_COMPLETE (1) +#define ACPI_RASF_SCI_DOORBELL (1<<1) +#define ACPI_RASF_ERROR (1<<2) +#define ACPI_RASF_STATUS (0x1F<<3) + +/* Reset to default packing */ + +#pragma pack() + +#endif /* __ACTBL3_H__ */ -- cgit v1.2.3 From ffef68273b6278e98a99dd4051671d4854b20fe0 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Wed, 16 Nov 2011 11:08:30 +0800 Subject: ACPI 5.0: New interfaces to allow driver access to AML mutex objects Adds acpi_acquire_mutex, acpi_release_mutex external interfaces. New file, utxfmutex.c. Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown --- drivers/acpi/acpica/Makefile | 2 +- drivers/acpi/acpica/utxfmutex.c | 187 ++++++++++++++++++++++++++++++++++++++++ include/acpi/acpixf.h | 15 +++- 3 files changed, 201 insertions(+), 3 deletions(-) create mode 100644 drivers/acpi/acpica/utxfmutex.c (limited to 'include/acpi') diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 301bd2d388ad..1bd466113dc8 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -45,4 +45,4 @@ acpi-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \ utcopy.o utdelete.o utglobal.o utmath.o utobject.o \ utstate.o utmutex.o utobject.o utresrc.o utlock.o utids.o \ - utosi.o utxferror.o utdecode.o + utosi.o utxferror.o utdecode.o utxfmutex.o diff --git a/drivers/acpi/acpica/utxfmutex.c b/drivers/acpi/acpica/utxfmutex.c new file mode 100644 index 000000000000..1ea016b228bd --- /dev/null +++ b/drivers/acpi/acpica/utxfmutex.c @@ -0,0 +1,187 @@ +/******************************************************************************* + * + * Module Name: utxfmutex - external AML mutex access functions + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2011, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" +#include "acnamesp.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utxfmutex") + +/* Local prototypes */ +static acpi_status +acpi_ut_get_mutex_object(acpi_handle handle, + acpi_string pathname, + union acpi_operand_object **ret_obj); + +/******************************************************************************* + * + * FUNCTION: acpi_ut_get_mutex_object + * + * PARAMETERS: Handle - Mutex or prefix handle (optional) + * Pathname - Mutex pathname (optional) + * ret_obj - Where the mutex object is returned + * + * RETURN: Status + * + * DESCRIPTION: Get an AML mutex object. The mutex node is pointed to by + * Handle:Pathname. Either Handle or Pathname can be NULL, but + * not both. + * + ******************************************************************************/ + +static acpi_status +acpi_ut_get_mutex_object(acpi_handle handle, + acpi_string pathname, + union acpi_operand_object **ret_obj) +{ + struct acpi_namespace_node *mutex_node; + union acpi_operand_object *mutex_obj; + acpi_status status; + + /* Parameter validation */ + + if (!ret_obj || (!handle && !pathname)) { + return (AE_BAD_PARAMETER); + } + + /* Get a the namespace node for the mutex */ + + mutex_node = handle; + if (pathname != NULL) { + status = acpi_get_handle(handle, pathname, + ACPI_CAST_PTR(acpi_handle, + &mutex_node)); + if (ACPI_FAILURE(status)) { + return (status); + } + } + + /* Ensure that we actually have a Mutex object */ + + if (!mutex_node || (mutex_node->type != ACPI_TYPE_MUTEX)) { + return (AE_TYPE); + } + + /* Get the low-level mutex object */ + + mutex_obj = acpi_ns_get_attached_object(mutex_node); + if (!mutex_obj) { + return (AE_NULL_OBJECT); + } + + *ret_obj = mutex_obj; + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_acquire_mutex + * + * PARAMETERS: Handle - Mutex or prefix handle (optional) + * Pathname - Mutex pathname (optional) + * Timeout - Max time to wait for the lock (millisec) + * + * RETURN: Status + * + * DESCRIPTION: Acquire an AML mutex. This is a device driver interface to + * AML mutex objects, and allows for transaction locking between + * drivers and AML code. The mutex node is pointed to by + * Handle:Pathname. Either Handle or Pathname can be NULL, but + * not both. + * + ******************************************************************************/ + +acpi_status +acpi_acquire_mutex(acpi_handle handle, acpi_string pathname, u16 timeout) +{ + acpi_status status; + union acpi_operand_object *mutex_obj; + + /* Get the low-level mutex associated with Handle:Pathname */ + + status = acpi_ut_get_mutex_object(handle, pathname, &mutex_obj); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Acquire the OS mutex */ + + status = acpi_os_acquire_mutex(mutex_obj->mutex.os_mutex, timeout); + return (status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_release_mutex + * + * PARAMETERS: Handle - Mutex or prefix handle (optional) + * Pathname - Mutex pathname (optional) + * + * RETURN: Status + * + * DESCRIPTION: Release an AML mutex. This is a device driver interface to + * AML mutex objects, and allows for transaction locking between + * drivers and AML code. The mutex node is pointed to by + * Handle:Pathname. Either Handle or Pathname can be NULL, but + * not both. + * + ******************************************************************************/ + +acpi_status acpi_release_mutex(acpi_handle handle, acpi_string pathname) +{ + acpi_status status; + union acpi_operand_object *mutex_obj; + + /* Get the low-level mutex associated with Handle:Pathname */ + + status = acpi_ut_get_mutex_object(handle, pathname, &mutex_obj); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Release the OS mutex */ + + acpi_os_release_mutex(mutex_obj->mutex.os_mutex); + return (AE_OK); +} diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 9ba2e3aff5c6..dd86610039b3 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -277,12 +277,23 @@ acpi_status acpi_install_exception_handler(acpi_exception_handler handler); acpi_status acpi_install_interface_handler(acpi_interface_handler handler); /* - * Event interfaces + * Global Lock interfaces */ acpi_status acpi_acquire_global_lock(u16 timeout, u32 * handle); acpi_status acpi_release_global_lock(u32 handle); +/* + * Interfaces to AML mutex objects + */ +acpi_status +acpi_acquire_mutex(acpi_handle handle, acpi_string pathname, u16 timeout); + +acpi_status acpi_release_mutex(acpi_handle handle, acpi_string pathname); + +/* + * Fixed Event interfaces + */ acpi_status acpi_enable_event(u32 event, u32 flags); acpi_status acpi_disable_event(u32 event, u32 flags); @@ -292,7 +303,7 @@ acpi_status acpi_clear_event(u32 event); acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status); /* - * GPE Interfaces + * General Purpose Event (GPE) Interfaces */ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number); -- cgit v1.2.3 From 9ce81784c9c0396a6a6be05248928a71134fe60b Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 16 Nov 2011 13:39:07 +0800 Subject: ACPI 5.0: Implement Connection() and AccessAs() changes Support within the interpreter and operation region dispatch. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acevents.h | 1 + drivers/acpi/acpica/aclocal.h | 6 +- drivers/acpi/acpica/acobject.h | 5 +- drivers/acpi/acpica/acopcode.h | 4 ++ drivers/acpi/acpica/amlcode.h | 10 +++ drivers/acpi/acpica/dsfield.c | 81 ++++++++++++++++++----- drivers/acpi/acpica/evregion.c | 29 ++++++++- drivers/acpi/acpica/exconfig.c | 6 +- drivers/acpi/acpica/exdump.c | 7 +- drivers/acpi/acpica/exfldio.c | 11 ++-- drivers/acpi/acpica/exprep.c | 25 ++++++++ drivers/acpi/acpica/psargs.c | 141 +++++++++++++++++++++++++++++++++++++---- drivers/acpi/acpica/psopcode.c | 13 +++- drivers/acpi/acpica/pstree.c | 6 ++ include/acpi/actypes.h | 8 +++ 15 files changed, 308 insertions(+), 45 deletions(-) (limited to 'include/acpi') diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index bea3b4899183..f763b88ed772 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -162,6 +162,7 @@ acpi_status acpi_ev_initialize_op_regions(void); acpi_status acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, + union acpi_operand_object *field_obj, u32 function, u32 region_offset, u32 bit_width, u64 *value); diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 5552125d8340..52c4ebddbcf1 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -53,7 +53,7 @@ typedef u32 acpi_mutex_handle; /* Total number of aml opcodes defined */ -#define AML_NUM_OPCODES 0x7F +#define AML_NUM_OPCODES 0x81 /* Forward declarations */ @@ -249,12 +249,16 @@ struct acpi_create_field_info { struct acpi_namespace_node *field_node; struct acpi_namespace_node *register_node; struct acpi_namespace_node *data_register_node; + struct acpi_namespace_node *connection_node; + u8 *resource_buffer; u32 bank_value; u32 field_bit_position; u32 field_bit_length; + u16 resource_length; u8 field_flags; u8 attribute; u8 field_type; + u8 access_length; }; typedef diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h index 6d276c20b57b..435dd2f847bb 100644 --- a/drivers/acpi/acpica/acobject.h +++ b/drivers/acpi/acpica/acobject.h @@ -254,6 +254,7 @@ ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_NOTIFY_INFO}; u32 base_byte_offset; /* Byte offset within containing object */\ u32 value; /* Value to store into the Bank or Index register */\ u8 start_field_bit_offset;/* Bit offset within first field datum (0-63) */\ + u8 access_length; /* For serial regions/fields */ struct acpi_object_field_common { /* COMMON FIELD (for BUFFER, REGION, BANK, and INDEX fields) */ @@ -261,7 +262,9 @@ struct acpi_object_field_common { /* COMMON FIELD (for BUFFER, REGION, BANK, and }; struct acpi_object_region_field { - ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_FIELD_INFO union acpi_operand_object *region_obj; /* Containing op_region object */ + ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_FIELD_INFO u16 resource_length; + union acpi_operand_object *region_obj; /* Containing op_region object */ + u8 *resource_buffer; /* resource_template for serial regions/fields */ }; struct acpi_object_bank_field { diff --git a/drivers/acpi/acpica/acopcode.h b/drivers/acpi/acpica/acopcode.h index bb2ccfad7376..9896c77e94f9 100644 --- a/drivers/acpi/acpica/acopcode.h +++ b/drivers/acpi/acpica/acopcode.h @@ -93,6 +93,7 @@ #define ARGP_CONCAT_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) #define ARGP_CONCAT_RES_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) #define ARGP_COND_REF_OF_OP ARGP_LIST2 (ARGP_SUPERNAME, ARGP_SUPERNAME) +#define ARGP_CONNECTFIELD_OP ARGP_LIST1 (ARGP_NAMESTRING) #define ARGP_CONTINUE_OP ARG_NONE #define ARGP_COPY_OP ARGP_LIST2 (ARGP_TERMARG, ARGP_SIMPLENAME) #define ARGP_CREATE_BIT_FIELD_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_NAME) @@ -164,6 +165,7 @@ #define ARGP_RETURN_OP ARGP_LIST1 (ARGP_TERMARG) #define ARGP_REVISION_OP ARG_NONE #define ARGP_SCOPE_OP ARGP_LIST3 (ARGP_PKGLENGTH, ARGP_NAME, ARGP_TERMLIST) +#define ARGP_SERIALFIELD_OP ARGP_LIST1 (ARGP_NAMESTRING) #define ARGP_SHIFT_LEFT_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) #define ARGP_SHIFT_RIGHT_OP ARGP_LIST3 (ARGP_TERMARG, ARGP_TERMARG, ARGP_TARGET) #define ARGP_SIGNAL_OP ARGP_LIST1 (ARGP_SUPERNAME) @@ -223,6 +225,7 @@ #define ARGI_CONCAT_OP ARGI_LIST3 (ARGI_COMPUTEDATA,ARGI_COMPUTEDATA, ARGI_TARGETREF) #define ARGI_CONCAT_RES_OP ARGI_LIST3 (ARGI_BUFFER, ARGI_BUFFER, ARGI_TARGETREF) #define ARGI_COND_REF_OF_OP ARGI_LIST2 (ARGI_OBJECT_REF, ARGI_TARGETREF) +#define ARGI_CONNECTFIELD_OP ARGI_INVALID_OPCODE #define ARGI_CONTINUE_OP ARGI_INVALID_OPCODE #define ARGI_COPY_OP ARGI_LIST2 (ARGI_ANYTYPE, ARGI_SIMPLE_TARGET) #define ARGI_CREATE_BIT_FIELD_OP ARGI_LIST3 (ARGI_BUFFER, ARGI_INTEGER, ARGI_REFERENCE) @@ -294,6 +297,7 @@ #define ARGI_RETURN_OP ARGI_INVALID_OPCODE #define ARGI_REVISION_OP ARG_NONE #define ARGI_SCOPE_OP ARGI_INVALID_OPCODE +#define ARGI_SERIALFIELD_OP ARGI_INVALID_OPCODE #define ARGI_SHIFT_LEFT_OP ARGI_LIST3 (ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF) #define ARGI_SHIFT_RIGHT_OP ARGI_LIST3 (ARGI_INTEGER, ARGI_INTEGER, ARGI_TARGETREF) #define ARGI_SIGNAL_OP ARGI_LIST1 (ARGI_EVENT) diff --git a/drivers/acpi/acpica/amlcode.h b/drivers/acpi/acpica/amlcode.h index 1077f17859ed..adf7a71ea766 100644 --- a/drivers/acpi/acpica/amlcode.h +++ b/drivers/acpi/acpica/amlcode.h @@ -188,6 +188,14 @@ #define AML_LLESSEQUAL_OP (u16) 0x9294 #define AML_LNOTEQUAL_OP (u16) 0x9293 +/* + * Opcodes for "Field" operators + */ +#define AML_FIELD_OFFSET_OP (u8) 0x00 +#define AML_FIELD_ACCESS_OP (u8) 0x01 +#define AML_FIELD_CONNECTION_OP (u8) 0x02 /* ACPI 5.0 */ +#define AML_FIELD_EXT_ACCESS_OP (u8) 0x03 /* ACPI 5.0 */ + /* * Internal opcodes * Use only "Unknown" AML opcodes, don't attempt to use @@ -202,6 +210,8 @@ #define AML_INT_METHODCALL_OP (u16) 0x0035 #define AML_INT_RETURN_VALUE_OP (u16) 0x0036 #define AML_INT_EVAL_SUBTREE_OP (u16) 0x0037 +#define AML_INT_CONNECTION_OP (u16) 0x0038 +#define AML_INT_EXTACCESSFIELD_OP (u16) 0x0039 #define ARG_NONE 0x0 diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c index 34be60c0e448..aa880d992984 100644 --- a/drivers/acpi/acpica/dsfield.c +++ b/drivers/acpi/acpica/dsfield.c @@ -221,6 +221,7 @@ acpi_ds_get_field_names(struct acpi_create_field_info *info, { acpi_status status; u64 position; + union acpi_parse_object *child; ACPI_FUNCTION_TRACE_PTR(ds_get_field_names, info); @@ -232,10 +233,11 @@ acpi_ds_get_field_names(struct acpi_create_field_info *info, while (arg) { /* - * Three types of field elements are handled: - * 1) Offset - specifies a bit offset - * 2) access_as - changes the access mode - * 3) Name - Enters a new named field into the namespace + * Four types of field elements are handled: + * 1) Name - Enters a new named field into the namespace + * 2) Offset - specifies a bit offset + * 3) access_as - changes the access mode/attributes + * 4) Connection - Associate a resource template with the field */ switch (arg->common.aml_opcode) { case AML_INT_RESERVEDFIELD_OP: @@ -253,21 +255,70 @@ acpi_ds_get_field_names(struct acpi_create_field_info *info, break; case AML_INT_ACCESSFIELD_OP: - + case AML_INT_EXTACCESSFIELD_OP: /* - * Get a new access_type and access_attribute -- to be used for all - * field units that follow, until field end or another access_as - * keyword. + * Get new access_type, access_attribute, and access_length fields + * -- to be used for all field units that follow, until the + * end-of-field or another access_as keyword is encountered. + * NOTE. These three bytes are encoded in the integer value + * of the parseop for convenience. * * In field_flags, preserve the flag bits other than the - * ACCESS_TYPE bits + * ACCESS_TYPE bits. */ + + /* access_type (byte_acc, word_acc, etc.) */ + info->field_flags = (u8) ((info-> field_flags & ~(AML_FIELD_ACCESS_TYPE_MASK)) | - ((u8) ((u32) arg->common.value.integer >> 8))); + ((u8)((u32)(arg->common.value.integer & 0x07)))); + + /* access_attribute (attrib_quick, attrib_byte, etc.) */ + + info->attribute = + (u8)((arg->common.value.integer >> 8) & 0xFF); + + /* access_length (for serial/buffer protocols) */ + + info->access_length = + (u8)((arg->common.value.integer >> 16) & 0xFF); + break; + + case AML_INT_CONNECTION_OP: + /* + * Clear any previous connection. New connection is used for all + * fields that follow, similar to access_as + */ + info->resource_buffer = NULL; + info->connection_node = NULL; - info->attribute = (u8) (arg->common.value.integer); + /* + * A Connection() is either an actual resource descriptor (buffer) + * or a named reference to a resource template + */ + child = arg->common.value.arg; + if (child->common.aml_opcode == AML_INT_BYTELIST_OP) { + info->resource_buffer = child->named.data; + info->resource_length = + (u16)child->named.value.integer; + } else { + /* Lookup the Connection() namepath, it should already exist */ + + status = acpi_ns_lookup(walk_state->scope_info, + child->common.value. + name, ACPI_TYPE_ANY, + ACPI_IMODE_EXECUTE, + ACPI_NS_DONT_OPEN_SCOPE, + walk_state, + &info->connection_node); + if (ACPI_FAILURE(status)) { + ACPI_ERROR_NAMESPACE(child->common. + value.name, + status); + return_ACPI_STATUS(status); + } + } break; case AML_INT_NAMEDFIELD_OP: @@ -374,6 +425,8 @@ acpi_ds_create_field(union acpi_parse_object *op, } } + ACPI_MEMSET(&info, 0, sizeof(struct acpi_create_field_info)); + /* Second arg is the field flags */ arg = arg->common.next; @@ -386,7 +439,6 @@ acpi_ds_create_field(union acpi_parse_object *op, info.region_node = region_node; status = acpi_ds_get_field_names(&info, walk_state, arg->common.next); - return_ACPI_STATUS(status); } @@ -474,8 +526,8 @@ acpi_ds_init_field_objects(union acpi_parse_object *op, */ while (arg) { /* - * Ignore OFFSET and ACCESSAS terms here; we are only interested in the - * field names in order to enter them into the namespace. + * Ignore OFFSET/ACCESSAS/CONNECTION terms here; we are only interested + * in the field names in order to enter them into the namespace. */ if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) { status = acpi_ns_lookup(walk_state->scope_info, @@ -651,6 +703,5 @@ acpi_ds_create_index_field(union acpi_parse_object *op, info.region_node = region_node; status = acpi_ds_get_field_names(&info, walk_state, arg->common.next); - return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c index f0edf5c43c03..dcdc7e4a285e 100644 --- a/drivers/acpi/acpica/evregion.c +++ b/drivers/acpi/acpica/evregion.c @@ -329,6 +329,7 @@ acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function) * FUNCTION: acpi_ev_address_space_dispatch * * PARAMETERS: region_obj - Internal region object + * field_obj - Corresponding field. Can be NULL. * Function - Read or Write operation * region_offset - Where in the region to read or write * bit_width - Field width in bits (8, 16, 32, or 64) @@ -344,6 +345,7 @@ acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function) acpi_status acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, + union acpi_operand_object *field_obj, u32 function, u32 region_offset, u32 bit_width, u64 *value) { @@ -353,6 +355,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, union acpi_operand_object *handler_desc; union acpi_operand_object *region_obj2; void *region_context = NULL; + struct acpi_connection_info *context; ACPI_FUNCTION_TRACE(ev_address_space_dispatch); @@ -375,6 +378,8 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, return_ACPI_STATUS(AE_NOT_EXIST); } + context = handler_desc->address_space.context; + /* * It may be the case that the region has never been initialized. * Some types of regions require special init code @@ -404,8 +409,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, acpi_ex_exit_interpreter(); status = region_setup(region_obj, ACPI_REGION_ACTIVATE, - handler_desc->address_space.context, - ®ion_context); + context, ®ion_context); /* Re-enter the interpreter */ @@ -455,6 +459,25 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, acpi_ut_get_region_name(region_obj->region. space_id))); + /* + * Special handling for generic_serial_bus and general_purpose_io: + * There are three extra parameters that must be passed to the + * handler via the context: + * 1) Connection buffer, a resource template from Connection() op. + * 2) Length of the above buffer. + * 3) Actual access length from the access_as() op. + */ + if (((region_obj->region.space_id == ACPI_ADR_SPACE_GSBUS) || + (region_obj->region.space_id == ACPI_ADR_SPACE_GPIO)) && + context && field_obj) { + + /* Get the Connection (resource_template) buffer */ + + context->connection = field_obj->field.resource_buffer; + context->length = field_obj->field.resource_length; + context->access_length = field_obj->field.access_length; + } + if (!(handler_desc->address_space.handler_flags & ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) { /* @@ -469,7 +492,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj, status = handler(function, (region_obj->region.address + region_offset), - bit_width, value, handler_desc->address_space.context, + bit_width, value, context, region_obj2->extra.region_context); if (ACPI_FAILURE(status)) { diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c index 745a42b401f5..efe41f736fab 100644 --- a/drivers/acpi/acpica/exconfig.c +++ b/drivers/acpi/acpica/exconfig.c @@ -297,9 +297,9 @@ acpi_ex_region_read(union acpi_operand_object *obj_desc, u32 length, u8 *buffer) /* Bytewise reads */ for (i = 0; i < length; i++) { - status = acpi_ev_address_space_dispatch(obj_desc, ACPI_READ, - region_offset, 8, - &value); + status = + acpi_ev_address_space_dispatch(obj_desc, NULL, ACPI_READ, + region_offset, 8, &value); if (ACPI_FAILURE(status)) { return status; } diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c index 61b8c0e8b74d..c7064f4d4704 100644 --- a/drivers/acpi/acpica/exdump.c +++ b/drivers/acpi/acpica/exdump.c @@ -192,10 +192,13 @@ static struct acpi_exdump_info acpi_ex_dump_buffer_field[3] = { "Buffer Object"} }; -static struct acpi_exdump_info acpi_ex_dump_region_field[3] = { +static struct acpi_exdump_info acpi_ex_dump_region_field[5] = { {ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_region_field), NULL}, {ACPI_EXD_FIELD, 0, NULL}, - {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(field.region_obj), "Region Object"} + {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(field.access_length), "AccessLength"}, + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(field.region_obj), "Region Object"}, + {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(field.resource_buffer), + "ResourceBuffer"} }; static struct acpi_exdump_info acpi_ex_dump_bank_field[5] = { diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c index 2a524fc1e851..cc9c5dfa4c45 100644 --- a/drivers/acpi/acpica/exfldio.c +++ b/drivers/acpi/acpica/exfldio.c @@ -283,11 +283,12 @@ acpi_ex_access_region(union acpi_operand_object *obj_desc, /* Invoke the appropriate address_space/op_region handler */ - status = - acpi_ev_address_space_dispatch(rgn_desc, function, region_offset, - ACPI_MUL_8(obj_desc->common_field. - access_byte_width), - value); + status = acpi_ev_address_space_dispatch(rgn_desc, obj_desc, + function, region_offset, + ACPI_MUL_8(obj_desc-> + common_field. + access_byte_width), + value); if (ACPI_FAILURE(status)) { if (status == AE_NOT_IMPLEMENTED) { diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c index cc95e2000406..18b75fed626e 100644 --- a/drivers/acpi/acpica/exprep.c +++ b/drivers/acpi/acpica/exprep.c @@ -47,6 +47,7 @@ #include "acinterp.h" #include "amlcode.h" #include "acnamesp.h" +#include "acdispat.h" #define _COMPONENT ACPI_EXECUTER ACPI_MODULE_NAME("exprep") @@ -455,6 +456,30 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info) obj_desc->field.region_obj = acpi_ns_get_attached_object(info->region_node); + /* Fields specific to generic_serial_bus fields */ + + obj_desc->field.access_length = info->access_length; + + if (info->connection_node) { + second_desc = info->connection_node->object; + if (!(second_desc->common.flags & AOPOBJ_DATA_VALID)) { + status = + acpi_ds_get_buffer_arguments(second_desc); + if (ACPI_FAILURE(status)) { + acpi_ut_delete_object_desc(obj_desc); + return_ACPI_STATUS(status); + } + } + + obj_desc->field.resource_buffer = + second_desc->buffer.pointer; + obj_desc->field.resource_length = + (u16)second_desc->buffer.length; + } else if (info->resource_buffer) { + obj_desc->field.resource_buffer = info->resource_buffer; + obj_desc->field.resource_length = info->resource_length; + } + /* Allow full data read from EC address space */ if ((obj_desc->field.region_obj->region.space_id == diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c index e1fad0ee0136..4037f9032481 100644 --- a/drivers/acpi/acpica/psargs.c +++ b/drivers/acpi/acpica/psargs.c @@ -484,34 +484,54 @@ acpi_ps_get_next_simple_arg(struct acpi_parse_state *parser_state, static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state *parser_state) { - u32 aml_offset = (u32) - ACPI_PTR_DIFF(parser_state->aml, - parser_state->aml_start); + u32 aml_offset; union acpi_parse_object *field; + union acpi_parse_object *arg = NULL; u16 opcode; u32 name; + u8 access_type; + u8 access_attribute; + u8 access_length; + u32 pkg_length; + u8 *pkg_end; + u32 buffer_length; ACPI_FUNCTION_TRACE(ps_get_next_field); + aml_offset = + (u32)ACPI_PTR_DIFF(parser_state->aml, parser_state->aml_start); + /* Determine field type */ switch (ACPI_GET8(parser_state->aml)) { - default: + case AML_FIELD_OFFSET_OP: - opcode = AML_INT_NAMEDFIELD_OP; + opcode = AML_INT_RESERVEDFIELD_OP; + parser_state->aml++; break; - case 0x00: + case AML_FIELD_ACCESS_OP: - opcode = AML_INT_RESERVEDFIELD_OP; + opcode = AML_INT_ACCESSFIELD_OP; parser_state->aml++; break; - case 0x01: + case AML_FIELD_CONNECTION_OP: - opcode = AML_INT_ACCESSFIELD_OP; + opcode = AML_INT_CONNECTION_OP; + parser_state->aml++; + break; + + case AML_FIELD_EXT_ACCESS_OP: + + opcode = AML_INT_EXTACCESSFIELD_OP; parser_state->aml++; break; + + default: + + opcode = AML_INT_NAMEDFIELD_OP; + break; } /* Allocate a new field op */ @@ -549,16 +569,111 @@ static union acpi_parse_object *acpi_ps_get_next_field(struct acpi_parse_state break; case AML_INT_ACCESSFIELD_OP: + case AML_INT_EXTACCESSFIELD_OP: /* * Get access_type and access_attrib and merge into the field Op - * access_type is first operand, access_attribute is second + * access_type is first operand, access_attribute is second. stuff + * these bytes into the node integer value for convenience. */ - field->common.value.integer = - (((u32) ACPI_GET8(parser_state->aml) << 8)); + + /* Get the two bytes (Type/Attribute) */ + + access_type = ACPI_GET8(parser_state->aml); parser_state->aml++; - field->common.value.integer |= ACPI_GET8(parser_state->aml); + access_attribute = ACPI_GET8(parser_state->aml); parser_state->aml++; + + field->common.value.integer = (u8)access_type; + field->common.value.integer |= (u16)(access_attribute << 8); + + /* This opcode has a third byte, access_length */ + + if (opcode == AML_INT_EXTACCESSFIELD_OP) { + access_length = ACPI_GET8(parser_state->aml); + parser_state->aml++; + + field->common.value.integer |= + (u32)(access_length << 16); + } + break; + + case AML_INT_CONNECTION_OP: + + /* + * Argument for Connection operator can be either a Buffer + * (resource descriptor), or a name_string. + */ + if (ACPI_GET8(parser_state->aml) == AML_BUFFER_OP) { + parser_state->aml++; + + pkg_end = parser_state->aml; + pkg_length = + acpi_ps_get_next_package_length(parser_state); + pkg_end += pkg_length; + + if (parser_state->aml < pkg_end) { + + /* Non-empty list */ + + arg = acpi_ps_alloc_op(AML_INT_BYTELIST_OP); + if (!arg) { + return_PTR(NULL); + } + + /* Get the actual buffer length argument */ + + opcode = ACPI_GET8(parser_state->aml); + parser_state->aml++; + + switch (opcode) { + case AML_BYTE_OP: /* AML_BYTEDATA_ARG */ + buffer_length = + ACPI_GET8(parser_state->aml); + parser_state->aml += 1; + break; + + case AML_WORD_OP: /* AML_WORDDATA_ARG */ + buffer_length = + ACPI_GET16(parser_state->aml); + parser_state->aml += 2; + break; + + case AML_DWORD_OP: /* AML_DWORDATA_ARG */ + buffer_length = + ACPI_GET32(parser_state->aml); + parser_state->aml += 4; + break; + + default: + buffer_length = 0; + break; + } + + /* Fill in bytelist data */ + + arg->named.value.size = buffer_length; + arg->named.data = parser_state->aml; + } + + /* Skip to End of byte data */ + + parser_state->aml = pkg_end; + } else { + arg = acpi_ps_alloc_op(AML_INT_NAMEPATH_OP); + if (!arg) { + return_PTR(NULL); + } + + /* Get the Namestring argument */ + + arg->common.value.name = + acpi_ps_get_next_namestring(parser_state); + } + + /* Link the buffer/namestring to parent (CONNECTION_OP) */ + + acpi_ps_append_arg(field, arg); break; default: diff --git a/drivers/acpi/acpica/psopcode.c b/drivers/acpi/acpica/psopcode.c index bed08de7528c..9b3191001b3d 100644 --- a/drivers/acpi/acpica/psopcode.c +++ b/drivers/acpi/acpica/psopcode.c @@ -638,7 +638,16 @@ const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES] = { /* 7E */ ACPI_OP("Timer", ARGP_TIMER_OP, ARGI_TIMER_OP, ACPI_TYPE_ANY, AML_CLASS_EXECUTE, AML_TYPE_EXEC_0A_0T_1R, - AML_FLAGS_EXEC_0A_0T_1R) + AML_FLAGS_EXEC_0A_0T_1R), + +/* ACPI 5.0 opcodes */ + +/* 7F */ ACPI_OP("-ConnectField-", ARGP_CONNECTFIELD_OP, + ARGI_CONNECTFIELD_OP, ACPI_TYPE_ANY, + AML_CLASS_INTERNAL, AML_TYPE_BOGUS, AML_HAS_ARGS), +/* 80 */ ACPI_OP("-ExtAccessField-", ARGP_CONNECTFIELD_OP, + ARGI_CONNECTFIELD_OP, ACPI_TYPE_ANY, + AML_CLASS_INTERNAL, AML_TYPE_BOGUS, 0) /*! [End] no source code translation !*/ }; @@ -657,7 +666,7 @@ static const u8 acpi_gbl_short_op_index[256] = { /* 0x20 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, /* 0x28 */ _UNK, _UNK, _UNK, _UNK, _UNK, 0x63, _PFX, _PFX, /* 0x30 */ 0x67, 0x66, 0x68, 0x65, 0x69, 0x64, 0x6A, 0x7D, -/* 0x38 */ _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, +/* 0x38 */ 0x7F, 0x80, _UNK, _UNK, _UNK, _UNK, _UNK, _UNK, /* 0x40 */ _UNK, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, /* 0x48 */ _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, /* 0x50 */ _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, _ASC, diff --git a/drivers/acpi/acpica/pstree.c b/drivers/acpi/acpica/pstree.c index f1464c03aa42..04311bbfcccb 100644 --- a/drivers/acpi/acpica/pstree.c +++ b/drivers/acpi/acpica/pstree.c @@ -74,6 +74,12 @@ union acpi_parse_object *acpi_ps_get_arg(union acpi_parse_object *op, u32 argn) ACPI_FUNCTION_ENTRY(); +/* + if (Op->Common.aml_opcode == AML_INT_CONNECTION_OP) + { + return (Op->Common.Value.Arg); + } +*/ /* Get the info structure for this opcode */ op_info = acpi_ps_get_opcode_info(op->common.aml_opcode); diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index ed73f6705c86..d088c902d6bd 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -957,6 +957,14 @@ acpi_status(*acpi_adr_space_handler) (u32 function, #define ACPI_DEFAULT_HANDLER NULL +/* Special Context data for generic_serial_bus/general_purpose_io (ACPI 5.0) */ + +struct acpi_connection_info { + u8 *connection; + u16 length; + u8 access_length; +}; + typedef acpi_status(*acpi_adr_space_setup) (acpi_handle region_handle, u32 function, -- cgit v1.2.3 From 2da120b6847f85c406f9afa13853e2755684389e Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 16 Nov 2011 14:14:32 +0800 Subject: ACPI 5.0: Support for GeneralPurposeIo and GenericSerialBus operation region Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acconfig.h | 3 ++- drivers/acpi/acpica/amlcode.h | 17 ++++++++++------- drivers/acpi/acpica/exfield.c | 28 +++++++++++++++++++++------- drivers/acpi/acpica/exfldio.c | 3 ++- drivers/acpi/acpica/utdecode.c | 4 +++- include/acpi/actypes.h | 4 +++- 6 files changed, 41 insertions(+), 18 deletions(-) (limited to 'include/acpi') diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index f895a244ca7e..f467d49c1ace 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -202,9 +202,10 @@ #define ACPI_RSDP_CHECKSUM_LENGTH 20 #define ACPI_RSDP_XCHECKSUM_LENGTH 36 -/* SMBus and IPMI bidirectional buffer size */ +/* SMBus, GSBus and IPMI bidirectional buffer size */ #define ACPI_SMBUS_BUFFER_SIZE 34 +#define ACPI_GSBUS_BUFFER_SIZE 34 #define ACPI_IPMI_BUFFER_SIZE 66 /* _sx_d and _sx_w control methods */ diff --git a/drivers/acpi/acpica/amlcode.h b/drivers/acpi/acpica/amlcode.h index adf7a71ea766..c7db80ee61ae 100644 --- a/drivers/acpi/acpica/amlcode.h +++ b/drivers/acpi/acpica/amlcode.h @@ -466,13 +466,16 @@ typedef enum { * access_as keyword */ typedef enum { - AML_FIELD_ATTRIB_SMB_QUICK = 0x02, - AML_FIELD_ATTRIB_SMB_SEND_RCV = 0x04, - AML_FIELD_ATTRIB_SMB_BYTE = 0x06, - AML_FIELD_ATTRIB_SMB_WORD = 0x08, - AML_FIELD_ATTRIB_SMB_BLOCK = 0x0A, - AML_FIELD_ATTRIB_SMB_WORD_CALL = 0x0C, - AML_FIELD_ATTRIB_SMB_BLOCK_CALL = 0x0D + AML_FIELD_ATTRIB_QUICK = 0x02, + AML_FIELD_ATTRIB_SEND_RCV = 0x04, + AML_FIELD_ATTRIB_BYTE = 0x06, + AML_FIELD_ATTRIB_WORD = 0x08, + AML_FIELD_ATTRIB_BLOCK = 0x0A, + AML_FIELD_ATTRIB_MULTIBYTE = 0x0B, + AML_FIELD_ATTRIB_WORD_CALL = 0x0C, + AML_FIELD_ATTRIB_BLOCK_CALL = 0x0D, + AML_FIELD_ATTRIB_RAW_BYTES = 0x0E, + AML_FIELD_ATTRIB_RAW_PROCESS = 0x0F } AML_ACCESS_ATTRIBUTE; /* Bit fields in the AML method_flags byte */ diff --git a/drivers/acpi/acpica/exfield.c b/drivers/acpi/acpica/exfield.c index 0bde2230c028..3aeec028d71c 100644 --- a/drivers/acpi/acpica/exfield.c +++ b/drivers/acpi/acpica/exfield.c @@ -100,18 +100,25 @@ acpi_ex_read_data_from_field(struct acpi_walk_state *walk_state, (obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_SMBUS || obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_GSBUS + || obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_IPMI)) { /* - * This is an SMBus or IPMI read. We must create a buffer to hold + * This is an SMBus, GSBus or IPMI read. We must create a buffer to hold * the data and then directly access the region handler. * - * Note: Smbus protocol value is passed in upper 16-bits of Function + * Note: SMBus and GSBus protocol value is passed in upper 16-bits of Function */ if (obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_SMBUS) { length = ACPI_SMBUS_BUFFER_SIZE; function = ACPI_READ | (obj_desc->field.attribute << 16); + } else if (obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_GSBUS) { + length = ACPI_GSBUS_BUFFER_SIZE; + function = + ACPI_READ | (obj_desc->field.attribute << 16); } else { /* IPMI */ length = ACPI_IPMI_BUFFER_SIZE; @@ -248,21 +255,23 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, (obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_SMBUS || obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_GSBUS + || obj_desc->field.region_obj->region.space_id == ACPI_ADR_SPACE_IPMI)) { /* - * This is an SMBus or IPMI write. We will bypass the entire field + * This is an SMBus, GSBus or IPMI write. We will bypass the entire field * mechanism and handoff the buffer directly to the handler. For * these address spaces, the buffer is bi-directional; on a write, * return data is returned in the same buffer. * * Source must be a buffer of sufficient size: - * ACPI_SMBUS_BUFFER_SIZE or ACPI_IPMI_BUFFER_SIZE. + * ACPI_SMBUS_BUFFER_SIZE, ACPI_GSBUS_BUFFER_SIZE, or ACPI_IPMI_BUFFER_SIZE. * - * Note: SMBus protocol type is passed in upper 16-bits of Function + * Note: SMBus and GSBus protocol type is passed in upper 16-bits of Function */ if (source_desc->common.type != ACPI_TYPE_BUFFER) { ACPI_ERROR((AE_INFO, - "SMBus or IPMI write requires Buffer, found type %s", + "SMBus/IPMI/GenericSerialBus write requires Buffer, found type %s", acpi_ut_get_object_type_name(source_desc))); return_ACPI_STATUS(AE_AML_OPERAND_TYPE); @@ -273,6 +282,11 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, length = ACPI_SMBUS_BUFFER_SIZE; function = ACPI_WRITE | (obj_desc->field.attribute << 16); + } else if (obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_GSBUS) { + length = ACPI_GSBUS_BUFFER_SIZE; + function = + ACPI_WRITE | (obj_desc->field.attribute << 16); } else { /* IPMI */ length = ACPI_IPMI_BUFFER_SIZE; @@ -281,7 +295,7 @@ acpi_ex_write_data_to_field(union acpi_operand_object *source_desc, if (source_desc->buffer.length < length) { ACPI_ERROR((AE_INFO, - "SMBus or IPMI write requires Buffer of length %u, found length %u", + "SMBus/IPMI/GenericSerialBus write requires Buffer of length %u, found length %u", length, source_desc->buffer.length)); return_ACPI_STATUS(AE_AML_BUFFER_LIMIT); diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c index cc9c5dfa4c45..5b76c11418fa 100644 --- a/drivers/acpi/acpica/exfldio.c +++ b/drivers/acpi/acpica/exfldio.c @@ -131,10 +131,11 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc, } /* - * Exit now for SMBus or IPMI address space, it has a non-linear + * Exit now for SMBus, GSBus or IPMI address space, it has a non-linear * address space and the request cannot be directly validated */ if (space_id == ACPI_ADR_SPACE_SMBUS || + space_id == ACPI_ADR_SPACE_GSBUS || space_id == ACPI_ADR_SPACE_IPMI) { /* SMBus or IPMI has a non-linear address space */ diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c index 8b087e2d64f4..6fd56d549296 100644 --- a/drivers/acpi/acpica/utdecode.c +++ b/drivers/acpi/acpica/utdecode.c @@ -171,7 +171,9 @@ const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS] = { "SMBus", "SystemCMOS", "PCIBARTarget", - "IPMI" + "IPMI", + "GeneralPurposeIo", + "GenericSerialBus" }; char *acpi_ut_get_region_name(u8 space_id) diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index d088c902d6bd..d5dee7ce9474 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -712,8 +712,10 @@ typedef u8 acpi_adr_space_type; #define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5 #define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6 #define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7 +#define ACPI_ADR_SPACE_GPIO (acpi_adr_space_type) 8 +#define ACPI_ADR_SPACE_GSBUS (acpi_adr_space_type) 9 -#define ACPI_NUM_PREDEFINED_REGIONS 8 +#define ACPI_NUM_PREDEFINED_REGIONS 10 /* * Special Address Spaces -- cgit v1.2.3 From e0fe0a8d4ed5474261d0ee1452f5d9ae77236958 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Wed, 16 Nov 2011 14:38:13 +0800 Subject: ACPI 5.0: Support for all new resource descriptors FixedDMA, GPIO descriptors, SerialBus descriptors Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown --- drivers/acpi/acpica/Makefile | 2 +- drivers/acpi/acpica/aclocal.h | 6 +- drivers/acpi/acpica/acresrc.h | 109 ++++++---- drivers/acpi/acpica/acutils.h | 1 + drivers/acpi/acpica/amlresrc.h | 136 +++++++++++++ drivers/acpi/acpica/rscalc.c | 87 +++++++- drivers/acpi/acpica/rscreate.c | 3 +- drivers/acpi/acpica/rsdump.c | 194 +++++++++++++++++- drivers/acpi/acpica/rsinfo.c | 56 +++++- drivers/acpi/acpica/rsirq.c | 31 +++ drivers/acpi/acpica/rslist.c | 75 +++++-- drivers/acpi/acpica/rsmisc.c | 267 ++++++++++++++++++++++++- drivers/acpi/acpica/rsserial.c | 441 +++++++++++++++++++++++++++++++++++++++++ drivers/acpi/acpica/rsutils.c | 4 + drivers/acpi/acpica/utresrc.c | 276 ++++++++++++++++++++++---- include/acpi/acrestyp.h | 207 ++++++++++++++++++- 16 files changed, 1776 insertions(+), 119 deletions(-) create mode 100644 drivers/acpi/acpica/rsserial.c (limited to 'include/acpi') diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 1bd466113dc8..b0af3b83eda8 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -36,7 +36,7 @@ acpi-y += psargs.o psparse.o psloop.o pstree.o pswalk.o \ psopcode.o psscope.o psutils.o psxface.o acpi-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \ - rscalc.o rsirq.o rsmemory.o rsutils.o + rscalc.o rsirq.o rsmemory.o rsutils.o rsserial.o acpi-$(ACPI_FUTURE_USAGE) += rsdump.o diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 52c4ebddbcf1..60aee56acc5b 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -955,7 +955,7 @@ struct acpi_port_info { #define ACPI_RESOURCE_NAME_END_DEPENDENT 0x38 #define ACPI_RESOURCE_NAME_IO 0x40 #define ACPI_RESOURCE_NAME_FIXED_IO 0x48 -#define ACPI_RESOURCE_NAME_RESERVED_S1 0x50 +#define ACPI_RESOURCE_NAME_FIXED_DMA 0x50 #define ACPI_RESOURCE_NAME_RESERVED_S2 0x58 #define ACPI_RESOURCE_NAME_RESERVED_S3 0x60 #define ACPI_RESOURCE_NAME_RESERVED_S4 0x68 @@ -977,7 +977,9 @@ struct acpi_port_info { #define ACPI_RESOURCE_NAME_EXTENDED_IRQ 0x89 #define ACPI_RESOURCE_NAME_ADDRESS64 0x8A #define ACPI_RESOURCE_NAME_EXTENDED_ADDRESS64 0x8B -#define ACPI_RESOURCE_NAME_LARGE_MAX 0x8B +#define ACPI_RESOURCE_NAME_GPIO 0x8C +#define ACPI_RESOURCE_NAME_SERIAL_BUS 0x8E +#define ACPI_RESOURCE_NAME_LARGE_MAX 0x8E /***************************************************************************** * diff --git a/drivers/acpi/acpica/acresrc.h b/drivers/acpi/acpica/acresrc.h index f08b55b7f3a0..05721b023f88 100644 --- a/drivers/acpi/acpica/acresrc.h +++ b/drivers/acpi/acpica/acresrc.h @@ -73,28 +73,40 @@ typedef const struct acpi_rsconvert_info { /* Resource conversion opcodes */ -#define ACPI_RSC_INITGET 0 -#define ACPI_RSC_INITSET 1 -#define ACPI_RSC_FLAGINIT 2 -#define ACPI_RSC_1BITFLAG 3 -#define ACPI_RSC_2BITFLAG 4 -#define ACPI_RSC_COUNT 5 -#define ACPI_RSC_COUNT16 6 -#define ACPI_RSC_LENGTH 7 -#define ACPI_RSC_MOVE8 8 -#define ACPI_RSC_MOVE16 9 -#define ACPI_RSC_MOVE32 10 -#define ACPI_RSC_MOVE64 11 -#define ACPI_RSC_SET8 12 -#define ACPI_RSC_DATA8 13 -#define ACPI_RSC_ADDRESS 14 -#define ACPI_RSC_SOURCE 15 -#define ACPI_RSC_SOURCEX 16 -#define ACPI_RSC_BITMASK 17 -#define ACPI_RSC_BITMASK16 18 -#define ACPI_RSC_EXIT_NE 19 -#define ACPI_RSC_EXIT_LE 20 -#define ACPI_RSC_EXIT_EQ 21 +typedef enum { + ACPI_RSC_INITGET = 0, + ACPI_RSC_INITSET, + ACPI_RSC_FLAGINIT, + ACPI_RSC_1BITFLAG, + ACPI_RSC_2BITFLAG, + ACPI_RSC_3BITFLAG, + ACPI_RSC_ADDRESS, + ACPI_RSC_BITMASK, + ACPI_RSC_BITMASK16, + ACPI_RSC_COUNT, + ACPI_RSC_COUNT16, + ACPI_RSC_COUNT_GPIO_PIN, + ACPI_RSC_COUNT_GPIO_RES, + ACPI_RSC_COUNT_GPIO_VEN, + ACPI_RSC_COUNT_SERIAL_RES, + ACPI_RSC_COUNT_SERIAL_VEN, + ACPI_RSC_DATA8, + ACPI_RSC_EXIT_EQ, + ACPI_RSC_EXIT_LE, + ACPI_RSC_EXIT_NE, + ACPI_RSC_LENGTH, + ACPI_RSC_MOVE_GPIO_PIN, + ACPI_RSC_MOVE_GPIO_RES, + ACPI_RSC_MOVE_SERIAL_RES, + ACPI_RSC_MOVE_SERIAL_VEN, + ACPI_RSC_MOVE8, + ACPI_RSC_MOVE16, + ACPI_RSC_MOVE32, + ACPI_RSC_MOVE64, + ACPI_RSC_SET8, + ACPI_RSC_SOURCE, + ACPI_RSC_SOURCEX +} ACPI_RSCONVERT_OPCODES; /* Resource Conversion sub-opcodes */ @@ -106,6 +118,9 @@ typedef const struct acpi_rsconvert_info { #define ACPI_RS_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_resource,f) #define AML_OFFSET(f) (u8) ACPI_OFFSET (union aml_resource,f) +/* + * Individual entry for the resource dump tables + */ typedef const struct acpi_rsdump_info { u8 opcode; u8 offset; @@ -116,20 +131,25 @@ typedef const struct acpi_rsdump_info { /* Values for the Opcode field above */ -#define ACPI_RSD_TITLE 0 -#define ACPI_RSD_LITERAL 1 -#define ACPI_RSD_STRING 2 -#define ACPI_RSD_UINT8 3 -#define ACPI_RSD_UINT16 4 -#define ACPI_RSD_UINT32 5 -#define ACPI_RSD_UINT64 6 -#define ACPI_RSD_1BITFLAG 7 -#define ACPI_RSD_2BITFLAG 8 -#define ACPI_RSD_SHORTLIST 9 -#define ACPI_RSD_LONGLIST 10 -#define ACPI_RSD_DWORDLIST 11 -#define ACPI_RSD_ADDRESS 12 -#define ACPI_RSD_SOURCE 13 +typedef enum { + ACPI_RSD_TITLE = 0, + ACPI_RSD_1BITFLAG, + ACPI_RSD_2BITFLAG, + ACPI_RSD_3BITFLAG, + ACPI_RSD_ADDRESS, + ACPI_RSD_DWORDLIST, + ACPI_RSD_LITERAL, + ACPI_RSD_LONGLIST, + ACPI_RSD_SHORTLIST, + ACPI_RSD_SHORTLISTX, + ACPI_RSD_SOURCE, + ACPI_RSD_STRING, + ACPI_RSD_UINT8, + ACPI_RSD_UINT16, + ACPI_RSD_UINT32, + ACPI_RSD_UINT64, + ACPI_RSD_WORDLIST +} ACPI_RSDUMP_OPCODES; /* restore default alignment */ @@ -138,13 +158,18 @@ typedef const struct acpi_rsdump_info { /* Resource tables indexed by internal resource type */ extern const u8 acpi_gbl_aml_resource_sizes[]; +extern const u8 acpi_gbl_aml_resource_serial_bus_sizes[]; extern struct acpi_rsconvert_info *acpi_gbl_set_resource_dispatch[]; /* Resource tables indexed by raw AML resource descriptor type */ extern const u8 acpi_gbl_resource_struct_sizes[]; +extern const u8 acpi_gbl_resource_struct_serial_bus_sizes[]; extern struct acpi_rsconvert_info *acpi_gbl_get_resource_dispatch[]; +extern struct acpi_rsconvert_info + *acpi_gbl_convert_resource_serial_bus_dispatch[]; + struct acpi_vendor_walk_info { struct acpi_vendor_uuid *uuid; struct acpi_buffer *buffer; @@ -293,6 +318,11 @@ extern struct acpi_rsconvert_info acpi_rs_convert_address16[]; extern struct acpi_rsconvert_info acpi_rs_convert_ext_irq[]; extern struct acpi_rsconvert_info acpi_rs_convert_address64[]; extern struct acpi_rsconvert_info acpi_rs_convert_ext_address64[]; +extern struct acpi_rsconvert_info acpi_rs_convert_gpio[]; +extern struct acpi_rsconvert_info acpi_rs_convert_fixed_dma[]; +extern struct acpi_rsconvert_info acpi_rs_convert_i2c_serial_bus[]; +extern struct acpi_rsconvert_info acpi_rs_convert_spi_serial_bus[]; +extern struct acpi_rsconvert_info acpi_rs_convert_uart_serial_bus[]; /* These resources require separate get/set tables */ @@ -310,6 +340,7 @@ extern struct acpi_rsconvert_info acpi_rs_set_vendor[]; * rsinfo */ extern struct acpi_rsdump_info *acpi_gbl_dump_resource_dispatch[]; +extern struct acpi_rsdump_info *acpi_gbl_dump_serial_bus_dispatch[]; /* * rsdump @@ -331,6 +362,12 @@ extern struct acpi_rsdump_info acpi_rs_dump_address64[]; extern struct acpi_rsdump_info acpi_rs_dump_ext_address64[]; extern struct acpi_rsdump_info acpi_rs_dump_ext_irq[]; extern struct acpi_rsdump_info acpi_rs_dump_generic_reg[]; +extern struct acpi_rsdump_info acpi_rs_dump_gpio[]; +extern struct acpi_rsdump_info acpi_rs_dump_fixed_dma[]; +extern struct acpi_rsdump_info acpi_rs_dump_common_serial_bus[]; +extern struct acpi_rsdump_info acpi_rs_dump_i2c_serial_bus[]; +extern struct acpi_rsdump_info acpi_rs_dump_spi_serial_bus[]; +extern struct acpi_rsdump_info acpi_rs_dump_uart_serial_bus[]; #endif #endif /* __ACRESRC_H__ */ diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index 99c140d8e348..ab95d452f87d 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -45,6 +45,7 @@ #define _ACUTILS_H extern const u8 acpi_gbl_resource_aml_sizes[]; +extern const u8 acpi_gbl_resource_aml_serial_bus_sizes[]; /* Strings used by the disassembler and debugger resource dump routines */ diff --git a/drivers/acpi/acpica/amlresrc.h b/drivers/acpi/acpica/amlresrc.h index 59122cde247c..d4c30511aca9 100644 --- a/drivers/acpi/acpica/amlresrc.h +++ b/drivers/acpi/acpica/amlresrc.h @@ -58,29 +58,48 @@ #define ACPI_RESTAG_TYPESPECIFICATTRIBUTES "_ATT" #define ACPI_RESTAG_BASEADDRESS "_BAS" #define ACPI_RESTAG_BUSMASTER "_BM_" /* Master(1), Slave(0) */ +#define ACPI_RESTAG_DEBOUNCETIME "_DBT" #define ACPI_RESTAG_DECODE "_DEC" +#define ACPI_RESTAG_DEVICEPOLARITY "_DPL" #define ACPI_RESTAG_DMA "_DMA" #define ACPI_RESTAG_DMATYPE "_TYP" /* Compatible(0), A(1), B(2), F(3) */ +#define ACPI_RESTAG_DRIVESTRENGTH "_DRS" +#define ACPI_RESTAG_ENDIANNESS "_END" +#define ACPI_RESTAG_FLOWCONTROL "_FLC" #define ACPI_RESTAG_GRANULARITY "_GRA" #define ACPI_RESTAG_INTERRUPT "_INT" #define ACPI_RESTAG_INTERRUPTLEVEL "_LL_" /* active_lo(1), active_hi(0) */ #define ACPI_RESTAG_INTERRUPTSHARE "_SHR" /* Shareable(1), no_share(0) */ #define ACPI_RESTAG_INTERRUPTTYPE "_HE_" /* Edge(1), Level(0) */ +#define ACPI_RESTAG_IORESTRICTION "_IOR" #define ACPI_RESTAG_LENGTH "_LEN" +#define ACPI_RESTAG_LINE "_LIN" #define ACPI_RESTAG_MEMATTRIBUTES "_MTP" /* Memory(0), Reserved(1), ACPI(2), NVS(3) */ #define ACPI_RESTAG_MEMTYPE "_MEM" /* non_cache(0), Cacheable(1) Cache+combine(2), Cache+prefetch(3) */ #define ACPI_RESTAG_MAXADDR "_MAX" #define ACPI_RESTAG_MINADDR "_MIN" #define ACPI_RESTAG_MAXTYPE "_MAF" #define ACPI_RESTAG_MINTYPE "_MIF" +#define ACPI_RESTAG_MODE "_MOD" +#define ACPI_RESTAG_PARITY "_PAR" +#define ACPI_RESTAG_PHASE "_PHA" +#define ACPI_RESTAG_PIN "_PIN" +#define ACPI_RESTAG_PINCONFIG "_PPI" +#define ACPI_RESTAG_POLARITY "_POL" #define ACPI_RESTAG_REGISTERBITOFFSET "_RBO" #define ACPI_RESTAG_REGISTERBITWIDTH "_RBW" #define ACPI_RESTAG_RANGETYPE "_RNG" #define ACPI_RESTAG_READWRITETYPE "_RW_" /* read_only(0), Writeable (1) */ +#define ACPI_RESTAG_LENGTH_RX "_RXL" +#define ACPI_RESTAG_LENGTH_TX "_TXL" +#define ACPI_RESTAG_SLAVEMODE "_SLV" +#define ACPI_RESTAG_SPEED "_SPE" +#define ACPI_RESTAG_STOPBITS "_STB" #define ACPI_RESTAG_TRANSLATION "_TRA" #define ACPI_RESTAG_TRANSTYPE "_TRS" /* Sparse(1), Dense(0) */ #define ACPI_RESTAG_TYPE "_TTP" /* Translation(1), Static (0) */ #define ACPI_RESTAG_XFERTYPE "_SIZ" /* 8(0), 8_and16(1), 16(2) */ +#define ACPI_RESTAG_VENDORDATA "_VEN" /* Default sizes for "small" resource descriptors */ @@ -90,6 +109,7 @@ #define ASL_RDESC_END_DEPEND_SIZE 0x00 #define ASL_RDESC_IO_SIZE 0x07 #define ASL_RDESC_FIXED_IO_SIZE 0x03 +#define ASL_RDESC_FIXED_DMA_SIZE 0x05 #define ASL_RDESC_END_TAG_SIZE 0x01 struct asl_resource_node { @@ -164,6 +184,12 @@ struct aml_resource_end_tag { AML_RESOURCE_SMALL_HEADER_COMMON u8 checksum; }; +struct aml_resource_fixed_dma { + AML_RESOURCE_SMALL_HEADER_COMMON u16 request_lines; + u16 channels; + u8 width; +}; + /* * LARGE descriptors */ @@ -263,6 +289,110 @@ struct aml_resource_generic_register { u64 address; }; +/* Common descriptor for gpio_int and gpio_io (ACPI 5.0) */ + +struct aml_resource_gpio { + AML_RESOURCE_LARGE_HEADER_COMMON u8 revision_id; + u8 connection_type; + u16 flags; + u16 int_flags; + u8 pin_config; + u16 drive_strength; + u16 debounce_timeout; + u16 pin_table_offset; + u8 res_source_index; + u16 res_source_offset; + u16 vendor_offset; + u16 vendor_length; + /* + * Optional fields follow immediately: + * 1) PIN list (Words) + * 2) Resource Source String + * 3) Vendor Data bytes + */ +}; + +#define AML_RESOURCE_GPIO_REVISION 1 /* ACPI 5.0 */ + +/* Values for connection_type above */ + +#define AML_RESOURCE_GPIO_TYPE_INT 0 +#define AML_RESOURCE_GPIO_TYPE_IO 1 +#define AML_RESOURCE_MAX_GPIOTYPE 1 + +/* Common preamble for all serial descriptors (ACPI 5.0) */ + +#define AML_RESOURCE_SERIAL_COMMON \ + u8 revision_id; \ + u8 res_source_index; \ + u8 type; \ + u8 flags; \ + u16 type_specific_flags; \ + u8 type_revision_id; \ + u16 type_data_length; \ + +/* Values for the type field above */ + +#define AML_RESOURCE_I2C_SERIALBUSTYPE 1 +#define AML_RESOURCE_SPI_SERIALBUSTYPE 2 +#define AML_RESOURCE_UART_SERIALBUSTYPE 3 +#define AML_RESOURCE_MAX_SERIALBUSTYPE 3 +#define AML_RESOURCE_VENDOR_SERIALBUSTYPE 192 /* Vendor defined is 0xC0-0xFF (NOT SUPPORTED) */ + +struct aml_resource_common_serialbus { +AML_RESOURCE_LARGE_HEADER_COMMON AML_RESOURCE_SERIAL_COMMON}; + +struct aml_resource_i2c_serialbus { + AML_RESOURCE_LARGE_HEADER_COMMON + AML_RESOURCE_SERIAL_COMMON u32 connection_speed; + u16 slave_address; + /* + * Optional fields follow immediately: + * 1) Vendor Data bytes + * 2) Resource Source String + */ +}; + +#define AML_RESOURCE_I2C_REVISION 1 /* ACPI 5.0 */ +#define AML_RESOURCE_I2C_TYPE_REVISION 1 /* ACPI 5.0 */ +#define AML_RESOURCE_I2C_MIN_DATA_LEN 6 + +struct aml_resource_spi_serialbus { + AML_RESOURCE_LARGE_HEADER_COMMON + AML_RESOURCE_SERIAL_COMMON u32 connection_speed; + u8 data_bit_length; + u8 clock_phase; + u8 clock_polarity; + u16 device_selection; + /* + * Optional fields follow immediately: + * 1) Vendor Data bytes + * 2) Resource Source String + */ +}; + +#define AML_RESOURCE_SPI_REVISION 1 /* ACPI 5.0 */ +#define AML_RESOURCE_SPI_TYPE_REVISION 1 /* ACPI 5.0 */ +#define AML_RESOURCE_SPI_MIN_DATA_LEN 9 + +struct aml_resource_uart_serialbus { + AML_RESOURCE_LARGE_HEADER_COMMON + AML_RESOURCE_SERIAL_COMMON u32 default_baud_rate; + u16 rx_fifo_size; + u16 tx_fifo_size; + u8 parity; + u8 lines_enabled; + /* + * Optional fields follow immediately: + * 1) Vendor Data bytes + * 2) Resource Source String + */ +}; + +#define AML_RESOURCE_UART_REVISION 1 /* ACPI 5.0 */ +#define AML_RESOURCE_UART_TYPE_REVISION 1 /* ACPI 5.0 */ +#define AML_RESOURCE_UART_MIN_DATA_LEN 10 + /* restore default alignment */ #pragma pack() @@ -284,6 +414,7 @@ union aml_resource { struct aml_resource_end_dependent end_dpf; struct aml_resource_io io; struct aml_resource_fixed_io fixed_io; + struct aml_resource_fixed_dma fixed_dma; struct aml_resource_vendor_small vendor_small; struct aml_resource_end_tag end_tag; @@ -299,6 +430,11 @@ union aml_resource { struct aml_resource_address64 address64; struct aml_resource_extended_address64 ext_address64; struct aml_resource_extended_irq extended_irq; + struct aml_resource_gpio gpio; + struct aml_resource_i2c_serialbus i2c_serial_bus; + struct aml_resource_spi_serialbus spi_serial_bus; + struct aml_resource_uart_serialbus uart_serial_bus; + struct aml_resource_common_serialbus common_serial_bus; /* Utility overlays */ diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c index 3a8a89ec2ca4..3a29b4dd4453 100644 --- a/drivers/acpi/acpica/rscalc.c +++ b/drivers/acpi/acpica/rscalc.c @@ -313,6 +313,38 @@ acpi_rs_get_aml_length(struct acpi_resource * resource, acpi_size * size_needed) resource_source)); break; + case ACPI_RESOURCE_TYPE_GPIO: + + total_size = + (acpi_rs_length) (total_size + + (resource->data.gpio. + pin_table_length * 2) + + resource->data.gpio. + resource_source.string_length + + resource->data.gpio. + vendor_length); + + break; + + case ACPI_RESOURCE_TYPE_SERIAL_BUS: + + total_size = + acpi_gbl_aml_resource_serial_bus_sizes[resource-> + data. + common_serial_bus. + type]; + + total_size = (acpi_rs_length) (total_size + + resource->data. + i2c_serial_bus. + resource_source. + string_length + + resource->data. + i2c_serial_bus. + vendor_length); + + break; + default: break; } @@ -362,10 +394,11 @@ acpi_rs_get_list_length(u8 * aml_buffer, u32 extra_struct_bytes; u8 resource_index; u8 minimum_aml_resource_length; + union aml_resource *aml_resource; ACPI_FUNCTION_TRACE(rs_get_list_length); - *size_needed = 0; + *size_needed = ACPI_RS_SIZE_MIN; /* Minimum size is one end_tag */ end_aml = aml_buffer + aml_buffer_length; /* Walk the list of AML resource descriptors */ @@ -376,9 +409,15 @@ acpi_rs_get_list_length(u8 * aml_buffer, status = acpi_ut_validate_resource(aml_buffer, &resource_index); if (ACPI_FAILURE(status)) { + /* + * Exit on failure. Cannot continue because the descriptor length + * may be bogus also. + */ return_ACPI_STATUS(status); } + aml_resource = (void *)aml_buffer; + /* Get the resource length and base (minimum) AML size */ resource_length = acpi_ut_get_resource_length(aml_buffer); @@ -422,10 +461,8 @@ acpi_rs_get_list_length(u8 * aml_buffer, case ACPI_RESOURCE_NAME_END_TAG: /* - * End Tag: - * This is the normal exit, add size of end_tag + * End Tag: This is the normal exit */ - *size_needed += ACPI_RS_SIZE_MIN; return_ACPI_STATUS(AE_OK); case ACPI_RESOURCE_NAME_ADDRESS32: @@ -457,6 +494,33 @@ acpi_rs_get_list_length(u8 * aml_buffer, minimum_aml_resource_length); break; + case ACPI_RESOURCE_NAME_GPIO: + + /* Vendor data is optional */ + + if (aml_resource->gpio.vendor_length) { + extra_struct_bytes += + aml_resource->gpio.vendor_offset - + aml_resource->gpio.pin_table_offset + + aml_resource->gpio.vendor_length; + } else { + extra_struct_bytes += + aml_resource->large_header.resource_length + + sizeof(struct aml_resource_large_header) - + aml_resource->gpio.pin_table_offset; + } + break; + + case ACPI_RESOURCE_NAME_SERIAL_BUS: + + minimum_aml_resource_length = + acpi_gbl_resource_aml_serial_bus_sizes + [aml_resource->common_serial_bus.type]; + extra_struct_bytes += + aml_resource->common_serial_bus.resource_length - + minimum_aml_resource_length; + break; + default: break; } @@ -467,9 +531,18 @@ acpi_rs_get_list_length(u8 * aml_buffer, * Important: Round the size up for the appropriate alignment. This * is a requirement on IA64. */ - buffer_size = acpi_gbl_resource_struct_sizes[resource_index] + - extra_struct_bytes; - buffer_size = (u32) ACPI_ROUND_UP_TO_NATIVE_WORD(buffer_size); + if (acpi_ut_get_resource_type(aml_buffer) == + ACPI_RESOURCE_NAME_SERIAL_BUS) { + buffer_size = + acpi_gbl_resource_struct_serial_bus_sizes + [aml_resource->common_serial_bus.type] + + extra_struct_bytes; + } else { + buffer_size = + acpi_gbl_resource_struct_sizes[resource_index] + + extra_struct_bytes; + } + buffer_size = (u32)ACPI_ROUND_UP_TO_NATIVE_WORD(buffer_size); *size_needed += buffer_size; diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c index 4ce6e1147e80..f61285d5edc3 100644 --- a/drivers/acpi/acpica/rscreate.c +++ b/drivers/acpi/acpica/rscreate.c @@ -66,9 +66,10 @@ ACPI_MODULE_NAME("rscreate") * of device resources. * ******************************************************************************/ + acpi_status acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer, - struct acpi_buffer *output_buffer) + struct acpi_buffer * output_buffer) { acpi_status status; diff --git a/drivers/acpi/acpica/rsdump.c b/drivers/acpi/acpica/rsdump.c index 33db7520c74b..9969985bf2b7 100644 --- a/drivers/acpi/acpica/rsdump.c +++ b/drivers/acpi/acpica/rsdump.c @@ -61,11 +61,13 @@ static void acpi_rs_out_integer64(char *title, u64 value); static void acpi_rs_out_title(char *title); -static void acpi_rs_dump_byte_list(u16 length, u8 * data); +static void acpi_rs_dump_byte_list(u16 length, u8 *data); -static void acpi_rs_dump_dword_list(u8 length, u32 * data); +static void acpi_rs_dump_word_list(u16 length, u16 *data); -static void acpi_rs_dump_short_byte_list(u8 length, u8 * data); +static void acpi_rs_dump_dword_list(u8 length, u32 *data); + +static void acpi_rs_dump_short_byte_list(u8 length, u8 *data); static void acpi_rs_dump_resource_source(struct acpi_resource_source *resource_source); @@ -309,6 +311,125 @@ struct acpi_rsdump_info acpi_rs_dump_generic_reg[6] = { {ACPI_RSD_UINT64, ACPI_RSD_OFFSET(generic_reg.address), "Address", NULL} }; +struct acpi_rsdump_info acpi_rs_dump_gpio[16] = { + {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_gpio), "GPIO", NULL}, + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(gpio.revision_id), "RevisionId", NULL}, + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(gpio.connection_type), + "ConnectionType", acpi_gbl_ct_decode}, + {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(gpio.producer_consumer), + "ProducerConsumer", acpi_gbl_consume_decode}, + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(gpio.pin_config), "PinConfig", + acpi_gbl_ppc_decode}, + {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(gpio.sharable), "Sharable", + acpi_gbl_shr_decode}, + {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(gpio.io_restriction), + "IoRestriction", acpi_gbl_ior_decode}, + {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(gpio.triggering), "Triggering", + acpi_gbl_he_decode}, + {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(gpio.polarity), "Polarity", + acpi_gbl_ll_decode}, + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(gpio.drive_strength), "DriveStrength", + NULL}, + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(gpio.debounce_timeout), + "DebounceTimeout", NULL}, + {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET(gpio.resource_source), + "ResourceSource", NULL}, + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(gpio.pin_table_length), + "PinTableLength", NULL}, + {ACPI_RSD_WORDLIST, ACPI_RSD_OFFSET(gpio.pin_table), "PinTable", NULL}, + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(gpio.vendor_length), "VendorLength", + NULL}, + {ACPI_RSD_SHORTLISTX, ACPI_RSD_OFFSET(gpio.vendor_data), "VendorData", + NULL}, +}; + +struct acpi_rsdump_info acpi_rs_dump_fixed_dma[4] = { + {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_fixed_dma), + "FixedDma", NULL}, + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(fixed_dma.request_lines), + "RequestLines", NULL}, + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(fixed_dma.channels), "Channels", + NULL}, + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(fixed_dma.width), "TransferWidth", + acpi_gbl_dts_decode}, +}; + +#define ACPI_RS_DUMP_COMMON_SERIAL_BUS \ + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET (common_serial_bus.revision_id), "RevisionId", NULL}, \ + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET (common_serial_bus.type), "Type", acpi_gbl_sbt_decode}, \ + {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET (common_serial_bus.producer_consumer), "ProducerConsumer", acpi_gbl_consume_decode}, \ + {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET (common_serial_bus.slave_mode), "SlaveMode", acpi_gbl_sm_decode}, \ + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET (common_serial_bus.type_revision_id), "TypeRevisionId", NULL}, \ + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET (common_serial_bus.type_data_length), "TypeDataLength", NULL}, \ + {ACPI_RSD_SOURCE, ACPI_RSD_OFFSET (common_serial_bus.resource_source), "ResourceSource", NULL}, \ + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET (common_serial_bus.vendor_length), "VendorLength", NULL}, \ + {ACPI_RSD_SHORTLISTX,ACPI_RSD_OFFSET (common_serial_bus.vendor_data), "VendorData", NULL}, + +struct acpi_rsdump_info acpi_rs_dump_common_serial_bus[10] = { + {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_common_serial_bus), + "Common Serial Bus", NULL}, + ACPI_RS_DUMP_COMMON_SERIAL_BUS +}; + +struct acpi_rsdump_info acpi_rs_dump_i2c_serial_bus[13] = { + {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_i2c_serial_bus), + "I2C Serial Bus", NULL}, + ACPI_RS_DUMP_COMMON_SERIAL_BUS {ACPI_RSD_1BITFLAG, + ACPI_RSD_OFFSET(i2c_serial_bus. + access_mode), + "AccessMode", acpi_gbl_am_decode}, + {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(i2c_serial_bus.connection_speed), + "ConnectionSpeed", NULL}, + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(i2c_serial_bus.slave_address), + "SlaveAddress", NULL}, +}; + +struct acpi_rsdump_info acpi_rs_dump_spi_serial_bus[17] = { + {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_spi_serial_bus), + "Spi Serial Bus", NULL}, + ACPI_RS_DUMP_COMMON_SERIAL_BUS {ACPI_RSD_1BITFLAG, + ACPI_RSD_OFFSET(spi_serial_bus. + wire_mode), "WireMode", + acpi_gbl_wm_decode}, + {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(spi_serial_bus.device_polarity), + "DevicePolarity", acpi_gbl_dp_decode}, + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(spi_serial_bus.data_bit_length), + "DataBitLength", NULL}, + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(spi_serial_bus.clock_phase), + "ClockPhase", acpi_gbl_cph_decode}, + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(spi_serial_bus.clock_polarity), + "ClockPolarity", acpi_gbl_cpo_decode}, + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(spi_serial_bus.device_selection), + "DeviceSelection", NULL}, + {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(spi_serial_bus.connection_speed), + "ConnectionSpeed", NULL}, +}; + +struct acpi_rsdump_info acpi_rs_dump_uart_serial_bus[19] = { + {ACPI_RSD_TITLE, ACPI_RSD_TABLE_SIZE(acpi_rs_dump_uart_serial_bus), + "Uart Serial Bus", NULL}, + ACPI_RS_DUMP_COMMON_SERIAL_BUS {ACPI_RSD_2BITFLAG, + ACPI_RSD_OFFSET(uart_serial_bus. + flow_control), + "FlowControl", acpi_gbl_fc_decode}, + {ACPI_RSD_2BITFLAG, ACPI_RSD_OFFSET(uart_serial_bus.stop_bits), + "StopBits", acpi_gbl_sb_decode}, + {ACPI_RSD_3BITFLAG, ACPI_RSD_OFFSET(uart_serial_bus.data_bits), + "DataBits", acpi_gbl_bpb_decode}, + {ACPI_RSD_1BITFLAG, ACPI_RSD_OFFSET(uart_serial_bus.endian), "Endian", + acpi_gbl_ed_decode}, + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(uart_serial_bus.parity), "Parity", + acpi_gbl_pt_decode}, + {ACPI_RSD_UINT8, ACPI_RSD_OFFSET(uart_serial_bus.lines_enabled), + "LinesEnabled", NULL}, + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(uart_serial_bus.rx_fifo_size), + "RxFifoSize", NULL}, + {ACPI_RSD_UINT16, ACPI_RSD_OFFSET(uart_serial_bus.tx_fifo_size), + "TxFifoSize", NULL}, + {ACPI_RSD_UINT32, ACPI_RSD_OFFSET(uart_serial_bus.default_baud_rate), + "ConnectionSpeed", NULL}, +}; + /* * Tables used for common address descriptor flag fields */ @@ -413,7 +534,14 @@ acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table) /* Data items, 8/16/32/64 bit */ case ACPI_RSD_UINT8: - acpi_rs_out_integer8(name, ACPI_GET8(target)); + if (table->pointer) { + acpi_rs_out_string(name, ACPI_CAST_PTR(char, + table-> + pointer + [*target])); + } else { + acpi_rs_out_integer8(name, ACPI_GET8(target)); + } break; case ACPI_RSD_UINT16: @@ -444,6 +572,13 @@ acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table) 0x03])); break; + case ACPI_RSD_3BITFLAG: + acpi_rs_out_string(name, ACPI_CAST_PTR(char, + table-> + pointer[*target & + 0x07])); + break; + case ACPI_RSD_SHORTLIST: /* * Short byte list (single line output) for DMA and IRQ resources @@ -456,6 +591,20 @@ acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table) } break; + case ACPI_RSD_SHORTLISTX: + /* + * Short byte list (single line output) for GPIO vendor data + * Note: The list length is obtained from the previous table entry + */ + if (previous_target) { + acpi_rs_out_title(name); + acpi_rs_dump_short_byte_list(*previous_target, + * + (ACPI_CAST_INDIRECT_PTR + (u8, target))); + } + break; + case ACPI_RSD_LONGLIST: /* * Long byte list for Vendor resource data @@ -480,6 +629,18 @@ acpi_rs_dump_descriptor(void *resource, struct acpi_rsdump_info *table) } break; + case ACPI_RSD_WORDLIST: + /* + * Word list for GPIO Pin Table + * Note: The list length is obtained from the previous table entry + */ + if (previous_target) { + acpi_rs_dump_word_list(*previous_target, + *(ACPI_CAST_INDIRECT_PTR + (u16, target))); + } + break; + case ACPI_RSD_ADDRESS: /* * Common flags for all Address resources @@ -627,14 +788,20 @@ void acpi_rs_dump_resource_list(struct acpi_resource *resource_list) /* Dump the resource descriptor */ - acpi_rs_dump_descriptor(&resource_list->data, - acpi_gbl_dump_resource_dispatch[type]); + if (type == ACPI_RESOURCE_TYPE_SERIAL_BUS) { + acpi_rs_dump_descriptor(&resource_list->data, + acpi_gbl_dump_serial_bus_dispatch + [resource_list->data. + common_serial_bus.type]); + } else { + acpi_rs_dump_descriptor(&resource_list->data, + acpi_gbl_dump_resource_dispatch + [type]); + } /* Point to the next resource structure */ - resource_list = - ACPI_ADD_PTR(struct acpi_resource, resource_list, - resource_list->length); + resource_list = ACPI_NEXT_RESOURCE(resource_list); /* Exit when END_TAG descriptor is reached */ @@ -768,4 +935,13 @@ static void acpi_rs_dump_dword_list(u8 length, u32 * data) } } +static void acpi_rs_dump_word_list(u16 length, u16 *data) +{ + u16 i; + + for (i = 0; i < length; i++) { + acpi_os_printf("%25s%2.2X : %4.4X\n", "Word", i, data[i]); + } +} + #endif diff --git a/drivers/acpi/acpica/rsinfo.c b/drivers/acpi/acpica/rsinfo.c index f9ea60872aa4..e5489bf475fa 100644 --- a/drivers/acpi/acpica/rsinfo.c +++ b/drivers/acpi/acpica/rsinfo.c @@ -76,7 +76,10 @@ struct acpi_rsconvert_info *acpi_gbl_set_resource_dispatch[] = { acpi_rs_convert_address64, /* 0x0D, ACPI_RESOURCE_TYPE_ADDRESS64 */ acpi_rs_convert_ext_address64, /* 0x0E, ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64 */ acpi_rs_convert_ext_irq, /* 0x0F, ACPI_RESOURCE_TYPE_EXTENDED_IRQ */ - acpi_rs_convert_generic_reg /* 0x10, ACPI_RESOURCE_TYPE_GENERIC_REGISTER */ + acpi_rs_convert_generic_reg, /* 0x10, ACPI_RESOURCE_TYPE_GENERIC_REGISTER */ + acpi_rs_convert_gpio, /* 0x11, ACPI_RESOURCE_TYPE_GPIO */ + acpi_rs_convert_fixed_dma, /* 0x12, ACPI_RESOURCE_TYPE_FIXED_DMA */ + NULL, /* 0x13, ACPI_RESOURCE_TYPE_SERIAL_BUS - Use subtype table below */ }; /* Dispatch tables for AML-to-resource (Get Resource) conversion functions */ @@ -94,7 +97,7 @@ struct acpi_rsconvert_info *acpi_gbl_get_resource_dispatch[] = { acpi_rs_convert_end_dpf, /* 0x07, ACPI_RESOURCE_NAME_END_DEPENDENT */ acpi_rs_convert_io, /* 0x08, ACPI_RESOURCE_NAME_IO */ acpi_rs_convert_fixed_io, /* 0x09, ACPI_RESOURCE_NAME_FIXED_IO */ - NULL, /* 0x0A, Reserved */ + acpi_rs_convert_fixed_dma, /* 0x0A, ACPI_RESOURCE_NAME_FIXED_DMA */ NULL, /* 0x0B, Reserved */ NULL, /* 0x0C, Reserved */ NULL, /* 0x0D, Reserved */ @@ -114,7 +117,19 @@ struct acpi_rsconvert_info *acpi_gbl_get_resource_dispatch[] = { acpi_rs_convert_address16, /* 0x08, ACPI_RESOURCE_NAME_ADDRESS16 */ acpi_rs_convert_ext_irq, /* 0x09, ACPI_RESOURCE_NAME_EXTENDED_IRQ */ acpi_rs_convert_address64, /* 0x0A, ACPI_RESOURCE_NAME_ADDRESS64 */ - acpi_rs_convert_ext_address64 /* 0x0B, ACPI_RESOURCE_NAME_EXTENDED_ADDRESS64 */ + acpi_rs_convert_ext_address64, /* 0x0B, ACPI_RESOURCE_NAME_EXTENDED_ADDRESS64 */ + acpi_rs_convert_gpio, /* 0x0C, ACPI_RESOURCE_NAME_GPIO */ + NULL, /* 0x0D, Reserved */ + NULL, /* 0x0E, ACPI_RESOURCE_NAME_SERIAL_BUS - Use subtype table below */ +}; + +/* Subtype table for serial_bus -- I2C, SPI, and UART */ + +struct acpi_rsconvert_info *acpi_gbl_convert_resource_serial_bus_dispatch[] = { + NULL, + acpi_rs_convert_i2c_serial_bus, + acpi_rs_convert_spi_serial_bus, + acpi_rs_convert_uart_serial_bus, }; #ifdef ACPI_FUTURE_USAGE @@ -140,6 +155,16 @@ struct acpi_rsdump_info *acpi_gbl_dump_resource_dispatch[] = { acpi_rs_dump_ext_address64, /* ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64 */ acpi_rs_dump_ext_irq, /* ACPI_RESOURCE_TYPE_EXTENDED_IRQ */ acpi_rs_dump_generic_reg, /* ACPI_RESOURCE_TYPE_GENERIC_REGISTER */ + acpi_rs_dump_gpio, /* ACPI_RESOURCE_TYPE_GPIO */ + acpi_rs_dump_fixed_dma, /* ACPI_RESOURCE_TYPE_FIXED_DMA */ + NULL, /* ACPI_RESOURCE_TYPE_SERIAL_BUS */ +}; + +struct acpi_rsdump_info *acpi_gbl_dump_serial_bus_dispatch[] = { + NULL, + acpi_rs_dump_i2c_serial_bus, /* AML_RESOURCE_I2C_BUS_TYPE */ + acpi_rs_dump_spi_serial_bus, /* AML_RESOURCE_SPI_BUS_TYPE */ + acpi_rs_dump_uart_serial_bus, /* AML_RESOURCE_UART_BUS_TYPE */ }; #endif @@ -166,7 +191,10 @@ const u8 acpi_gbl_aml_resource_sizes[] = { sizeof(struct aml_resource_address64), /* ACPI_RESOURCE_TYPE_ADDRESS64 */ sizeof(struct aml_resource_extended_address64), /*ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64 */ sizeof(struct aml_resource_extended_irq), /* ACPI_RESOURCE_TYPE_EXTENDED_IRQ */ - sizeof(struct aml_resource_generic_register) /* ACPI_RESOURCE_TYPE_GENERIC_REGISTER */ + sizeof(struct aml_resource_generic_register), /* ACPI_RESOURCE_TYPE_GENERIC_REGISTER */ + sizeof(struct aml_resource_gpio), /* ACPI_RESOURCE_TYPE_GPIO */ + sizeof(struct aml_resource_fixed_dma), /* ACPI_RESOURCE_TYPE_FIXED_DMA */ + sizeof(struct aml_resource_common_serialbus), /* ACPI_RESOURCE_TYPE_SERIAL_BUS */ }; const u8 acpi_gbl_resource_struct_sizes[] = { @@ -182,7 +210,7 @@ const u8 acpi_gbl_resource_struct_sizes[] = { ACPI_RS_SIZE_MIN, ACPI_RS_SIZE(struct acpi_resource_io), ACPI_RS_SIZE(struct acpi_resource_fixed_io), - 0, + ACPI_RS_SIZE(struct acpi_resource_fixed_dma), 0, 0, 0, @@ -202,5 +230,21 @@ const u8 acpi_gbl_resource_struct_sizes[] = { ACPI_RS_SIZE(struct acpi_resource_address16), ACPI_RS_SIZE(struct acpi_resource_extended_irq), ACPI_RS_SIZE(struct acpi_resource_address64), - ACPI_RS_SIZE(struct acpi_resource_extended_address64) + ACPI_RS_SIZE(struct acpi_resource_extended_address64), + ACPI_RS_SIZE(struct acpi_resource_gpio), + ACPI_RS_SIZE(struct acpi_resource_common_serialbus) +}; + +const u8 acpi_gbl_aml_resource_serial_bus_sizes[] = { + 0, + sizeof(struct aml_resource_i2c_serialbus), + sizeof(struct aml_resource_spi_serialbus), + sizeof(struct aml_resource_uart_serialbus), +}; + +const u8 acpi_gbl_resource_struct_serial_bus_sizes[] = { + 0, + ACPI_RS_SIZE(struct acpi_resource_i2c_serialbus), + ACPI_RS_SIZE(struct acpi_resource_spi_serialbus), + ACPI_RS_SIZE(struct acpi_resource_uart_serialbus), }; diff --git a/drivers/acpi/acpica/rsirq.c b/drivers/acpi/acpica/rsirq.c index 50b8ad211167..3ac9d4a08fcf 100644 --- a/drivers/acpi/acpica/rsirq.c +++ b/drivers/acpi/acpica/rsirq.c @@ -264,3 +264,34 @@ struct acpi_rsconvert_info acpi_rs_convert_dma[6] = { AML_OFFSET(dma.dma_channel_mask), ACPI_RS_OFFSET(data.dma.channel_count)} }; + +/******************************************************************************* + * + * acpi_rs_convert_fixed_dma + * + ******************************************************************************/ + +struct acpi_rsconvert_info acpi_rs_convert_fixed_dma[4] = { + {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_FIXED_DMA, + ACPI_RS_SIZE(struct acpi_resource_fixed_dma), + ACPI_RSC_TABLE_SIZE(acpi_rs_convert_fixed_dma)}, + + {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_FIXED_DMA, + sizeof(struct aml_resource_fixed_dma), + 0}, + + /* + * These fields are contiguous in both the source and destination: + * request_lines + * Channels + */ + + {ACPI_RSC_MOVE16, ACPI_RS_OFFSET(data.fixed_dma.request_lines), + AML_OFFSET(fixed_dma.request_lines), + 2}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.fixed_dma.width), + AML_OFFSET(fixed_dma.width), + 1}, + +}; diff --git a/drivers/acpi/acpica/rslist.c b/drivers/acpi/acpica/rslist.c index 1bfcef736c50..c44635136598 100644 --- a/drivers/acpi/acpica/rslist.c +++ b/drivers/acpi/acpica/rslist.c @@ -70,6 +70,8 @@ acpi_rs_convert_aml_to_resources(u8 * aml, struct acpi_resource **resource_ptr = ACPI_CAST_INDIRECT_PTR(struct acpi_resource, context); struct acpi_resource *resource; + union aml_resource *aml_resource; + struct acpi_rsconvert_info *conversion_table; acpi_status status; ACPI_FUNCTION_TRACE(rs_convert_aml_to_resources); @@ -84,14 +86,37 @@ acpi_rs_convert_aml_to_resources(u8 * aml, "Misaligned resource pointer %p", resource)); } + /* Get the appropriate conversion info table */ + + aml_resource = ACPI_CAST_PTR(union aml_resource, aml); + if (acpi_ut_get_resource_type(aml) == ACPI_RESOURCE_NAME_SERIAL_BUS) { + if (aml_resource->common_serial_bus.type > + AML_RESOURCE_MAX_SERIALBUSTYPE) { + conversion_table = NULL; + } else { + /* This is an I2C, SPI, or UART serial_bus descriptor */ + + conversion_table = + acpi_gbl_convert_resource_serial_bus_dispatch + [aml_resource->common_serial_bus.type]; + } + } else { + conversion_table = + acpi_gbl_get_resource_dispatch[resource_index]; + } + + if (!conversion_table) { + ACPI_ERROR((AE_INFO, + "Invalid/unsupported resource descriptor: Type 0x%2.2X", + resource_index)); + return (AE_AML_INVALID_RESOURCE_TYPE); + } + /* Convert the AML byte stream resource to a local resource struct */ status = - acpi_rs_convert_aml_to_resource(resource, - ACPI_CAST_PTR(union aml_resource, - aml), - acpi_gbl_get_resource_dispatch - [resource_index]); + acpi_rs_convert_aml_to_resource(resource, aml_resource, + conversion_table); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Could not convert AML resource (Type 0x%X)", @@ -106,7 +131,7 @@ acpi_rs_convert_aml_to_resources(u8 * aml, /* Point to the next structure in the output buffer */ - *resource_ptr = ACPI_ADD_PTR(void, resource, resource->length); + *resource_ptr = ACPI_NEXT_RESOURCE(resource); return_ACPI_STATUS(AE_OK); } @@ -135,6 +160,7 @@ acpi_rs_convert_resources_to_aml(struct acpi_resource *resource, { u8 *aml = output_buffer; u8 *end_aml = output_buffer + aml_size_needed; + struct acpi_rsconvert_info *conversion_table; acpi_status status; ACPI_FUNCTION_TRACE(rs_convert_resources_to_aml); @@ -154,11 +180,34 @@ acpi_rs_convert_resources_to_aml(struct acpi_resource *resource, /* Perform the conversion */ - status = acpi_rs_convert_resource_to_aml(resource, ACPI_CAST_PTR(union - aml_resource, - aml), - acpi_gbl_set_resource_dispatch - [resource->type]); + if (resource->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) { + if (resource->data.common_serial_bus.type > + AML_RESOURCE_MAX_SERIALBUSTYPE) { + conversion_table = NULL; + } else { + /* This is an I2C, SPI, or UART serial_bus descriptor */ + + conversion_table = + acpi_gbl_convert_resource_serial_bus_dispatch + [resource->data.common_serial_bus.type]; + } + } else { + conversion_table = + acpi_gbl_set_resource_dispatch[resource->type]; + } + + if (!conversion_table) { + ACPI_ERROR((AE_INFO, + "Invalid/unsupported resource descriptor: Type 0x%2.2X", + resource->type)); + return (AE_AML_INVALID_RESOURCE_TYPE); + } + + status = acpi_rs_convert_resource_to_aml(resource, + ACPI_CAST_PTR(union + aml_resource, + aml), + conversion_table); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Could not convert resource (type 0x%X) to AML", @@ -192,9 +241,7 @@ acpi_rs_convert_resources_to_aml(struct acpi_resource *resource, /* Point to the next input resource descriptor */ - resource = - ACPI_ADD_PTR(struct acpi_resource, resource, - resource->length); + resource = ACPI_NEXT_RESOURCE(resource); } /* Completed buffer, but did not find an end_tag resource descriptor */ diff --git a/drivers/acpi/acpica/rsmisc.c b/drivers/acpi/acpica/rsmisc.c index 410264b22a29..af3dc63163b6 100644 --- a/drivers/acpi/acpica/rsmisc.c +++ b/drivers/acpi/acpica/rsmisc.c @@ -83,6 +83,10 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource, ACPI_FUNCTION_TRACE(rs_convert_aml_to_resource); + if (!info) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + if (((acpi_size) resource) & 0x3) { /* Each internal resource struct is expected to be 32-bit aligned */ @@ -101,7 +105,6 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource, * table length (# of table entries) */ count = INIT_TABLE_LENGTH(info); - while (count) { /* * Source is the external AML byte stream buffer, @@ -145,6 +148,14 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource, ((ACPI_GET8(source) >> info->value) & 0x03); break; + case ACPI_RSC_3BITFLAG: + /* + * Mask and shift the flag bits + */ + ACPI_SET8(destination) = (u8) + ((ACPI_GET8(source) >> info->value) & 0x07); + break; + case ACPI_RSC_COUNT: item_count = ACPI_GET8(source); @@ -163,6 +174,69 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource, (info->value * (item_count - 1)); break; + case ACPI_RSC_COUNT_GPIO_PIN: + + target = ACPI_ADD_PTR(void, aml, info->value); + item_count = ACPI_GET16(target) - ACPI_GET16(source); + + resource->length = resource->length + item_count; + item_count = item_count / 2; + ACPI_SET16(destination) = item_count; + break; + + case ACPI_RSC_COUNT_GPIO_VEN: + + item_count = ACPI_GET8(source); + ACPI_SET8(destination) = (u8)item_count; + + resource->length = resource->length + + (info->value * item_count); + break; + + case ACPI_RSC_COUNT_GPIO_RES: + + /* + * Vendor data is optional (length/offset may both be zero) + * Examine vendor data length field first + */ + target = ACPI_ADD_PTR(void, aml, (info->value + 2)); + if (ACPI_GET16(target)) { + + /* Use vendor offset to get resource source length */ + + target = ACPI_ADD_PTR(void, aml, info->value); + item_count = + ACPI_GET16(target) - ACPI_GET16(source); + } else { + /* No vendor data to worry about */ + + item_count = aml->large_header.resource_length + + sizeof(struct aml_resource_large_header) - + ACPI_GET16(source); + } + + resource->length = resource->length + item_count; + ACPI_SET16(destination) = item_count; + break; + + case ACPI_RSC_COUNT_SERIAL_VEN: + + item_count = ACPI_GET16(source) - info->value; + + resource->length = resource->length + item_count; + ACPI_SET16(destination) = item_count; + break; + + case ACPI_RSC_COUNT_SERIAL_RES: + + item_count = (aml_resource_length + + sizeof(struct aml_resource_large_header)) + - ACPI_GET16(source) - info->value; + + resource->length = resource->length + item_count; + ACPI_SET16(destination) = item_count; + break; + case ACPI_RSC_LENGTH: resource->length = resource->length + info->value; @@ -183,6 +257,72 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource, info->opcode); break; + case ACPI_RSC_MOVE_GPIO_PIN: + + /* Generate and set the PIN data pointer */ + + target = (char *)ACPI_ADD_PTR(void, resource, + (resource->length - + item_count * 2)); + *(u16 **)destination = ACPI_CAST_PTR(u16, target); + + /* Copy the PIN data */ + + source = ACPI_ADD_PTR(void, aml, ACPI_GET16(source)); + acpi_rs_move_data(target, source, item_count, + info->opcode); + break; + + case ACPI_RSC_MOVE_GPIO_RES: + + /* Generate and set the resource_source string pointer */ + + target = (char *)ACPI_ADD_PTR(void, resource, + (resource->length - + item_count)); + *(u8 **)destination = ACPI_CAST_PTR(u8, target); + + /* Copy the resource_source string */ + + source = ACPI_ADD_PTR(void, aml, ACPI_GET16(source)); + acpi_rs_move_data(target, source, item_count, + info->opcode); + break; + + case ACPI_RSC_MOVE_SERIAL_VEN: + + /* Generate and set the Vendor Data pointer */ + + target = (char *)ACPI_ADD_PTR(void, resource, + (resource->length - + item_count)); + *(u8 **)destination = ACPI_CAST_PTR(u8, target); + + /* Copy the Vendor Data */ + + source = ACPI_ADD_PTR(void, aml, info->value); + acpi_rs_move_data(target, source, item_count, + info->opcode); + break; + + case ACPI_RSC_MOVE_SERIAL_RES: + + /* Generate and set the resource_source string pointer */ + + target = (char *)ACPI_ADD_PTR(void, resource, + (resource->length - + item_count)); + *(u8 **)destination = ACPI_CAST_PTR(u8, target); + + /* Copy the resource_source string */ + + source = + ACPI_ADD_PTR(void, aml, + (ACPI_GET16(source) + info->value)); + acpi_rs_move_data(target, source, item_count, + info->opcode); + break; + case ACPI_RSC_SET8: ACPI_MEMSET(destination, info->aml_offset, info->value); @@ -219,13 +359,18 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource, * Optional resource_source (Index and String). This is the more * complicated case used by the Interrupt() macro */ - target = - ACPI_ADD_PTR(char, resource, - info->aml_offset + (item_count * 4)); + target = ACPI_ADD_PTR(char, resource, + info->aml_offset + + (item_count * 4)); resource->length += acpi_rs_get_resource_source(aml_resource_length, - (acpi_rs_length) (((item_count - 1) * sizeof(u32)) + info->value), destination, aml, target); + (acpi_rs_length) + (((item_count - + 1) * sizeof(u32)) + + info->value), + destination, aml, + target); break; case ACPI_RSC_BITMASK: @@ -327,6 +472,7 @@ acpi_rs_convert_resource_to_aml(struct acpi_resource *resource, { void *source = NULL; void *destination; + char *target; acpi_rsdesc_size aml_length = 0; u8 count; u16 temp16 = 0; @@ -334,6 +480,10 @@ acpi_rs_convert_resource_to_aml(struct acpi_resource *resource, ACPI_FUNCTION_TRACE(rs_convert_resource_to_aml); + if (!info) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + /* * First table entry must be ACPI_RSC_INITxxx and must contain the * table length (# of table entries) @@ -383,6 +533,14 @@ acpi_rs_convert_resource_to_aml(struct acpi_resource *resource, ((ACPI_GET8(source) & 0x03) << info->value); break; + case ACPI_RSC_3BITFLAG: + /* + * Mask and shift the flag bits + */ + ACPI_SET8(destination) |= (u8) + ((ACPI_GET8(source) & 0x07) << info->value); + break; + case ACPI_RSC_COUNT: item_count = ACPI_GET8(source); @@ -400,6 +558,63 @@ acpi_rs_convert_resource_to_aml(struct acpi_resource *resource, acpi_rs_set_resource_length(aml_length, aml); break; + case ACPI_RSC_COUNT_GPIO_PIN: + + item_count = ACPI_GET16(source); + ACPI_SET16(destination) = (u16)aml_length; + + aml_length = (u16)(aml_length + item_count * 2); + target = ACPI_ADD_PTR(void, aml, info->value); + ACPI_SET16(target) = (u16)aml_length; + acpi_rs_set_resource_length(aml_length, aml); + break; + + case ACPI_RSC_COUNT_GPIO_VEN: + + item_count = ACPI_GET16(source); + ACPI_SET16(destination) = (u16)item_count; + + aml_length = + (u16)(aml_length + (info->value * item_count)); + acpi_rs_set_resource_length(aml_length, aml); + break; + + case ACPI_RSC_COUNT_GPIO_RES: + + /* Set resource source string length */ + + item_count = ACPI_GET16(source); + ACPI_SET16(destination) = (u16)aml_length; + + /* Compute offset for the Vendor Data */ + + aml_length = (u16)(aml_length + item_count); + target = ACPI_ADD_PTR(void, aml, info->value); + + /* Set vendor offset only if there is vendor data */ + + if (resource->data.gpio.vendor_length) { + ACPI_SET16(target) = (u16)aml_length; + } + + acpi_rs_set_resource_length(aml_length, aml); + break; + + case ACPI_RSC_COUNT_SERIAL_VEN: + + item_count = ACPI_GET16(source); + ACPI_SET16(destination) = item_count + info->value; + aml_length = (u16)(aml_length + item_count); + acpi_rs_set_resource_length(aml_length, aml); + break; + + case ACPI_RSC_COUNT_SERIAL_RES: + + item_count = ACPI_GET16(source); + aml_length = (u16)(aml_length + item_count); + acpi_rs_set_resource_length(aml_length, aml); + break; + case ACPI_RSC_LENGTH: acpi_rs_set_resource_length(info->value, aml); @@ -417,6 +632,48 @@ acpi_rs_convert_resource_to_aml(struct acpi_resource *resource, info->opcode); break; + case ACPI_RSC_MOVE_GPIO_PIN: + + destination = (char *)ACPI_ADD_PTR(void, aml, + ACPI_GET16 + (destination)); + source = *(u16 **)source; + acpi_rs_move_data(destination, source, item_count, + info->opcode); + break; + + case ACPI_RSC_MOVE_GPIO_RES: + + /* Used for both resource_source string and vendor_data */ + + destination = (char *)ACPI_ADD_PTR(void, aml, + ACPI_GET16 + (destination)); + source = *(u8 **)source; + acpi_rs_move_data(destination, source, item_count, + info->opcode); + break; + + case ACPI_RSC_MOVE_SERIAL_VEN: + + destination = (char *)ACPI_ADD_PTR(void, aml, + (aml_length - + item_count)); + source = *(u8 **)source; + acpi_rs_move_data(destination, source, item_count, + info->opcode); + break; + + case ACPI_RSC_MOVE_SERIAL_RES: + + destination = (char *)ACPI_ADD_PTR(void, aml, + (aml_length - + item_count)); + source = *(u8 **)source; + acpi_rs_move_data(destination, source, item_count, + info->opcode); + break; + case ACPI_RSC_ADDRESS: /* Set the Resource Type, General Flags, and Type-Specific Flags */ diff --git a/drivers/acpi/acpica/rsserial.c b/drivers/acpi/acpica/rsserial.c new file mode 100644 index 000000000000..d0b8e121843a --- /dev/null +++ b/drivers/acpi/acpica/rsserial.c @@ -0,0 +1,441 @@ +/******************************************************************************* + * + * Module Name: rsserial - GPIO/serial_bus resource descriptors + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2011, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" +#include "acresrc.h" + +#define _COMPONENT ACPI_RESOURCES +ACPI_MODULE_NAME("rsserial") + +/******************************************************************************* + * + * acpi_rs_convert_gpio + * + ******************************************************************************/ +struct acpi_rsconvert_info acpi_rs_convert_gpio[17] = { + {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_GPIO, + ACPI_RS_SIZE(struct acpi_resource_gpio), + ACPI_RSC_TABLE_SIZE(acpi_rs_convert_gpio)}, + + {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_GPIO, + sizeof(struct aml_resource_gpio), + 0}, + + /* + * These fields are contiguous in both the source and destination: + * revision_id + * connection_type + */ + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.gpio.revision_id), + AML_OFFSET(gpio.revision_id), + 2}, + + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.gpio.producer_consumer), + AML_OFFSET(gpio.flags), + 0}, + + {ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.gpio.sharable), + AML_OFFSET(gpio.int_flags), + 3}, + + {ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.gpio.io_restriction), + AML_OFFSET(gpio.int_flags), + 0}, + + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.gpio.triggering), + AML_OFFSET(gpio.int_flags), + 0}, + + {ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.gpio.polarity), + AML_OFFSET(gpio.int_flags), + 1}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.gpio.pin_config), + AML_OFFSET(gpio.pin_config), + 1}, + + /* + * These fields are contiguous in both the source and destination: + * drive_strength + * debounce_timeout + */ + {ACPI_RSC_MOVE16, ACPI_RS_OFFSET(data.gpio.drive_strength), + AML_OFFSET(gpio.drive_strength), + 2}, + + /* Pin Table */ + + {ACPI_RSC_COUNT_GPIO_PIN, ACPI_RS_OFFSET(data.gpio.pin_table_length), + AML_OFFSET(gpio.pin_table_offset), + AML_OFFSET(gpio.res_source_offset)}, + + {ACPI_RSC_MOVE_GPIO_PIN, ACPI_RS_OFFSET(data.gpio.pin_table), + AML_OFFSET(gpio.pin_table_offset), + 0}, + + /* Resource Source */ + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.gpio.resource_source.index), + AML_OFFSET(gpio.res_source_index), + 1}, + + {ACPI_RSC_COUNT_GPIO_RES, + ACPI_RS_OFFSET(data.gpio.resource_source.string_length), + AML_OFFSET(gpio.res_source_offset), + AML_OFFSET(gpio.vendor_offset)}, + + {ACPI_RSC_MOVE_GPIO_RES, + ACPI_RS_OFFSET(data.gpio.resource_source.string_ptr), + AML_OFFSET(gpio.res_source_offset), + 0}, + + /* Vendor Data */ + + {ACPI_RSC_COUNT_GPIO_VEN, ACPI_RS_OFFSET(data.gpio.vendor_length), + AML_OFFSET(gpio.vendor_length), + 1}, + + {ACPI_RSC_MOVE_GPIO_RES, ACPI_RS_OFFSET(data.gpio.vendor_data), + AML_OFFSET(gpio.vendor_offset), + 0}, +}; + +/******************************************************************************* + * + * acpi_rs_convert_i2c_serial_bus + * + ******************************************************************************/ + +struct acpi_rsconvert_info acpi_rs_convert_i2c_serial_bus[16] = { + {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_SERIAL_BUS, + ACPI_RS_SIZE(struct acpi_resource_i2c_serialbus), + ACPI_RSC_TABLE_SIZE(acpi_rs_convert_i2c_serial_bus)}, + + {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_SERIAL_BUS, + sizeof(struct aml_resource_i2c_serialbus), + 0}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.common_serial_bus.revision_id), + AML_OFFSET(common_serial_bus.revision_id), + 1}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.common_serial_bus.type), + AML_OFFSET(common_serial_bus.type), + 1}, + + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.common_serial_bus.slave_mode), + AML_OFFSET(common_serial_bus.flags), + 0}, + + {ACPI_RSC_1BITFLAG, + ACPI_RS_OFFSET(data.common_serial_bus.producer_consumer), + AML_OFFSET(common_serial_bus.flags), + 1}, + + {ACPI_RSC_MOVE8, + ACPI_RS_OFFSET(data.common_serial_bus.type_revision_id), + AML_OFFSET(common_serial_bus.type_revision_id), + 1}, + + {ACPI_RSC_MOVE16, + ACPI_RS_OFFSET(data.common_serial_bus.type_data_length), + AML_OFFSET(common_serial_bus.type_data_length), + 1}, + + /* Vendor data */ + + {ACPI_RSC_COUNT_SERIAL_VEN, + ACPI_RS_OFFSET(data.common_serial_bus.vendor_length), + AML_OFFSET(common_serial_bus.type_data_length), + AML_RESOURCE_I2C_MIN_DATA_LEN}, + + {ACPI_RSC_MOVE_SERIAL_VEN, + ACPI_RS_OFFSET(data.common_serial_bus.vendor_data), + 0, + sizeof(struct aml_resource_i2c_serialbus)}, + + /* Resource Source */ + + {ACPI_RSC_MOVE8, + ACPI_RS_OFFSET(data.common_serial_bus.resource_source.index), + AML_OFFSET(common_serial_bus.res_source_index), + 1}, + + {ACPI_RSC_COUNT_SERIAL_RES, + ACPI_RS_OFFSET(data.common_serial_bus.resource_source.string_length), + AML_OFFSET(common_serial_bus.type_data_length), + sizeof(struct aml_resource_common_serialbus)}, + + {ACPI_RSC_MOVE_SERIAL_RES, + ACPI_RS_OFFSET(data.common_serial_bus.resource_source.string_ptr), + AML_OFFSET(common_serial_bus.type_data_length), + sizeof(struct aml_resource_common_serialbus)}, + + /* I2C bus type specific */ + + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.i2c_serial_bus.access_mode), + AML_OFFSET(i2c_serial_bus.type_specific_flags), + 0}, + + {ACPI_RSC_MOVE32, ACPI_RS_OFFSET(data.i2c_serial_bus.connection_speed), + AML_OFFSET(i2c_serial_bus.connection_speed), + 1}, + + {ACPI_RSC_MOVE16, ACPI_RS_OFFSET(data.i2c_serial_bus.slave_address), + AML_OFFSET(i2c_serial_bus.slave_address), + 1}, +}; + +/******************************************************************************* + * + * acpi_rs_convert_spi_serial_bus + * + ******************************************************************************/ + +struct acpi_rsconvert_info acpi_rs_convert_spi_serial_bus[20] = { + {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_SERIAL_BUS, + ACPI_RS_SIZE(struct acpi_resource_spi_serialbus), + ACPI_RSC_TABLE_SIZE(acpi_rs_convert_spi_serial_bus)}, + + {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_SERIAL_BUS, + sizeof(struct aml_resource_spi_serialbus), + 0}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.common_serial_bus.revision_id), + AML_OFFSET(common_serial_bus.revision_id), + 1}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.common_serial_bus.type), + AML_OFFSET(common_serial_bus.type), + 1}, + + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.common_serial_bus.slave_mode), + AML_OFFSET(common_serial_bus.flags), + 0}, + + {ACPI_RSC_1BITFLAG, + ACPI_RS_OFFSET(data.common_serial_bus.producer_consumer), + AML_OFFSET(common_serial_bus.flags), + 1}, + + {ACPI_RSC_MOVE8, + ACPI_RS_OFFSET(data.common_serial_bus.type_revision_id), + AML_OFFSET(common_serial_bus.type_revision_id), + 1}, + + {ACPI_RSC_MOVE16, + ACPI_RS_OFFSET(data.common_serial_bus.type_data_length), + AML_OFFSET(common_serial_bus.type_data_length), + 1}, + + /* Vendor data */ + + {ACPI_RSC_COUNT_SERIAL_VEN, + ACPI_RS_OFFSET(data.common_serial_bus.vendor_length), + AML_OFFSET(common_serial_bus.type_data_length), + AML_RESOURCE_SPI_MIN_DATA_LEN}, + + {ACPI_RSC_MOVE_SERIAL_VEN, + ACPI_RS_OFFSET(data.common_serial_bus.vendor_data), + 0, + sizeof(struct aml_resource_spi_serialbus)}, + + /* Resource Source */ + + {ACPI_RSC_MOVE8, + ACPI_RS_OFFSET(data.common_serial_bus.resource_source.index), + AML_OFFSET(common_serial_bus.res_source_index), + 1}, + + {ACPI_RSC_COUNT_SERIAL_RES, + ACPI_RS_OFFSET(data.common_serial_bus.resource_source.string_length), + AML_OFFSET(common_serial_bus.type_data_length), + sizeof(struct aml_resource_common_serialbus)}, + + {ACPI_RSC_MOVE_SERIAL_RES, + ACPI_RS_OFFSET(data.common_serial_bus.resource_source.string_ptr), + AML_OFFSET(common_serial_bus.type_data_length), + sizeof(struct aml_resource_common_serialbus)}, + + /* Spi bus type specific */ + + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.spi_serial_bus.wire_mode), + AML_OFFSET(spi_serial_bus.type_specific_flags), + 0}, + + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.spi_serial_bus.device_polarity), + AML_OFFSET(spi_serial_bus.type_specific_flags), + 1}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.spi_serial_bus.data_bit_length), + AML_OFFSET(spi_serial_bus.data_bit_length), + 1}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.spi_serial_bus.clock_phase), + AML_OFFSET(spi_serial_bus.clock_phase), + 1}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.spi_serial_bus.clock_polarity), + AML_OFFSET(spi_serial_bus.clock_polarity), + 1}, + + {ACPI_RSC_MOVE16, ACPI_RS_OFFSET(data.spi_serial_bus.device_selection), + AML_OFFSET(spi_serial_bus.device_selection), + 1}, + + {ACPI_RSC_MOVE32, ACPI_RS_OFFSET(data.spi_serial_bus.connection_speed), + AML_OFFSET(spi_serial_bus.connection_speed), + 1}, +}; + +/******************************************************************************* + * + * acpi_rs_convert_uart_serial_bus + * + ******************************************************************************/ + +struct acpi_rsconvert_info acpi_rs_convert_uart_serial_bus[22] = { + {ACPI_RSC_INITGET, ACPI_RESOURCE_TYPE_SERIAL_BUS, + ACPI_RS_SIZE(struct acpi_resource_uart_serialbus), + ACPI_RSC_TABLE_SIZE(acpi_rs_convert_uart_serial_bus)}, + + {ACPI_RSC_INITSET, ACPI_RESOURCE_NAME_SERIAL_BUS, + sizeof(struct aml_resource_uart_serialbus), + 0}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.common_serial_bus.revision_id), + AML_OFFSET(common_serial_bus.revision_id), + 1}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.common_serial_bus.type), + AML_OFFSET(common_serial_bus.type), + 1}, + + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.common_serial_bus.slave_mode), + AML_OFFSET(common_serial_bus.flags), + 0}, + + {ACPI_RSC_1BITFLAG, + ACPI_RS_OFFSET(data.common_serial_bus.producer_consumer), + AML_OFFSET(common_serial_bus.flags), + 1}, + + {ACPI_RSC_MOVE8, + ACPI_RS_OFFSET(data.common_serial_bus.type_revision_id), + AML_OFFSET(common_serial_bus.type_revision_id), + 1}, + + {ACPI_RSC_MOVE16, + ACPI_RS_OFFSET(data.common_serial_bus.type_data_length), + AML_OFFSET(common_serial_bus.type_data_length), + 1}, + + /* Vendor data */ + + {ACPI_RSC_COUNT_SERIAL_VEN, + ACPI_RS_OFFSET(data.common_serial_bus.vendor_length), + AML_OFFSET(common_serial_bus.type_data_length), + AML_RESOURCE_UART_MIN_DATA_LEN}, + + {ACPI_RSC_MOVE_SERIAL_VEN, + ACPI_RS_OFFSET(data.common_serial_bus.vendor_data), + 0, + sizeof(struct aml_resource_uart_serialbus)}, + + /* Resource Source */ + + {ACPI_RSC_MOVE8, + ACPI_RS_OFFSET(data.common_serial_bus.resource_source.index), + AML_OFFSET(common_serial_bus.res_source_index), + 1}, + + {ACPI_RSC_COUNT_SERIAL_RES, + ACPI_RS_OFFSET(data.common_serial_bus.resource_source.string_length), + AML_OFFSET(common_serial_bus.type_data_length), + sizeof(struct aml_resource_common_serialbus)}, + + {ACPI_RSC_MOVE_SERIAL_RES, + ACPI_RS_OFFSET(data.common_serial_bus.resource_source.string_ptr), + AML_OFFSET(common_serial_bus.type_data_length), + sizeof(struct aml_resource_common_serialbus)}, + + /* Uart bus type specific */ + + {ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.uart_serial_bus.flow_control), + AML_OFFSET(uart_serial_bus.type_specific_flags), + 0}, + + {ACPI_RSC_2BITFLAG, ACPI_RS_OFFSET(data.uart_serial_bus.stop_bits), + AML_OFFSET(uart_serial_bus.type_specific_flags), + 2}, + + {ACPI_RSC_3BITFLAG, ACPI_RS_OFFSET(data.uart_serial_bus.data_bits), + AML_OFFSET(uart_serial_bus.type_specific_flags), + 4}, + + {ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.uart_serial_bus.endian), + AML_OFFSET(uart_serial_bus.type_specific_flags), + 7}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.uart_serial_bus.parity), + AML_OFFSET(uart_serial_bus.parity), + 1}, + + {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.uart_serial_bus.lines_enabled), + AML_OFFSET(uart_serial_bus.lines_enabled), + 1}, + + {ACPI_RSC_MOVE16, ACPI_RS_OFFSET(data.uart_serial_bus.rx_fifo_size), + AML_OFFSET(uart_serial_bus.rx_fifo_size), + 1}, + + {ACPI_RSC_MOVE16, ACPI_RS_OFFSET(data.uart_serial_bus.tx_fifo_size), + AML_OFFSET(uart_serial_bus.tx_fifo_size), + 1}, + + {ACPI_RSC_MOVE32, + ACPI_RS_OFFSET(data.uart_serial_bus.default_baud_rate), + AML_OFFSET(uart_serial_bus.default_baud_rate), + 1}, +}; diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c index 231811e56939..4409db8209d7 100644 --- a/drivers/acpi/acpica/rsutils.c +++ b/drivers/acpi/acpica/rsutils.c @@ -144,6 +144,9 @@ acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type) * since there are no alignment or endian issues */ case ACPI_RSC_MOVE8: + case ACPI_RSC_MOVE_GPIO_RES: + case ACPI_RSC_MOVE_SERIAL_VEN: + case ACPI_RSC_MOVE_SERIAL_RES: ACPI_MEMCPY(destination, source, item_count); return; @@ -153,6 +156,7 @@ acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type) * misaligned memory transfers */ case ACPI_RSC_MOVE16: + case ACPI_RSC_MOVE_GPIO_PIN: ACPI_MOVE_16_TO_16(&ACPI_CAST_PTR(u16, destination)[i], &ACPI_CAST_PTR(u16, source)[i]); break; diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c index 6ffd3a8bdaa5..cd7fbbf57f30 100644 --- a/drivers/acpi/acpica/utresrc.c +++ b/drivers/acpi/acpica/utresrc.c @@ -43,7 +43,7 @@ #include #include "accommon.h" -#include "amlresrc.h" +#include "acresrc.h" #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utresrc") @@ -154,6 +154,138 @@ const char *acpi_gbl_typ_decode[] = { "TypeF" }; +const char *acpi_gbl_ppc_decode[] = { + "PullDefault", + "PullUp", + "PullDown", + "PullNone" +}; + +const char *acpi_gbl_ior_decode[] = { + "IoRestrictionNone", + "IoRestrictionInputOnly", + "IoRestrictionOutputOnly", + "IoRestrictionNoneAndPreserve" +}; + +const char *acpi_gbl_dts_decode[] = { + "Width8bit", + "Width16bit", + "Width32bit", + "Width64bit", + "Width128bit", + "Width256bit", +}; + +/* GPIO connection type */ + +const char *acpi_gbl_ct_decode[] = { + "Interrupt", + "I/O" +}; + +/* Serial bus type */ + +const char *acpi_gbl_sbt_decode[] = { + "/* UNKNOWN serial bus type */", + "I2C", + "SPI", + "UART" +}; + +/* I2C serial bus access mode */ + +const char *acpi_gbl_am_decode[] = { + "AddressingMode7Bit", + "AddressingMode10Bit" +}; + +/* I2C serial bus slave mode */ + +const char *acpi_gbl_sm_decode[] = { + "ControllerInitiated", + "DeviceInitiated" +}; + +/* SPI serial bus wire mode */ + +const char *acpi_gbl_wm_decode[] = { + "FourWireMode", + "ThreeWireMode" +}; + +/* SPI serial clock phase */ + +const char *acpi_gbl_cph_decode[] = { + "ClockPhaseFirst", + "ClockPhaseSecond" +}; + +/* SPI serial bus clock polarity */ + +const char *acpi_gbl_cpo_decode[] = { + "ClockPolarityLow", + "ClockPolarityHigh" +}; + +/* SPI serial bus device polarity */ + +const char *acpi_gbl_dp_decode[] = { + "PolarityLow", + "PolarityHigh" +}; + +/* UART serial bus endian */ + +const char *acpi_gbl_ed_decode[] = { + "LittleEndian", + "BigEndian" +}; + +/* UART serial bus bits per byte */ + +const char *acpi_gbl_bpb_decode[] = { + "DataBitsFive", + "DataBitsSix", + "DataBitsSeven", + "DataBitsEight", + "DataBitsNine", + "/* UNKNOWN Bits per byte */", + "/* UNKNOWN Bits per byte */", + "/* UNKNOWN Bits per byte */" +}; + +/* UART serial bus stop bits */ + +const char *acpi_gbl_sb_decode[] = { + "StopBitsNone", + "StopBitsOne", + "StopBitsOnePlusHalf", + "StopBitsTwo" +}; + +/* UART serial bus flow control */ + +const char *acpi_gbl_fc_decode[] = { + "FlowControlNone", + "FlowControlHardware", + "FlowControlXON", + "/* UNKNOWN flow control keyword */" +}; + +/* UART serial bus parity type */ + +const char *acpi_gbl_pt_decode[] = { + "ParityTypeNone", + "ParityTypeEven", + "ParityTypeOdd", + "ParityTypeMark", + "ParityTypeSpace", + "/* UNKNOWN parity keyword */", + "/* UNKNOWN parity keyword */", + "/* UNKNOWN parity keyword */" +}; + #endif /* @@ -173,7 +305,7 @@ const u8 acpi_gbl_resource_aml_sizes[] = { ACPI_AML_SIZE_SMALL(struct aml_resource_end_dependent), ACPI_AML_SIZE_SMALL(struct aml_resource_io), ACPI_AML_SIZE_SMALL(struct aml_resource_fixed_io), - 0, + ACPI_AML_SIZE_SMALL(struct aml_resource_fixed_dma), 0, 0, 0, @@ -193,7 +325,17 @@ const u8 acpi_gbl_resource_aml_sizes[] = { ACPI_AML_SIZE_LARGE(struct aml_resource_address16), ACPI_AML_SIZE_LARGE(struct aml_resource_extended_irq), ACPI_AML_SIZE_LARGE(struct aml_resource_address64), - ACPI_AML_SIZE_LARGE(struct aml_resource_extended_address64) + ACPI_AML_SIZE_LARGE(struct aml_resource_extended_address64), + ACPI_AML_SIZE_LARGE(struct aml_resource_gpio), + 0, + ACPI_AML_SIZE_LARGE(struct aml_resource_common_serialbus), +}; + +const u8 acpi_gbl_resource_aml_serial_bus_sizes[] = { + 0, + ACPI_AML_SIZE_LARGE(struct aml_resource_i2c_serialbus), + ACPI_AML_SIZE_LARGE(struct aml_resource_spi_serialbus), + ACPI_AML_SIZE_LARGE(struct aml_resource_uart_serialbus), }; /* @@ -209,35 +351,49 @@ static const u8 acpi_gbl_resource_types[] = { 0, 0, 0, - ACPI_SMALL_VARIABLE_LENGTH, - ACPI_FIXED_LENGTH, - ACPI_SMALL_VARIABLE_LENGTH, - ACPI_FIXED_LENGTH, - ACPI_FIXED_LENGTH, - ACPI_FIXED_LENGTH, - 0, + ACPI_SMALL_VARIABLE_LENGTH, /* 04 IRQ */ + ACPI_FIXED_LENGTH, /* 05 DMA */ + ACPI_SMALL_VARIABLE_LENGTH, /* 06 start_dependent_functions */ + ACPI_FIXED_LENGTH, /* 07 end_dependent_functions */ + ACPI_FIXED_LENGTH, /* 08 IO */ + ACPI_FIXED_LENGTH, /* 09 fixed_iO */ + ACPI_FIXED_LENGTH, /* 0_a fixed_dMA */ 0, 0, 0, - ACPI_VARIABLE_LENGTH, - ACPI_FIXED_LENGTH, + ACPI_VARIABLE_LENGTH, /* 0_e vendor_short */ + ACPI_FIXED_LENGTH, /* 0_f end_tag */ /* Large descriptors */ 0, - ACPI_FIXED_LENGTH, - ACPI_FIXED_LENGTH, + ACPI_FIXED_LENGTH, /* 01 Memory24 */ + ACPI_FIXED_LENGTH, /* 02 generic_register */ 0, - ACPI_VARIABLE_LENGTH, - ACPI_FIXED_LENGTH, - ACPI_FIXED_LENGTH, - ACPI_VARIABLE_LENGTH, - ACPI_VARIABLE_LENGTH, - ACPI_VARIABLE_LENGTH, - ACPI_VARIABLE_LENGTH, - ACPI_FIXED_LENGTH + ACPI_VARIABLE_LENGTH, /* 04 vendor_long */ + ACPI_FIXED_LENGTH, /* 05 Memory32 */ + ACPI_FIXED_LENGTH, /* 06 memory32_fixed */ + ACPI_VARIABLE_LENGTH, /* 07 Dword* address */ + ACPI_VARIABLE_LENGTH, /* 08 Word* address */ + ACPI_VARIABLE_LENGTH, /* 09 extended_iRQ */ + ACPI_VARIABLE_LENGTH, /* 0_a Qword* address */ + ACPI_FIXED_LENGTH, /* 0_b Extended* address */ + ACPI_VARIABLE_LENGTH, /* 0_c Gpio* */ + 0, + ACPI_VARIABLE_LENGTH /* 0_e *serial_bus */ }; +/* + * For the i_aSL compiler/disassembler, we don't want any error messages + * because the disassembler uses the resource validation code to determine + * if Buffer objects are actually Resource Templates. + */ +#ifdef ACPI_ASL_COMPILER +#define ACPI_RESOURCE_ERROR(plist) +#else +#define ACPI_RESOURCE_ERROR(plist) ACPI_ERROR(plist) +#endif + /******************************************************************************* * * FUNCTION: acpi_ut_walk_aml_resources @@ -265,6 +421,7 @@ acpi_ut_walk_aml_resources(u8 * aml, u8 resource_index; u32 length; u32 offset = 0; + u8 end_tag[2] = { 0x79, 0x00 }; ACPI_FUNCTION_TRACE(ut_walk_aml_resources); @@ -286,6 +443,10 @@ acpi_ut_walk_aml_resources(u8 * aml, status = acpi_ut_validate_resource(aml, &resource_index); if (ACPI_FAILURE(status)) { + /* + * Exit on failure. Cannot continue because the descriptor length + * may be bogus also. + */ return_ACPI_STATUS(status); } @@ -300,7 +461,7 @@ acpi_ut_walk_aml_resources(u8 * aml, user_function(aml, length, offset, resource_index, context); if (ACPI_FAILURE(status)) { - return (status); + return_ACPI_STATUS(status); } } @@ -333,7 +494,19 @@ acpi_ut_walk_aml_resources(u8 * aml, /* Did not find an end_tag descriptor */ - return (AE_AML_NO_RESOURCE_END_TAG); + if (user_function) { + + /* Insert an end_tag anyway. acpi_rs_get_list_length always leaves room */ + + (void)acpi_ut_validate_resource(end_tag, &resource_index); + status = + user_function(end_tag, 2, offset, resource_index, context); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } + + return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); } /******************************************************************************* @@ -354,6 +527,7 @@ acpi_ut_walk_aml_resources(u8 * aml, acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) { + union aml_resource *aml_resource; u8 resource_type; u8 resource_index; acpi_rs_length resource_length; @@ -375,7 +549,7 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) /* Verify the large resource type (name) against the max */ if (resource_type > ACPI_RESOURCE_NAME_LARGE_MAX) { - return (AE_AML_INVALID_RESOURCE_TYPE); + goto invalid_resource; } /* @@ -392,15 +566,17 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) ((resource_type & ACPI_RESOURCE_NAME_SMALL_MASK) >> 3); } - /* Check validity of the resource type, zero indicates name is invalid */ - + /* + * Check validity of the resource type, via acpi_gbl_resource_types. Zero + * indicates an invalid resource. + */ if (!acpi_gbl_resource_types[resource_index]) { - return (AE_AML_INVALID_RESOURCE_TYPE); + goto invalid_resource; } /* - * 2) Validate the resource_length field. This ensures that the length - * is at least reasonable, and guarantees that it is non-zero. + * Validate the resource_length field. This ensures that the length + * is at least reasonable, and guarantees that it is non-zero. */ resource_length = acpi_ut_get_resource_length(aml); minimum_resource_length = acpi_gbl_resource_aml_sizes[resource_index]; @@ -413,7 +589,7 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) /* Fixed length resource, length must match exactly */ if (resource_length != minimum_resource_length) { - return (AE_AML_BAD_RESOURCE_LENGTH); + goto bad_resource_length; } break; @@ -422,7 +598,7 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) /* Variable length resource, length must be at least the minimum */ if (resource_length < minimum_resource_length) { - return (AE_AML_BAD_RESOURCE_LENGTH); + goto bad_resource_length; } break; @@ -432,7 +608,7 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) if ((resource_length > minimum_resource_length) || (resource_length < (minimum_resource_length - 1))) { - return (AE_AML_BAD_RESOURCE_LENGTH); + goto bad_resource_length; } break; @@ -440,7 +616,23 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) /* Shouldn't happen (because of validation earlier), but be sure */ - return (AE_AML_INVALID_RESOURCE_TYPE); + goto invalid_resource; + } + + aml_resource = ACPI_CAST_PTR(union aml_resource, aml); + if (resource_type == ACPI_RESOURCE_NAME_SERIAL_BUS) { + + /* Validate the bus_type field */ + + if ((aml_resource->common_serial_bus.type == 0) || + (aml_resource->common_serial_bus.type > + AML_RESOURCE_MAX_SERIALBUSTYPE)) { + ACPI_RESOURCE_ERROR((AE_INFO, + "Invalid/unsupported SerialBus resource descriptor: BusType 0x%2.2X", + aml_resource->common_serial_bus. + type)); + return (AE_AML_INVALID_RESOURCE_TYPE); + } } /* Optionally return the resource table index */ @@ -450,6 +642,22 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) } return (AE_OK); + + invalid_resource: + + ACPI_RESOURCE_ERROR((AE_INFO, + "Invalid/unsupported resource descriptor: Type 0x%2.2X", + resource_type)); + return (AE_AML_INVALID_RESOURCE_TYPE); + + bad_resource_length: + + ACPI_RESOURCE_ERROR((AE_INFO, + "Invalid resource descriptor length: Type " + "0x%2.2X, Length 0x%4.4X, MinLength 0x%4.4X", + resource_type, resource_length, + minimum_resource_length)); + return (AE_AML_BAD_RESOURCE_LENGTH); } /******************************************************************************* diff --git a/include/acpi/acrestyp.h b/include/acpi/acrestyp.h index 0a66cc45dd6b..3506e39a66b1 100644 --- a/include/acpi/acrestyp.h +++ b/include/acpi/acrestyp.h @@ -61,11 +61,14 @@ typedef u32 acpi_rsdesc_size; /* Max Resource Descriptor size is (Length+3) = (6 #define ACPI_WRITE_COMBINING_MEMORY (u8) 0x02 #define ACPI_PREFETCHABLE_MEMORY (u8) 0x03 +/*! [Begin] no source code translation */ /* * IO Attributes - * The ISA IO ranges are: n000-n0_fFh, n400-n4_fFh, n800-n8_fFh, n_c00-n_cFFh. - * The non-ISA IO ranges are: n100-n3_fFh, n500-n7_fFh, n900-n_bFFh, n_cd0-n_fFFh. + * The ISA IO ranges are: n000-n0FFh, n400-n4FFh, n800-n8FFh, nC00-nCFFh. + * The non-ISA IO ranges are: n100-n3FFh, n500-n7FFh, n900-nBFFh, nCD0-nFFFh. */ +/*! [End] no source code translation !*/ + #define ACPI_NON_ISA_ONLY_RANGES (u8) 0x01 #define ACPI_ISA_ONLY_RANGES (u8) 0x02 #define ACPI_ENTIRE_RANGE (ACPI_NON_ISA_ONLY_RANGES | ACPI_ISA_ONLY_RANGES) @@ -81,16 +84,26 @@ typedef u32 acpi_rsdesc_size; /* Max Resource Descriptor size is (Length+3) = (6 #define ACPI_DECODE_16 (u8) 0x01 /* 16-bit IO address decode */ /* - * IRQ Attributes + * Interrupt attributes - used in multiple descriptors */ + +/* Triggering */ + #define ACPI_LEVEL_SENSITIVE (u8) 0x00 #define ACPI_EDGE_SENSITIVE (u8) 0x01 +/* Polarity */ + #define ACPI_ACTIVE_HIGH (u8) 0x00 #define ACPI_ACTIVE_LOW (u8) 0x01 +#define ACPI_ACTIVE_BOTH (u8) 0x02 + +/* Sharing */ #define ACPI_EXCLUSIVE (u8) 0x00 #define ACPI_SHARED (u8) 0x01 +#define ACPI_EXCLUSIVE_AND_WAKE (u8) 0x02 +#define ACPI_SHARED_AND_WAKE (u8) 0x03 /* * DMA Attributes @@ -127,6 +140,8 @@ typedef u32 acpi_rsdesc_size; /* Max Resource Descriptor size is (Length+3) = (6 #define ACPI_POS_DECODE (u8) 0x00 #define ACPI_SUB_DECODE (u8) 0x01 +/* Producer/Consumer */ + #define ACPI_PRODUCER (u8) 0x00 #define ACPI_CONSUMER (u8) 0x01 @@ -192,6 +207,21 @@ struct acpi_resource_fixed_io { u8 address_length; }; +struct acpi_resource_fixed_dma { + u16 request_lines; + u16 channels; + u8 width; +}; + +/* Values for Width field above */ + +#define ACPI_DMA_WIDTH8 0 +#define ACPI_DMA_WIDTH16 1 +#define ACPI_DMA_WIDTH32 2 +#define ACPI_DMA_WIDTH64 3 +#define ACPI_DMA_WIDTH128 4 +#define ACPI_DMA_WIDTH256 5 + struct acpi_resource_vendor { u16 byte_length; u8 byte_data[1]; @@ -329,6 +359,166 @@ struct acpi_resource_generic_register { u64 address; }; +struct acpi_resource_gpio { + u8 revision_id; + u8 connection_type; + u8 producer_consumer; /* For values, see Producer/Consumer above */ + u8 pin_config; + u8 sharable; /* For values, see Interrupt Attributes above */ + u8 io_restriction; + u8 triggering; /* For values, see Interrupt Attributes above */ + u8 polarity; /* For values, see Interrupt Attributes above */ + u16 drive_strength; + u16 debounce_timeout; + u16 pin_table_length; + u16 vendor_length; + struct acpi_resource_source resource_source; + u16 *pin_table; + u8 *vendor_data; +}; + +/* Values for GPIO connection_type field above */ + +#define ACPI_RESOURCE_GPIO_TYPE_INT 0 +#define ACPI_RESOURCE_GPIO_TYPE_IO 1 + +/* Values for pin_config field above */ + +#define ACPI_PIN_CONFIG_DEFAULT 0 +#define ACPI_PIN_CONFIG_PULLUP 1 +#define ACPI_PIN_CONFIG_PULLDOWN 2 +#define ACPI_PIN_CONFIG_NOPULL 3 + +/* Values for io_restriction field above */ + +#define ACPI_IO_RESTRICT_NONE 0 +#define ACPI_IO_RESTRICT_INPUT 1 +#define ACPI_IO_RESTRICT_OUTPUT 2 +#define ACPI_IO_RESTRICT_NONE_PRESERVE 3 + +/* Common structure for I2C, SPI, and UART serial descriptors */ + +#define ACPI_RESOURCE_SERIAL_COMMON \ + u8 revision_id; \ + u8 type; \ + u8 producer_consumer; /* For values, see Producer/Consumer above */\ + u8 slave_mode; \ + u8 type_revision_id; \ + u16 type_data_length; \ + u16 vendor_length; \ + struct acpi_resource_source resource_source; \ + u8 *vendor_data; + +struct acpi_resource_common_serialbus { +ACPI_RESOURCE_SERIAL_COMMON}; + +/* Values for the Type field above */ + +#define ACPI_RESOURCE_SERIAL_TYPE_I2C 1 +#define ACPI_RESOURCE_SERIAL_TYPE_SPI 2 +#define ACPI_RESOURCE_SERIAL_TYPE_UART 3 + +/* Values for slave_mode field above */ + +#define ACPI_CONTROLLER_INITIATED 0 +#define ACPI_DEVICE_INITIATED 1 + +struct acpi_resource_i2c_serialbus { + ACPI_RESOURCE_SERIAL_COMMON u8 access_mode; + u16 slave_address; + u32 connection_speed; +}; + +/* Values for access_mode field above */ + +#define ACPI_I2C_7BIT_MODE 0 +#define ACPI_I2C_10BIT_MODE 1 + +struct acpi_resource_spi_serialbus { + ACPI_RESOURCE_SERIAL_COMMON u8 wire_mode; + u8 device_polarity; + u8 data_bit_length; + u8 clock_phase; + u8 clock_polarity; + u16 device_selection; + u32 connection_speed; +}; + +/* Values for wire_mode field above */ + +#define ACPI_SPI_4WIRE_MODE 0 +#define ACPI_SPI_3WIRE_MODE 1 + +/* Values for device_polarity field above */ + +#define ACPI_SPI_ACTIVE_LOW 0 +#define ACPI_SPI_ACTIVE_HIGH 1 + +/* Values for clock_phase field above */ + +#define ACPI_SPI_FIRST_PHASE 0 +#define ACPI_SPI_SECOND_PHASE 1 + +/* Values for clock_polarity field above */ + +#define ACPI_SPI_START_LOW 0 +#define ACPI_SPI_START_HIGH 1 + +struct acpi_resource_uart_serialbus { + ACPI_RESOURCE_SERIAL_COMMON u8 endian; + u8 data_bits; + u8 stop_bits; + u8 flow_control; + u8 parity; + u8 lines_enabled; + u16 rx_fifo_size; + u16 tx_fifo_size; + u32 default_baud_rate; +}; + +/* Values for Endian field above */ + +#define ACPI_UART_LITTLE_ENDIAN 0 +#define ACPI_UART_BIG_ENDIAN 1 + +/* Values for data_bits field above */ + +#define ACPI_UART_5_DATA_BITS 0 +#define ACPI_UART_6_DATA_BITS 1 +#define ACPI_UART_7_DATA_BITS 2 +#define ACPI_UART_8_DATA_BITS 3 +#define ACPI_UART_9_DATA_BITS 4 + +/* Values for stop_bits field above */ + +#define ACPI_UART_NO_STOP_BITS 0 +#define ACPI_UART_1_STOP_BIT 1 +#define ACPI_UART_1P5_STOP_BITS 2 +#define ACPI_UART_2_STOP_BITS 3 + +/* Values for flow_control field above */ + +#define ACPI_UART_FLOW_CONTROL_NONE 0 +#define ACPI_UART_FLOW_CONTROL_HW 1 +#define ACPI_UART_FLOW_CONTROL_XON_XOFF 2 + +/* Values for Parity field above */ + +#define ACPI_UART_PARITY_NONE 0 +#define ACPI_UART_PARITY_EVEN 1 +#define ACPI_UART_PARITY_ODD 2 +#define ACPI_UART_PARITY_MARK 3 +#define ACPI_UART_PARITY_SPACE 4 + +/* Values for lines_enabled bitfield above */ + +#define ACPI_UART_CARRIER_DETECT (1<<2) +#define ACPI_UART_RING_INDICATOR (1<<3) +#define ACPI_UART_DATA_SET_READY (1<<4) +#define ACPI_UART_DATA_TERMINAL_READY (1<<5) +#define ACPI_UART_CLEAR_TO_SEND (1<<6) +#define ACPI_UART_REQUEST_TO_SEND (1<<7) + /* ACPI_RESOURCE_TYPEs */ #define ACPI_RESOURCE_TYPE_IRQ 0 @@ -348,7 +538,10 @@ struct acpi_resource_generic_register { #define ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS64 14 /* ACPI 3.0 */ #define ACPI_RESOURCE_TYPE_EXTENDED_IRQ 15 #define ACPI_RESOURCE_TYPE_GENERIC_REGISTER 16 -#define ACPI_RESOURCE_TYPE_MAX 16 +#define ACPI_RESOURCE_TYPE_GPIO 17 /* ACPI 5.0 */ +#define ACPI_RESOURCE_TYPE_FIXED_DMA 18 /* ACPI 5.0 */ +#define ACPI_RESOURCE_TYPE_SERIAL_BUS 19 /* ACPI 5.0 */ +#define ACPI_RESOURCE_TYPE_MAX 19 /* Master union for resource descriptors */ @@ -358,6 +551,7 @@ union acpi_resource_data { struct acpi_resource_start_dependent start_dpf; struct acpi_resource_io io; struct acpi_resource_fixed_io fixed_io; + struct acpi_resource_fixed_dma fixed_dma; struct acpi_resource_vendor vendor; struct acpi_resource_vendor_typed vendor_typed; struct acpi_resource_end_tag end_tag; @@ -370,6 +564,11 @@ union acpi_resource_data { struct acpi_resource_extended_address64 ext_address64; struct acpi_resource_extended_irq extended_irq; struct acpi_resource_generic_register generic_reg; + struct acpi_resource_gpio gpio; + struct acpi_resource_i2c_serialbus i2c_serial_bus; + struct acpi_resource_spi_serialbus spi_serial_bus; + struct acpi_resource_uart_serialbus uart_serial_bus; + struct acpi_resource_common_serialbus common_serial_bus; /* Common fields */ -- cgit v1.2.3 From a91cdde20a870bd773d605c764ed211539bf3020 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 16 Nov 2011 14:46:57 +0800 Subject: ACPI 5.0: New interface, acpi_get_event_resources Executes _AEI and formats the result, similar to acpi_get_current_resources, etc. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acresrc.h | 4 ++++ drivers/acpi/acpica/rsutils.c | 50 +++++++++++++++++++++++++++++++++++++++++++ drivers/acpi/acpica/rsxface.c | 40 ++++++++++++++++++++++++++++++++++ include/acpi/acpixf.h | 4 ++++ 4 files changed, 98 insertions(+) (limited to 'include/acpi') diff --git a/drivers/acpi/acpica/acresrc.h b/drivers/acpi/acpica/acresrc.h index 05721b023f88..61b2e049d8d6 100644 --- a/drivers/acpi/acpica/acresrc.h +++ b/drivers/acpi/acpica/acresrc.h @@ -215,6 +215,10 @@ acpi_status acpi_rs_set_srs_method_data(struct acpi_namespace_node *node, struct acpi_buffer *ret_buffer); +acpi_status +acpi_rs_get_aei_method_data(struct acpi_namespace_node *node, + struct acpi_buffer *ret_buffer); + /* * rscalc */ diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c index 4409db8209d7..54a9a974b624 100644 --- a/drivers/acpi/acpica/rsutils.c +++ b/drivers/acpi/acpica/rsutils.c @@ -592,6 +592,56 @@ acpi_rs_get_prs_method_data(struct acpi_namespace_node *node, } #endif /* ACPI_FUTURE_USAGE */ +/******************************************************************************* + * + * FUNCTION: acpi_rs_get_aei_method_data + * + * PARAMETERS: Node - Device node + * ret_buffer - Pointer to a buffer structure for the + * results + * + * RETURN: Status + * + * DESCRIPTION: This function is called to get the _AEI value of an object + * contained in an object specified by the handle passed in + * + * If the function fails an appropriate status will be returned + * and the contents of the callers buffer is undefined. + * + ******************************************************************************/ + +acpi_status +acpi_rs_get_aei_method_data(struct acpi_namespace_node *node, + struct acpi_buffer *ret_buffer) +{ + union acpi_operand_object *obj_desc; + acpi_status status; + + ACPI_FUNCTION_TRACE(rs_get_aei_method_data); + + /* Parameters guaranteed valid by caller */ + + /* Execute the method, no parameters */ + + status = acpi_ut_evaluate_object(node, METHOD_NAME__AEI, + ACPI_BTYPE_BUFFER, &obj_desc); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* + * Make the call to create a resource linked list from the + * byte stream buffer that comes back from the _CRS method + * execution. + */ + status = acpi_rs_create_resource_list(obj_desc, ret_buffer); + + /* On exit, we must delete the object returned by evaluate_object */ + + acpi_ut_remove_reference(obj_desc); + return_ACPI_STATUS(status); +} + /******************************************************************************* * * FUNCTION: acpi_rs_get_method_data diff --git a/drivers/acpi/acpica/rsxface.c b/drivers/acpi/acpica/rsxface.c index fe86b37b16ce..45a9e5e4e4db 100644 --- a/drivers/acpi/acpica/rsxface.c +++ b/drivers/acpi/acpica/rsxface.c @@ -307,6 +307,46 @@ acpi_set_current_resources(acpi_handle device_handle, ACPI_EXPORT_SYMBOL(acpi_set_current_resources) +/******************************************************************************* + * + * FUNCTION: acpi_get_event_resources + * + * PARAMETERS: device_handle - Handle to the device object for the + * device we are getting resources + * in_buffer - Pointer to a buffer containing the + * resources to be set for the device + * + * RETURN: Status + * + * DESCRIPTION: This function is called to get the event resources for a + * specific device. The caller must first acquire a handle for + * the desired device. The resource data is passed to the routine + * the buffer pointed to by the in_buffer variable. Uses the + * _AEI method. + * + ******************************************************************************/ +acpi_status +acpi_get_event_resources(acpi_handle device_handle, + struct acpi_buffer *ret_buffer) +{ + acpi_status status; + struct acpi_namespace_node *node; + + ACPI_FUNCTION_TRACE(acpi_get_event_resources); + + /* Validate parameters then dispatch to internal routine */ + + status = acpi_rs_validate_parameters(device_handle, ret_buffer, &node); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_rs_get_aei_method_data(node, ret_buffer); + return_ACPI_STATUS(status); +} + +ACPI_EXPORT_SYMBOL(acpi_get_event_resources) + /****************************************************************************** * * FUNCTION: acpi_resource_to_address64 diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index dd86610039b3..726d937ef5b1 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -357,6 +357,10 @@ acpi_status acpi_get_possible_resources(acpi_handle device, struct acpi_buffer *ret_buffer); #endif +acpi_status +acpi_get_event_resources(acpi_handle device_handle, + struct acpi_buffer *ret_buffer); + acpi_status acpi_walk_resources(acpi_handle device, char *name, -- cgit v1.2.3 From 0e243178047c0219b3367dd44f81040826b7ea83 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 16 Nov 2011 14:51:01 +0800 Subject: ACPI 5.0: New interface, acpi_buffer_to_resource This interface converts an AML buffer to an internal ACPI_RESOURCE. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/rscreate.c | 64 ++++++++++++++++++++++++++++++++++++++++++ include/acpi/acpixf.h | 5 ++++ 2 files changed, 69 insertions(+) (limited to 'include/acpi') diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c index f61285d5edc3..06264e8b58d9 100644 --- a/drivers/acpi/acpica/rscreate.c +++ b/drivers/acpi/acpica/rscreate.c @@ -49,6 +49,70 @@ #define _COMPONENT ACPI_RESOURCES ACPI_MODULE_NAME("rscreate") +/******************************************************************************* + * + * FUNCTION: acpi_buffer_to_resource + * + * PARAMETERS: aml_buffer - Pointer to the resource byte stream + * aml_buffer_length - Length of the aml_buffer + * resource_ptr - Where the converted resource is returned + * + * RETURN: Status + * + * DESCRIPTION: Convert a raw AML buffer to a resource list + * + ******************************************************************************/ +acpi_status +acpi_buffer_to_resource(u8 *aml_buffer, + u16 aml_buffer_length, + struct acpi_resource **resource_ptr) +{ + acpi_status status; + acpi_size list_size_needed; + void *resource; + void *current_resource_ptr; + + /* + * Note: we allow AE_AML_NO_RESOURCE_END_TAG, since an end tag + * is not required here. + */ + + /* Get the required length for the converted resource */ + + status = acpi_rs_get_list_length(aml_buffer, aml_buffer_length, + &list_size_needed); + if (status == AE_AML_NO_RESOURCE_END_TAG) { + status = AE_OK; + } + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Allocate a buffer for the converted resource */ + + resource = ACPI_ALLOCATE_ZEROED(list_size_needed); + current_resource_ptr = resource; + if (!resource) { + return (AE_NO_MEMORY); + } + + /* Perform the AML-to-Resource conversion */ + + status = acpi_ut_walk_aml_resources(aml_buffer, aml_buffer_length, + acpi_rs_convert_aml_to_resources, + ¤t_resource_ptr); + if (status == AE_AML_NO_RESOURCE_END_TAG) { + status = AE_OK; + } + if (ACPI_FAILURE(status)) { + ACPI_FREE(resource); + } else { + *resource_ptr = resource; + } + + return (status); +} + /******************************************************************************* * * FUNCTION: acpi_rs_create_resource_list diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 726d937ef5b1..5d8df1dfb203 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -376,6 +376,11 @@ acpi_status acpi_resource_to_address64(struct acpi_resource *resource, struct acpi_resource_address64 *out); +acpi_status +acpi_buffer_to_resource(u8 *aml_buffer, + u16 aml_buffer_length, + struct acpi_resource **resource_ptr); + /* * Hardware (ACPI device) interfaces */ -- cgit v1.2.3 From 25169b77f7c33b363db7d099d67491e977cdefc7 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 16 Nov 2011 17:03:54 +0800 Subject: ACPI 5.0: Allow _AEI method in walk resources _AEI contains a resource template, this change adds support for the walk resources function. Signed-off-by: Zhang Rui Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/rsxface.c | 10 ++++++---- include/acpi/acnames.h | 1 + 2 files changed, 7 insertions(+), 4 deletions(-) (limited to 'include/acpi') diff --git a/drivers/acpi/acpica/rsxface.c b/drivers/acpi/acpica/rsxface.c index 45a9e5e4e4db..f6cceaccc3e9 100644 --- a/drivers/acpi/acpica/rsxface.c +++ b/drivers/acpi/acpica/rsxface.c @@ -526,8 +526,9 @@ acpi_rs_match_vendor_resource(struct acpi_resource *resource, void *context) * * PARAMETERS: device_handle - Handle to the device object for the * device we are querying - * Name - Method name of the resources we want - * (METHOD_NAME__CRS or METHOD_NAME__PRS) + * Name - Method name of the resources we want. + * (METHOD_NAME__CRS, METHOD_NAME__PRS, or + * METHOD_NAME__AEI) * user_function - Called for each resource * Context - Passed to user_function * @@ -554,11 +555,12 @@ acpi_walk_resources(acpi_handle device_handle, if (!device_handle || !user_function || !name || (!ACPI_COMPARE_NAME(name, METHOD_NAME__CRS) && - !ACPI_COMPARE_NAME(name, METHOD_NAME__PRS))) { + !ACPI_COMPARE_NAME(name, METHOD_NAME__PRS) && + !ACPI_COMPARE_NAME(name, METHOD_NAME__AEI))) { return_ACPI_STATUS(AE_BAD_PARAMETER); } - /* Get the _CRS or _PRS resource list */ + /* Get the _CRS/_PRS/_AEI resource list */ buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER; status = acpi_rs_get_method_data(device_handle, name, &buffer); diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h index fc1575fd4596..5b5af0d30a97 100644 --- a/include/acpi/acnames.h +++ b/include/acpi/acnames.h @@ -58,6 +58,7 @@ #define METHOD_NAME__PRT "_PRT" #define METHOD_NAME__CRS "_CRS" #define METHOD_NAME__PRS "_PRS" +#define METHOD_NAME__AEI "_AEI" #define METHOD_NAME__PRW "_PRW" #define METHOD_NAME__SRS "_SRS" -- cgit v1.2.3 From 240c320c59aba93605bff761ceb698df3ee90761 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Mon, 28 Nov 2011 10:18:24 +0800 Subject: ACPICA: Update to version 20111123 This version contains full support for the ACPI 5.0 specification. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- include/acpi/acpixf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/acpi') diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 5d8df1dfb203..30f5bef4f14d 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -47,7 +47,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20110623 +#define ACPI_CA_VERSION 0x20111123 #include "actypes.h" #include "actbl.h" -- cgit v1.2.3 From f654c0fefa8c16d439185b61442710fadc167e78 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 12 Jan 2012 13:10:32 +0800 Subject: ACPICA: Add support for region address conflict checking Allows drivers to determine if any memory or I/O addresses will conflict with addresses used by ACPI operation regions. Introduces a new interface, acpi_check_address_range. http://marc.info/?t=132251388700002&r=1&w=2 Reported-and-tested-by: Luca Tettamanti Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown --- drivers/acpi/acpica/Makefile | 1 + drivers/acpi/acpica/acconfig.h | 4 + drivers/acpi/acpica/acglobal.h | 2 + drivers/acpi/acpica/aclocal.h | 9 ++ drivers/acpi/acpica/acutils.h | 18 +++ drivers/acpi/acpica/dsargs.c | 30 ++-- drivers/acpi/acpica/utaddress.c | 294 ++++++++++++++++++++++++++++++++++++++++ drivers/acpi/acpica/utdelete.c | 13 +- drivers/acpi/acpica/utglobal.c | 6 + drivers/acpi/acpica/utinit.c | 1 + drivers/acpi/acpica/utxface.c | 38 ++++++ drivers/acpi/osl.c | 202 ++------------------------- include/acpi/acpiosxf.h | 7 - include/acpi/acpixf.h | 5 + 14 files changed, 408 insertions(+), 222 deletions(-) create mode 100644 drivers/acpi/acpica/utaddress.c (limited to 'include/acpi') diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 5f7d0cd11002..0ca208b6dcf0 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -135,6 +135,7 @@ acpi-y += \ tbxfroot.o acpi-y += \ + utaddress.o \ utalloc.o \ utcopy.o \ utdebug.o \ diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index f467d49c1ace..4925aa5817f4 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -123,6 +123,10 @@ #define ACPI_MAX_SLEEP 2000 /* Two seconds */ +/* Address Range lists are per-space_id (Memory and I/O only) */ + +#define ACPI_ADDRESS_RANGE_MAX 2 + /****************************************************************************** * * ACPI Specification constants (Do not change unless the specification changes) diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 25912a93dea7..dd5a3e341214 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -306,6 +306,8 @@ ACPI_EXTERN u8 acpi_gbl_acpi_hardware_present; ACPI_EXTERN u8 acpi_gbl_events_initialized; ACPI_EXTERN u8 acpi_gbl_osi_data; ACPI_EXTERN struct acpi_interface_info *acpi_gbl_supported_interfaces; +ACPI_EXTERN struct acpi_address_range + *acpi_gbl_address_range_list[ACPI_ADDRESS_RANGE_MAX]; #ifndef DEFINE_ACPI_GLOBALS diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 2ddd61d07a06..d3b6f29cc41b 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -630,6 +630,15 @@ union acpi_generic_state { typedef acpi_status(*ACPI_EXECUTE_OP) (struct acpi_walk_state * walk_state); +/* Address Range info block */ + +struct acpi_address_range { + struct acpi_address_range *next; + struct acpi_namespace_node *region_node; + acpi_physical_address start_address; + acpi_physical_address end_address; +}; + /***************************************************************************** * * Parser typedefs and structs diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index ab95d452f87d..57df29360b9f 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -579,6 +579,24 @@ acpi_ut_create_list(char *list_name, #endif /* ACPI_DBG_TRACK_ALLOCATIONS */ +/* + * utaddress - address range check + */ +acpi_status +acpi_ut_add_address_range(acpi_adr_space_type space_id, + acpi_physical_address address, + u32 length, struct acpi_namespace_node *region_node); + +void +acpi_ut_remove_address_range(acpi_adr_space_type space_id, + struct acpi_namespace_node *region_node); + +u32 +acpi_ut_check_address_range(acpi_adr_space_type space_id, + acpi_physical_address address, u32 length, u8 warn); + +void acpi_ut_delete_address_lists(void); + /* * utxferror - various error/warning output functions */ diff --git a/drivers/acpi/acpica/dsargs.c b/drivers/acpi/acpica/dsargs.c index d69e4a53175b..19c2be941e78 100644 --- a/drivers/acpi/acpica/dsargs.c +++ b/drivers/acpi/acpica/dsargs.c @@ -250,6 +250,13 @@ acpi_ds_get_bank_field_arguments(union acpi_operand_object *obj_desc) status = acpi_ds_execute_arguments(node, node->parent, extra_desc->extra.aml_length, extra_desc->extra.aml_start); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + status = acpi_ut_add_address_range(obj_desc->region.space_id, + obj_desc->region.address, + obj_desc->region.length, node); return_ACPI_STATUS(status); } @@ -391,25 +398,8 @@ acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc) return_ACPI_STATUS(status); } - /* Validate the region address/length via the host OS */ - - status = acpi_os_validate_address(obj_desc->region.space_id, - obj_desc->region.address, - (acpi_size) obj_desc->region.length, - acpi_ut_get_node_name(node)); - - if (ACPI_FAILURE(status)) { - /* - * Invalid address/length. We will emit an error message and mark - * the region as invalid, so that it will cause an additional error if - * it is ever used. Then return AE_OK. - */ - ACPI_EXCEPTION((AE_INFO, status, - "During address validation of OpRegion [%4.4s]", - node->name.ascii)); - obj_desc->common.flags |= AOPOBJ_INVALID; - status = AE_OK; - } - + status = acpi_ut_add_address_range(obj_desc->region.space_id, + obj_desc->region.address, + obj_desc->region.length, node); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/utaddress.c b/drivers/acpi/acpica/utaddress.c new file mode 100644 index 000000000000..67932aebe6dd --- /dev/null +++ b/drivers/acpi/acpica/utaddress.c @@ -0,0 +1,294 @@ +/****************************************************************************** + * + * Module Name: utaddress - op_region address range check + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2012, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" +#include "acnamesp.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utaddress") + +/******************************************************************************* + * + * FUNCTION: acpi_ut_add_address_range + * + * PARAMETERS: space_id - Address space ID + * Address - op_region start address + * Length - op_region length + * region_node - op_region namespace node + * + * RETURN: Status + * + * DESCRIPTION: Add the Operation Region address range to the global list. + * The only supported Space IDs are Memory and I/O. Called when + * the op_region address/length operands are fully evaluated. + * + * MUTEX: Locks the namespace + * + * NOTE: Because this interface is only called when an op_region argument + * list is evaluated, there cannot be any duplicate region_nodes. + * Duplicate Address/Length values are allowed, however, so that multiple + * address conflicts can be detected. + * + ******************************************************************************/ +acpi_status +acpi_ut_add_address_range(acpi_adr_space_type space_id, + acpi_physical_address address, + u32 length, struct acpi_namespace_node *region_node) +{ + struct acpi_address_range *range_info; + acpi_status status; + + ACPI_FUNCTION_TRACE(ut_add_address_range); + + if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && + (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { + return_ACPI_STATUS(AE_OK); + } + + /* Allocate/init a new info block, add it to the appropriate list */ + + range_info = ACPI_ALLOCATE(sizeof(struct acpi_address_range)); + if (!range_info) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + range_info->start_address = address; + range_info->end_address = (address + length - 1); + range_info->region_node = region_node; + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + ACPI_FREE(range_info); + return_ACPI_STATUS(status); + } + + range_info->next = acpi_gbl_address_range_list[space_id]; + acpi_gbl_address_range_list[space_id] = range_info; + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, + "\nAdded [%4.4s] address range: 0x%p-0x%p\n", + acpi_ut_get_node_name(range_info->region_node), + ACPI_CAST_PTR(void, address), + ACPI_CAST_PTR(void, range_info->end_address))); + + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_remove_address_range + * + * PARAMETERS: space_id - Address space ID + * region_node - op_region namespace node + * + * RETURN: None + * + * DESCRIPTION: Remove the Operation Region from the global list. The only + * supported Space IDs are Memory and I/O. Called when an + * op_region is deleted. + * + * MUTEX: Assumes the namespace is locked + * + ******************************************************************************/ + +void +acpi_ut_remove_address_range(acpi_adr_space_type space_id, + struct acpi_namespace_node *region_node) +{ + struct acpi_address_range *range_info; + struct acpi_address_range *prev; + + ACPI_FUNCTION_TRACE(ut_remove_address_range); + + if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && + (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { + return_VOID; + } + + /* Get the appropriate list head and check the list */ + + range_info = prev = acpi_gbl_address_range_list[space_id]; + while (range_info) { + if (range_info->region_node == region_node) { + if (range_info == prev) { /* Found at list head */ + acpi_gbl_address_range_list[space_id] = + range_info->next; + } else { + prev->next = range_info->next; + } + + ACPI_DEBUG_PRINT((ACPI_DB_NAMES, + "\nRemoved [%4.4s] address range: 0x%p-0x%p\n", + acpi_ut_get_node_name(range_info-> + region_node), + ACPI_CAST_PTR(void, + range_info-> + start_address), + ACPI_CAST_PTR(void, + range_info-> + end_address))); + + ACPI_FREE(range_info); + return_VOID; + } + + prev = range_info; + range_info = range_info->next; + } + + return_VOID; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_check_address_range + * + * PARAMETERS: space_id - Address space ID + * Address - Start address + * Length - Length of address range + * Warn - TRUE if warning on overlap desired + * + * RETURN: Count of the number of conflicts detected. Zero is always + * returned for Space IDs other than Memory or I/O. + * + * DESCRIPTION: Check if the input address range overlaps any of the + * ASL operation region address ranges. The only supported + * Space IDs are Memory and I/O. + * + * MUTEX: Assumes the namespace is locked. + * + ******************************************************************************/ + +u32 +acpi_ut_check_address_range(acpi_adr_space_type space_id, + acpi_physical_address address, u32 length, u8 warn) +{ + struct acpi_address_range *range_info; + acpi_physical_address end_address; + char *pathname; + u32 overlap_count = 0; + + ACPI_FUNCTION_TRACE(ut_check_address_range); + + if ((space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) && + (space_id != ACPI_ADR_SPACE_SYSTEM_IO)) { + return_UINT32(0); + } + + range_info = acpi_gbl_address_range_list[space_id]; + end_address = address + length - 1; + + /* Check entire list for all possible conflicts */ + + while (range_info) { + /* + * Check if the requested Address/Length overlaps this address_range. + * Four cases to consider: + * + * 1) Input address/length is contained completely in the address range + * 2) Input address/length overlaps range at the range start + * 3) Input address/length overlaps range at the range end + * 4) Input address/length completely encompasses the range + */ + if ((address <= range_info->end_address) && + (end_address >= range_info->start_address)) { + + /* Found an address range overlap */ + + overlap_count++; + if (warn) { /* Optional warning message */ + pathname = + acpi_ns_get_external_pathname(range_info-> + region_node); + + ACPI_WARNING((AE_INFO, + "0x%p-0x%p %s conflicts with Region %s %d", + ACPI_CAST_PTR(void, address), + ACPI_CAST_PTR(void, end_address), + acpi_ut_get_region_name(space_id), + pathname, overlap_count)); + ACPI_FREE(pathname); + } + } + + range_info = range_info->next; + } + + return_UINT32(overlap_count); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_delete_address_lists + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Delete all global address range lists (called during + * subsystem shutdown). + * + ******************************************************************************/ + +void acpi_ut_delete_address_lists(void) +{ + struct acpi_address_range *next; + struct acpi_address_range *range_info; + int i; + + /* Delete all elements in all address range lists */ + + for (i = 0; i < ACPI_ADDRESS_RANGE_MAX; i++) { + next = acpi_gbl_address_range_list[i]; + + while (next) { + range_info = next; + next = range_info->next; + ACPI_FREE(range_info); + } + + acpi_gbl_address_range_list[i] = NULL; + } +} diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c index 31f5a7832ef1..93ec06b0fe25 100644 --- a/drivers/acpi/acpica/utdelete.c +++ b/drivers/acpi/acpica/utdelete.c @@ -215,11 +215,14 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object) ACPI_DEBUG_PRINT((ACPI_DB_ALLOCATIONS, "***** Region %p\n", object)); - /* Invalidate the region address/length via the host OS */ - - acpi_os_invalidate_address(object->region.space_id, - object->region.address, - (acpi_size) object->region.length); + /* + * Update address_range list. However, only permanent regions + * are installed in this list. (Not created within a method) + */ + if (!(object->region.node->flags & ANOBJ_TEMPORARY)) { + acpi_ut_remove_address_range(object->region.space_id, + object->region.node); + } second_desc = acpi_ns_get_secondary_object(object); if (second_desc) { diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c index ffba0a39c3e8..3cf758bab242 100644 --- a/drivers/acpi/acpica/utglobal.c +++ b/drivers/acpi/acpica/utglobal.c @@ -264,6 +264,12 @@ acpi_status acpi_ut_init_globals(void) return_ACPI_STATUS(status); } + /* Address Range lists */ + + for (i = 0; i < ACPI_ADDRESS_RANGE_MAX; i++) { + acpi_gbl_address_range_list[i] = NULL; + } + /* Mutex locked flags */ for (i = 0; i < ACPI_NUM_MUTEX; i++) { diff --git a/drivers/acpi/acpica/utinit.c b/drivers/acpi/acpica/utinit.c index 191b6828cce9..cab61a05d21d 100644 --- a/drivers/acpi/acpica/utinit.c +++ b/drivers/acpi/acpica/utinit.c @@ -92,6 +92,7 @@ static void acpi_ut_terminate(void) gpe_xrupt_info = next_gpe_xrupt_info; } + acpi_ut_delete_address_lists(); return_VOID; } diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c index 420ebfe08c72..15cbddebb6b4 100644 --- a/drivers/acpi/acpica/utxface.c +++ b/drivers/acpi/acpica/utxface.c @@ -48,6 +48,7 @@ #include "acnamesp.h" #include "acdebug.h" #include "actables.h" +#include "acinterp.h" #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utxface") @@ -640,4 +641,41 @@ acpi_status acpi_install_interface_handler(acpi_interface_handler handler) } ACPI_EXPORT_SYMBOL(acpi_install_interface_handler) + +/***************************************************************************** + * + * FUNCTION: acpi_check_address_range + * + * PARAMETERS: space_id - Address space ID + * Address - Start address + * Length - Length + * Warn - TRUE if warning on overlap desired + * + * RETURN: Count of the number of conflicts detected. + * + * DESCRIPTION: Check if the input address range overlaps any of the + * ASL operation region address ranges. + * + ****************************************************************************/ +u32 +acpi_check_address_range(acpi_adr_space_type space_id, + acpi_physical_address address, + acpi_size length, u8 warn) +{ + u32 overlaps; + acpi_status status; + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + if (ACPI_FAILURE(status)) { + return (0); + } + + overlaps = acpi_ut_check_address_range(space_id, address, + (u32)length, warn); + + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + return (overlaps); +} + +ACPI_EXPORT_SYMBOL(acpi_check_address_range) #endif /* !ACPI_ASL_COMPILER */ diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index f31c5c5f1b7e..3e57fbdf50a3 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -83,19 +83,6 @@ static struct workqueue_struct *kacpi_notify_wq; struct workqueue_struct *kacpi_hotplug_wq; EXPORT_SYMBOL(kacpi_hotplug_wq); -struct acpi_res_list { - resource_size_t start; - resource_size_t end; - acpi_adr_space_type resource_type; /* IO port, System memory, ...*/ - char name[5]; /* only can have a length of 4 chars, make use of this - one instead of res->name, no need to kalloc then */ - struct list_head resource_list; - int count; -}; - -static LIST_HEAD(resource_list_head); -static DEFINE_SPINLOCK(acpi_res_lock); - /* * This list of permanent mappings is for memory that may be accessed from * interrupt context, where we can't do the ioremap(). @@ -1278,44 +1265,28 @@ __setup("acpi_enforce_resources=", acpi_enforce_resources_setup); * drivers */ int acpi_check_resource_conflict(const struct resource *res) { - struct acpi_res_list *res_list_elem; - int ioport = 0, clash = 0; + acpi_adr_space_type space_id; + acpi_size length; + u8 warn = 0; + int clash = 0; if (acpi_enforce_resources == ENFORCE_RESOURCES_NO) return 0; if (!(res->flags & IORESOURCE_IO) && !(res->flags & IORESOURCE_MEM)) return 0; - ioport = res->flags & IORESOURCE_IO; - - spin_lock(&acpi_res_lock); - list_for_each_entry(res_list_elem, &resource_list_head, - resource_list) { - if (ioport && (res_list_elem->resource_type - != ACPI_ADR_SPACE_SYSTEM_IO)) - continue; - if (!ioport && (res_list_elem->resource_type - != ACPI_ADR_SPACE_SYSTEM_MEMORY)) - continue; + if (res->flags & IORESOURCE_IO) + space_id = ACPI_ADR_SPACE_SYSTEM_IO; + else + space_id = ACPI_ADR_SPACE_SYSTEM_MEMORY; - if (res->end < res_list_elem->start - || res_list_elem->end < res->start) - continue; - clash = 1; - break; - } - spin_unlock(&acpi_res_lock); + length = res->end - res->start + 1; + if (acpi_enforce_resources != ENFORCE_RESOURCES_NO) + warn = 1; + clash = acpi_check_address_range(space_id, res->start, length, warn); if (clash) { if (acpi_enforce_resources != ENFORCE_RESOURCES_NO) { - printk(KERN_WARNING "ACPI: resource %s %pR" - " conflicts with ACPI region %s " - "[%s 0x%zx-0x%zx]\n", - res->name, res, res_list_elem->name, - (res_list_elem->resource_type == - ACPI_ADR_SPACE_SYSTEM_IO) ? "io" : "mem", - (size_t) res_list_elem->start, - (size_t) res_list_elem->end); if (acpi_enforce_resources == ENFORCE_RESOURCES_LAX) printk(KERN_NOTICE "ACPI: This conflict may" " cause random problems and system" @@ -1467,155 +1438,6 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object) kmem_cache_free(cache, object); return (AE_OK); } - -static inline int acpi_res_list_add(struct acpi_res_list *res) -{ - struct acpi_res_list *res_list_elem; - - list_for_each_entry(res_list_elem, &resource_list_head, - resource_list) { - - if (res->resource_type == res_list_elem->resource_type && - res->start == res_list_elem->start && - res->end == res_list_elem->end) { - - /* - * The Region(addr,len) already exist in the list, - * just increase the count - */ - - res_list_elem->count++; - return 0; - } - } - - res->count = 1; - list_add(&res->resource_list, &resource_list_head); - return 1; -} - -static inline void acpi_res_list_del(struct acpi_res_list *res) -{ - struct acpi_res_list *res_list_elem; - - list_for_each_entry(res_list_elem, &resource_list_head, - resource_list) { - - if (res->resource_type == res_list_elem->resource_type && - res->start == res_list_elem->start && - res->end == res_list_elem->end) { - - /* - * If the res count is decreased to 0, - * remove and free it - */ - - if (--res_list_elem->count == 0) { - list_del(&res_list_elem->resource_list); - kfree(res_list_elem); - } - return; - } - } -} - -acpi_status -acpi_os_invalidate_address( - u8 space_id, - acpi_physical_address address, - acpi_size length) -{ - struct acpi_res_list res; - - switch (space_id) { - case ACPI_ADR_SPACE_SYSTEM_IO: - case ACPI_ADR_SPACE_SYSTEM_MEMORY: - /* Only interference checks against SystemIO and SystemMemory - are needed */ - res.start = address; - res.end = address + length - 1; - res.resource_type = space_id; - spin_lock(&acpi_res_lock); - acpi_res_list_del(&res); - spin_unlock(&acpi_res_lock); - break; - case ACPI_ADR_SPACE_PCI_CONFIG: - case ACPI_ADR_SPACE_EC: - case ACPI_ADR_SPACE_SMBUS: - case ACPI_ADR_SPACE_CMOS: - case ACPI_ADR_SPACE_PCI_BAR_TARGET: - case ACPI_ADR_SPACE_DATA_TABLE: - case ACPI_ADR_SPACE_FIXED_HARDWARE: - break; - } - return AE_OK; -} - -/****************************************************************************** - * - * FUNCTION: acpi_os_validate_address - * - * PARAMETERS: space_id - ACPI space ID - * address - Physical address - * length - Address length - * - * RETURN: AE_OK if address/length is valid for the space_id. Otherwise, - * should return AE_AML_ILLEGAL_ADDRESS. - * - * DESCRIPTION: Validate a system address via the host OS. Used to validate - * the addresses accessed by AML operation regions. - * - *****************************************************************************/ - -acpi_status -acpi_os_validate_address ( - u8 space_id, - acpi_physical_address address, - acpi_size length, - char *name) -{ - struct acpi_res_list *res; - int added; - if (acpi_enforce_resources == ENFORCE_RESOURCES_NO) - return AE_OK; - - switch (space_id) { - case ACPI_ADR_SPACE_SYSTEM_IO: - case ACPI_ADR_SPACE_SYSTEM_MEMORY: - /* Only interference checks against SystemIO and SystemMemory - are needed */ - res = kzalloc(sizeof(struct acpi_res_list), GFP_KERNEL); - if (!res) - return AE_OK; - /* ACPI names are fixed to 4 bytes, still better use strlcpy */ - strlcpy(res->name, name, 5); - res->start = address; - res->end = address + length - 1; - res->resource_type = space_id; - spin_lock(&acpi_res_lock); - added = acpi_res_list_add(res); - spin_unlock(&acpi_res_lock); - pr_debug("%s %s resource: start: 0x%llx, end: 0x%llx, " - "name: %s\n", added ? "Added" : "Already exist", - (space_id == ACPI_ADR_SPACE_SYSTEM_IO) - ? "SystemIO" : "System Memory", - (unsigned long long)res->start, - (unsigned long long)res->end, - res->name); - if (!added) - kfree(res); - break; - case ACPI_ADR_SPACE_PCI_CONFIG: - case ACPI_ADR_SPACE_EC: - case ACPI_ADR_SPACE_SMBUS: - case ACPI_ADR_SPACE_CMOS: - case ACPI_ADR_SPACE_PCI_BAR_TARGET: - case ACPI_ADR_SPACE_DATA_TABLE: - case ACPI_ADR_SPACE_FIXED_HARDWARE: - break; - } - return AE_OK; -} #endif acpi_status __init acpi_os_initialize(void) diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index 83062ed0ef2f..2fe8639b3ae7 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -238,13 +238,6 @@ acpi_os_write_pci_configuration(struct acpi_pci_id *pci_id, /* * Miscellaneous */ -acpi_status -acpi_os_validate_address(u8 space_id, acpi_physical_address address, - acpi_size length, char *name); -acpi_status -acpi_os_invalidate_address(u8 space_id, acpi_physical_address address, - acpi_size length); - u64 acpi_os_get_timer(void); acpi_status acpi_os_signal(u32 function, void *info); diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index 30f5bef4f14d..a4cfded67c08 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -112,6 +112,11 @@ acpi_status acpi_install_interface(acpi_string interface_name); acpi_status acpi_remove_interface(acpi_string interface_name); +u32 +acpi_check_address_range(acpi_adr_space_type space_id, + acpi_physical_address address, + acpi_size length, u8 warn); + /* * ACPI Memory management */ -- cgit v1.2.3 From 5d1f86572685d577b76142b7c61453000e1a5e26 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 12 Jan 2012 13:29:41 +0800 Subject: ACPICA: Update to version 20120111 Version 20120111. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- include/acpi/acpixf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/acpi') diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index a4cfded67c08..dceeaf51d706 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -47,7 +47,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20111123 +#define ACPI_CA_VERSION 0x20120111 #include "actypes.h" #include "actbl.h" -- cgit v1.2.3 From 8df0eb7c9d96f9e82f233ee8b74e0f0c8471f868 Mon Sep 17 00:00:00 2001 From: Kurt Garloff Date: Tue, 17 Jan 2012 04:18:02 -0500 Subject: ACPI: Store SRAT table revision In SRAT v1, we had 8bit proximity domain (PXM) fields; SRAT v2 provides 32bits for these. The new fields were reserved before. According to the ACPI spec, the OS must disregrard reserved fields. In order to know whether or not, we must know what version the SRAT table has. This patch stores the SRAT table revision for later consumption by arch specific __init functions. Signed-off-by: Kurt Garloff Signed-off-by: Len Brown --- drivers/acpi/numa.c | 6 ++++++ include/acpi/acpi_numa.h | 1 + 2 files changed, 7 insertions(+) (limited to 'include/acpi') diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index 3b5c3189fd99..e56f3be7b07d 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -45,6 +45,8 @@ static int pxm_to_node_map[MAX_PXM_DOMAINS] static int node_to_pxm_map[MAX_NUMNODES] = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; +unsigned char acpi_srat_revision __initdata; + int pxm_to_node(int pxm) { if (pxm < 0) @@ -255,9 +257,13 @@ acpi_parse_memory_affinity(struct acpi_subtable_header * header, static int __init acpi_parse_srat(struct acpi_table_header *table) { + struct acpi_table_srat *srat; if (!table) return -EINVAL; + srat = (struct acpi_table_srat *)table; + acpi_srat_revision = srat->header.revision; + /* Real work done in acpi_table_parse_srat below. */ return 0; diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h index 173972672175..451823cb8837 100644 --- a/include/acpi/acpi_numa.h +++ b/include/acpi/acpi_numa.h @@ -15,6 +15,7 @@ extern int pxm_to_node(int); extern int node_to_pxm(int); extern void __acpi_map_pxm_to_node(int, int); extern int acpi_map_pxm_to_node(int); +extern unsigned char acpi_srat_revision; #endif /* CONFIG_ACPI_NUMA */ #endif /* __ACP_NUMA_H */ -- cgit v1.2.3 From c130bd6f82e5dda28b1a19741c4c2fe269713199 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Tue, 17 Jan 2012 12:10:16 -0800 Subject: acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec ACPI 5.0 provides extensions to the EINJ mechanism to specify the target for the error injection - by APICID for cpu related errors, by address for memory related errors, and by segment/bus/device/function for PCIe related errors. Also extensions for vendor specific error injections. Tested-by: Chen Gong Signed-off-by: Tony Luck Signed-off-by: Len Brown --- Documentation/acpi/apei/einj.txt | 55 ++++++++-- drivers/acpi/apei/einj.c | 224 ++++++++++++++++++++++++++++++++------- include/acpi/actbl1.h | 3 +- 3 files changed, 234 insertions(+), 48 deletions(-) (limited to 'include/acpi') diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt index 5cc699ba5453..e7cc36397217 100644 --- a/Documentation/acpi/apei/einj.txt +++ b/Documentation/acpi/apei/einj.txt @@ -47,20 +47,53 @@ directory apei/einj. The following files are provided. - param1 This file is used to set the first error parameter value. Effect of - parameter depends on error_type specified. For memory error, this is - physical memory address. Only available if param_extension module - parameter is specified. + parameter depends on error_type specified. - param2 This file is used to set the second error parameter value. Effect of - parameter depends on error_type specified. For memory error, this is - physical memory address mask. Only available if param_extension - module parameter is specified. + parameter depends on error_type specified. + +BIOS versions based in the ACPI 4.0 specification have limited options +to control where the errors are injected. Your BIOS may support an +extension (enabled with the param_extension=1 module parameter, or +boot command line einj.param_extension=1). This allows the address +and mask for memory injections to be specified by the param1 and +param2 files in apei/einj. + +BIOS versions using the ACPI 5.0 specification have more control over +the target of the injection. For processor related errors (type 0x1, +0x2 and 0x4) the APICID of the target should be provided using the +param1 file in apei/einj. For memory errors (type 0x8, 0x10 and 0x20) +the address is set using param1 with a mask in param2 (0x0 is equivalent +to all ones). For PCI express errors (type 0x40, 0x80 and 0x100) the +segment, bus, device and function are specified using param1: + + 31 24 23 16 15 11 10 8 7 0 + +-------------------------------------------------+ + | segment | bus | device | function | reserved | + +-------------------------------------------------+ + +An ACPI 5.0 BIOS may also allow vendor specific errors to be injected. +In this case a file named vendor will contain identifying information +from the BIOS that hopefully will allow an application wishing to use +the vendor specific extension to tell that they are running on a BIOS +that supports it. All vendor extensions have the 0x80000000 bit set in +error_type. A file vendor_flags controls the interpretation of param1 +and param2 (1 = PROCESSOR, 2 = MEMORY, 4 = PCI). See your BIOS vendor +documentation for details (and expect changes to this API if vendors +creativity in using this feature expands beyond our expectations). + +Example: +# cd /sys/kernel/debug/apei/einj +# cat available_error_type # See which errors can be injected +0x00000002 Processor Uncorrectable non-fatal +0x00000008 Memory Correctable +0x00000010 Memory Uncorrectable non-fatal +# echo 0x12345000 > param1 # Set memory address for injection +# echo 0xfffffffffffff000 > param2 # Mask - anywhere in this page +# echo 0x8 > error_type # Choose correctable memory error +# echo 1 > error_inject # Inject now -Injecting parameter support is a BIOS version specific extension, that -is, it only works on some BIOS version. If you want to use it, please -make sure your BIOS version has the proper support and specify -"param_extension=y" in module parameter. For more information about EINJ, please refer to ACPI specification -version 4.0, section 17.5. +version 4.0, section 17.5 and ACPI 5.0, section 18.6. diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c index 589b96c38704..31546fd21029 100644 --- a/drivers/acpi/apei/einj.c +++ b/drivers/acpi/apei/einj.c @@ -42,6 +42,42 @@ /* Firmware should respond within 1 milliseconds */ #define FIRMWARE_TIMEOUT (1 * NSEC_PER_MSEC) +/* + * ACPI version 5 provides a SET_ERROR_TYPE_WITH_ADDRESS action. + */ +static int acpi5; + +struct set_error_type_with_address { + u32 type; + u32 vendor_extension; + u32 flags; + u32 apicid; + u64 memory_address; + u64 memory_address_range; + u32 pcie_sbdf; +}; +enum { + SETWA_FLAGS_APICID = 1, + SETWA_FLAGS_MEM = 2, + SETWA_FLAGS_PCIE_SBDF = 4, +}; + +/* + * Vendor extensions for platform specific operations + */ +struct vendor_error_type_extension { + u32 length; + u32 pcie_sbdf; + u16 vendor_id; + u16 device_id; + u8 rev_id; + u8 reserved[3]; +}; + +static u32 vendor_flags; +static struct debugfs_blob_wrapper vendor_blob; +static char vendor_dev[64]; + /* * Some BIOSes allow parameters to the SET_ERROR_TYPE entries in the * EINJ table through an unpublished extension. Use with caution as @@ -103,7 +139,14 @@ static struct apei_exec_ins_type einj_ins_type[] = { */ static DEFINE_MUTEX(einj_mutex); -static struct einj_parameter *einj_param; +static void *einj_param; + +#ifndef readq +static inline __u64 readq(volatile void __iomem *addr) +{ + return ((__u64)readl(addr+4) << 32) + readl(addr); +} +#endif #ifndef writeq static inline void writeq(__u64 val, volatile void __iomem *addr) @@ -158,10 +201,31 @@ static int einj_timedout(u64 *t) return 0; } -static u64 einj_get_parameter_address(void) +static void check_vendor_extension(u64 paddr, + struct set_error_type_with_address *v5param) +{ + int offset = readl(&v5param->vendor_extension); + struct vendor_error_type_extension *v; + u32 sbdf; + + if (!offset) + return; + v = ioremap(paddr + offset, sizeof(*v)); + if (!v) + return; + sbdf = readl(&v->pcie_sbdf); + sprintf(vendor_dev, "%x:%x:%x.%x vendor_id=%x device_id=%x rev_id=%x\n", + sbdf >> 24, (sbdf >> 16) & 0xff, + (sbdf >> 11) & 0x1f, (sbdf >> 8) & 0x7, + readw(&v->vendor_id), readw(&v->device_id), + readb(&v->rev_id)); + iounmap(v); +} + +static void *einj_get_parameter_address(void) { int i; - u64 paddr = 0; + u64 paddrv4 = 0, paddrv5 = 0; struct acpi_whea_header *entry; entry = EINJ_TAB_ENTRY(einj_tab); @@ -170,12 +234,40 @@ static u64 einj_get_parameter_address(void) entry->instruction == ACPI_EINJ_WRITE_REGISTER && entry->register_region.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) - memcpy(&paddr, &entry->register_region.address, - sizeof(paddr)); + memcpy(&paddrv4, &entry->register_region.address, + sizeof(paddrv4)); + if (entry->action == ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS && + entry->instruction == ACPI_EINJ_WRITE_REGISTER && + entry->register_region.space_id == + ACPI_ADR_SPACE_SYSTEM_MEMORY) + memcpy(&paddrv5, &entry->register_region.address, + sizeof(paddrv5)); entry++; } + if (paddrv5) { + struct set_error_type_with_address *v5param; + + v5param = ioremap(paddrv5, sizeof(*v5param)); + if (v5param) { + acpi5 = 1; + check_vendor_extension(paddrv5, v5param); + return v5param; + } + } + if (paddrv4) { + struct einj_parameter *v4param; + + v4param = ioremap(paddrv4, sizeof(*v4param)); + if (!v4param) + return 0; + if (readq(&v4param->reserved1) || readq(&v4param->reserved2)) { + iounmap(v4param); + return 0; + } + return v4param; + } - return paddr; + return 0; } /* do sanity check to trigger table */ @@ -293,12 +385,56 @@ static int __einj_error_inject(u32 type, u64 param1, u64 param2) if (rc) return rc; apei_exec_ctx_set_input(&ctx, type); - rc = apei_exec_run(&ctx, ACPI_EINJ_SET_ERROR_TYPE); - if (rc) - return rc; - if (einj_param) { - writeq(param1, &einj_param->param1); - writeq(param2, &einj_param->param2); + if (acpi5) { + struct set_error_type_with_address *v5param = einj_param; + + writel(type, &v5param->type); + if (type & 0x80000000) { + switch (vendor_flags) { + case SETWA_FLAGS_APICID: + writel(param1, &v5param->apicid); + break; + case SETWA_FLAGS_MEM: + writeq(param1, &v5param->memory_address); + writeq(param2, &v5param->memory_address_range); + break; + case SETWA_FLAGS_PCIE_SBDF: + writel(param1, &v5param->pcie_sbdf); + break; + } + writel(vendor_flags, &v5param->flags); + } else { + switch (type) { + case ACPI_EINJ_PROCESSOR_CORRECTABLE: + case ACPI_EINJ_PROCESSOR_UNCORRECTABLE: + case ACPI_EINJ_PROCESSOR_FATAL: + writel(param1, &v5param->apicid); + writel(SETWA_FLAGS_APICID, &v5param->flags); + break; + case ACPI_EINJ_MEMORY_CORRECTABLE: + case ACPI_EINJ_MEMORY_UNCORRECTABLE: + case ACPI_EINJ_MEMORY_FATAL: + writeq(param1, &v5param->memory_address); + writeq(param2, &v5param->memory_address_range); + writel(SETWA_FLAGS_MEM, &v5param->flags); + break; + case ACPI_EINJ_PCIX_CORRECTABLE: + case ACPI_EINJ_PCIX_UNCORRECTABLE: + case ACPI_EINJ_PCIX_FATAL: + writel(param1, &v5param->pcie_sbdf); + writel(SETWA_FLAGS_PCIE_SBDF, &v5param->flags); + break; + } + } + } else { + rc = apei_exec_run(&ctx, ACPI_EINJ_SET_ERROR_TYPE); + if (rc) + return rc; + if (einj_param) { + struct einj_parameter *v4param = einj_param; + writeq(param1, &v4param->param1); + writeq(param2, &v4param->param2); + } } rc = apei_exec_run(&ctx, ACPI_EINJ_EXECUTE_OPERATION); if (rc) @@ -408,15 +544,25 @@ static int error_type_set(void *data, u64 val) { int rc; u32 available_error_type = 0; + u32 tval, vendor; + + /* + * Vendor defined types have 0x80000000 bit set, and + * are not enumerated by ACPI_EINJ_GET_ERROR_TYPE + */ + vendor = val & 0x80000000; + tval = val & 0x7fffffff; /* Only one error type can be specified */ - if (val & (val - 1)) - return -EINVAL; - rc = einj_get_available_error_type(&available_error_type); - if (rc) - return rc; - if (!(val & available_error_type)) + if (tval & (tval - 1)) return -EINVAL; + if (!vendor) { + rc = einj_get_available_error_type(&available_error_type); + if (rc) + return rc; + if (!(val & available_error_type)) + return -EINVAL; + } error_type = val; return 0; @@ -455,7 +601,6 @@ static int einj_check_table(struct acpi_table_einj *einj_tab) static int __init einj_init(void) { int rc; - u64 param_paddr; acpi_status status; struct dentry *fentry; struct apei_exec_context ctx; @@ -509,23 +654,30 @@ static int __init einj_init(void) rc = apei_exec_pre_map_gars(&ctx); if (rc) goto err_release; - if (param_extension) { - param_paddr = einj_get_parameter_address(); - if (param_paddr) { - einj_param = ioremap(param_paddr, sizeof(*einj_param)); - rc = -ENOMEM; - if (!einj_param) - goto err_unmap; - fentry = debugfs_create_x64("param1", S_IRUSR | S_IWUSR, - einj_debug_dir, &error_param1); - if (!fentry) - goto err_unmap; - fentry = debugfs_create_x64("param2", S_IRUSR | S_IWUSR, - einj_debug_dir, &error_param2); - if (!fentry) - goto err_unmap; - } else - pr_warn(EINJ_PFX "Parameter extension is not supported.\n"); + + einj_param = einj_get_parameter_address(); + if ((param_extension || acpi5) && einj_param) { + fentry = debugfs_create_x64("param1", S_IRUSR | S_IWUSR, + einj_debug_dir, &error_param1); + if (!fentry) + goto err_unmap; + fentry = debugfs_create_x64("param2", S_IRUSR | S_IWUSR, + einj_debug_dir, &error_param2); + if (!fentry) + goto err_unmap; + } + + if (vendor_dev[0]) { + vendor_blob.data = vendor_dev; + vendor_blob.size = strlen(vendor_dev); + fentry = debugfs_create_blob("vendor", S_IRUSR, + einj_debug_dir, &vendor_blob); + if (!fentry) + goto err_unmap; + fentry = debugfs_create_x32("vendor_flags", S_IRUSR | S_IWUSR, + einj_debug_dir, &vendor_flags); + if (!fentry) + goto err_unmap; } pr_info(EINJ_PFX "Error INJection is initialized.\n"); diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index 7504bc99b29b..f25d7efee630 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -228,7 +228,8 @@ enum acpi_einj_actions { ACPI_EINJ_EXECUTE_OPERATION = 5, ACPI_EINJ_CHECK_BUSY_STATUS = 6, ACPI_EINJ_GET_COMMAND_STATUS = 7, - ACPI_EINJ_ACTION_RESERVED = 8, /* 8 and greater are reserved */ + ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS = 8, + ACPI_EINJ_ACTION_RESERVED = 9, /* 9 and greater are reserved */ ACPI_EINJ_TRIGGER_ERROR = 0xFF /* Except for this value */ }; -- cgit v1.2.3