From 8d88bbffcbac2e7ceba04a9cdff97241b6b5f1db Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Mon, 23 Dec 2013 19:06:31 +0200 Subject: usbnet: mcs7830: rework link state detection Even with the quirks in commit dabdaf0c (mcs7830: Fix link state detection) there are still spurious link-down events for some chips where the false link-down events count go over a few hundreds. This patch takes a more conservative approach and only looks at link-down events where the link-down state is not combined with other states (e.g. half/full speed, pending frames in SRAM or TX status information valid). In all other cases we assume the link is up. Tested on MCS7830CV-DA (USB ID 9710:7830). Cc: Ondrej Zary Cc: Michael Leun Cc: Ming Lei Signed-off-by: Octavian Purdila Signed-off-by: David S. Miller --- drivers/net/usb/mcs7830.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c index 03832d3780aa..f54637828574 100644 --- a/drivers/net/usb/mcs7830.c +++ b/drivers/net/usb/mcs7830.c @@ -117,7 +117,6 @@ enum { struct mcs7830_data { u8 multi_filter[8]; u8 config; - u8 link_counter; }; static const char driver_name[] = "MOSCHIP usb-ethernet driver"; @@ -561,26 +560,16 @@ static void mcs7830_status(struct usbnet *dev, struct urb *urb) { u8 *buf = urb->transfer_buffer; bool link, link_changed; - struct mcs7830_data *data = mcs7830_get_data(dev); if (urb->actual_length < 16) return; - link = !(buf[1] & 0x20); + link = !(buf[1] == 0x20); link_changed = netif_carrier_ok(dev->net) != link; if (link_changed) { - data->link_counter++; - /* - track link state 20 times to guard against erroneous - link state changes reported sometimes by the chip - */ - if (data->link_counter > 20) { - data->link_counter = 0; - usbnet_link_change(dev, link, 0); - netdev_dbg(dev->net, "Link Status is: %d\n", link); - } - } else - data->link_counter = 0; + usbnet_link_change(dev, link, 0); + netdev_dbg(dev->net, "Link Status is: %d\n", link); + } } static const struct driver_info moschip_info = { -- cgit v1.2.3 From b899e698fca1de16921525e347f6e81539fdedcf Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 1 Jan 2014 11:06:41 +0200 Subject: bnx2x: Fix 578xx-KR 1G link Fix a problem where 578xx-KR is unable to get link when connected to 1G link partner. Two fixes were required: One was to force CL37 sync_status low to prevent Warpcore from getting stuck in CL73 parallel detect loop while link partner is sending. Second fix was to enable auto-detect mode, thus allowing the Warpcore to select the higher speed protocol between 10G-KR (over CL73), or go down to 1G over CL73 when there's indication for it. Signed-off-by: Yaniv Rosner Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 13 +++++++++++++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 1 + 2 files changed, 14 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 20dcc02431ca..efbf729568a5 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3865,6 +3865,19 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, bnx2x_warpcore_enable_AN_KR2(phy, params, vars); } else { + /* Enable Auto-Detect to support 1G over CL37 as well */ + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_SERDESDIGITAL_CONTROL1000X1, 0x10); + + /* Force cl48 sync_status LOW to avoid getting stuck in CL73 + * parallel-detect loop when CL73 and CL37 are enabled. + */ + CL22_WR_OVER_CL45(bp, phy, MDIO_REG_BANK_AER_BLOCK, + MDIO_AER_BLOCK_AER_REG, 0); + bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI, 0x0800); + bnx2x_set_aer_mmd(params, phy); + bnx2x_disable_kr2(params, vars, phy); } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 3efbb35267c8..14ffb6e56e59 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -7179,6 +7179,7 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_WC_REG_RX1_PCI_CTRL 0x80ca #define MDIO_WC_REG_RX2_PCI_CTRL 0x80da #define MDIO_WC_REG_RX3_PCI_CTRL 0x80ea +#define MDIO_WC_REG_RXB_ANA_RX_CONTROL_PCI 0x80fa #define MDIO_WC_REG_XGXSBLK2_UNICORE_MODE_10G 0x8104 #define MDIO_WC_REG_XGXS_STATUS3 0x8129 #define MDIO_WC_REG_PAR_DET_10G_STATUS 0x8130 -- cgit v1.2.3 From e803d33a32213f2c28456faaa62b2a88f91de2ea Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 1 Jan 2014 11:06:42 +0200 Subject: bnx2x: Fix passive DAC cable detection Fix Passive DAC detection for specific cables, such that even in case SFP_CABLE_TECHNOLOGY option is not set in the EEPROM (offset 8), treat it as a passive DAC cable, since some cables don't have this indication. Signed-off-by: Yaniv Rosner Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index efbf729568a5..000b6eec38a0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -8133,17 +8133,20 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, *edc_mode = EDC_MODE_ACTIVE_DAC; else check_limiting_mode = 1; - } else if (copper_module_type & - SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) { + } else { + *edc_mode = EDC_MODE_PASSIVE_DAC; + /* Even in case PASSIVE_DAC indication is not set, + * treat it as a passive DAC cable, since some cables + * don't have this indication. + */ + if (copper_module_type & + SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) { DP(NETIF_MSG_LINK, "Passive Copper cable detected\n"); - *edc_mode = - EDC_MODE_PASSIVE_DAC; - } else { - DP(NETIF_MSG_LINK, - "Unknown copper-cable-type 0x%x !!!\n", - copper_module_type); - return -EINVAL; + } else { + DP(NETIF_MSG_LINK, + "Unknown copper-cable-type\n"); + } } break; } -- cgit v1.2.3 From a429ec239cbc42dd3b2bc9933745103ca71d2b9d Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 1 Jan 2014 11:06:43 +0200 Subject: bnx2x: Fix Duplex setting for 54618se BCM54618SE is used to advertise half-duplex even if HD was not requested by the user. This change makes the legacy speed/duplex advertisement for this PHY exactly according to the requested speed and duplex. Signed-off-by: Yaniv Rosner Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 54 ++++++++++++------------ 1 file changed, 28 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 000b6eec38a0..68417e1fb6df 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -10841,9 +10841,9 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy, (1<<11)); if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || - (phy->req_line_speed == SPEED_1000)) { + (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)) || + (phy->req_line_speed == SPEED_1000)) { an_1000_val |= (1<<8); autoneg_val |= (1<<9 | 1<<12); if (phy->req_duplex == DUPLEX_FULL) @@ -10859,30 +10859,32 @@ static int bnx2x_54618se_config_init(struct bnx2x_phy *phy, 0x09, &an_1000_val); - /* Set 100 speed advertisement */ - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)))) { - an_10_100_val |= (1<<7); - /* Enable autoneg and restart autoneg for legacy speeds */ - autoneg_val |= (1<<9 | 1<<12); - - if (phy->req_duplex == DUPLEX_FULL) - an_10_100_val |= (1<<8); - DP(NETIF_MSG_LINK, "Advertising 100M\n"); - } - - /* Set 10 speed advertisement */ - if (((phy->req_line_speed == SPEED_AUTO_NEG) && - (phy->speed_cap_mask & - (PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF)))) { - an_10_100_val |= (1<<5); - autoneg_val |= (1<<9 | 1<<12); - if (phy->req_duplex == DUPLEX_FULL) + /* Advertise 10/100 link speed */ + if (phy->req_line_speed == SPEED_AUTO_NEG) { + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) { + an_10_100_val |= (1<<5); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 10M-HD\n"); + } + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) { an_10_100_val |= (1<<6); - DP(NETIF_MSG_LINK, "Advertising 10M\n"); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 10M-FD\n"); + } + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) { + an_10_100_val |= (1<<7); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 100M-HD\n"); + } + if (phy->speed_cap_mask & + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) { + an_10_100_val |= (1<<8); + autoneg_val |= (1<<9 | 1<<12); + DP(NETIF_MSG_LINK, "Advertising 100M-FD\n"); + } } /* Only 10/100 are allowed to work in FORCE mode */ -- cgit v1.2.3 From ad1d9ef3f736485ba0f49325fa4c73cd1d963853 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 1 Jan 2014 11:06:44 +0200 Subject: bnx2x: Fix incorrect link-up report Fix a problem where link is reported to be up when SFP+ module is plugged in without cable. This occurs with specific module types which may generate temporary TX_FAULT indication. Solution is to avoid changing any link parameters when checking TX_FAULT indication while physical link is down. Signed-off-by: Yaniv Rosner Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 68417e1fb6df..998cce36340c 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -13360,6 +13360,10 @@ static u8 bnx2x_analyze_link_error(struct link_params *params, DP(NETIF_MSG_LINK, "Link changed:[%x %x]->%x\n", vars->link_up, old_status, status); + /* Do not touch the link in case physical link down */ + if ((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0) + return 1; + /* a. Update shmem->link_status accordingly * b. Update link_vars->link_up */ -- cgit v1.2.3 From f17e9fa5686ac21bce756638ef71160395880928 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Wed, 1 Jan 2014 11:06:45 +0200 Subject: bnx2x: Fix KR2 work-around detection of BCM8073 KR2 work-around is based on detecting non-KR2 devices which may not link up in this mode. One such link-partner is the BCM8073 which has specific advertisement characteristics in specific mode, and this condition was not set correctly. Signed-off-by: Yaniv Rosner Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 998cce36340c..11fc79585491 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -13572,7 +13572,7 @@ static void bnx2x_check_kr2_wa(struct link_params *params, */ not_kr2_device = (((base_page & 0x8000) == 0) || (((base_page & 0x8000) && - ((next_page & 0xe0) == 0x2)))); + ((next_page & 0xe0) == 0x20)))); /* In case KR2 is already disabled, check if we need to re-enable it */ if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { -- cgit v1.2.3 From d9c602f033b00ba360a324c0ee5aa59a6838fb40 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Thu, 2 Jan 2014 13:38:43 -0500 Subject: qlcnic: Fix loopback diagnostic test o Adapter requires that if the port is in loopback mode no traffic should be flowing through that port, so on arrival of Link up AEN, do not advertise Link up to the stack until port is out of loopback mode Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 2 ++ drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c | 7 +------ drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 4 ++++ 3 files changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 631ea0ac1cd8..4dfef81e3c45 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -487,6 +487,7 @@ struct qlcnic_hardware_context { struct qlcnic_mailbox *mailbox; u8 extend_lb_time; u8 phys_port_id[ETH_ALEN]; + u8 lb_mode; }; struct qlcnic_adapter_stats { @@ -808,6 +809,7 @@ struct qlcnic_mac_list_s { #define QLCNIC_ILB_MODE 0x1 #define QLCNIC_ELB_MODE 0x2 +#define QLCNIC_LB_MODE_MASK 0x3 #define QLCNIC_LINKEVENT 0x1 #define QLCNIC_LB_RESPONSE 0x2 diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c index 6055d397a29e..f776f99f7915 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c @@ -1684,12 +1684,6 @@ int qlcnic_83xx_loopback_test(struct net_device *netdev, u8 mode) } } while ((adapter->ahw->linkup && ahw->has_link_events) != 1); - /* Make sure carrier is off and queue is stopped during loopback */ - if (netif_running(netdev)) { - netif_carrier_off(netdev); - netif_tx_stop_all_queues(netdev); - } - ret = qlcnic_do_lb_test(adapter, mode); qlcnic_83xx_clear_lb_mode(adapter, mode); @@ -2121,6 +2115,7 @@ static void qlcnic_83xx_handle_link_aen(struct qlcnic_adapter *adapter, ahw->link_autoneg = MSB(MSW(data[3])); ahw->module_type = MSB(LSW(data[3])); ahw->has_link_events = 1; + ahw->lb_mode = data[4] & QLCNIC_LB_MODE_MASK; qlcnic_advert_link_change(adapter, link_status); } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index eda6c691d897..136297631999 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -689,6 +689,10 @@ void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup) adapter->ahw->linkup = 0; netif_carrier_off(netdev); } else if (!adapter->ahw->linkup && linkup) { + /* Do not advertise Link up if the port is in loopback mode */ + if (qlcnic_83xx_check(adapter) && adapter->ahw->lb_mode) + return; + netdev_info(netdev, "NIC Link is up\n"); adapter->ahw->linkup = 1; netif_carrier_on(netdev); -- cgit v1.2.3 From f3e3ccf83bab261c5b55623bd3e9d1147b1c2e19 Mon Sep 17 00:00:00 2001 From: Manish Chopra Date: Thu, 2 Jan 2014 13:38:44 -0500 Subject: qlcnic: Fix resource allocation for TX queues o TX queues allocation was getting distributed equally among all the functions of the port including VFs and PF. Which was leading to failure in PF's multiple TX queues creation. o Instead of dividing queues equally allocate one TX queue for each VF as VF doesn't support multiple TX queues. Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c index 686f460b1502..024f8161d2fe 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c @@ -75,7 +75,6 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter, num_vfs = sriov->num_vfs; max = num_vfs + 1; info->bit_offsets = 0xffff; - info->max_tx_ques = res->num_tx_queues / max; info->max_rx_mcast_mac_filters = res->num_rx_mcast_mac_filters; num_vf_macs = QLCNIC_SRIOV_VF_MAX_MAC; @@ -86,6 +85,7 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter, info->max_tx_mac_filters = temp; info->min_tx_bw = 0; info->max_tx_bw = MAX_BW; + info->max_tx_ques = res->num_tx_queues - sriov->num_vfs; } else { id = qlcnic_sriov_func_to_index(adapter, func); if (id < 0) @@ -95,6 +95,7 @@ static int qlcnic_sriov_pf_cal_res_limit(struct qlcnic_adapter *adapter, info->max_tx_bw = vp->max_tx_bw; info->max_rx_ucast_mac_filters = num_vf_macs; info->max_tx_mac_filters = num_vf_macs; + info->max_tx_ques = QLCNIC_SINGLE_RING; } info->max_rx_ip_addr = res->num_destip / max; -- cgit v1.2.3 From 6cd4ce0099da7702f885b6fa9ebb49e3831d90b4 Mon Sep 17 00:00:00 2001 From: Jason Wang Date: Mon, 30 Dec 2013 11:34:40 +0800 Subject: virtio-net: fix refill races during restore During restoring, try_fill_recv() was called with neither napi lock nor napi disabled. This can lead two try_fill_recv() was called in the same time. Fix this by refilling before trying to enable napi. Fixes 0741bcb5584f9e2390ae6261573c4de8314999f2 (virtio: net: Add freeze, restore handlers to support S4). Cc: Amit Shah Cc: Rusty Russell Cc: Michael S. Tsirkin Cc: Eric Dumazet Signed-off-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index d208f8604981..5d776447d9c3 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1797,16 +1797,17 @@ static int virtnet_restore(struct virtio_device *vdev) if (err) return err; - if (netif_running(vi->dev)) + if (netif_running(vi->dev)) { + for (i = 0; i < vi->curr_queue_pairs; i++) + if (!try_fill_recv(&vi->rq[i], GFP_KERNEL)) + schedule_delayed_work(&vi->refill, 0); + for (i = 0; i < vi->max_queue_pairs; i++) virtnet_napi_enable(&vi->rq[i]); + } netif_device_attach(vi->dev); - for (i = 0; i < vi->curr_queue_pairs; i++) - if (!try_fill_recv(&vi->rq[i], GFP_KERNEL)) - schedule_delayed_work(&vi->refill, 0); - mutex_lock(&vi->config_lock); vi->config_enable = true; mutex_unlock(&vi->config_lock); -- cgit v1.2.3 From 940d9d34a5467c2e2574866eb009d4cb61e27299 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 23 Dec 2013 15:34:29 -0200 Subject: cxgb4: allow large buffer size to have page size Since commit 52367a763d8046190754ab43743e42638564a2d1 ("cxgb4/cxgb4vf: Code cleanup to enable T4 Configuration File support"), we have failures like this during cxgb4 probe: cxgb4 0000:01:00.4: bad SGE FL page buffer sizes [65536, 65536] cxgb4: probe of 0000:01:00.4 failed with error -22 This happens whenever software parameters are used, without a configuration file. That happens when the hardware was already initialized (after kexec, or after csiostor is loaded). It happens that these values are acceptable, rendering fl_pg_order equal to 0, which is the case of a hard init when the page size is equal or larger than 65536. Accepting fl_large_pg equal to fl_small_pg solves the issue, and shouldn't cause any trouble besides a possible performance reduction when smaller pages are used. And that can be fixed by a configuration file. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/sge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index cc380c36e1a8..cc3511a5cd0c 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -2581,7 +2581,7 @@ static int t4_sge_init_soft(struct adapter *adap) #undef READ_FL_BUF if (fl_small_pg != PAGE_SIZE || - (fl_large_pg != 0 && (fl_large_pg <= fl_small_pg || + (fl_large_pg != 0 && (fl_large_pg < fl_small_pg || (fl_large_pg & (fl_large_pg-1)) != 0))) { dev_err(adap->pdev_dev, "bad SGE FL page buffer sizes [%d, %d]\n", fl_small_pg, fl_large_pg); -- cgit v1.2.3 From 7bda701e012373ca53c9d837b7b25131852e0238 Mon Sep 17 00:00:00 2001 From: "fan.du" Date: Fri, 3 Jan 2014 10:18:58 +0800 Subject: {vxlan, inet6} Mark vxlan_dev flags with VXLAN_F_IPV6 properly Even if user doesn't supply the physical netdev to attach vxlan dev to, and at the same time user want to vxlan sit top of IPv6, mark vxlan_dev flags with VXLAN_F_IPV6 to create IPv6 based socket. Otherwise kernel crashes safely every time spitting below messages, Steps to reproduce: ip link add vxlan0 type vxlan id 42 group ff0e::110 ip link set vxlan0 up [ 62.656266] BUG: unable to handle kernel NULL pointer dereference[ 62.656320] ip (3008) used greatest stack depth: 3912 bytes left at 0000000000000046 [ 62.656423] IP: [] ip6_route_output+0xbd/0xe0 [ 62.656525] PGD 2c966067 PUD 2c9a2067 PMD 0 [ 62.656674] Oops: 0000 [#1] SMP [ 62.656781] Modules linked in: vxlan netconsole deflate zlib_deflate af_key [ 62.657083] CPU: 1 PID: 2128 Comm: whoopsie Not tainted 3.12.0+ #182 [ 62.657083] Hardware name: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006 [ 62.657083] task: ffff88002e2335d0 ti: ffff88002c94c000 task.ti: ffff88002c94c000 [ 62.657083] RIP: 0010:[] [] ip6_route_output+0xbd/0xe0 [ 62.657083] RSP: 0000:ffff88002fd038f8 EFLAGS: 00210296 [ 62.657083] RAX: 0000000000000000 RBX: ffff88002fd039e0 RCX: 0000000000000000 [ 62.657083] RDX: ffff88002fd0eb68 RSI: ffff88002fd0d278 RDI: ffff88002fd0d278 [ 62.657083] RBP: ffff88002fd03918 R08: 0000000002000000 R09: 0000000000000000 [ 62.657083] R10: 00000000000001ff R11: 0000000000000000 R12: 0000000000000001 [ 62.657083] R13: ffff88002d96b480 R14: ffffffff81c8e2c0 R15: 0000000000000001 [ 62.657083] FS: 0000000000000000(0000) GS:ffff88002fd00000(0063) knlGS:00000000f693b740 [ 62.657083] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 62.657083] CR2: 0000000000000046 CR3: 000000002c9d2000 CR4: 00000000000006e0 [ 62.657083] Stack: [ 62.657083] ffff88002fd03a40 ffffffff81c8e2c0 ffff88002fd039e0 ffff88002d96b480 [ 62.657083] ffff88002fd03958 ffffffff816cac8b ffff880019277cc0 ffff8800192b5d00 [ 62.657083] ffff88002d5bc000 ffff880019277cc0 0000000000001821 0000000000000001 [ 62.657083] Call Trace: [ 62.657083] [ 62.657083] [] ip6_dst_lookup_tail+0xdb/0xf0 [ 62.657083] [] ip6_dst_lookup+0x10/0x20 [ 62.657083] [] vxlan_xmit_one+0x193/0x9c0 [vxlan] [ 62.657083] [] ? account+0xc7/0x1f0 [ 62.657083] [] vxlan_xmit+0xd3/0x400 [vxlan] [ 62.657083] [] dev_hard_start_xmit+0x49d/0x5e0 [ 62.657083] [] dev_queue_xmit+0x2d9/0x480 [ 62.657083] [] ? _raw_write_unlock_bh+0x14/0x20 [ 62.657083] [] ? eth_header+0x35/0xe0 [ 62.657083] [] neigh_resolve_output+0x11e/0x1e0 [ 62.657083] [] ? ip6_fragment+0xad0/0xad0 [ 62.657083] [] ip6_finish_output2+0x2f5/0x470 [ 62.657083] [] ip6_finish_output+0x86/0xc0 [ 62.657083] [] ip6_output+0x78/0xb0 [ 62.657083] [] mld_sendpack+0x256/0x2a0 [ 62.657083] [] mld_ifc_timer_expire+0x17c/0x290 [ 62.657083] [] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [] call_timer_fn+0x45/0x150 [ 62.657083] [] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [] run_timer_softirq+0x1f3/0x2a0 [ 62.657083] [] ? lapic_next_event+0x18/0x20 [ 62.657083] [] ? clockevents_program_event+0x6f/0x110 [ 62.657083] [] __do_softirq+0xd6/0x2b0 [ 62.657083] [] irq_exit+0x7e/0xa0 [ 62.657083] [] smp_apic_timer_interrupt+0x45/0x60 [ 62.657083] [] apic_timer_interrupt+0x6a/0x70 [ 62.657083] [ 62.657083] [] ? sysenter_dispatch+0x7/0x1a [ 62.657083] Code: 4d 8b 85 a8 02 00 00 4c 89 e9 ba 03 04 00 00 48 c7 c6 c0 be 8d 81 48 c7 c7 48 35 a3 81 31 c0 e8 db 68 0e 00 49 8b 85 a8 02 00 00 <0f> b6 40 46 c0 e8 05 0f b6 c0 c1 e0 03 41 09 c4 e9 77 ff ff ff [ 62.657083] RIP [] ip6_route_output+0xbd/0xe0 [ 62.657083] RSP [ 62.657083] CR2: 0000000000000046 [ 62.657083] ---[ end trace ba8a9583d7cd1934 ]--- [ 62.657083] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Fan Du Reported-by: Ryan Whelan Acked-by: Cong Wang Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 249e01c5600c..ed384fee76ac 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -2440,7 +2440,8 @@ static int vxlan_newlink(struct net *net, struct net_device *dev, /* update header length based on lower device */ dev->hard_header_len = lowerdev->hard_header_len + (use_ipv6 ? VXLAN6_HEADROOM : VXLAN_HEADROOM); - } + } else if (use_ipv6) + vxlan->flags |= VXLAN_F_IPV6; if (data[IFLA_VXLAN_TOS]) vxlan->tos = nla_get_u8(data[IFLA_VXLAN_TOS]); -- cgit v1.2.3 From 0d68fc4f1210f8caea2bdd68f99dc6da35ee3740 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Fri, 3 Jan 2014 11:33:45 +0800 Subject: infiniband: make sure the src net is infiniband when create new link When we create a new infiniband link with uninfiniband device, e.g. `ip link add link em1 type ipoib pkey 0x8001`. We will get a NULL pointer dereference cause other dev like Ethernet don't have struct ib_device. The code path is: rtnl_newlink |-- ipoib_new_child_link |-- __ipoib_vlan_add |-- ipoib_set_dev_features |-- ib_query_device Fix this bug by make sure the src net is infiniband when create new link. Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/ulp/ipoib/ipoib_netlink.c b/drivers/infiniband/ulp/ipoib/ipoib_netlink.c index c29b5c838833..cdc7df4fdb8a 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_netlink.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_netlink.c @@ -31,6 +31,7 @@ */ #include +#include /* For ARPHRD_xxx */ #include #include #include "ipoib.h" @@ -103,7 +104,7 @@ static int ipoib_new_child_link(struct net *src_net, struct net_device *dev, return -EINVAL; pdev = __dev_get_by_index(src_net, nla_get_u32(tb[IFLA_LINK])); - if (!pdev) + if (!pdev || pdev->type != ARPHRD_INFINIBAND) return -ENODEV; ppriv = netdev_priv(pdev); -- cgit v1.2.3 From a02bdd423d844f5beb3196922f07c85c2f7691b8 Mon Sep 17 00:00:00 2001 From: Shahed Shaikh Date: Fri, 3 Jan 2014 01:34:28 -0500 Subject: qlcnic: Fix bug in Tx completion path o Driver is using common tx_clean_lock for all Tx queues. This patch adds per queue tx_clean_lock. o Driver is not updating sw_consumer while processing Tx completion when interface is going down. Fixed in this patch. Signed-off-by: Shahed Shaikh Signed-off-by: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 3 ++- drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c | 4 ++++ drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c | 8 +++++--- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 4 +--- 4 files changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index 4dfef81e3c45..ff80cd8f6d2b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -579,6 +579,8 @@ struct qlcnic_host_tx_ring { dma_addr_t phys_addr; dma_addr_t hw_cons_phys_addr; struct netdev_queue *txq; + /* Lock to protect Tx descriptors cleanup */ + spinlock_t tx_clean_lock; } ____cacheline_internodealigned_in_smp; /* @@ -1095,7 +1097,6 @@ struct qlcnic_adapter { struct qlcnic_filter_hash rx_fhash; struct list_head vf_mc_list; - spinlock_t tx_clean_lock; spinlock_t mac_learn_lock; /* spinlock for catching rcv filters for eswitch traffic */ spinlock_t rx_mac_learn_lock; diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c index e9c21e5d0ca9..c4262c23ed7c 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c @@ -134,6 +134,8 @@ void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter, struct qlcnic_skb_frag *buffrag; int i, j; + spin_lock(&tx_ring->tx_clean_lock); + cmd_buf = tx_ring->cmd_buf_arr; for (i = 0; i < tx_ring->num_desc; i++) { buffrag = cmd_buf->frag_array; @@ -157,6 +159,8 @@ void qlcnic_release_tx_buffers(struct qlcnic_adapter *adapter, } cmd_buf++; } + + spin_unlock(&tx_ring->tx_clean_lock); } void qlcnic_free_sw_resources(struct qlcnic_adapter *adapter) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c index 136297631999..ad1531ae3aa8 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c @@ -782,7 +782,7 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter, struct net_device *netdev = adapter->netdev; struct qlcnic_skb_frag *frag; - if (!spin_trylock(&adapter->tx_clean_lock)) + if (!spin_trylock(&tx_ring->tx_clean_lock)) return 1; sw_consumer = tx_ring->sw_consumer; @@ -811,8 +811,9 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter, break; } + tx_ring->sw_consumer = sw_consumer; + if (count && netif_running(netdev)) { - tx_ring->sw_consumer = sw_consumer; smp_mb(); if (netif_tx_queue_stopped(tx_ring->txq) && netif_carrier_ok(netdev)) { @@ -838,7 +839,8 @@ static int qlcnic_process_cmd_ring(struct qlcnic_adapter *adapter, */ hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer)); done = (sw_consumer == hw_consumer); - spin_unlock(&adapter->tx_clean_lock); + + spin_unlock(&tx_ring->tx_clean_lock); return done; } diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index 2c8cac0c6a55..b8a245a79de3 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -1756,7 +1756,6 @@ void __qlcnic_down(struct qlcnic_adapter *adapter, struct net_device *netdev) if (qlcnic_sriov_vf_check(adapter)) qlcnic_sriov_cleanup_async_list(&adapter->ahw->sriov->bc); smp_mb(); - spin_lock(&adapter->tx_clean_lock); netif_carrier_off(netdev); adapter->ahw->linkup = 0; netif_tx_disable(netdev); @@ -1777,7 +1776,6 @@ void __qlcnic_down(struct qlcnic_adapter *adapter, struct net_device *netdev) for (ring = 0; ring < adapter->drv_tx_rings; ring++) qlcnic_release_tx_buffers(adapter, &adapter->tx_ring[ring]); - spin_unlock(&adapter->tx_clean_lock); } /* Usage: During suspend and firmware recovery module */ @@ -2172,6 +2170,7 @@ int qlcnic_alloc_tx_rings(struct qlcnic_adapter *adapter, } memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(tx_ring)); tx_ring->cmd_buf_arr = cmd_buf_arr; + spin_lock_init(&tx_ring->tx_clean_lock); } if (qlcnic_83xx_check(adapter) || @@ -2299,7 +2298,6 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) rwlock_init(&adapter->ahw->crb_lock); mutex_init(&adapter->ahw->mem_lock); - spin_lock_init(&adapter->tx_clean_lock); INIT_LIST_HEAD(&adapter->mac_list); qlcnic_register_dcb(adapter); -- cgit v1.2.3 From e848582cee23f7ab540ec49ab1c7d7f8bfefcd84 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Sun, 5 Jan 2014 18:33:50 +0200 Subject: bnx2x: limit number of interrupt vectors for 57711 Original straightforward division may lead to zeroing number of SB and null-pointer dereference when device is short of MSIX vectors or lacks MSIX capabilities. Reported-by: Vladislav Zolotarov Signed-off-by: Dmitry Kravkov Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 ++ drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 6 +++--- 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index a1f66e2c9a86..cb30d1a3d3ad 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -2499,4 +2499,6 @@ void bnx2x_set_local_cmng(struct bnx2x *bp); #define MCPR_SCRATCH_BASE(bp) \ (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH) +#define E1H_MAX_MF_SB_COUNT (HC_SB_MAX_SB_E1X/(E1HVN_MAX * PORT_MAX)) + #endif /* bnx2x.h */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 814d0eca9b33..8b3107b2fcc1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -11447,9 +11447,9 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp) } } - /* adjust igu_sb_cnt to MF for E1x */ - if (CHIP_IS_E1x(bp) && IS_MF(bp)) - bp->igu_sb_cnt /= E1HVN_MAX; + /* adjust igu_sb_cnt to MF for E1H */ + if (CHIP_IS_E1H(bp) && IS_MF(bp)) + bp->igu_sb_cnt = min_t(u8, bp->igu_sb_cnt, E1H_MAX_MF_SB_COUNT); /* port info */ bnx2x_get_port_hwinfo(bp); -- cgit v1.2.3 From 89e18ae6e6288deb1940cd16afe4e6983545defa Mon Sep 17 00:00:00 2001 From: Michal Kalderon Date: Sun, 5 Jan 2014 18:33:51 +0200 Subject: bnx2x: Correct number of MSI-X vectors for VFs Number of VFs in PCIe configuration space is zero-based. Driver incorrectly sets the number of VFs to be larger by one than what actually is feasible by HW, which might cause later VFs to fail to allocate their MSI-X interrupts. Signed-off-by: Michal Kalderon Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index 2e46c28fc601..ddd95b9fa6cf 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -3202,13 +3202,16 @@ int bnx2x_enable_sriov(struct bnx2x *bp) bnx2x_iov_static_resc(bp, vf); } - /* prepare msix vectors in VF configuration space */ + /* prepare msix vectors in VF configuration space - the value in the + * PCI configuration space should be the index of the last entry, + * namely one less than the actual size of the table + */ for (vf_idx = first_vf; vf_idx < first_vf + req_vfs; vf_idx++) { bnx2x_pretend_func(bp, HW_VF_HANDLE(bp, vf_idx)); REG_WR(bp, PCICFG_OFFSET + GRC_CONFIG_REG_VF_MSIX_CONTROL, - num_vf_queues); + num_vf_queues - 1); DP(BNX2X_MSG_IOV, "set msix vec num in VF %d cfg space to %d\n", - vf_idx, num_vf_queues); + vf_idx, num_vf_queues - 1); } bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); -- cgit v1.2.3 From 5b622918cd6f4ff5b5200ea6b2e48ae2fa6ad09e Mon Sep 17 00:00:00 2001 From: Michal Kalderon Date: Sun, 5 Jan 2014 18:33:52 +0200 Subject: bnx2x: Clean before update RSS arrives When a PF receives a VF message indicating a change in RSS properties it should clean the flags' bit-fields; Otherwise, it's possible that some random values will be considered as flags by the lower layers configuring the RSS in FW. Signed-off-by: Michal Kalderon Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 5 ++++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 3 +++ 2 files changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 32c92abf5094..95feada2549a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -4382,8 +4382,11 @@ int bnx2x_config_rss(struct bnx2x *bp, struct bnx2x_raw_obj *r = &o->raw; /* Do nothing if only driver cleanup was requested */ - if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags)) + if (test_bit(RAMROD_DRV_CLR_ONLY, &p->ramrod_flags)) { + DP(BNX2X_MSG_SP, "Not configuring RSS ramrod_flags=%lx\n", + p->ramrod_flags); return 0; + } r->set_pending(r); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 3dc2537fe91b..26fcba2dd94d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -1805,6 +1805,9 @@ static void bnx2x_vf_mbx_update_rss(struct bnx2x *bp, struct bnx2x_virtf *vf, vf_op_params->rss_result_mask = rss_tlv->rss_result_mask; /* flags handled individually for backward/forward compatability */ + vf_op_params->rss_flags = 0; + vf_op_params->ramrod_flags = 0; + if (rss_tlv->rss_flags & VFPF_RSS_MODE_DISABLED) __set_bit(BNX2X_RSS_MODE_DISABLED, &vf_op_params->rss_flags); if (rss_tlv->rss_flags & VFPF_RSS_MODE_REGULAR) -- cgit v1.2.3 From 9dfef3adaebb42163d691be73e05b12da440cbe5 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 5 Jan 2014 18:33:53 +0200 Subject: bnx2x: fix AFEX memory overflow There are 2 different (related) flows in the slowpath configuration that utilize the same pointer and cast it to different structs; This is obviously incorrect as the intended allocated memory is that of the smaller struct, possibly causing the flow utilizing the larger struct to corrupt other slowpath configuration. Since both flows are exclusive, set the allocated memory to be a union of both structs. Reported-by: Dan Carpenter Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index cb30d1a3d3ad..2d5fce4c9751 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1250,7 +1250,10 @@ struct bnx2x_slowpath { * Therefore, if they would have been defined in the same union, * data can get corrupted. */ - struct afex_vif_list_ramrod_data func_afex_rdata; + union { + struct afex_vif_list_ramrod_data viflist_data; + struct function_update_data func_update; + } func_afex_rdata; /* used by dmae command executer */ struct dmae_command dmae[MAX_DMAE_C]; -- cgit v1.2.3 From e8379c79542c95b25890ed49be652b1634deca17 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Sun, 5 Jan 2014 18:33:54 +0200 Subject: bnx2x: fix VLAN configuration for VFs. If the hypervisor configures a vlan for the VF via the PF, the expected result is that only packets tagged by said vlan will be received by the VF (and that vlan will be silently removed). Due to an incorrect manipulation of vlan filters in the driver, the VF can receive untagged traffic even if the hypervisor configured some vlan for it. This patch corrects the behaviour. Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 10 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h | 7 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 245 ++++++++++++---------- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 23 +- 5 files changed, 174 insertions(+), 112 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 95feada2549a..18438a504d57 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -2038,6 +2038,7 @@ static int bnx2x_vlan_mac_del_all(struct bnx2x *bp, struct bnx2x_vlan_mac_ramrod_params p; struct bnx2x_exe_queue_obj *exeq = &o->exe_queue; struct bnx2x_exeq_elem *exeq_pos, *exeq_pos_n; + unsigned long flags; int read_lock; int rc = 0; @@ -2046,8 +2047,9 @@ static int bnx2x_vlan_mac_del_all(struct bnx2x *bp, spin_lock_bh(&exeq->lock); list_for_each_entry_safe(exeq_pos, exeq_pos_n, &exeq->exe_queue, link) { - if (exeq_pos->cmd_data.vlan_mac.vlan_mac_flags == - *vlan_mac_flags) { + flags = exeq_pos->cmd_data.vlan_mac.vlan_mac_flags; + if (BNX2X_VLAN_MAC_CMP_FLAGS(flags) == + BNX2X_VLAN_MAC_CMP_FLAGS(*vlan_mac_flags)) { rc = exeq->remove(bp, exeq->owner, exeq_pos); if (rc) { BNX2X_ERR("Failed to remove command\n"); @@ -2080,7 +2082,9 @@ static int bnx2x_vlan_mac_del_all(struct bnx2x *bp, return read_lock; list_for_each_entry(pos, &o->head, link) { - if (pos->vlan_mac_flags == *vlan_mac_flags) { + flags = pos->vlan_mac_flags; + if (BNX2X_VLAN_MAC_CMP_FLAGS(flags) == + BNX2X_VLAN_MAC_CMP_FLAGS(*vlan_mac_flags)) { p.user_req.vlan_mac_flags = pos->vlan_mac_flags; memcpy(&p.user_req.u, &pos->u, sizeof(pos->u)); rc = bnx2x_config_vlan_mac(bp, &p); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h index 658f4e33abf9..6a53c15c85a3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h @@ -266,6 +266,13 @@ enum { BNX2X_DONT_CONSUME_CAM_CREDIT, BNX2X_DONT_CONSUME_CAM_CREDIT_DEST, }; +/* When looking for matching filters, some flags are not interesting */ +#define BNX2X_VLAN_MAC_CMP_MASK (1 << BNX2X_UC_LIST_MAC | \ + 1 << BNX2X_ETH_MAC | \ + 1 << BNX2X_ISCSI_ETH_MAC | \ + 1 << BNX2X_NETQ_ETH_MAC) +#define BNX2X_VLAN_MAC_CMP_FLAGS(flags) \ + ((flags) & BNX2X_VLAN_MAC_CMP_MASK) struct bnx2x_vlan_mac_ramrod_params { /* Object to run the command from */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index ddd95b9fa6cf..e7845e5be1c7 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1209,6 +1209,11 @@ static void bnx2x_vfop_rxmode(struct bnx2x *bp, struct bnx2x_virtf *vf) /* next state */ vfop->state = BNX2X_VFOP_RXMODE_DONE; + /* record the accept flags in vfdb so hypervisor can modify them + * if necessary + */ + bnx2x_vfq(vf, ramrod->cl_id - vf->igu_base_id, accept_flags) = + ramrod->rx_accept_flags; vfop->rc = bnx2x_config_rx_mode(bp, ramrod); bnx2x_vfop_finalize(vf, vfop->rc, VFOP_DONE); op_err: @@ -1224,39 +1229,43 @@ op_pending: return; } +static void bnx2x_vf_prep_rx_mode(struct bnx2x *bp, u8 qid, + struct bnx2x_rx_mode_ramrod_params *ramrod, + struct bnx2x_virtf *vf, + unsigned long accept_flags) +{ + struct bnx2x_vf_queue *vfq = vfq_get(vf, qid); + + memset(ramrod, 0, sizeof(*ramrod)); + ramrod->cid = vfq->cid; + ramrod->cl_id = vfq_cl_id(vf, vfq); + ramrod->rx_mode_obj = &bp->rx_mode_obj; + ramrod->func_id = FW_VF_HANDLE(vf->abs_vfid); + ramrod->rx_accept_flags = accept_flags; + ramrod->tx_accept_flags = accept_flags; + ramrod->pstate = &vf->filter_state; + ramrod->state = BNX2X_FILTER_RX_MODE_PENDING; + + set_bit(BNX2X_FILTER_RX_MODE_PENDING, &vf->filter_state); + set_bit(RAMROD_RX, &ramrod->ramrod_flags); + set_bit(RAMROD_TX, &ramrod->ramrod_flags); + + ramrod->rdata = bnx2x_vf_sp(bp, vf, rx_mode_rdata.e2); + ramrod->rdata_mapping = bnx2x_vf_sp_map(bp, vf, rx_mode_rdata.e2); +} + int bnx2x_vfop_rxmode_cmd(struct bnx2x *bp, struct bnx2x_virtf *vf, struct bnx2x_vfop_cmd *cmd, int qid, unsigned long accept_flags) { - struct bnx2x_vf_queue *vfq = vfq_get(vf, qid); struct bnx2x_vfop *vfop = bnx2x_vfop_add(bp, vf); if (vfop) { struct bnx2x_rx_mode_ramrod_params *ramrod = &vf->op_params.rx_mode; - memset(ramrod, 0, sizeof(*ramrod)); - - /* Prepare ramrod parameters */ - ramrod->cid = vfq->cid; - ramrod->cl_id = vfq_cl_id(vf, vfq); - ramrod->rx_mode_obj = &bp->rx_mode_obj; - ramrod->func_id = FW_VF_HANDLE(vf->abs_vfid); - - ramrod->rx_accept_flags = accept_flags; - ramrod->tx_accept_flags = accept_flags; - ramrod->pstate = &vf->filter_state; - ramrod->state = BNX2X_FILTER_RX_MODE_PENDING; - - set_bit(BNX2X_FILTER_RX_MODE_PENDING, &vf->filter_state); - set_bit(RAMROD_RX, &ramrod->ramrod_flags); - set_bit(RAMROD_TX, &ramrod->ramrod_flags); - - ramrod->rdata = - bnx2x_vf_sp(bp, vf, rx_mode_rdata.e2); - ramrod->rdata_mapping = - bnx2x_vf_sp_map(bp, vf, rx_mode_rdata.e2); + bnx2x_vf_prep_rx_mode(bp, qid, ramrod, vf, accept_flags); bnx2x_vfop_opset(BNX2X_VFOP_RXMODE_CONFIG, bnx2x_vfop_rxmode, cmd->done); @@ -3439,10 +3448,18 @@ out: int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos) { + struct bnx2x_queue_state_params q_params = {NULL}; + struct bnx2x_vlan_mac_ramrod_params ramrod_param; + struct bnx2x_queue_update_params *update_params; + struct pf_vf_bulletin_content *bulletin = NULL; + struct bnx2x_rx_mode_ramrod_params rx_ramrod; struct bnx2x *bp = netdev_priv(dev); - int rc, q_logical_state; + struct bnx2x_vlan_mac_obj *vlan_obj; + unsigned long vlan_mac_flags = 0; + unsigned long ramrod_flags = 0; struct bnx2x_virtf *vf = NULL; - struct pf_vf_bulletin_content *bulletin = NULL; + unsigned long accept_flags; + int rc; /* sanity and init */ rc = bnx2x_vf_ndo_prep(bp, vfidx, &vf, &bulletin); @@ -3460,104 +3477,118 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos) /* update PF's copy of the VF's bulletin. No point in posting the vlan * to the VF since it doesn't have anything to do with it. But it useful * to store it here in case the VF is not up yet and we can only - * configure the vlan later when it does. + * configure the vlan later when it does. Treat vlan id 0 as remove the + * Host tag. */ - bulletin->valid_bitmap |= 1 << VLAN_VALID; + if (vlan > 0) + bulletin->valid_bitmap |= 1 << VLAN_VALID; + else + bulletin->valid_bitmap &= ~(1 << VLAN_VALID); bulletin->vlan = vlan; /* is vf initialized and queue set up? */ - q_logical_state = - bnx2x_get_q_logical_state(bp, &bnx2x_leading_vfq(vf, sp_obj)); - if (vf->state == VF_ENABLED && - q_logical_state == BNX2X_Q_LOGICAL_STATE_ACTIVE) { - /* configure the vlan in device on this vf's queue */ - unsigned long ramrod_flags = 0; - unsigned long vlan_mac_flags = 0; - struct bnx2x_vlan_mac_obj *vlan_obj = - &bnx2x_leading_vfq(vf, vlan_obj); - struct bnx2x_vlan_mac_ramrod_params ramrod_param; - struct bnx2x_queue_state_params q_params = {NULL}; - struct bnx2x_queue_update_params *update_params; + if (vf->state != VF_ENABLED || + bnx2x_get_q_logical_state(bp, &bnx2x_leading_vfq(vf, sp_obj)) != + BNX2X_Q_LOGICAL_STATE_ACTIVE) + return rc; - rc = validate_vlan_mac(bp, &bnx2x_leading_vfq(vf, mac_obj)); - if (rc) - return rc; - memset(&ramrod_param, 0, sizeof(ramrod_param)); + /* configure the vlan in device on this vf's queue */ + vlan_obj = &bnx2x_leading_vfq(vf, vlan_obj); + rc = validate_vlan_mac(bp, &bnx2x_leading_vfq(vf, mac_obj)); + if (rc) + return rc; - /* must lock vfpf channel to protect against vf flows */ - bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN); + /* must lock vfpf channel to protect against vf flows */ + bnx2x_lock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN); - /* remove existing vlans */ - __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); - rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_mac_flags, - &ramrod_flags); - if (rc) { - BNX2X_ERR("failed to delete vlans\n"); - rc = -EINVAL; - goto out; - } + /* remove existing vlans */ + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + rc = vlan_obj->delete_all(bp, vlan_obj, &vlan_mac_flags, + &ramrod_flags); + if (rc) { + BNX2X_ERR("failed to delete vlans\n"); + rc = -EINVAL; + goto out; + } + + /* need to remove/add the VF's accept_any_vlan bit */ + accept_flags = bnx2x_leading_vfq(vf, accept_flags); + if (vlan) + clear_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags); + else + set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept_flags); + + bnx2x_vf_prep_rx_mode(bp, LEADING_IDX, &rx_ramrod, vf, + accept_flags); + bnx2x_leading_vfq(vf, accept_flags) = accept_flags; + bnx2x_config_rx_mode(bp, &rx_ramrod); + + /* configure the new vlan to device */ + memset(&ramrod_param, 0, sizeof(ramrod_param)); + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + ramrod_param.vlan_mac_obj = vlan_obj; + ramrod_param.ramrod_flags = ramrod_flags; + set_bit(BNX2X_DONT_CONSUME_CAM_CREDIT, + &ramrod_param.user_req.vlan_mac_flags); + ramrod_param.user_req.u.vlan.vlan = vlan; + ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD; + rc = bnx2x_config_vlan_mac(bp, &ramrod_param); + if (rc) { + BNX2X_ERR("failed to configure vlan\n"); + rc = -EINVAL; + goto out; + } - /* send queue update ramrod to configure default vlan and silent - * vlan removal + /* send queue update ramrod to configure default vlan and silent + * vlan removal + */ + __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); + q_params.cmd = BNX2X_Q_CMD_UPDATE; + q_params.q_obj = &bnx2x_leading_vfq(vf, sp_obj); + update_params = &q_params.params.update; + __set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG, + &update_params->update_flags); + __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG, + &update_params->update_flags); + if (vlan == 0) { + /* if vlan is 0 then we want to leave the VF traffic + * untagged, and leave the incoming traffic untouched + * (i.e. do not remove any vlan tags). */ - __set_bit(RAMROD_COMP_WAIT, &q_params.ramrod_flags); - q_params.cmd = BNX2X_Q_CMD_UPDATE; - q_params.q_obj = &bnx2x_leading_vfq(vf, sp_obj); - update_params = &q_params.params.update; - __set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN_CHNG, + __clear_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN, + &update_params->update_flags); + __clear_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM, + &update_params->update_flags); + } else { + /* configure default vlan to vf queue and set silent + * vlan removal (the vf remains unaware of this vlan). + */ + __set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN, &update_params->update_flags); - __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG, + __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM, &update_params->update_flags); + update_params->def_vlan = vlan; + update_params->silent_removal_value = + vlan & VLAN_VID_MASK; + update_params->silent_removal_mask = VLAN_VID_MASK; + } - if (vlan == 0) { - /* if vlan is 0 then we want to leave the VF traffic - * untagged, and leave the incoming traffic untouched - * (i.e. do not remove any vlan tags). - */ - __clear_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN, - &update_params->update_flags); - __clear_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM, - &update_params->update_flags); - } else { - /* configure the new vlan to device */ - __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); - ramrod_param.vlan_mac_obj = vlan_obj; - ramrod_param.ramrod_flags = ramrod_flags; - ramrod_param.user_req.u.vlan.vlan = vlan; - ramrod_param.user_req.cmd = BNX2X_VLAN_MAC_ADD; - rc = bnx2x_config_vlan_mac(bp, &ramrod_param); - if (rc) { - BNX2X_ERR("failed to configure vlan\n"); - rc = -EINVAL; - goto out; - } - - /* configure default vlan to vf queue and set silent - * vlan removal (the vf remains unaware of this vlan). - */ - update_params = &q_params.params.update; - __set_bit(BNX2X_Q_UPDATE_DEF_VLAN_EN, - &update_params->update_flags); - __set_bit(BNX2X_Q_UPDATE_SILENT_VLAN_REM, - &update_params->update_flags); - update_params->def_vlan = vlan; - } + /* Update the Queue state */ + rc = bnx2x_queue_state_change(bp, &q_params); + if (rc) { + BNX2X_ERR("Failed to configure default VLAN\n"); + goto out; + } - /* Update the Queue state */ - rc = bnx2x_queue_state_change(bp, &q_params); - if (rc) { - BNX2X_ERR("Failed to configure default VLAN\n"); - goto out; - } - /* clear the flag indicating that this VF needs its vlan - * (will only be set if the HV configured the Vlan before vf was - * up and we were called because the VF came up later - */ + /* clear the flag indicating that this VF needs its vlan + * (will only be set if the HV configured the Vlan before vf was + * up and we were called because the VF came up later + */ out: - vf->cfg_flags &= ~VF_CFG_VLAN; - bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN); - } + vf->cfg_flags &= ~VF_CFG_VLAN; + bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN); + return rc; } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h index 1ff6a9366629..8c213fa52174 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h @@ -74,6 +74,7 @@ struct bnx2x_vf_queue { /* VLANs object */ struct bnx2x_vlan_mac_obj vlan_obj; atomic_t vlan_count; /* 0 means vlan-0 is set ~ untagged */ + unsigned long accept_flags; /* last accept flags configured */ /* Queue Slow-path State object */ struct bnx2x_queue_sp_obj sp_obj; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c index 26fcba2dd94d..0756d7dabdd5 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c @@ -1598,6 +1598,8 @@ static void bnx2x_vfop_mbx_qfilters(struct bnx2x *bp, struct bnx2x_virtf *vf) if (msg->flags & VFPF_SET_Q_FILTERS_RX_MASK_CHANGED) { unsigned long accept = 0; + struct pf_vf_bulletin_content *bulletin = + BP_VF_BULLETIN(bp, vf->index); /* covert VF-PF if mask to bnx2x accept flags */ if (msg->rx_mask & VFPF_RX_MASK_ACCEPT_MATCHED_UNICAST) @@ -1617,9 +1619,11 @@ static void bnx2x_vfop_mbx_qfilters(struct bnx2x *bp, struct bnx2x_virtf *vf) __set_bit(BNX2X_ACCEPT_BROADCAST, &accept); /* A packet arriving the vf's mac should be accepted - * with any vlan + * with any vlan, unless a vlan has already been + * configured. */ - __set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept); + if (!(bulletin->valid_bitmap & (1 << VLAN_VALID))) + __set_bit(BNX2X_ACCEPT_ANY_VLAN, &accept); /* set rx-mode */ rc = bnx2x_vfop_rxmode_cmd(bp, vf, &cmd, @@ -1710,6 +1714,21 @@ static void bnx2x_vf_mbx_set_q_filters(struct bnx2x *bp, goto response; } } + /* if vlan was set by hypervisor we don't allow guest to config vlan */ + if (bulletin->valid_bitmap & 1 << VLAN_VALID) { + int i; + + /* search for vlan filters */ + for (i = 0; i < filters->n_mac_vlan_filters; i++) { + if (filters->filters[i].flags & + VFPF_Q_FILTER_VLAN_TAG_VALID) { + BNX2X_ERR("VF[%d] attempted to configure vlan but one was already set by Hypervisor. Aborting request\n", + vf->abs_vfid); + vf->op_rc = -EPERM; + goto response; + } + } + } /* verify vf_qid */ if (filters->vf_qid > vf_rxq_count(vf)) -- cgit v1.2.3 From 7d30622dbe64a7207af8a98f48d4a4ef00ab658a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 5 Jan 2014 22:08:25 -0200 Subject: fec: Revert "fec: Do not assume that PHY reset is active low" In order to keep DT compatibility we need to revert this, otherwise the original dts files will no longer work with this driver change. This reverts commit 7a399e3a2e05bc580a78ea72371b3896827f72e1. Signed-off-by: Fabio Estevam Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/fec_main.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 45b8b22b9987..50bb71c663e2 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -2049,8 +2049,6 @@ static void fec_reset_phy(struct platform_device *pdev) int err, phy_reset; int msec = 1; struct device_node *np = pdev->dev.of_node; - enum of_gpio_flags flags; - bool port; if (!np) return; @@ -2060,22 +2058,18 @@ static void fec_reset_phy(struct platform_device *pdev) if (msec > 1000) msec = 1; - phy_reset = of_get_named_gpio_flags(np, "phy-reset-gpios", 0, &flags); + phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0); if (!gpio_is_valid(phy_reset)) return; - if (flags & OF_GPIO_ACTIVE_LOW) - port = GPIOF_OUT_INIT_LOW; - else - port = GPIOF_OUT_INIT_HIGH; - - err = devm_gpio_request_one(&pdev->dev, phy_reset, port, "phy-reset"); + err = devm_gpio_request_one(&pdev->dev, phy_reset, + GPIOF_OUT_INIT_LOW, "phy-reset"); if (err) { dev_err(&pdev->dev, "failed to get phy-reset-gpios: %d\n", err); return; } msleep(msec); - gpio_set_value(phy_reset, !port); + gpio_set_value(phy_reset, 1); } #else /* CONFIG_OF */ static void fec_reset_phy(struct platform_device *pdev) -- cgit v1.2.3 From f35f76ee76df008131bbe01a2297de0c55ee2297 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Sun, 5 Jan 2014 10:24:01 -0500 Subject: xen-netback: Include header for vmalloc Commit ac3d5ac27735 ("xen-netback: fix guest-receive-side array sizes") added calls to vmalloc and vfree in the interface.c file without including . This causes build failures if the -Werror=implicit-function-declaration flag is passed. Signed-off-by: Josh Boyer Acked-by: Wei Liu Signed-off-by: David S. Miller --- drivers/net/xen-netback/interface.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index 34ca4e58a43d..fff8cddfed81 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From da1388d655292a11b5e9c011532e9ca83f77e1d3 Mon Sep 17 00:00:00 2001 From: Vasundhara Volam Date: Mon, 6 Jan 2014 13:02:23 +0530 Subject: be2net: disable RSS when number of RXQs is reduced to 1 via set-channels When *only* the default RXQ is used, the RSS policy must be disabled so that all IP and no-IP traffic is placed into the default RXQ. If not, IP traffic is dropped. Also, issue the RSS_CONFIG cmd only if FW advertises RSS capability for the interface. Signed-off-by: Vasundhara Volam Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_cmds.c | 3 +++ drivers/net/ethernet/emulex/benet/be_main.c | 15 +++++++++------ 2 files changed, 12 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index e0e8bc1ef14c..b84902e451fa 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -2017,6 +2017,9 @@ int be_cmd_rss_config(struct be_adapter *adapter, u8 *rsstable, 0x3ea83c02, 0x4a110304}; int status; + if (!(be_if_cap_flags(adapter) & BE_IF_FLAGS_RSS)) + return 0; + if (mutex_lock_interruptible(&adapter->mbox_lock)) return -1; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 0fde69d5cb6a..6b774a5279af 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2744,13 +2744,16 @@ static int be_rx_qs_create(struct be_adapter *adapter) if (!BEx_chip(adapter)) adapter->rss_flags |= RSS_ENABLE_UDP_IPV4 | RSS_ENABLE_UDP_IPV6; + } else { + /* Disable RSS, if only default RX Q is created */ + adapter->rss_flags = RSS_ENABLE_NONE; + } - rc = be_cmd_rss_config(adapter, rsstable, adapter->rss_flags, - 128); - if (rc) { - adapter->rss_flags = 0; - return rc; - } + rc = be_cmd_rss_config(adapter, rsstable, adapter->rss_flags, + 128); + if (rc) { + adapter->rss_flags = RSS_ENABLE_NONE; + return rc; } /* First time posting */ -- cgit v1.2.3 From 5eeff6354faffb3f140d690eec1cede78de53b06 Mon Sep 17 00:00:00 2001 From: Suresh Reddy Date: Mon, 6 Jan 2014 13:02:24 +0530 Subject: be2net: increase the timeout value for loopback-test FW cmd The loopback test FW cmd may need upto 15 seconds to complete on certain PHYs. This patch also fixes the name of the completion variable used to synchronize FW cmd completions as it not used by the flashing cmd alone anymore. Signed-off-by: Suresh Reddy Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 2 +- drivers/net/ethernet/emulex/benet/be_cmds.c | 30 +++++++++++++++++++---------- drivers/net/ethernet/emulex/benet/be_main.c | 2 +- 3 files changed, 22 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index 5878df619b53..2e031f24cd33 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -480,7 +480,7 @@ struct be_adapter { struct list_head entry; u32 flash_status; - struct completion flash_compl; + struct completion et_cmd_compl; struct be_resources res; /* resources available for the func */ u16 num_vfs; /* Number of VFs provisioned by PF */ diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c index b84902e451fa..94c35c8d799d 100644 --- a/drivers/net/ethernet/emulex/benet/be_cmds.c +++ b/drivers/net/ethernet/emulex/benet/be_cmds.c @@ -141,11 +141,17 @@ static int be_mcc_compl_process(struct be_adapter *adapter, subsystem = resp_hdr->subsystem; } + if (opcode == OPCODE_LOWLEVEL_LOOPBACK_TEST && + subsystem == CMD_SUBSYSTEM_LOWLEVEL) { + complete(&adapter->et_cmd_compl); + return 0; + } + if (((opcode == OPCODE_COMMON_WRITE_FLASHROM) || (opcode == OPCODE_COMMON_WRITE_OBJECT)) && (subsystem == CMD_SUBSYSTEM_COMMON)) { adapter->flash_status = compl_status; - complete(&adapter->flash_compl); + complete(&adapter->et_cmd_compl); } if (compl_status == MCC_STATUS_SUCCESS) { @@ -2163,7 +2169,7 @@ int lancer_cmd_write_object(struct be_adapter *adapter, struct be_dma_mem *cmd, be_mcc_notify(adapter); spin_unlock_bh(&adapter->mcc_lock); - if (!wait_for_completion_timeout(&adapter->flash_compl, + if (!wait_for_completion_timeout(&adapter->et_cmd_compl, msecs_to_jiffies(60000))) status = -1; else @@ -2258,8 +2264,8 @@ int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd, be_mcc_notify(adapter); spin_unlock_bh(&adapter->mcc_lock); - if (!wait_for_completion_timeout(&adapter->flash_compl, - msecs_to_jiffies(40000))) + if (!wait_for_completion_timeout(&adapter->et_cmd_compl, + msecs_to_jiffies(40000))) status = -1; else status = adapter->flash_status; @@ -2370,6 +2376,7 @@ int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, { struct be_mcc_wrb *wrb; struct be_cmd_req_loopback_test *req; + struct be_cmd_resp_loopback_test *resp; int status; spin_lock_bh(&adapter->mcc_lock); @@ -2384,8 +2391,8 @@ int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_LOWLEVEL, OPCODE_LOWLEVEL_LOOPBACK_TEST, sizeof(*req), wrb, NULL); - req->hdr.timeout = cpu_to_le32(4); + req->hdr.timeout = cpu_to_le32(15); req->pattern = cpu_to_le64(pattern); req->src_port = cpu_to_le32(port_num); req->dest_port = cpu_to_le32(port_num); @@ -2393,12 +2400,15 @@ int be_cmd_loopback_test(struct be_adapter *adapter, u32 port_num, req->num_pkts = cpu_to_le32(num_pkts); req->loopback_type = cpu_to_le32(loopback_type); - status = be_mcc_notify_wait(adapter); - if (!status) { - struct be_cmd_resp_loopback_test *resp = embedded_payload(wrb); - status = le32_to_cpu(resp->status); - } + be_mcc_notify(adapter); + + spin_unlock_bh(&adapter->mcc_lock); + wait_for_completion(&adapter->et_cmd_compl); + resp = embedded_payload(wrb); + status = le32_to_cpu(resp->status); + + return status; err: spin_unlock_bh(&adapter->mcc_lock); return status; diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 6b774a5279af..fa44bba4f93b 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4208,7 +4208,7 @@ static int be_ctrl_init(struct be_adapter *adapter) spin_lock_init(&adapter->mcc_lock); spin_lock_init(&adapter->mcc_cq_lock); - init_completion(&adapter->flash_compl); + init_completion(&adapter->et_cmd_compl); pci_save_state(adapter->pdev); return 0; -- cgit v1.2.3 From e3dc867c1758fc4ae6fc6b63ea6bbcd454479f08 Mon Sep 17 00:00:00 2001 From: Suresh Reddy Date: Mon, 6 Jan 2014 13:02:25 +0530 Subject: be2net: fix max_evt_qs calculation for BE3 in SR-IOV config The driver wrongly assumes 16 EQs/vectors are available for each BE3 PF. When SR-IOV is enabled, a BE3 PF can support only a max of 8 EQs. Signed-off-by: Suresh Reddy Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be.h | 1 + drivers/net/ethernet/emulex/benet/be_main.c | 12 ++++++++---- 2 files changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h index 2e031f24cd33..4ccaf9af6fc9 100644 --- a/drivers/net/ethernet/emulex/benet/be.h +++ b/drivers/net/ethernet/emulex/benet/be.h @@ -104,6 +104,7 @@ static inline char *nic_name(struct pci_dev *pdev) #define BE3_MAX_RSS_QS 16 #define BE3_MAX_TX_QS 16 #define BE3_MAX_EVT_QS 16 +#define BE3_SRIOV_MAX_EVT_QS 8 #define MAX_RX_QS 32 #define MAX_EVT_QS 32 diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index fa44bba4f93b..bf40fdaecfa3 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -3127,11 +3127,11 @@ static void BEx_get_resources(struct be_adapter *adapter, { struct pci_dev *pdev = adapter->pdev; bool use_sriov = false; + int max_vfs; - if (BE3_chip(adapter) && sriov_want(adapter)) { - int max_vfs; + max_vfs = pci_sriov_get_totalvfs(pdev); - max_vfs = pci_sriov_get_totalvfs(pdev); + if (BE3_chip(adapter) && sriov_want(adapter)) { res->max_vfs = max_vfs > 0 ? min(MAX_VFS, max_vfs) : 0; use_sriov = res->max_vfs; } @@ -3162,7 +3162,11 @@ static void BEx_get_resources(struct be_adapter *adapter, BE3_MAX_RSS_QS : BE2_MAX_RSS_QS; res->max_rx_qs = res->max_rss_qs + 1; - res->max_evt_qs = be_physfn(adapter) ? BE3_MAX_EVT_QS : 1; + if (be_physfn(adapter)) + res->max_evt_qs = (max_vfs > 0) ? + BE3_SRIOV_MAX_EVT_QS : BE3_MAX_EVT_QS; + else + res->max_evt_qs = 1; res->if_cap_flags = BE_IF_CAP_FLAGS_WANT; if (!(adapter->function_caps & BE_FUNCTION_CAPS_RSS)) -- cgit v1.2.3 From 22d3b76ed7d2a02bca513b113f2613b9b6e61d58 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 5 Jan 2014 20:31:39 -0800 Subject: isdn: Drop big endian cpp checks from telespci and hfc_pci drivers With arm:allmodconfig, building the Teles PCI driver fails with telespci.c:294:2: error: #error "not running on big endian machines now" Similar, building the driver for HFC PCI-Bus cards fails with hfc_pci.c:1647:2: error: #error "not running on big endian machines now" Remove the big endian cpp check from both drivers to fix the build errors. Signed-off-by: Guenter Roeck Signed-off-by: David S. Miller --- drivers/isdn/hisax/hfc_pci.c | 4 ---- drivers/isdn/hisax/telespci.c | 4 ---- 2 files changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c index 497bd026c237..4a4825528188 100644 --- a/drivers/isdn/hisax/hfc_pci.c +++ b/drivers/isdn/hisax/hfc_pci.c @@ -1643,10 +1643,6 @@ setup_hfcpci(struct IsdnCard *card) int i; struct pci_dev *tmp_hfcpci = NULL; -#ifdef __BIG_ENDIAN -#error "not running on big endian machines now" -#endif - strcpy(tmp, hfcpci_revision); printk(KERN_INFO "HiSax: HFC-PCI driver Rev. %s\n", HiSax_getrev(tmp)); diff --git a/drivers/isdn/hisax/telespci.c b/drivers/isdn/hisax/telespci.c index f6ab63aa6995..33eeb4602c7e 100644 --- a/drivers/isdn/hisax/telespci.c +++ b/drivers/isdn/hisax/telespci.c @@ -290,10 +290,6 @@ int setup_telespci(struct IsdnCard *card) struct IsdnCardState *cs = card->cs; char tmp[64]; -#ifdef __BIG_ENDIAN -#error "not running on big endian machines now" -#endif - strcpy(tmp, telespci_revision); printk(KERN_INFO "HiSax: Teles/PCI driver Rev. %s\n", HiSax_getrev(tmp)); if (cs->typ != ISDN_CTYPE_TELESPCI) -- cgit v1.2.3 From e5e97ee956d8c5ed2fc5877d29dee17a6a59de8e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 6 Jan 2014 10:07:29 -0600 Subject: hso: fix handling of modem port SERIAL_STATE notifications The existing serial state notification handling expected older Option devices, having a hardcoded assumption that the Modem port was always USB interface #2. That isn't true for devices from the past few years. hso_serial_state_notification is a local cache of a USB Communications Interface Class SERIAL_STATE notification from the device, and the USB CDC specification (section 6.3, table 67 "Class-Specific Notifications") defines wIndex as the USB interface the event applies to. For hso devices this will always be the Modem port, as the Modem port is the only port which is set up to receive them by the driver. So instead of always expecting USB interface #2, instead validate the notification with the actual USB interface number of the Modem port. Signed-off-by: Dan Williams Tested-by: H. Nikolaus Schaller Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 86292e6aaf49..1a482344b3f5 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -185,7 +185,6 @@ enum rx_ctrl_state{ #define BM_REQUEST_TYPE (0xa1) #define B_NOTIFICATION (0x20) #define W_VALUE (0x0) -#define W_INDEX (0x2) #define W_LENGTH (0x2) #define B_OVERRUN (0x1<<6) @@ -1487,6 +1486,7 @@ static void tiocmget_intr_callback(struct urb *urb) struct uart_icount *icount; struct hso_serial_state_notification *serial_state_notification; struct usb_device *usb; + int if_num; /* Sanity checks */ if (!serial) @@ -1495,15 +1495,24 @@ static void tiocmget_intr_callback(struct urb *urb) handle_usb_error(status, __func__, serial->parent); return; } + + /* tiocmget is only supported on HSO_PORT_MODEM */ tiocmget = serial->tiocmget; if (!tiocmget) return; + BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM); + usb = serial->parent->usb; + if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber; + + /* wIndex should be the USB interface number of the port to which the + * notification applies, which should always be the Modem port. + */ serial_state_notification = &tiocmget->serial_state_notification; if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE || serial_state_notification->bNotification != B_NOTIFICATION || le16_to_cpu(serial_state_notification->wValue) != W_VALUE || - le16_to_cpu(serial_state_notification->wIndex) != W_INDEX || + le16_to_cpu(serial_state_notification->wIndex) != if_num || le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) { dev_warn(&usb->dev, "hso received invalid serial state notification\n"); -- cgit v1.2.3