From d79c3888bde6581da7ff9f9d6f581900ecb5e632 Mon Sep 17 00:00:00 2001 From: Arthur Kiyanovski Date: Tue, 9 Oct 2018 11:21:27 +0300 Subject: net: ena: fix warning in rmmod caused by double iounmap Memory mapped with devm_ioremap is automatically freed when the driver is disconnected from the device. Therefore there is no need to explicitly call devm_iounmap. Fixes: 0857d92f71b6 ("net: ena: add missing unmap bars on device removal") Fixes: 411838e7b41c ("net: ena: fix rare kernel crash when bar memory remap fails") Signed-off-by: Arthur Kiyanovski Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 25621a218f20..78d84ca0a378 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -3099,15 +3099,8 @@ err_rss_init: static void ena_release_bars(struct ena_com_dev *ena_dev, struct pci_dev *pdev) { - int release_bars; + int release_bars = pci_select_bars(pdev, IORESOURCE_MEM) & ENA_BAR_MASK; - if (ena_dev->mem_bar) - devm_iounmap(&pdev->dev, ena_dev->mem_bar); - - if (ena_dev->reg_bar) - devm_iounmap(&pdev->dev, ena_dev->reg_bar); - - release_bars = pci_select_bars(pdev, IORESOURCE_MEM) & ENA_BAR_MASK; pci_release_selected_regions(pdev, release_bars); } -- cgit v1.2.3 From d7703ddbd7c9cb1ab7c08e1b85b314ff8cea38e9 Mon Sep 17 00:00:00 2001 From: Arthur Kiyanovski Date: Tue, 9 Oct 2018 11:21:28 +0300 Subject: net: ena: fix rare bug when failed restart/resume is followed by driver removal In a rare scenario when ena_device_restore() fails, followed by device remove, an FLR will not be issued. In this case, the device will keep sending asynchronous AENQ keep-alive events, even after driver removal, leading to memory corruption. Fixes: 8c5c7abdeb2d ("net: ena: add power management ops to the ENA driver") Signed-off-by: Arthur Kiyanovski Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 78d84ca0a378..ce18e07ff5ad 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -2619,7 +2619,11 @@ err_disable_msix: ena_free_mgmnt_irq(adapter); ena_disable_msix(adapter); err_device_destroy: + ena_com_abort_admin_commands(ena_dev); + ena_com_wait_for_abort_completion(ena_dev); ena_com_admin_destroy(ena_dev); + ena_com_mmio_reg_read_request_destroy(ena_dev); + ena_com_dev_reset(ena_dev, ENA_REGS_RESET_DRIVER_INVALID_STATE); err: clear_bit(ENA_FLAG_DEVICE_RUNNING, &adapter->flags); clear_bit(ENA_FLAG_ONGOING_RESET, &adapter->flags); -- cgit v1.2.3 From 78a55d05def95144ca5fa9a64c49b2a0636a9866 Mon Sep 17 00:00:00 2001 From: Arthur Kiyanovski Date: Tue, 9 Oct 2018 11:21:29 +0300 Subject: net: ena: fix NULL dereference due to untimely napi initialization napi poll functions should be initialized before running request_irq(), to handle a rare condition where there is a pending interrupt, causing the ISR to fire immediately while the poll function wasn't set yet, causing a NULL dereference. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index ce18e07ff5ad..d906293ce07d 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -1575,8 +1575,6 @@ static int ena_up_complete(struct ena_adapter *adapter) if (rc) return rc; - ena_init_napi(adapter); - ena_change_mtu(adapter->netdev, adapter->netdev->mtu); ena_refill_all_rx_bufs(adapter); @@ -1730,6 +1728,13 @@ static int ena_up(struct ena_adapter *adapter) ena_setup_io_intr(adapter); + /* napi poll functions should be initialized before running + * request_irq(), to handle a rare condition where there is a pending + * interrupt, causing the ISR to fire immediately while the poll + * function wasn't set yet, causing a null dereference + */ + ena_init_napi(adapter); + rc = ena_request_io_irq(adapter); if (rc) goto err_req_irq; -- cgit v1.2.3 From 248ab77342d0453f067b666b36f0f517ea66c361 Mon Sep 17 00:00:00 2001 From: Arthur Kiyanovski Date: Tue, 9 Oct 2018 11:21:30 +0300 Subject: net: ena: fix auto casting to boolean Eliminate potential auto casting compilation error. Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Arthur Kiyanovski Signed-off-by: David S. Miller --- drivers/net/ethernet/amazon/ena/ena_eth_com.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amazon/ena/ena_eth_com.c b/drivers/net/ethernet/amazon/ena/ena_eth_com.c index 1c682b76190f..2b3ff0c20155 100644 --- a/drivers/net/ethernet/amazon/ena/ena_eth_com.c +++ b/drivers/net/ethernet/amazon/ena/ena_eth_com.c @@ -245,11 +245,11 @@ static inline void ena_com_rx_set_flags(struct ena_com_rx_ctx *ena_rx_ctx, (cdesc->status & ENA_ETH_IO_RX_CDESC_BASE_L4_PROTO_IDX_MASK) >> ENA_ETH_IO_RX_CDESC_BASE_L4_PROTO_IDX_SHIFT; ena_rx_ctx->l3_csum_err = - (cdesc->status & ENA_ETH_IO_RX_CDESC_BASE_L3_CSUM_ERR_MASK) >> - ENA_ETH_IO_RX_CDESC_BASE_L3_CSUM_ERR_SHIFT; + !!((cdesc->status & ENA_ETH_IO_RX_CDESC_BASE_L3_CSUM_ERR_MASK) >> + ENA_ETH_IO_RX_CDESC_BASE_L3_CSUM_ERR_SHIFT); ena_rx_ctx->l4_csum_err = - (cdesc->status & ENA_ETH_IO_RX_CDESC_BASE_L4_CSUM_ERR_MASK) >> - ENA_ETH_IO_RX_CDESC_BASE_L4_CSUM_ERR_SHIFT; + !!((cdesc->status & ENA_ETH_IO_RX_CDESC_BASE_L4_CSUM_ERR_MASK) >> + ENA_ETH_IO_RX_CDESC_BASE_L4_CSUM_ERR_SHIFT); ena_rx_ctx->hash = cdesc->hash; ena_rx_ctx->frag = (cdesc->status & ENA_ETH_IO_RX_CDESC_BASE_IPV4_FRAG_MASK) >> -- cgit v1.2.3 From 4f7617705bfff84d756fe4401a1f4f032f374984 Mon Sep 17 00:00:00 2001 From: Giacinto Cifelli Date: Wed, 10 Oct 2018 20:05:53 +0200 Subject: qmi_wwan: Added support for Gemalto's Cinterion ALASxx WWAN interface MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Added support for Gemalto's Cinterion ALASxx WWAN interfaces by adding QMI_FIXED_INTF with Cinterion's VID and PID. Signed-off-by: Giacinto Cifelli Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 533b6fb8d923..72a55b6b4211 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1241,6 +1241,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x0b3c, 0xc00b, 4)}, /* Olivetti Olicard 500 */ {QMI_FIXED_INTF(0x1e2d, 0x0060, 4)}, /* Cinterion PLxx */ {QMI_FIXED_INTF(0x1e2d, 0x0053, 4)}, /* Cinterion PHxx,PXxx */ + {QMI_FIXED_INTF(0x1e2d, 0x0063, 10)}, /* Cinterion ALASxx (1 RmNet) */ {QMI_FIXED_INTF(0x1e2d, 0x0082, 4)}, /* Cinterion PHxx,PXxx (2 RmNet) */ {QMI_FIXED_INTF(0x1e2d, 0x0082, 5)}, /* Cinterion PHxx,PXxx (2 RmNet) */ {QMI_FIXED_INTF(0x1e2d, 0x0083, 4)}, /* Cinterion PHxx,PXxx (1 RmNet + USB Audio)*/ -- cgit v1.2.3 From 26450608348e91a782691dbfcc836478f4381071 Mon Sep 17 00:00:00 2001 From: Moshe Shemesh Date: Thu, 11 Oct 2018 15:01:19 +0300 Subject: net/mlx4_core: Fix warnings during boot on driverinit param set failures During boot, mlx4_core sets the driverinit configuration parameters and updates the devlink module on the initial values calling devlink_param_driverinit_value_set(). If devlink_param_driverinit_value_set() returns an error mlx4_core reports kernel module warning. This caused false alarm during boot in case kernel was compiled with CONFIG_NET_DEVLINK off. Fix by removing warning reported in case devlink_param_driverinit_value_set() fails. This actually makes the function mlx4_devlink_set_init_value() redundant to using directly devlink_param_driverinit_value_set() and so removed. It fixes the following kernel trace: mlx4_core 0000:00:06.0: devlink set parameter 0 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 1 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 4 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 5 value failed (err = -95) mlx4_core 0000:00:06.0: devlink set parameter 3 value failed (err = -95) Fixes: bd1b51dc66df ("mlx4: Add mlx4 initial parameters table and register it") Signed-off-by: Moshe Shemesh Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 43 +++++++++++-------------------- 1 file changed, 15 insertions(+), 28 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index d2d59444f562..6a046030e873 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -260,47 +260,34 @@ static const struct devlink_param mlx4_devlink_params[] = { NULL, NULL, NULL), }; -static void mlx4_devlink_set_init_value(struct devlink *devlink, u32 param_id, - union devlink_param_value init_val) -{ - struct mlx4_priv *priv = devlink_priv(devlink); - struct mlx4_dev *dev = &priv->dev; - int err; - - err = devlink_param_driverinit_value_set(devlink, param_id, init_val); - if (err) - mlx4_warn(dev, - "devlink set parameter %u value failed (err = %d)", - param_id, err); -} - static void mlx4_devlink_set_params_init_values(struct devlink *devlink) { union devlink_param_value value; value.vbool = !!mlx4_internal_err_reset; - mlx4_devlink_set_init_value(devlink, - DEVLINK_PARAM_GENERIC_ID_INT_ERR_RESET, - value); + devlink_param_driverinit_value_set(devlink, + DEVLINK_PARAM_GENERIC_ID_INT_ERR_RESET, + value); value.vu32 = 1UL << log_num_mac; - mlx4_devlink_set_init_value(devlink, - DEVLINK_PARAM_GENERIC_ID_MAX_MACS, value); + devlink_param_driverinit_value_set(devlink, + DEVLINK_PARAM_GENERIC_ID_MAX_MACS, + value); value.vbool = enable_64b_cqe_eqe; - mlx4_devlink_set_init_value(devlink, - MLX4_DEVLINK_PARAM_ID_ENABLE_64B_CQE_EQE, - value); + devlink_param_driverinit_value_set(devlink, + MLX4_DEVLINK_PARAM_ID_ENABLE_64B_CQE_EQE, + value); value.vbool = enable_4k_uar; - mlx4_devlink_set_init_value(devlink, - MLX4_DEVLINK_PARAM_ID_ENABLE_4K_UAR, - value); + devlink_param_driverinit_value_set(devlink, + MLX4_DEVLINK_PARAM_ID_ENABLE_4K_UAR, + value); value.vbool = false; - mlx4_devlink_set_init_value(devlink, - DEVLINK_PARAM_GENERIC_ID_REGION_SNAPSHOT, - value); + devlink_param_driverinit_value_set(devlink, + DEVLINK_PARAM_GENERIC_ID_REGION_SNAPSHOT, + value); } static inline void mlx4_set_num_reserved_uars(struct mlx4_dev *dev, -- cgit v1.2.3 From 2a1e89df785082a0fd7264ca6d3d834abe84fa25 Mon Sep 17 00:00:00 2001 From: Ilias Apalodimas Date: Thu, 11 Oct 2018 15:28:26 +0300 Subject: net: socionext: clear rx irq correctly commit 63ae7949e94a ("net: socionext: Use descriptor info instead of MMIO reads on Rx") removed constant mmio reads from the driver and started using a descriptor field to check if packet should be processed. This lead the napi rx handler being constantly called while no packets needed processing and ksoftirq getting 100% cpu usage. Issue one mmio read to clear the irq correcty after processing packets Signed-off-by: Ilias Apalodimas Reported-by: Ard Biesheuvel Tested-by: Ard Biesheuvel Acked-by: Ard Biesheuvel Signed-off-by: David S. Miller --- drivers/net/ethernet/socionext/netsec.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c index 7aa5ebb6766c..4289ccb26e4e 100644 --- a/drivers/net/ethernet/socionext/netsec.c +++ b/drivers/net/ethernet/socionext/netsec.c @@ -735,8 +735,11 @@ static int netsec_process_rx(struct netsec_priv *priv, int budget) u16 idx = dring->tail; struct netsec_de *de = dring->vaddr + (DESC_SZ * idx); - if (de->attr & (1U << NETSEC_RX_PKT_OWN_FIELD)) + if (de->attr & (1U << NETSEC_RX_PKT_OWN_FIELD)) { + /* reading the register clears the irq */ + netsec_read(priv, NETSEC_REG_NRM_RX_PKTCNT); break; + } /* This barrier is needed to keep us from reading * any other fields out of the netsec_de until we have -- cgit v1.2.3 From 511cfd580f23b0e0fcd5659931ef14c6e2c062b0 Mon Sep 17 00:00:00 2001 From: "Maciej S. Szmigiero" Date: Thu, 11 Oct 2018 16:02:10 +0200 Subject: r8169: set RX_MULTI_EN bit in RxConfig for 8168F-family chips It has been reported that since commit 05212ba8132b42 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices") at least RTL_GIGA_MAC_VER_38 NICs work erratically after a resume from suspend. The problem has been traced to a missing RX_MULTI_EN bit in the RxConfig register. We already set this bit for RTL_GIGA_MAC_VER_35 NICs of the same 8168F chip family so let's do it also for its other siblings: RTL_GIGA_MAC_VER_36 and RTL_GIGA_MAC_VER_38. Curiously, the NIC seems to work fine after a system boot without having this bit set as long as the system isn't suspended and resumed. Fixes: 05212ba8132b42 ("r8169: set RxConfig after tx/rx is enabled for RTL8169sb/8110sb devices") Reported-by: Chris Clayton Signed-off-by: Maciej S. Szmigiero Reviewed-by: Heiner Kallweit Tested-by: Chris Clayton Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 9a5e2969df61..3a5e6160bf0d 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -4282,8 +4282,8 @@ static void rtl_init_rxcfg(struct rtl8169_private *tp) RTL_W32(tp, RxConfig, RX_FIFO_THRESH | RX_DMA_BURST); break; case RTL_GIGA_MAC_VER_18 ... RTL_GIGA_MAC_VER_24: - case RTL_GIGA_MAC_VER_34: - case RTL_GIGA_MAC_VER_35: + case RTL_GIGA_MAC_VER_34 ... RTL_GIGA_MAC_VER_36: + case RTL_GIGA_MAC_VER_38: RTL_W32(tp, RxConfig, RX128_INT_EN | RX_MULTI_EN | RX_DMA_BURST); break; case RTL_GIGA_MAC_VER_40 ... RTL_GIGA_MAC_VER_51: -- cgit v1.2.3 From 052858663db31bd1ead76744df5d39d8bb703c77 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Thu, 11 Oct 2018 17:06:21 +0200 Subject: net: phy: sfp: remove sfp_mutex's definition The sfp_mutex variable is defined but never used in this file. Not even in the commit that introduced that variable. Remove sfp_mutex, it has no purpose. Cc: Andrew Lunn Cc: Florian Fainelli Cc: "David S. Miller" Signed-off-by: Sebastian Andrzej Siewior Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/sfp.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index 6e13b8832bc7..fd8bb998ae52 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -163,8 +163,6 @@ static const enum gpiod_flags gpio_flags[] = { /* Give this long for the PHY to reset. */ #define T_PHY_RESET_MS 50 -static DEFINE_MUTEX(sfp_mutex); - struct sff_data { unsigned int gpios; bool (*module_supported)(const struct sfp_eeprom_id *id); -- cgit v1.2.3 From bf3b452b7af787b8bf27de6490dc4eedf6f97599 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 9 Oct 2018 16:48:57 -0700 Subject: net: dsa: bcm_sf2: Fix unbind ordering The order in which we release resources is unfortunately leading to bus errors while dismantling the port. This is because we set priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now permissible to clock gate the switch. Later on, when dsa_slave_destroy() comes in from dsa_unregister_switch() and calls dsa_switch_ops::port_disable, we perform the same dismantling again, and this time we hit registers that are clock gated. Make sure that dsa_unregister_switch() is the first thing that happens, which takes care of releasing all user visible resources, then proceed with clock gating hardware. We still need to set priv->wol_ports_mask to 0 to make sure that an enabled port properly gets disabled in case it was previously used as part of Wake-on-LAN. Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index e0066adcd2f3..b6d8e849a949 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -1173,10 +1173,10 @@ static int bcm_sf2_sw_remove(struct platform_device *pdev) { struct bcm_sf2_priv *priv = platform_get_drvdata(pdev); - /* Disable all ports and interrupts */ priv->wol_ports_mask = 0; - bcm_sf2_sw_suspend(priv->dev->ds); dsa_unregister_switch(priv->dev->ds); + /* Disable all ports and interrupts */ + bcm_sf2_sw_suspend(priv->dev->ds); bcm_sf2_mdio_unregister(priv); return 0; -- cgit v1.2.3 From 54baca096386d862d19c10f58f34bf787c6b3cbe Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 9 Oct 2018 16:48:58 -0700 Subject: net: dsa: bcm_sf2: Call setup during switch resume There is no reason to open code what the switch setup function does, in fact, because we just issued a switch reset, we would make all the register get their default values, including for instance, having unused port be enabled again and wasting power and leading to an inappropriate switch core clock being selected. Fixes: 8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index b6d8e849a949..fc8b48adf38b 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -703,7 +703,6 @@ static int bcm_sf2_sw_suspend(struct dsa_switch *ds) static int bcm_sf2_sw_resume(struct dsa_switch *ds) { struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); - unsigned int port; int ret; ret = bcm_sf2_sw_rst(priv); @@ -715,14 +714,7 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds) if (priv->hw_params.num_gphy == 1) bcm_sf2_gphy_enable_set(ds, true); - for (port = 0; port < DSA_MAX_PORTS; port++) { - if (dsa_is_user_port(ds, port)) - bcm_sf2_port_setup(ds, port, NULL); - else if (dsa_is_cpu_port(ds, port)) - bcm_sf2_imp_setup(ds, port); - } - - bcm_sf2_enable_acb(ds); + ds->ops->setup(ds); return 0; } -- cgit v1.2.3