From ef39a1bf3c4fbdea085c618be424cc88b803f248 Mon Sep 17 00:00:00 2001 From: Denis Turischev Date: Thu, 21 Jan 2010 16:10:07 +0200 Subject: [WATCHDOG] sbc_fitpc2_wdt: fix I/O space access technique. The mdelay function was used between I/O access commands, that causes peak in CPU usage. Fix it by substitution mdelay to msleep. Expand usage on fitPC2 compatible boards according to DMI identification. Signed-off-by: Denis Turischev Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Kconfig | 4 ++-- drivers/watchdog/sbc_fitpc2_wdt.c | 11 +++++------ 2 files changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers/watchdog') diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 088f32f29a6e..050ee147592f 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -396,8 +396,8 @@ config SBC_FITPC2_WATCHDOG tristate "Compulab SBC-FITPC2 watchdog" depends on X86 ---help--- - This is the driver for the built-in watchdog timer on the fit-PC2 - Single-board computer made by Compulab. + This is the driver for the built-in watchdog timer on the fit-PC2, + fit-PC2i, CM-iAM single-board computers made by Compulab. It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux. When "Watchdog Timer Value" enabled one can set 31-255 s operational range. diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c index 91430a89107c..e6763d2a567b 100644 --- a/drivers/watchdog/sbc_fitpc2_wdt.c +++ b/drivers/watchdog/sbc_fitpc2_wdt.c @@ -46,9 +46,9 @@ static DEFINE_SPINLOCK(wdt_lock); static void wdt_send_data(unsigned char command, unsigned char data) { outb(command, COMMAND_PORT); - mdelay(100); + msleep(100); outb(data, DATA_PORT); - mdelay(200); + msleep(200); } static void wdt_enable(void) @@ -202,11 +202,10 @@ static int __init fitpc2_wdt_init(void) { int err; - if (strcmp("SBC-FITPC2", dmi_get_system_info(DMI_BOARD_NAME))) { - pr_info("board name is: %s. Should be SBC-FITPC2\n", - dmi_get_system_info(DMI_BOARD_NAME)); + if (!strstr(dmi_get_system_info(DMI_BOARD_NAME), "SBC-FITPC2")) return -ENODEV; - } + + pr_info("%s found\n", dmi_get_system_info(DMI_BOARD_NAME)); if (!request_region(COMMAND_PORT, 1, WATCHDOG_NAME)) { pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT); -- cgit v1.2.3